## Document Center List of Standards on Electricity. Magnetism. General Aspects Including Electromagnetism

## ICS Code 17.220.01

Return to ICS Index.Up to Level 2:

**The following documents are a part of this series:**### ASTM:

- ASTM-D4470 - Standard Test Method for Static Electrification
- ASTM-D5568 - Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
- ASTM-D7278 - Standard Guide for Prediction of Analyzer Sample System Lag Times

### BSI:

- BS-7638 - Application guide for calculation of short-circuit currents in low-voltage radial systems
- BS-EN-50147-2 - Part 2: Alternative Test Site Suitability With Respect To Site Attenuation, Anechoic Chamb
- BS-EN-50445 - Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
- BS-EN-60059 - IEC standard current ratings
- BS-EN-60375 - Conventions concerning electric and magnetic circuits
- BS-EN-60404-11 - Magnetic materials. Method of test for the determination of surface insulation resistance of magnetic sheet and strip
- BS-EN-60404-15 - Magnetic materials. Methods for the determination of the relative magnetic permeability of feebly magnetic materials
- BS-EN-60865-1 - Short-circuit currents. Calculation of effects. Definitions and calculation methods
- BS-EN-60909-0 - Short-circuit currents in three-phase a.c. systems. Calculation of currents
- BS-EN-60909-3 - Short-circuit currents in three-phase a.c systems. Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
- BS-EN-60990 - Methods of measurement of touch current and protective conductor current
- BS-EN-61788-1 - Superconductivity. Critical current measurement. D.C. critical current of Nb-Ti composite superconductors
- BS-EN-61788-2 - Superconductivity. Critical current measurement. D.C. critical current of Nb$d3Sn composite superconductors
- BS-EN-61788-9 - Superconductivity. Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors
- BS-EN-62056-1-0 - Electricity metering data exchange. The DLMS/COSEM suite. Smart metering standardization framework
- BS-EN-62056-4-7 - Electricity metering data exchange. The DLMS/COSEM suite. DLMS/COSEM transport layer for IP networks
- BS-EN-62056-5-3 - Electrcity metering data exchange. The DLMS/COSEM suite. DLMS/COSEM application layer
- BS-EN-62056-6-1 - Electricity metering data exchange. The DLMS/COSEM suite. Object Identification System (OBIS)
- BS-EN-62056-6-2 - Electricity metering data exchange. The DLMS/COSEM suite. COSEM interface classes
- BS-EN-62056-7-6 - Electricity metering data exchange. The DLMS/COSEM suite. The 3-layer, connection-oriented HDLC based communication profile
- BS-EN-62056-8-3 - Electricity metering data exchange. The DLMS/COSEM suite. Communication profile for PLC S-FSK neighbourhood networks
- BS-EN-62056-8-6 - Electricity metering data exchange. The DLMS/COSEM suite. High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks
- BS-EN-80000-6 - Quantities and units. Electromagnetism
- BS-IEC-62056-8-5 - Electricity metering data exchange. The DLMS/COSEM suite. Narrow-band OFDM G3-PLC communication profile for neighbourhood networks
- PD-6575-2 - Short-circuit currents. Calculation of effects. Examples of calculation
- PD-CLC-50484 - Recommendations for shielded enclosures
- PD-IEC-60865-2 - Short-circuit currents. Calculation of effects. Examples of calculation
- PD-IEC-60909-2 - Short-circuit currents in three-phase a.c. systems. Data of electrical equipment for short-circuit current calculations
- PD-IEC-62056-8-20 - Electricity metering data exchange. The DLMS/COSEM suite. Mesh communication profile for neighbourhood networks

### IEC:

- IEC-1580-2 - Methods of measurement for waveguides - Part 2: Level of intermodulation products
- IEC-60050-121 - International Electrotechnical Vocabulary - Part 121: Electromagnetism
- IEC-60050-121-2 - Amendment 2 - International Electrotechnical Vocabulary - Part 121: Electromagnetism
- IEC-60050-131 - International Electrotechnical Vocabulary - Part 131: Circuit theory
- IEC-60050-131-1 - Amendment 1 - International Electrotechnical Vocabulary - Part 131: Circuit theory
- IEC-60050-131-2 - Amendment 2 - International Electrotechnical Vocabulary - Part 131: Circuit theory
- IEC-60375 - Conventions concerning electric and magnetic circuits
- IEC-60404-11 - Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
- IEC-60404-11-1 - Amendment 1
- IEC-60404-11-AM2 - Amendment 2 - Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
- IEC-60404-15 - Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
- IEC-60404-15-AM1 - Amendment 1 - Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
- IEC-60865-1 - Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
- IEC-60865-2 - Short-circuit currents - Calculation of effects - Part 2: Examples of calculation
- IEC-60909-0 - Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
- IEC-60909-1 - Short-circuit currents in three-phase a.c. systems - Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0
- IEC-60909-2 - Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations
- IEC-60909-3 - Short-circuit currents in three-phase AC systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth
- IEC-60909-3-RL - Short-circuit currents in three-phase AC systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth
- IEC-60909-4 - Short-circuit currents in three-phase a.c. systems - Part 4: Examples for the calculation of short-circuit currents
- IEC-61660-1 - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents
- IEC-61660-2 - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects
- IEC-61660-3 - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 3: Examples of calculations
- IEC-62482 - Electrical installations in ships - Electromagnetic compatibility - Optimising of cable installations on ships - Testing method of routing distance
- IEC-80000-6 - Quantities and units - Part 6: Electromagnetism
- IEC-865-2 - Short-circuit currents - Calculation of effects - Part 2: Examples of calculation

### Other SDOs:

- EN-50445 - Product Family Standard To Demonstrate Compliance of Equipment for Resistance Welding,
- EN-60404-11 - Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
- EN-60404-15 - Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
- EN-60865-1 - Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
- EN-60909-0 - Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
- EN-60909-3 - Part 3: Currents During Two Separate Simultaneous Line-To-Earth Short-Circuits & Parti
- EN-61788-1 - Superconductivity, Critical Current Measurement, D.C. Critical Current of NB-Ti Compos
- EN-61788-2 - Superconductivity, Critical Current Measurement, D.C. Critical Current of Nbsn Composi
- EN-80000-6 - Quantities & Units, Electromagnetism
- SS-EN-61326-1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
- SS-EN-61326-2-6 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment