Document Center List of Standards on Other Protective Equipment
ICS Code 13.340.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1695 - Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
- ASTM-E3110 - Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
- ASTM-F1765 - Standard Guide for Ice Staff Self-Rescue Technique
- ASTM-F1766 - Standard Guide for Ice Awls Self-Rescue Technique
- ASTM-F1768 - Standard Guide for Using Whistle Signals During Rope Rescue Operations
- ASTM-F2116 - Standard Specification for Low Stretch and Static Kernmantle Life Safety Rope (Withdrawn 2024)
- ASTM-F2676 - Standard Test Method for Determining the Protective Performance of an Arc Protective Blanket for Electric Arc Hazards
- ASTM-F3272 - Standard Guide for Selection, Care, and Use of Arc Protective Blankets
- ASTM-PS112 - Provisional Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows (Withdrawn 2000)
- ASTM-PS117 - Provisional Standard Specification for Portable Escape Ladder for Residential Use (Withdrawn 2003)
- ASTM-PS120 - Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms (Withdrawn 2001)
BSI:
- BS-13700 - Permanent counterweighted guardrail systems. Specification
- BS-7883 - Personal fall protection equipment. Anchor systems. System design, installation and inspection. Code of practice
- BS-8405 - Personal protective equipment against falls from a height. Descender devices. Single-hand operated descender devices for self or assisted rescue
- BS-8437 - Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace
- BS-EN-12841 - Personal fall protection equipment. Rope access systems. Rope adjustment devices
- BS-EN-12841-TC - Tracked Changes. Personal fall protection equipment. Rope access systems. Rope adjustment devices
- BS-EN-13374 - Temporary edge protection systems. Product specification. Test methods
- BS-EN-1598 - Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes
- BS-EN-16716 - Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods
- BS-EN-341 - Personal fall protection equipment. Descender devices for rescue
- BS-EN-353-1 - Personal fall protection equipment. Guided type fall arresters including an anchor line
- BS-EN-353-2 - Personal protective equipment against falls from a height
- BS-EN-355 - Personal protective equipment against falls from a height. Energy absorbers
- BS-EN-358 - Personal protective equipment for work positioning and prevention of falls from a height. Belts and lanyards for work positioning or restraint
- BS-EN-360 - Personal fall protection equipment. Retractable type fall arresters
- BS-EN-361 - Personal protective equipment against falls from a height. Full body harnesses
- BS-EN-362 - Personal protective equipment against falls from a height. Connectors
- BS-EN-365 - Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
- BS-EN-ISO-11810 - Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition
- BS-EN-ISO-11810-1 - Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers
- BS-EN-ISO-11810-2 - Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers
- BS-EN-ISO-25980 - Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes
- BS-EN-ISO-25980-TC - Tracked Changes. Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes
- BS-ISO-22846-1 - Personal equipment for protection against falls. Rope access systems
ISO:
- ISO-10333-1 - Personal fall-arrest systems -- Part 1: Full-body harnesses
- ISO-10333-1-1 - Personal fall-arrest systems - Part 1: Full-body harnesses - Amendment 1
- ISO-10333-2 - Personal fall-arrest systems - Part 2: Lanyards and energy absorbers
- ISO-10333-3 - Personal fall-arrest systems -- Part 3: Self-retracting lifelines
- ISO-10333-4 - Personal fall-arrest systems - Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester
- ISO-10333-5 - Personal fall-arrest systems - Part 5: Connectors with self-closing and self-locking gates
- ISO-10333-6 - Personal fall-arrest systems - Part 6: System performance tests
- ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
- ISO-11810-2 - Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition
- ISO-13999-1 - Protective clothing -- Gloves and arm guards protecting against cuts and stabs by hand knives -- Part 1: Chain-mail gloves and arm guards
- ISO-13999-2 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail
- ISO-13999-3 - Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials
- ISO-14567 - Personal protective equipment for protection against falls from a height -- Single-point anchor devices
- ISO-21924-3 - Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors
- ISO-21924-5 - Protective equipment for martial arts - Part 5: Additional requirements and test methods for genital protectors and abdominal protectors
- ISO-21924-6 - Protective equipment for martial arts - Part 6: Additional requirements and test methods for breast protectors for females
- ISO-22846-1 - Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work
Other SDOs:
- DIN-EN-1263-1 - Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods; German version EN 1263-1:2014
- DIN-EN-1263-2 - Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits; German version EN 1263-2:2014
- DIN-EN-13374 - Temporary edge protection systems - Product specification - Test methods; German version EN 13374:2013
- DIN-EN-1598 - Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes; German version EN 1598:2011
- DIN-EN-353-1 - Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line; German version EN 353-1:2014
- DIN-EN-354 - Personal Fall Protection Equipment - Lanyards
- DIN-EN-362 - Personal Protective Equipment Against Falls From a Height, Connectors
- DIN-EN-363 - Personal Fall Protection Equipment - Personal Fall Protection Systems
- DIN-EN-365 - Personal Protective Equipment Against Falls From a Height, General Requirements for In
- DIN-EN-ISO-11810-1 - Part 1: Primary Ignition & Penetration, Lasers & Laser-Related Equipment - Test Method
- EN-1263-1 - Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
- EN-12841 - Personal Fall Protection Equipment - Rope Access Systems - Rope Adjustment Devices
- EN-13374 - Temporary edge protection systems - Product specification - Test methods
- EN-1598 - Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes
- EN-16716 - Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods
- EN-341 - Personal fall protection equipment - Descender devices for rescue
- EN-353-1 - Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
- EN-361 - Personal Protective Equipment Against Falls From a Height, Full-Body Harness
- EN-362 - Personal Protective Equipment Against Falls From a Height, Connectors
- EN-365 - Personal Protective Equipment Against Falls From a Height, General Requirements for In
- EN-ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition
- EN-ISO-11810-1 - Part 1: Primary Ignition & Penetration, Lasers & Laser-Related Equipment - Test Method
- EN-ISO-11810-2 - Part 2: Secondary Ignition, Lasers & Laser-Related Equipment - Test Method & Classific
- SS-EN-1018 - Chemicals used for treatment of water intended for human consumption - Calcium carbonate
- SS-EN-1095 - Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods
- SS-EN-1263-1 - Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods
- SS-EN-13374 - Temporary edge protection systems - Product specification - Test methods
- SS-EN-1598 - Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes
- SS-EN-1598-AM1 - Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes
- SS-EN-16716 - Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods
- SS-EN-1868 - Personal protective equipment against falls from a height - List of equivalent terms
- SS-EN-1891 - Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes
- SS-EN-341 - Personal fall protection equipment - Descender devices for rescue
- SS-EN-353-1 - Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
- SS-EN-353-2 - Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line
- SS-EN-354 - Personal fall protection equipment - Lanyards
- SS-EN-355 - Personal protective equipment against falls from a height - Energy absorbers
- SS-EN-358 - Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint
- SS-EN-360 - Personal protective equipment against falls from a height - Retractable type fall arresters
- SS-EN-361 - Personal protective equipment against falls from a height - Full body harnesses
- SS-EN-362 - Personal protective equipment against falls from a height - Connectors
- SS-EN-363 - Personal fall protection equipment - Personal fall protection systems
- SS-EN-364 - Personal protective equipment against falls from a height - Test methods
- SS-EN-365 - Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
- SS-EN-795 - Personal fall protection equipment - Anchor devices
- SS-EN-795-AM1 - Protection against falls from a height - Anchor devices - Requirements and testing
- SS-EN-ISO-10862 - Small craft - Quick release system for trapeze harness (ISO 10862:2009)
- SS-EN-ISO-11810 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015)
- SS-EN-ISO-11810-1 - Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient-protective covers - Part 1: Primary ignition and penetration (ISO 11810-1:2005)
- SS-EN-ISO-11810-2 - Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007)
- SS-EN-ISO-12401 - Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
- SS-EN-ISO-25980 - Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2014)
- SS-ISO-22846-1 - Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental principles for a system of work (ISO 22846-1:2003, IDT)