Document Center List of Standards on Protective Clothing Including Flameproof Clothing
ICS Code 13.340.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D6544 - Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM-D6603 - Standard Specification for Labeling of UV-Protective Textiles
- ASTM-E1549 - Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
- ASTM-E1809 - Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer (Withdrawn 2010)
- ASTM-E2875 - Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
- ASTM-E2902 - Standard Practice for Measurement of Body Armor Wearers (Withdrawn 2019)
- ASTM-E3003 - Standard Practice for Body Armor Wearer Measurement and Fitting of Armor
- ASTM-ES21 - Test Method for Resistance of Protective Clothing Materials to Synthetic Blood (Withdrawn 1995)
- ASTM-F1001 - Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
- ASTM-F1002 - Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards
- ASTM-F1052 - Standard Test Method for Pressure Testing Vapor Protective Suits
- ASTM-F1060 - Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR)
- ASTM-F1154 - Standard Practices for Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles, Ensemble Elements, and Other Components
- ASTM-F1194 - Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
- ASTM-F1296 - Standard Guide for Evaluating Chemical Protective Clothing
- ASTM-F1301 - Standard Practice for Labeling Chemical Protective Clothing
- ASTM-F1342 - Standard Test Method for Protective Clothing Material Resistance to Puncture
- ASTM-F1358 - Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
- ASTM-F1359 - Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Manikin
- ASTM-F1383 - Standard Test Method for Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Intermittent Contact
- ASTM-F1407 - Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method
- ASTM-F1414 - Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing
- ASTM-F1449 - Standard Guide for Industrial Laundering of Flame, Thermal, and Arc Resistant Clothing
- ASTM-F1458 - Standard Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices
- ASTM-F1461 - Standard Practice for Chemical Protective Clothing Program
- ASTM-F1631 - Standard Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for the Sport of Fencing (Withdrawn 2003)
- ASTM-F1670 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
- ASTM-F1671 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
- ASTM-F1731 - Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
- ASTM-F1790 - Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment
- ASTM-F1819 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
- ASTM-F1823 - Standard Guide for Water Rescue Personal Flotation Device (PFD)
- ASTM-F1868 - Standard Test Method for Thermal Resistance, Evaporative Resistance, and Total Heat Loss Measurements of Clothing Materials Using a Sweating Hot Plate
- ASTM-F1891 - Standard Specification for Arc and Flame Resistant Rainwear
- ASTM-F1897 - Standard Specification for Leg Protection for Chain Saw Users
- ASTM-F1930 - Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
- ASTM-F1937 - Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding
- ASTM-F1939 - Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
- ASTM-F2053 - Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials
- ASTM-F2061 - Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions
- ASTM-F2130 - Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials (Withdrawn 2023)
- ASTM-F2302 - Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame
- ASTM-F2320 - Standard Specification for Rubber Insulating Sheeting
- ASTM-F2407 - Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities
- ASTM-F2588 - Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles
- ASTM-F2668 - Standard Practice for Determining the Physiological Responses of the Wearer to Protective Clothing Ensembles
- ASTM-F2669 - Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides (Withdrawn 2023)
- ASTM-F2675 - Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
- ASTM-F2681 - Standard Specification for Body Protectors Used in Equine Racing
- ASTM-F2700 - Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating
- ASTM-F2701 - Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash (Withdrawn 2017)
- ASTM-F2702 - Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction (Withdrawn 2020)
- ASTM-F2703 - Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Burn Injury Prediction
- ASTM-F2731 - Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
- ASTM-F2733 - Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards
- ASTM-F2815 - Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program (Withdrawn 2019)
- ASTM-F2878 - Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
- ASTM-F2962 - Standard Practice for Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides (Withdrawn 2019)
- ASTM-F2992 - Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer Test Equipment
- ASTM-F3050 - Standard Guide for Conformity Assessment of Personal Protective Clothing and Equipment
- ASTM-F739 - Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
- ASTM-F903 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
- ASTM-F955 - Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
BSI:
- BS-10999 - Specification for distress signal units for the fire and rescue service
- BS-1651 - Specification for industrial gloves
- BS-1870-1 - Safety Footwear, Specification for Safety Footwear Other Than All-Rubber & All-Plastic
- BS-1870-2 - Safety Footwear, Specification for Lined Rubber Safety Boots
- BS-1870-3 - Safety Footwear, Specification for Polyvinyl Chloride Moulded Safety Footwear
- BS-2495 - Specification for protective helmets for vehicle users (high protection)
- BS-2653 - Specification for protective clothing for welders
- BS-3314 - Specification for protective aprons for wet work
- BS-3783 - Specification for X-ray lead-rubber protective aprons for personal use
- BS-4679 - Protective Suits for Construction Workers and Others in Similar Arduous Activities
- BS-4972 - Specification for women's protective footwear.
- BS-5240-1 - Industrial safety helmets. Specification for construction and performance
- BS-5426 - Specification for workwear and career wear
- BS-5462-1 - Footwear with midsole protection. Specification for lined vulcanized rubber footwear with penetration resistant midsoles
- BS-5462-2 - Footwear with midsole protection. Specification for lined or unlined polyvinyl chloride (PVC) footwear with penetration resistant midsoles
- BS-6183-1 - Protective equipment for cricketers
- BS-6183-2 - Protective equipment for cricketers
- BS-6183-3 - Protective equipment for cricketers
- BS-6183-4 - Protective equipment for cricketers
- BS-6249-1 - Materials and material assemblies used in clothing for protection against heat and flame. Specification for flammability testing and performance
- BS-6408 - Specification for clothing made from coated fabrics for protection against wet weather
- BS-6967 - Glossary of terms for personal eye-protection
- BS-7184 - Selection, use and maintenance of chemical protective clothing. Guidance
- BS-7971-1 - Protective clothing and equipment for use in violent situations and in training
- BS-7971-10 - Protective clothing and equipment for use in violent situations and in training
- BS-7971-11 - Protective clothing and equipment for use in violent situations and in training
- BS-7971-2 - Protective clothing and equipment for use in violent situations and in training
- BS-7971-4 - Protective clothing and equipment for use in violent situations and in training
- BS-7971-5 - Protective clothing and equipment for use in violent situations and in training
- BS-7971-6 - Protective clothing and equipment for use in violent situations and in training
- BS-7971-8 - Protective clothing and equipment for use in violent situations and in training
- BS-8467 - Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods
- BS-8617 - Personal protective equipment for firefighters. Cleaning, maintenance and repair. Code of practice
- BS-8617 COMBO - Personal protective equipment for firefighters. Code of practice for cleaning, maintenance and repair
- BS-8617 COMMENTARY - Expert Commentary for BS 8617:2019. Personal protective equipment for firefighters. Code of practice for cleaning, maintenance and repair
- BS-953 - Methods of Test for Safety & Protective Footwear
- BS-EN-1073-1 - Protective clothing against solid airborne particles including radioactive contamination
- BS-EN-1073-2 - Protective clothing against radioactive contamination
- BS-EN-1082-2 - Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives
- BS-EN-1082-3 - Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives
