Document Center List of Standards on Geometrical Product Specification (Gps)
ICS Code 17.040.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-EN-ISO-10360-10-TC - Tracked Changes. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)
- BS-EN-ISO-10360-13 - Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS)
- BS-EN-ISO-1101 - Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
- BS-EN-ISO-12179-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile method. Calibration of contact (stylus) instruments
- BS-EN-ISO-14405-1-TC - Tracked Changes. Geometrical product specifications (GPS). Dimensional tolerancing
- BS-EN-ISO-14405-3 - Geometrical product specifications (GPS). Dimensional tolerancing
- BS-EN-ISO-14978-TC - Tracked Changes. Geometrical product specifications (GPS). General concepts and requirements for GPS measuring equipment
- BS-EN-ISO-16610-28 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-16610-31 - Geometrical product specifications (GPS). Filtration
- BS-EN-ISO-1938-2 - Geometrical product specifications (GPS). Dimensional measuring equipment
- BS-EN-ISO-1-TC - Tracked Changes. Geometrical product specifications (GPS). Standard reference temperature for the specification of geometrical and dimensional properties
- BS-EN-ISO-20170 - Geometrical product specifications (GPS). Decomposition of geometrical characteristics for manufacturing control
- BS-EN-ISO-21920-1 - Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-21920-1-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-21920-2 - Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-21920-3 - Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-21920-3-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Profile
- BS-EN-ISO-22081 - Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
- BS-EN-ISO-25178-2-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-700 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-71 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-71-TC - Tracked Changes. Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-72 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-25178-73 - Geometrical product specifications (GPS). Surface texture: Areal
- BS-EN-ISO-2692 EXPERT COMM - Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- BS-EN-ISO-2692-TC - Tracked Changes. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
- BS-EN-ISO-3040-TC - Tracked Changes. Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
- BS-EN-ISO-9013 - Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
- BS-IEC-61108-6 - Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS)
- BS-ISO-13019 - Tissue-engineered medical products. Quantification of sulfated glycosaminoglycans (sGAG) for evaluation of chondrogenesis
- BS-ISO-3245-TC - Tracked Changes. Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-464-TC - Tracked Changes. Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
- DD-ISO-16610-28 - Geometrical product specifications (GPS). Filtration
- DD-ISO-16610-31 - Geometrical product specifications (GPS). Filtration
- PD-ISO-21619 - Geometrical product specifications (GPS). Types of documents with GPS
- PD-ISO-23276 - Geometrical product specifications (GPS). Surface texture: Profile method. Flowchart for PSm, RSm, WSm and Pc, Rc, Wc
ISO:
- ISO-10360-13 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS
- ISO-14253-1 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications
- ISO-14253-2 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
- ISO-14253-3 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- ISO-14253-5 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments
- ISO-14253-6 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
- ISO-14406 - Geometrical product specifications (GPS) - Extraction
- ISO-14638 - Geometrical product specifications (GPS) - Matrix model
- ISO-16610-62 - Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: spline filters
- ISO-17450-1 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification
- ISO-17450-2 - Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
- ISO-17450-3 - Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features
- ISO-17450-4 - Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations
- ISO-17863 - Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies
- ISO-18391 - Geometrical product specifications (GPS) - Population specification
- ISO-20170 - Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control
- ISO-21619 - Geometrical product specifications (GPS) - Types of documents with GPS
- ISO-21920-1 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture
- ISO-21920-2 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters
- ISO-21920-3 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators
- ISO-22081 - Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
- ISO-22432 - Geometrical product specifications (GPS) - Features utilized in specification and verification
- ISO-23276 - Geometrical product specifications (GPS) - Surface texture: Profile method - Flowchart for PSm, RSm, WSm and Pc, Rc, Wc
- ISO-25178-700 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments
- ISO-25178-73 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
- ISO-25378 - Geometrical product specifications (GPS) - Characteristics and conditions - Definitions
Other SDOs:
- EN-ISO-1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
- EN-ISO-14405-3 - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
- EN-ISO-1660 - Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
- EN-ISO-16610-28 - Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects
- EN-ISO-17450-4 - Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations
- EN-ISO-18391 - Geometrical product specifications (GPS) - Population specification
- EN-ISO-1938-2 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges
- EN-ISO-20170 - Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
- EN-ISO-25178-73 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
- SIS-ISO/TR-23276 - Geometrical product specifications (GPS) - Surface texture: Profile method - Flowchart for PSm, RSm, WSm and Pc, Rc, Wc (ISO/TR 23276:2020)
- SIS-ISO/TR-23605 - Technical product specification (TPS) - Application guidance - International model for national implementation
- SIS-ISO/TS-21619 - Geometrical Product Specifications (GPS) Types of documents with GPS specifications (ISO/TS 21619:2018)
- SS-EN-ISO-10360-13 - Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 13: Optical 3D CMS (ISO 10360-13:2021)
- SS-EN-ISO-1101 - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
- SS-EN-ISO-12855 - Electronic fee collection - Information exchange between service provision and toll charging (ISO 12855:2022)
- SS-EN-ISO-14253-1 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
- SS-EN-ISO-14253-2 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
- SS-EN-ISO-14253-3 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
- SS-EN-ISO-14253-5 - Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
- SS-EN-ISO-14405-2 - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
- SS-EN-ISO-14405-3 - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
- SS-EN-ISO-14406 - Geometrical product specifications (GPS) - Extraction (ISO 14406:2010)
- SS-EN-ISO-14638 - Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
- SS-EN-ISO-14660-2 - Geometrical Procduct Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feautre (ISO 14660-2:1999)
- SS-EN-ISO-1660 - Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
- SS-EN-ISO-16610-28 - Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
- SS-EN-ISO-16610-61-AM1 - Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters - Amendment 1 (ISO 16610-61:2015/Amd 1:2019)
- SS-EN-ISO-17450-1 - Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
- SS-EN-ISO-17450-2 - Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
- SS-EN-ISO-17450-3 - Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
- SS-EN-ISO-17450-4 - Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
- SS-EN-ISO-18391 - Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
- SS-EN-ISO-1938-2 - Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
- SS-EN-ISO-20170 - Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
- SS-EN-ISO-21920-1 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 1: Indication of surface texture (ISO 21920-1:2021)
- SS-EN-ISO-21920-2 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 2: Terms, definitions and surface texture parameters (ISO 21920-2:2021)
- SS-EN-ISO-21920-3 - Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators (ISO 21920-3:2021)
- SS-EN-ISO-22432 - Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
- SS-EN-ISO-25178-700 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022)
- SS-EN-ISO-25178-71 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
- SS-EN-ISO-25178-73 - Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
- SS-EN-ISO-25378 - Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
- UNE-EN-ISO-17450-3 - Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features