- BS-EN-1149-1 - Protective clothing. Electrostatic properties
- BS-EN-1149-2 - Protective clothing. Electrostatic properties
- BS-EN-1149-5 - Protective clothing. Electrostatic properties
- BS-EN-12628 - Diving accessories. Combined buoyancy and rescue devices. Functional and safety requirements, test methods
- BS-EN-13034 - Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
- BS-EN-13158 - Protective clothing. Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers. Requirements and test methods
- BS-EN-13158-TC - Tracked Changes. Protective clothing. Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers. Requirements and test methods
- BS-EN-13277-1 - Protective equipment for martial arts
- BS-EN-13277-2 - Protective equipment for martial arts
- BS-EN-13277-3 - Protective equipment for martial arts
- BS-EN-13277-5 - Protective equipment for martial arts
- BS-EN-13277-6 - Protective equipment for martial arts
- BS-EN-13595-1 - Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits
- BS-EN-13595-2 - Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits
- BS-EN-13595-3 - Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits
- BS-EN-13595-4 - Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits
- BS-EN-13911 - Protective clothing for firefighters. Requirements and test methods for fire hoods for firefighters
- BS-EN-13911-TC - Tracked Changes. Protective clothing for firefighters. Requirements and test methods for fire hoods for firefighters
- BS-EN-14058-TC - Tracked Changes. Protective clothing. Garments for protection against cool environments
- BS-EN-14120 - Protective clothing. Wrist, palm, knee and elbow protectors for users of roller sports equipment. Requirements and test methods
- BS-EN-14126 - Protective clothing. Performance requirements and tests methods for protective clothing against infective agents
- BS-EN-14325-TC - Tracked Changes. Protective clothing against chemicals. Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
- BS-EN-14360 - Protective clothing against rain. Test method for ready made garments. Impact from above with high energy droplets
- BS-EN-14404 - Personal protective equipment. Knee protectors for work in the kneeling position
- BS-EN-14404-1 - Personal protective equipment. Knee protectors for work in the kneeling position
- BS-EN-14404-2 - Personal protective equipment. Knee protectors for work in the kneeling position
- BS-EN-14404-3 - Personal protective equipment. Knee protectors for work in the kneeling position
- BS-EN-14404-5 - Personal protective equipment. Knee protectors for work in the kneeling position
- BS-EN-14404-6 - Personal protective equipment. Knee protectors for work in the kneeling position
- BS-EN-14605 - Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
- BS-EN-14786 - Protective clothing. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions. Atomizer test
- BS-EN-1486 - Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting
- BS-EN-15614 - Protective clothing for firefighters. Laboratory test methods and performance requirements for wildland clothing
- BS-EN-1621-1 - Motorcyclists' protective clothing against mechanical impact
- BS-EN-1621-2 - Motorcyclists' protective clothing against mechanical impact
- BS-EN-1621-3 - Motorcyclists' protective clothing against mechanical impact
- BS-EN-1621-4 - Motorcyclists' protective clothing against mechanical impact
- BS-EN-16689 - Protective clothing for firefighters. Performance requirements for protective clothing for technical rescue
- BS-EN-17092-1 - Protective garments for motorcycle riders
- BS-EN-17092-2 - Protective garments for motorcycle riders
- BS-EN-17092-3 - Protective garments for motorcycle riders
- BS-EN-17092-4 - Protective garments for motorcycle riders
- BS-EN-17092-5 - Protective garments for motorcycle riders
- BS-EN-17092-6 - Protective garments for motorcycle riders
- BS-EN-17353 - Protective clothing. Enhanced visibility equipment for medium risk situations. Test methods and requirements
- BS-EN-17673 - Protective clothing. Protection against heat and flame. Requirements and test methods for garments with integrated smart textiles and non textile elements
- BS-EN-340 - Protective clothing. General requirements
- BS-EN-342 - Protective clothing. Ensembles and garments for protection against cold
- BS-EN-342-TC - Tracked Changes. Protective clothing. Ensembles and garments for protection against cold
- BS-EN-343 - Protective clothing. Protection against rain
- BS-EN-367 - Protective clothing. Protection against heat and fire. Method for determining heat transmission on exposure to flame
- BS-EN-381-10 - Protective clothing for users of hand-held chain saws
- BS-EN-381-11 - Protective clothing for users of hand-held chain saws
- BS-EN-381-8 - Protective clothing for users of hand-held chain saws
- BS-EN-381-9 - Protective clothing for users of hand-held chain saws
- BS-EN-396 - Lifejackets & Personal Buoyancy Aids. Lifejacket 150 Gives a Reasonable Assurance Of
- BS-EN-463 - Test Method: Determination of Resistance To Penetration by Ajet of Liquid (Jet Test), Pro
- BS-EN-464 - Protective clothing. Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles. Test method. Determination of leak-tightness of gas-tight suits (Internal Pressure Test)
- BS-EN-466-1 - Protective Clothing, Protection Against Liquid Chemicals, Performance Requirements For
- BS-EN-467 - Protective Clothing, Protection Against Liquid Chemicals, Performance Requirements For
- BS-EN-468 - Protective clothing for use against liquid chemicals. Test method. Determination of resistance to penetration by spray (Spray Test)
- BS-EN-469 - Protective clothing for firefighters. Performance requirements for protective clothing for firefighting activities
- BS-EN-470-1 - Protective clothing for use in welding and allied processes. General requirements
- BS-EN-471 - High-visibility warning clothing for professional use. Test methods and requirements
- BS-EN-4862 - Aerospace series. Rotorcraft constant wear lifejackets. Requirements, testing and marking
- BS-EN-4863 - Aerospace series. Rotorcraft immersion suits. Requirements, testing and marking
- BS-EN-50237 - Gloves and mitts with mechanical protection for electrical purposes
- BS-EN-50286 - Electrical insulating protective clothing for low-voltage installations
- BS-EN-530 - Abrasion resistance of protective clothing material. Test methods
- BS-EN-531 - Protective clothing for workers exposed to heat
- BS-EN-533 - Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies
- BS-EN-61331-3 - Protective devices against diagnostic medical X-radiation
- BS-EN-61482-1-2 - Live working. Protective clothing against the thermal hazards of an electric arc
- BS-EN-61482-1-2-TC - Tracked Changes. Live working. Protective clothing against the thermal hazards of an electric arc
- BS-EN-702 - Protective clothing. Protection against heat and flame. Test method. Determination of the contact heat transmission through protective clothing or its materials
- BS-EN-863 - Protective clothing. Mechanical properties. Test method: puncture resistance
- BS-EN-943-1 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols
- BS-EN-943-1-TC - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols
- BS-EN-943-2 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols
- BS-EN-IEC-60895 - Live working. Conductive clothing
- BS-EN-IEC-61482-1-1 - Live working. Protective clothing against the thermal hazards of an electric arc
- BS-EN-ISO-11393-1 - Protective clothing for users of hand-held chainsaws
- BS-EN-ISO-11393-2 - Protective clothing for users of hand-held chainsaws
- BS-EN-ISO-11393-5 - Protective clothing for users of hand-held chainsaws
- BS-EN-ISO-11393-6 - Protective clothing for users of hand-held chainsaws
- BS-EN-ISO-11610 - Protective clothing. Vocabulary
- BS-EN-ISO-11611 - Protective clothing for use in welding and allied processes
- BS-EN-ISO-11612 - Protective clothing. Clothing to protect against heat and flame. Minimum performance requirements
- BS-EN-ISO-11612-TC - Tracked Changes. Protective clothing. Clothing to protect against heat and flame. Minimum performance requirements
- BS-EN-ISO-12127-1 - Clothing to protect against heat and flame. Determination of contact heat transmission through clothing or constituent materials
- BS-EN-ISO-12127-2 - Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials
- BS-EN-ISO-12402-1 - Personal flotation devices
- BS-EN-ISO-12402-10 - Personal flotation devices
- BS-EN-ISO-13506-1 - Protective clothing against heat and flame
- BS-EN-ISO-13506-1-TC - Tracked Changes. Protective clothing against heat and flame
- BS-EN-ISO-13506-2 - Protective clothing against heat and flame.Skin burn injury prediction. Calculation requirements and test cases.
- BS-EN-ISO-13506-2-TC - Tracked Changes. Protective clothing against heat and flame
- BS-EN-ISO-13688 - Protective clothing. General requirements
- BS-EN-ISO-13982-1 - Protective clothing for use against solid particulates
- BS-EN-ISO-13982-2 - Protective clothing for use against solid particulates
- BS-EN-ISO-13995 - Protective clothing. Mechanical properties. Test method for the determination of the resistance to puncture and dynamic tearing of materials
- BS-EN-ISO-13997 - Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
- BS-EN-ISO-13997-TC - Tracked Changes. Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
- BS-EN-ISO-13998 - Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives
- BS-EN-ISO-14116 - Protective clothing. Protection against flame. Limited flame spread materials, material assemblies and clothing
- BS-EN-ISO-14460 - Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods
- BS-EN-ISO-14877 - Protective clothing for abrasive blasting operations using granular abrasives
- BS-EN-ISO-15025 - Protective clothing. Protection against flame. Method of test for limited flame spread
- BS-EN-ISO-15027-1 - Immersion suits
- BS-EN-ISO-15027-2 - Immersion suits
- BS-EN-ISO-15027-3 - Immersion suits
- BS-EN-ISO-17491-3 - Protective clothing. Test methods for clothing providing protection against chemicals
- BS-EN-ISO-17491-4 - Protective clothing. Test methods for clothing providing protection against chemicals
- BS-EN-ISO-17491-4-TC - Tracked Changes. Protective clothing. Test methods for clothing providing protection against chemicals
- BS-EN-ISO-18640-1 - Protective clothing for firefighters. Physiological impact
- BS-EN-ISO-18640-2 - Protective clothing for firefighters. Physiological impact
- BS-EN-ISO-19918 - Protective clothing. Protection against chemicals. Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017)
- BS-EN-ISO-20471 - High visibility clothing. Test methods and requirements
- BS-EN-ISO-22612 - Clothing for protection against infectious agents. Test method for resistance to dry microbial penetration
- BS-EN-ISO-24231 - Protective clothing. Protection against rain. Test method for ready-made garments against high-energy droplets from above
- BS-EN-ISO-24231-TC - Tracked Changes. Protective clothing. Protection against rain. Test method for ready-made garments against high-energy droplets from above
- BS-EN-ISO-27065 - Protective clothing. Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers
- BS-EN-ISO-6529 - Protective clothing. Protection against chemicals. Determination of resistance of protective clothing materials to permeation by liquids and gases
- BS-EN-ISO-6530 - Protective clothing. Protection agaist liquid chemicals. Test method for resistance of materials to penetration by liquids
- BS-EN-ISO-6942 - Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
- BS-EN-ISO-6942-TC - Tracked Changes. Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
- BS-EN-ISO-9151 - Protective clothing against heat and flame. Determination of heat transmission on exposure to flame
- BS-EN-ISO-9185 - Protective clothing. Assessment of resistance of materials to molten metal splash
- BS-ISO-11613 - Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting. Laboratory test methods and performance
- BS-ISO-11999-1 - PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- BS-ISO-11999-3 - PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- BS-ISO-11999-4 - PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- BS-ISO-11999-5 - PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- BS-ISO-11999-6 - PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- BS-ISO-11999-6-TC - Tracked Changes. PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- BS-ISO-11999-9 - PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- BS-ISO-13506 - Protective clothing against heat and flame. Test method for complete garments. Prediction of burn injury using an instrumented manikin
- BS-ISO-13506-2 - Protective clothing against heat and flame
- BS-ISO-15025 - Protective clothing. Protection against heat and flame. Method of test for limited flame spread
- BS-ISO-16073-1 - Wildland firefighting personal protective equipment. Requirements and test methods
- BS-ISO-16073-2 - Wildland firefighting personal protective equipment. Requirements and test methods
- BS-ISO-16073-3 - Wildland firefighting personal protective equipment. Requirements and test methods
- BS-ISO-16073-4 - Wildland firefighting personal protective equipment. Requirements and test methods
- BS-ISO-16073-6 - Wildland firefighting personal protective equipment. Requirements and test methods
- BS-ISO-16073-7 - Wildland firefighting personal protective equipment. Requirements and test methods
- BS-ISO-17491-1 - Protective clothing. Test methods for clothing providing protection against chemicals
- BS-ISO-17491-2 - Protective clothing. Test methods for clothing providing protection against chemicals
- BS-ISO-17491-5 - Protective clothing. Test methods for clothing providing protection against chemicals
- BS-ISO-17492 - Clothing for protection against heat and flame. Determination of heat transmission on exposure to both flame and radiant heat
- BS-ISO-17493 - Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
- BS-ISO-17493-TC - Tracked Changes. Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
- BS-ISO-17723-1 - PPE ensembles for firefighters undertaking hazardous materials response activities
- BS-ISO-19912 - Ships and marine technology. Servicing of immersion suits, anti-exposure suits and constant wear suits
- BS-ISO-21942 - Station uniform for firefighters
- BS-ISO-23616 - Cleaning, inspection and repair of firefighters' personal protective equipment (PPE)
- CWA-15756 - Humanitarian Mine Action (Hma, Personal Protective Equipment (Ppe), Test & Evaluation
- DD-7971-9 - Protective clothing and equipment for use in violent situations and in training
- DD-CEN-15256 - Protective clothing. Hand, arm, leg, genital and neck protectors for use in ice hockey. Protectors for players other than goalkeepers. Requirements and test methods
- DD-ENV-342 - 3
- DD-ENV-50354 - Electrical arc test methods for material and garments, for use by workers at risk from exposure to an electrical arc
- PAS-10412 - Intelligent clothing. LED active high visibility clothing. Specification
- PD-6636 - Personal protective equipment. Lifejackets and buoyancy aids. Guide for selection and use
- PD-CEN-14560 - Guidance for selection, use, care and maintenance of protective clothing against heat and flame
- PD-CEN-14560-TC - Tracked Changes. Guidance for selection, use, care and maintenance of protective clothing against heat and flame
- PD-CEN-15321 - Guidelines on the selection, use, care and maintenance of protective clothing
- PD-CEN-15419 - Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing
- PD-CEN-15419-TC - Tracked Changes. Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing
- PD-CEN-17330 - Guidelines for selection, use, care and maintenance of protective clothing against foul weather, wind and cold
- PD-CEN-17620 - Guidelines for selection, use, care and maintenance of smart garments protecting against heat and flame
- PD-ISO-11999-2 - PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures
- PD-ISO-19591 - Personal protective equipment for firefighters. Standard terms and definitions
- PD-ISO-21808 - Best practices on the selection and use of personal protective equipment (PPE) designed to provide protection for firefighters
- PD-ISO-21808-TC - Tracked Changes. Best practices on the selection and use of personal protective equipment (PPE) designed to provide protection for firefighters
- PD-ISO-2801 - Clothing for protection against heat and flame. General recommendations for selection, care and use of protective clothing
ISO:
- ISO-11393-1 - Protective clothing for users of hand-held chainsaws - Part 1: Test rig for testing resistance to cutting by a chainsaw
- ISO-11393-2 - Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements and test methods for leg protectors
- ISO-11393-5 - Protective clothing for users of hand-held chainsaws - Part 5: Performance requirements and test methods for protective gaiters
- ISO-11393-6 - Protective clothing for users of hand-held chainsaws - Part 6: Performance requirements and test methods for upper body protectors
- ISO-11610 - Protective clothing - Vocabulary
- ISO-11611 - Protective clothing for use in welding and allied processes
- ISO-11612 - Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements
- ISO-11613 - Protective clothing for firefighters who are engaged in support activities associated with structural fire fighting - Laboratory test methods and performance
- ISO-11999-1 - PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 1: General
- ISO-11999-2 - PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 2: Compatibility
- ISO-11999-3 - PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 3: Clothing
- ISO-11999-4 - PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 4: Gloves
- ISO-11999-5 - PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 5: Helmets
- ISO-11999-6 - PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 6: Footwear
- ISO-11999-9 - PPE for firefighters - Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 9: Fire hoods
- ISO-12127 - Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials
- ISO-12127-1 - Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder
- ISO-12127-2 - Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders
- ISO-13506 - Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin
- ISO-13506-1 - Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin
- ISO-13506-2 - Protective clothing against heat and flame - Part 2: Skin burn injury prediction - Calculation requirements and test cases
- ISO-13688 - Protective clothing - General requirements
- ISO-13688-AM1 - - Amendment 1
- ISO-13982-1 - Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
- ISO-13982-1-AM1 - Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1
- ISO-13982-2 - Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
- ISO-13994 - Clothing for protection against liquid chemicals - Determination of the resistance of protective clothing materials to penetration by liquids under pressure
- ISO-13995 - Protective clothing -- Mechanical properties -- Test method for the determination of the resistance to puncture and dynamic tearing of materials
- ISO-13996 - Protective clothing -- Mechanical properties -- Determination of resistance to puncture
- ISO-13997 - Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects
- ISO-13998 - Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives
- ISO-14116 - Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing
- ISO-14460 - Protective clothing for automobile racing drivers -- Protection against heat and flame -- Performance requirements and test methods
- ISO-14877 - Protective clothing for abrasive blasting operations using granular abrasives
- ISO-15025 - Protective clothing - Protection against flame - Method of test for limited flame spread
- ISO-15027-1 - Immersion suits - Part 1: Constant wear suits, requirements including safety
- ISO-15027-2 - Immersion suits - Part 2: Abandonment suits, requirements including safety
- ISO-15027-3 - Immersion suits - Part 3: Test methods
- ISO-15383 - Protective gloves for firefighters - Laboratory test methods and performance requirements
- ISO-15384 - Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing
- ISO-15384-AM1 - - Amendment 1: Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing - Amendment 1
- ISO-15538 - Protective clothing for firefighters - Laboratory test methods and performance requirements for protective clothing with a reflective outer surface
- ISO-16073 - Wildland firefighting personal protective equipment - Requirements and test methods
- ISO-16073-1 - Wildland firefighting personal protective equipment - Requirements and test methods - Part 1: General
- ISO-16073-2 - Wildland firefighting personal protective equipment - Requirements and test methods - Part 2: Compatibility
- ISO-16073-3 - Wildland firefighting personal protective equipment - Requirements and test methods - Part 3: Clothing
- ISO-16073-4 - Wildland firefighting personal protective equipment - Requirements and test methods - Part 4: Gloves
- ISO-16602 - Protective clothing for protection against chemicals - Classification, labelling and performance requirements
- ISO-16602-AM1 - Protective clothing for protection against chemicals - Classification, labelling and performance requirements - Amendment 1
- ISO-16603 - Clothing for protection against contact with blood and body fluids - Determination of the resistance of protective clothing materials to penetration by blood and body fluids - Test method using synthetic blood
- ISO-16604 - Clothing for protection against contact with blood and body fluids - Determination of resistance of protective clothing materials to penetration by blood-borne pathogens - Test method using Phi-X 174 bacteriophage
- ISO-17491 - Protective clothing - Protection against gaseous and liquid chemicals - Determination of resistance of protective clothing to penetration by liquids and gases
- ISO-17491-1 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 1: Determination of resistance to outward leakage of gases (internal pressure test)
- ISO-17491-2 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test)
- ISO-17491-3 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
- ISO-17491-4 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
- ISO-17491-4-AM1 - - Amendment 1
- ISO-17491-5 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test)
- ISO-17492 - Clothing for protection against heat and flame - Determination of heat transmission on exposure to both flame and radiant heat
- ISO-17493 - Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven
- ISO-17723-1 - PPE ensembles for firefighters undertaking hazardous materials response activities - Part 1: Gas-tight, vapour-protective ensembles for emergency response teams (type 1)
- ISO-18639-3 - PPE ensembles for firefighters undertaking specific rescue activities - Part 3: Clothing
- ISO-18640-1 - Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso
- ISO-18640-1-AM1 - - Amendment 1
- ISO-18640-2 - Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters
- ISO-18640-2-AM1 - - Amendment 1
- ISO-19591 - Personal protective equipment for firefighters - Standard terms and definitions
- ISO-19912 - Ships and marine technology - Servicing of immersion suits, anti-exposure suits and constant wear suits
- ISO-19918 - Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials
- ISO-19918-AM1 - - Amendment 1: Extraction and chemical analysis
- ISO-20471 - High visibility clothing - Test methods and requirements
- ISO-20471-AM1 - - Amendment 1
- ISO-21808 - Best practices on the selection and use of personal protective equipment (PPE) designed to provide protection for firefighters
- ISO-21942 - Station uniform for firefighters
- ISO-22488 - Ships and marine technology - Shipboard fire-fighters outfits (protective clothing, gloves, boots and helmet)
- ISO-22608 - Protective clothing - Protection against liquid chemicals - Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials
- ISO-22609 - Clothing for protection against infectious agents - Medical face masks - Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
- ISO-22610 - Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration
- ISO-22612 - Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration
- ISO-23616 - Cleaning, inspection and repair of firefighters personal protective equipment (PPE)
- ISO-24231 - Protective clothing - Protection against rain - Test method for ready-made garments against high-energy droplets from above
- ISO-27065 - Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers
- ISO-27065-AM1 - - Amendment 1: Surrogate test chemical
- ISO-2801 - Clothing for protection against heat and flame - General recommendations for selection, care and use of protective clothing
- ISO-6529 - Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases
- ISO-6530 - Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids
- ISO-6942 - Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
- ISO-8194 - Radiation protection - Clothing for protection against radioactive contamination - Design, selection, testing and use
- ISO-9150 - Protective clothing - Determination of behaviour of materials on impact of small splashes of molten metal
- ISO-9151 - Protective clothing against heat and flame - Determination of heat transmission on exposure to flame
- ISO-9185 - Protective clothing - Assessment of resistance of materials to molten metal splash
- ISO/DIS-17491-3 - Part 3: Determination of Resistance To Penetration by a Jet of Liquid (Jet Test), Pro
- ISO/DIS-17491-4 - Part 4: Determination of Resistance To Penetration by a Spray of Liquid (Spray Test),
Other SDOs:
- BS-ISO-17491-5-TC - Tracked Changes. Protective clothing. Test methods for clothing providing protection against chemicals
- DIN-EN-1149-1 - Part 1: Test Method for Measurement of Surface Resistivity, Protective Clothing - Ele
- DIN-EN-13034 - Protective Clothing Against Liquid Chemicals - Performance Requirements for Chemical P
- DIN-EN-13546 - Protective Clothing - Hand, Arm, Chest, Abdomen, Leg, Foot & Genital Protectors for Fi
- DIN-EN-13567 - Protective Clothing - Hand, Arm, Chest, Abdomen, Leg, Genital & Face Protectors for Fe
- DIN-EN-14120 - Protective Clothing - Wrist, Palm, Knee & Elbow Protectors for Users of Roller Sports
- DIN-EN-14325 - Protective Clothing Against Chemicals, Test Methods & Performance Classification of Ch
- DIN-EN-14328 - Protective Clothing, Gloves & Armguards Protecting Against Cuts by Powered Knives - Re
- DIN-EN-14360 - Protective Clothing Against Rain, Test Method for Ready-Made Garments - Impact From Ab
- DIN-EN-14404 - Personal Protective Equipment - Knee Protectors for Work in the Kneeling Position
- DIN-EN-14605 - Protective Clothing Against Liquid Chemicals - Performance Requirements for Clothing W
- DIN-EN-14786 - Protective Clothing - Determination of Resistance To Penetration by Sprayed Liquid Che
- DIN-EN-1621-2 - Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods; German version EN 1621-2:2014
- DIN-EN-340 - Protective clothing - General requirements; German version EN 340:2003
- DIN-EN-342 - Protective Clothing, Ensembles and Garments for Protection Against Cold
- DIN-EN-343 - Protective Clothing - Protection Against Rain
- DIN-EN-469 - Protective clothing for firefighters - Performance requirements for protective clothing for firefighting; German version EN 469:2014
- DIN-EN-471 - High-visibility warning clothing for professional use - Test methods and requirements; German version EN 471:2003+A1:2007
- DIN-EN-943-1 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
- DIN-EN-ISO-13982-1 - Part 1: Performance Requirements for Chemical Protective Clothing Providing Protection
- DIN-EN-ISO-13982-2 - Part 2: Test Method for Determination of Inward Leakage of Aerosols of Fine Particles
- DIN-EN-ISO-13998 - Protective Clothing, Aprons, Trousers & Vests Protecting Against Cuts & Stabs by Hand
- DIN-EN-ISO-15025 - Protective clothing - Protection against flame - Method of test for limited flame spread
- DIN-EN-ISO-15027-1 - Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
- DIN-EN-ISO-15027-2 - Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
- DIN-EN-ISO-15027-3 - Immersion suits - Part 3: Test methods (ISO 15027-3:2012)
- DIN-EN-ISO-22610 - Surgical Drapes, Gowns & Clean Air Suits, Used as Medical Devices, for Patients, Clini
- DIN-EN-ISO-22612 - Clothing for Protection Against Infectious Agents, Test Method for Resistance To Dry M
- DIN-EN-ISO-6529 - Protective Clothing - Protection Against Chemicals, Determination of Resistance of Pro
- DIN-EN-ISO-6530 - Protective Clothing - Protection Against Liquid Chemicals, Test Method for Resistance
- DS-ISO-27065 - Protective Clothing - Performance Requirements for Protective Clothing Worn by Operators Applying Liquid Pesticides
- EN-1073-1 - Protective clothing against solid airborne particles including radioactive contamination - Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract
- EN-1149-5 - Part 5: Material Performance & Design Requirements, Protective Clothing - Electrostati
- EN-13034 - Protective Clothing Against Liquid Chemicals - Performance Requirements for Chemical P
- EN-13158 - Protective Clothing - Protective Jackets, Body & Shoulder Protectors for Equestrian Us
- EN-13277-3 - Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors
- EN-14120 - Protective Clothing - Wrist, Palm, Knee & Elbow Protectors for Users of Roller Sports
- EN-14328 - Protective Clothing, Gloves & Armguards Protecting Against Cuts by Powered Knives - Re
- EN-14360 - Protective Clothing Against Rain, Test Method for Ready-Made Garments - Impact From Ab
- EN-14404 - Personal Protective Equipment - Knee Protectors for Work in the Kneeling Position
- EN-14465 - Textiles - Upholstery Fabrics - Specification & Methods of Test
- EN-14605 - Protective Clothing Against Liquid Chemicals - Performance Requirements for Clothing W
- EN-14786 - Protective Clothing - Determination of Resistance To Penetration by Sprayed Liquid Che
- EN-1486 - Protective Clothing for Fire-Fighters, Test Methods & Requirements for Reflective Clot
- EN-15614 - Protective Clothing for Firefighters, Laboratory Test Methods & Performance Requiremen
- EN-1621-1 - Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
- EN-1621-2 - Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods
- EN-1621-3 - Motorcyclists protective clothing against mechanical impact - Part 3: Motorcyclists' chest protectors - Requirements and test methods
- EN-1621-4 - Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods
- EN-16689 - Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue
- EN-342 - Protective clothing - Ensembles and garments for protection against cold
- EN-343 - Protective Clothing - Protection Against Rain
- EN-381-8 - Protective Clothing for Users of Hand-Held Chain Saws, Test Methods for Chain Saw Pro
- EN-381-9 - Protective Clothing for Users of Hand-Held Chain Saws, Requirements for Chain Saws Pro
- EN-397 - Industrial Safety Helmets
- EN-469 - Protective clothing for firefighters - Performance requirements for protective clothing for firefighting
- EN-471 - High-Visibility Warning Clothing for Professional Use - Test Methods & Requirements
- EN-943-1 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
- EN-ISO-11393-1 - Protective clothing for users of hand-held chainsaws - Part 1: Test rig for testing resistance to cutting by a chainsaw
- EN-ISO-11393-5 - Protective clothing for users of hand-held chainsaws - Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018)
- EN-ISO-11393-6 - Protective clothing for users of hand-held chainsaws - Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018)
- EN-ISO-11611 - Protective clothing for use in welding and allied processes
- EN-ISO-11612 - Protective Clothing - Clothing To Protect Against Heat & Flame
- EN-ISO-12127-1 - Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder
- EN-ISO-12127-2 - Clothing for Protection Against Heat & Flame, Determination of Contact Heat Transmiss
- EN-ISO-12402-1 - Part 1: Lifejackets for Seagoing Ships - Safety Requirements, Personal Flotation Devic
- EN-ISO-13506-1 - Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin
- EN-ISO-13688 - Protective clothing - General requirements (ISO 13688:2013)
- EN-ISO-13982-1 - Part 1: Performance Requirements for Chemical Protective Clothing Providing Protection
- EN-ISO-13982-2 - Part 2: Test Method for Determination of Inward Leakage of Aerosols of Fine Particles
- EN-ISO-13997 - Determination of Resistance To Cutting by Sharp Objects, Protective Clothing - Mechani
- EN-ISO-14021 - Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)
- EN-ISO-14116 - Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing
- EN-ISO-15027-1 - Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
- EN-ISO-15027-2 - Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
- EN-ISO-15027-3 - Immersion suits - Part 3: Test methods (ISO 15027-3:2012)
- EN-ISO-17491-3 - Part 3: Determination of Resistance To Penetration by a Jet of Liquid, Protective Clo
- EN-ISO-17491-4 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
- EN-ISO-18640-1 - Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso (ISO 18640-1:2018)
- EN-ISO-19918 - Protective clothing. Protection against chemicals. Measurement of cumulative permeation of chemicals with low vapour pressure through materials
- EN-ISO-20471 - High visibility clothing - Test methods and requirements - Amendment 1
- EN-ISO-22610 - Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Test method to determine the resistance to wet bacterial penetration
- EN-ISO-22612 - Clothing for Protection Against Infectious Agents, Test Method for Resistance To Dry M
- EN-ISO-6530 - Protective Clothing - Protection Against Liquid Chemicals, Test Method for Resistance
- EN-ISO-9151 - Protective clothing against heat and flame - Determination of heat transmission on exposure to flame
- EN-ISO-9185 - Protective Clothing - Assessment of Resistance of Materials To Molten Metal Splash
- JIS-T-8024 - Clothing for protection against heat and flame -- Determination of heat transmission on exposure to both flame and radiant heat
- JIS-T-8031 - Clothing for protection against liquid chemicals -- Determination of the resistance of protective clothing materials to penetration by liquids under pressure
- JIS-T-8061 - Clothing for protection against contact with blood and body fluids -- Determination of resistance of protective clothing materials to penetration by blood-borne pathogens -- Test method using Phi-X174 bacteriophage
- JIS-T-8062 - Clothing for protection against infectious agents -- Face masks -- Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
- JIS-T-8125-4 - Protective clothing for users of hand-held chain-saws -- Part 4: Test methods and performance requirements for protective gloves
- JIS-T-8125-5 - Protective clothing for users of hand-held chain-saws -- Part 5: Test methods and performance requirements for protective gaiters
- JIS-T-8125-6 - Protective clothing for users of hand-held chain-saws -- Part 6: Test methods and performance requirements for upper body protectors
- SIS-CEN-ISO/TR-11610 - Protective clothing - Vocabulary (ISO/TR 11610:2004),Protective clothing - Vocabulary (ISO/TR 11610:2004)
- SIS-CEN/TR-14560 - Guidance for selection, use, care and maintenance of protective clothing against heat and flame
- SIS-CEN/TR-15321 - Guidelines on the selection, use, care and maintenance of protective clothing
- SIS-CEN/TR-15419 - Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing
- SIS-CEN/TR-17330 - Guidelines for selection, use, care and maintenance of protective clothing against foul weather, wind and cold
- SIS-CEN/TR-17512 - Personal protective equipment - Smart garments - Terms and definitions
- SIS-CEN/TR-17620 - Guidelines for selection, use, care and maintenance of smart garments protecting against heat and flame
- SIS-ISO/TR-21808 - Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters (ISO/TR 21808:2021)
- SIS-ISO/TS-11665-12 - Measurement of radioactivity in the environment - Air : radon 222 - Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method
- SIS-ISO/TS-11665-13 - Measurement of radioactivity in the environment - Air: radon 222 - Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration measurement method
- SS-882510 - Personal reflectors - Requirements
- SS-882511 - Personal reflectors - Testing
- SS-EN-1073-1 - Protective clothing against solid airborne particles including radioactive contamination - Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract
- SS-EN-1073-2 - Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
- SS-EN-1082-1 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part1: Chain mail gloves and arm guards
- SS-EN-1082-2 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail
- SS-EN-1082-3 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials
- SS-EN-1149-1 - Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
- SS-EN-1149-2 - Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
- SS-EN-1149-3 - Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay
- SS-EN-1149-5 - Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
- SS-EN-1150 - Protective clothing - Visibility clothing for non-professional use - Test methods and requirements
- SS-EN-12568 - Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts
- SS-EN-13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective suits offering limited protective performance against liquid chemicals (Type 6 and type PB [6] equipment)
- SS-EN-13061 - Protective clothing - Shin guards for association football players - Requirements and test methods
- SS-EN-13158 - Protective clothing - Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers - Requirements and test methods
- SS-EN-13268 - Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts
- SS-EN-13277-1 - Protective equipment for martial arts - Part 1: General requirements and test methods
- SS-EN-13277-2 - Protective equipment for martial arts - Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
- SS-EN-13277-3 - Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors
- SS-EN-13277-3-AM1 - Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors
- SS-EN-13277-5 - Protective equipment for martial arts - Part 5: Additional requirements and test methods for genital protectors and abdominal protectors
- SS-EN-13277-6 - Protective equipment for martial arts- Part 6: Additional requirements and test methods for breast protectors for females
- SS-EN-13546 - Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods
- SS-EN-13567 - Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods
- SS-EN-13595-1 - Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 1: General requirements
- SS-EN-13595-2 - Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance
- SS-EN-13595-3 - Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength
- SS-EN-13595-4 - Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance
- SS-EN-1384 - Helmets for equestrian activities
- SS-EN-13911 - Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters
- SS-EN-14021 - Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods
- SS-EN-14058 - Protective clothing - Garments for protection against cool environments
- SS-EN-14120 - Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods
- SS-EN-14126 - Protective clothing - Performance requirements and test methods for protective clothing against infective agents
- SS-EN-14325 - Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
- SS-EN-14360 - Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets
- SS-EN-14404 - Personal protective equipment - Knee protectors for work in the kneeling position
- SS-EN-14605 - Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
- SS-EN-14786 - Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
- SS-EN-1486 - Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
- SS-EN-15614 - Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing
- SS-EN-1621-1 - Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
- SS-EN-1621-2 - Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods
- SS-EN-1621-3 - Motorcyclists' protective clothing against mechanical impact Part 3: Motorcyclists' chest protectors - Requirements and test methods
- SS-EN-1621-4 - Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods
- SS-EN-16689 - Protective clothing for firefighters - Performance requirements for protective clothing for technical rescue
- SS-EN-16778 - Protective gloves - The determination of Dimethylformamide in gloves
- SS-EN-16867 - Building hardware - Mechatronic door furniture - Requirements and test methods
- SS-EN-17084 - Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components
- SS-EN-17092-1 - Protective garments for motorcycle riders - Part 1: Test methods
- SS-EN-17092-2 - Protective garments for motorcycle riders - Part 2: Class AAA garments - Requirements
- SS-EN-17092-3 - Protective garments for motorcycle riders - Part 3: Class AA garments - Requirements
- SS-EN-17092-4 - Protective garments for motorcycle riders - Part 4: Class A garments - Requirements
- SS-EN-17092-5 - Protective garments for motorcycle riders - Part 5: Class B garments - Requirements
- SS-EN-17092-6 - Protective garments for motorcycle riders - Part 6: Class C garments - Requirements
- SS-EN-17353 - Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements
- SS-EN-174 - Personal eye-protection - Ski goggles for downhill skiing
- SS-EN-17673 - Protective clothing - Protection against heat and flame - Requirements and test methods for garments with integrated smart textiles and non textile elements
- SS-EN-17679 - Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision
- SS-EN-1994-1-1 - Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
- SS-EN-24641 - Rubber hoses for water suction and discharge - Specification (ISO 4641:1991)
- SS-EN-24869-1 - Acoustics - Hearing protectors - Part 1: Subjective method for the measurement of sound attenuation
- SS-EN-24869-3 - Acoustics - Hearing protectors - Part 3: Simplified method for the measurement of insertion loss ofear-muff type protectors for quality inspection purposes
- SS-EN-340 - Protective clothing - General requirements
- SS-EN-342 - Protective clothing - Ensembles and garments for protection against cold
- SS-EN-343 - Protective clothing - Protection against rain
- SS-EN-344 - Requirements and test methods for safety, protective and occupational footwear for professional use
- SS-EN-344-2 - Safety, protective and occupational footwear for professional use - Part 2: Additional requirementsand test methods
- SS-EN-345 - Specification for safety footwear for professional use
- SS-EN-345-2 - Safety footwear for professional use - Part 2: Additional specifications
- SS-EN-345-AM1 - Specification for safety footwear for professional use
- SS-EN-346 - Specification for protective footwear for professional use
- SS-EN-346-2 - Protective footwear for professional use - Part 2: Additional specifications
- SS-EN-346-AM1 - Specification for protective footwear for professional use
- SS-EN-347 - Specification for occupational footwear for professional use
- SS-EN-347-2 - Occupational footwear for professional use - Part2: Additional specifications
- SS-EN-347-AM1 - Specification for occupational footwear for professional use
- SS-EN-348 - Protective clothing - Test method - Determinationof behaviour of materials on impact of small splashes of molten metal
- SS-EN-352-3 - Hearing protectors - General requirements - Part 3: Earmuffs attached to head protection and/or face protection devices
- SS-EN-364 - Personal protective equipment against falls from a height - Test methods
- SS-EN-366 - Protective clothing - Protection against heat andfire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
- SS-EN-367 - Protective clothing - Protection against heat andflames - Test method: Determination of the heat transmission on exposure to flame
- SS-EN-368 - Protective clothing - Protection against liquid chemicals - Test method: Resistance of materials topenetration by liquids
- SS-EN-369 - Protective clothing - Protection against liquid chemicals - Test method: Resistance of materials topermeation by liquids
- SS-EN-373 - Protective clothing - Assessment of resistance ofmaterials to molten metal splash
- SS-EN-374-1 - Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
- SS-EN-374-2 - Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration
- SS-EN-374-3 - Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals
- SS-EN-381-1 - Protective clothing for users of hand held chainsaws - Part 1: Test rig for testing resistance to cutting by a chainsaw
- SS-EN-381-10 - Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors
- SS-EN-381-11 - Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors
- SS-EN-381-2 - Protective clothing for users of hand-held chain saws - Part 2: Test methods for leg protectors
- SS-EN-381-3 - Protective clothing for users of hand-held chain-saws - Part 3: Test methods for footwear
- SS-EN-381-4 - Protective clothing for users of hand-held chainsaws - Part 4: Test methods for chainsaw protective gloves
- SS-EN-381-5 - Protective clothing for users of hand-held chain saws - Part 5: Requirements for leg protectors
- SS-EN-381-7 - Protective clothing for users of hand-held chainsaws - Part 7: Requirements for chainsaw protective gloves
- SS-EN-381-8 - Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters
- SS-EN-381-9 - Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters
- SS-EN-388 - Protective gloves against mechanical risks
- SS-EN-393 - Lifejackets and personal buoyancy aids - Buoyancyaids - 50 N
- SS-EN-394 - Lifejackets and personal buoyancy aids - Additional items
- SS-EN-395 - Lifejackets and personal buoyancy aids - Lifejackets - 100 N
- SS-EN-396 - Lifejackets and personal buoyancy aids - Lifejackets - 150 N
- SS-EN-399 - Lifejackets and personal buoyancy aids - Lifejackets - 275 N
- SS-EN-407 - Protective gloves against thermal risks (heat and/or fire)
- SS-EN-412 - Protective aprons for use with hand knives
- SS-EN-420 - Protective gloves - General requirements and test methods
- SS-EN-421 - Protective gloves against ionizing radiation and radioactive contamination
- SS-EN-455-1 - Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
- SS-EN-455-1-AM1 - Medical gloves for singel use - Part 1: Requirements and testing for freedom from holes
- SS-EN-455-2 - Medical gloves for single use - Part 2: Requirements and testing for physical properties
- SS-EN-455-2-AM1 - Medical gloves for singel use - Part 2: Requirements and testing for physical properties
- SS-EN-463 - Protective clothing - Protection against liquid chemicals - Test method: Determination of resistance to penetration by a jet of liquid (jet test)
- SS-EN-464 - Protective clothing - Protection against liquid and gaseous chemicals, including liquid aerosols and solid particles - Test method: Determination of leak tightness of gas-tight suits (internal pressure test)
- SS-EN-465 - Protective clothing - Protection against liquid chemicals - Performance - Performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing (Type 4 Equipment)
- SS-EN-465-AM1 - Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing (Type 4 Equipment)
- SS-EN-466 - Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with liquid-tight connections between different parts of the clothing (Type 3 Equipment)
- SS-EN-466-AM1 - Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with liquid-tight connections between different parts of the clothing (Type 3 Equipment)
- SS-EN-467 - Protective clothing - Protection against liquid chemicals - Performance requirements for garments providing protection to parts of the body
- SS-EN-467-AM1 - Protective clothing - Protection against liquid chemicals - Performance requirements for garments providing protection to parts of the body
- SS-EN-468 - Protective clothing - Protection against liquid chemicals - Test method: Determination of resistance to penetration by spray (Spray-test)
- SS-EN-469 - Protective clothing for firefighters - Performance requirements for protective clothing for firefighting activities
- SS-EN-469-AM1 - Protective clothing for firefighters - Performance requirements for protective clothing for firefighting
- SS-EN-470-1 - Protective clothing for use in welding and alliedprocesses - Part 1: General requirements
- SS-EN-470-1-AM1 - Protective clothing for use in welding and alliedprocesses - Part 1: General requriements
- SS-EN-471 - High-visibility warning clothing for professional use - Test methods and requirements
- SS-EN-510 - Specification for protective clothing for use where there is a risk of entanglement with moving parts
- SS-EN-511 - Protective gloves against cold
- SS-EN-530 - Abrasion resistance of protective clothing material - Test methods
- SS-EN-531 - Protective clothing for industrial workers exposed to heat (excluding firefighters' and welders' clothing)
- SS-EN-531-AM1 - Protective clothing for workers exposed to heat
- SS-EN-532 - Protective clothing - Protection against heat andflame - Test method for limited flame spread
- SS-EN-533 - Protective clothing - Protection against heat andflame - Limited flame spread materials and material asssemblies
- SS-EN-659 - Protective gloves for firefighters
- SS-EN-702 - Protective clothing - Protection against heat andflame - Test method: Determination of the contactheat transmission through protective clothing or its materials
- SS-EN-863 - Protective clothing - Mechanical properties - Test method: Puncture Resistance
- SS-EN-943-1 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
- SS-EN-943-2 - Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET)
- SS-EN-966 - Helmets for airborne sports
- SS-EN-966-AM1 - Helmets for airborne sports
- SS-EN-967 - Head protectors for ice hockey players
- SS-EN-ISO-11393-1 - Protective clothing for users of hand-held chainsaws - Part 1: Test rig for testing resistance to cutting by a chainsaw (ISO 11393-1:2018)
- SS-EN-ISO-11393-2 - Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)
- SS-EN-ISO-11393-3 - Protective clothing for users of hand-held chainsaws - Part 3: Test methods for footwear (ISO 11393-3:2018)
- SS-EN-ISO-11393-4 - Protective clothing for users of hand-held chainsaws - Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
- SS-EN-ISO-11393-5 - Protective clothing for users of hand-held chainsaws - Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018)
- SS-EN-ISO-11393-6 - Protective clothing for users of hand-held chainsaws - Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018)
- SS-EN-ISO-11611 - Protective clothing for use in welding and allied processes (ISO 11611:2015)
- SS-EN-ISO-11612 - Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015)
- SS-EN-ISO-12127-1 - Clothing to protect against heat and flame - Determination of contact heat transmission through clothing or constituent materials - Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015)
- SS-EN-ISO-12127-2 - Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007)
- SS-EN-ISO-12402-1 - Personal flotation devices - Part 1: Lifejackets for seagoing ships - Safety requirements (ISO 12402-1:2005)
- SS-EN-ISO-13506-1 - Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017)
- SS-EN-ISO-13688 - Protective clothing - General requirements (ISO 13688:2013)
- SS-EN-ISO-13688-AM1 - Protective clothing - General requirements - Amendment 1 (ISO 13688:2013/Amd 1:2021)
- SS-EN-ISO-13704 - Petroleum, petrochemical and natural gas industries - Calculation of heater-tube thickness in petroleum refineries (ISO 13704:2022)
- SS-EN-ISO-13982-1 - Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
- SS-EN-ISO-13982-1-AM1 - Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd 1:2010)
- SS-EN-ISO-13982-2 - Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
- SS-EN-ISO-13995 - Protective clothing - Mechanical properties - Test methods for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000)
- SS-EN-ISO-13997 - Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:2023)
- SS-EN-ISO-13998 - Protective clothing - Aprons, trousers and vests protecting against cuts and stubs by hand knives (ISO 13998:2003)
- SS-EN-ISO-14116 - Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2015)
- SS-EN-ISO-14460 - Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods (ISO 14460:1999)
- SS-EN-ISO-14460-AM1 - Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods - Amendment 1: Modified flexion test (ISO 14460:1999/Amd 1:2002)
- SS-EN-ISO-14877 - Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)
- SS-EN-ISO-15025 - Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016)
- SS-EN-ISO-15027-1 - Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
- SS-EN-ISO-15027-2 - Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
- SS-EN-ISO-15027-3 - Immersion suits - Part 3: Test methods (ISO 15027-3:2012)
- SS-EN-ISO-15384-AM1 - Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing - Amendment 1 (ISO 15384:2018/Amd 1:2021)
- SS-EN-ISO-17491-3 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)
- SS-EN-ISO-17491-4 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008)
- SS-EN-ISO-17491-4-AM1 - Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/Amd 1:2016)
- SS-EN-ISO-18640-1 - Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso (ISO 18640-1:2018)
- SS-EN-ISO-18640-1-AM1 - Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso - Amendment 1 (ISO 18640-1:2018/Amd 1:2019)
- SS-EN-ISO-18640-2 - Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO 18640-2:2018)
- SS-EN-ISO-18640-2-AM1 - Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters - Amendment 1 (ISO 18640-2:2018/Amd 1:2019)
- SS-EN-ISO-19918 - Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials - Amendment 1: Extraction and chemical analysis (ISO 19918:2017/Amd 1:2021)
- SS-EN-ISO-20471 - High visibility clothing - Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)
- SS-EN-ISO-20471-AM1 - High visibility clothing - Test methods and requirements - Amendment 1 (ISO 20471:2013/Amd 1:2016)
- SS-EN-ISO-22610 - Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006)
- SS-EN-ISO-27065 - Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)
- SS-EN-ISO-27065-AM1 - Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers - Amendment 1: Surrogate test chemical (ISO 27065:2017/Amd 1:2019)
- SS-EN-ISO-374-1 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
- SS-EN-ISO-374-1-AM1 - Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018)
- SS-EN-ISO-374-5 - Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
- SS-EN-ISO-4869-1 - Acoustics - Hearing protectors - Part 1: Subjective method for the measurement of sound attenuation (ISO 4869-1:2018)
- SS-EN-ISO-5983-1 - Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method (EN ISO 5983-1:2005)
- SS-EN-ISO-6529 - Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001)
- SS-EN-ISO-6530 - Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005)
- SS-EN-ISO-6942 - Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2022)
- SS-EN-ISO-9151 - Protective clothing against heat and flame - Determination of heat transmission on exposure to flame (ISO 9151:2016)
- SS-EN-ISO-9185 - Protective clothing - Assessment of resistance of materials to molten metal splash (ISO 9185:2007)
- SS-EN-ISO/IEC-15426-2 - Information Technology - Automatic identification and data capture Techniques - Bar code verifier conformance specification - Part 2: Two-dimensional symbols (ISO/IEC 15426-2:2005)
- SS-ENV-342 - Protective clothing - Ensembles for protection against cold
- SS-ENV-343 - Protective clothing - Protection against foul weather
- SS-ISO-11665-9 - Measurement of radioactivity in the environment - Air: Radon-222 - Part 9: Test methods for exhalation rate of building materials (ISO 11665-9:2016, IDT)
- SS-ISO-6020-2 - Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series (ISO 6020-2:2015, IDT)
- SS-ISO-9541-1 - Information technology - Font information interchange - Part 1: Architecture. Technical Corrigendum2
- SS-ISO-9541-2 - Information technology - Font information interchange - Part 2: Interchange format
- UNE-EN-14058 - Ropa De Proteccion. Prendas Para Proteccion Contra Ambientesfrios (Spanish Language)
- UNE-EN-340 - Ropas De Proteccion. Requisitos Generales (Spanish Languageonly)
- UNE-EN-342 - Ropas De Proteccion. Conjuntos Y Prendas De Proteccion Contra El Frio (Spanish Languag