Document Center List of Standards on Mechanical Testing Including Testing Equipment Mechanical Testing Of Metals, See 77.040.10
ICS Code 19.060
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-A926 - Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe (Withdrawn 2016)
- ASTM-C1314 - Standard Test Method for Compressive Strength of Masonry Prisms
- ASTM-C1322 - Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
- ASTM-C1323 - Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
- ASTM-C1326 - Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
- ASTM-C1327 - Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
- ASTM-C1337 - Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
- ASTM-C29 - Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate
- ASTM-D2714 - Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM-D3580 - Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
- ASTM-D3702 - Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
- ASTM-D4633 - Standard Test Method for Energy Measurement for Dynamic Penetrometers
- ASTM-D5112 - Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products
- ASTM-D5277 - Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
- ASTM-D5748 - Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
- ASTM-D5764 - Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
- ASTM-D5803 - Standard Test Method for Tensile Strength at Zero-Span ("Wet Zero-Span Tensile") (Withdrawn 2009)
- ASTM-D5804 - Standard Test Methods for Zero-Span Tensile Strength ("Dry Zero-Span Tensile") (Withdrawn 2009)
- ASTM-D5856 - Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024)
- ASTM-D5882 - Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
- ASTM-D5963 - Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
- ASTM-D6125 - Standard Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester) (Withdrawn 2010)
- ASTM-D6128 - Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
- ASTM-D6167 - Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
- ASTM-D6175 - Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
- ASTM-D6205 - Standard Practice for Calibration of the James Static Coefficient of Friction Machine
- ASTM-D6243 - Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
- ASTM-D6382 - Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
- ASTM-D6635 - Standard Test Method for Performing the Flat Plate Dilatometer (Withdrawn 2024)
- ASTM-D6643 - Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
- ASTM-D6644 - Standard Test Method for Tension Strength of Sew-Through Flange Buttons
- ASTM-D6648 - Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- ASTM-D6654 - Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser
- ASTM-D6671 - Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
- ASTM-D6745 - Standard Test Method for Linear Thermal Expansion of Electrode Carbons
- ASTM-D8081 - Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell
- ASTM-E1012 - Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
- ASTM-E1049 - Standard Practices for Cycle Counting in Fatigue Analysis
- ASTM-E111 - Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
- ASTM-E1150 - Definitions of Terms Relating to Fatigue (Withdrawn 1996)
- ASTM-E1236 - Standard Practice for Qualifying Charpy Impact Machines as Reference Machines (Withdrawn 2006)
- ASTM-E1237 - Standard Guide for Installing Bonded Resistance Strain Gages
- ASTM-E1253 - Standard Guide for Reconstitution of Charpy-Sized Specimens
- ASTM-E1319 - Standard Guide for High-Temperature Static Strain Measurement
- ASTM-E132 - Standard Test Method for Poisson’s Ratio at Room Temperature
- ASTM-E1595 - Standard Practice for Evaluating the Performance of Mechanical Testing Laboratories (Withdrawn 2002)
- ASTM-E1737 - Test Method for J-Integral Characterization of Fracture Toughness (Withdrawn 1998)
- ASTM-E1823 - Standard Terminology Relating to Fatigue and Fracture Testing
- ASTM-E1856 - Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
- ASTM-E1942 - Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
- ASTM-E1949 - Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
- ASTM-E2207 - Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
- ASTM-E228 - Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
- ASTM-E2368 - Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
- ASTM-E251 - Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
- ASTM-E2624 - Standard Practice for Torque Calibration of Testing Machines
- ASTM-E2658 - Standard Practices for Verification of Speed for Material Testing Machines
- ASTM-E2714 - Standard Test Method for Creep-Fatigue Testing
- ASTM-E289 - Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
- ASTM-E384 - Standard Test Method for Microindentation Hardness of Materials
- ASTM-E4 - Standard Practices for Force Verification of Testing Machines
- ASTM-E6 - Standard Terminology Relating to Methods of Mechanical Testing
- ASTM-E616 - Terminology Relating to Fracture Testing (Withdrawn 1996)
- ASTM-E739 - Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (
S-N ) and Strain-Life (ε-N ) Fatigue Data - ASTM-E742 - Definitions of Terms Relating to Fluid Aqueous and Chemical Environmentally Affected Fatique Testing (Withdrawn 1988)
- ASTM-E83 - Standard Practice for Verification and Classification of Extensometer Systems
- ASTM-E831 - Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM-E912 - Definitions of Terms Relating to Fatigue Loading (Withdrawn 1988)
- ASTM-F1470 - Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
- ASTM-F1589 - Standard Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe
- ASTM-F1641 - Standard Test Method for Measuring Penetration Resistance of Security Glazing Using a Pendulum Impactor (Withdrawn 2004)
- ASTM-F1642 - Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
- ASTM-F1659 - Standard Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on Solid Metallic Substrates (Withdrawn 2005)
- ASTM-F1683 - Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component (Withdrawn 2018)
- ASTM-F1702 - Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
- ASTM-F2095 - Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
- ASTM-F2096 - Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
- ASTM-F2132 - Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps (Withdrawn 2017)
- ASTM-F2136 - Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
- ASTM-G115 - Standard Guide for Measuring and Reporting Friction Coefficients
- ASTM-G117 - Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests (Withdrawn 2016)
- ASTM-G132 - Standard Test Method for Pin Abrasion Testing
- ASTM-G133 - Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
- ASTM-G134 - Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- ASTM-G137 - Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
- ASTM-G163 - Standard Guide for Digital Data Acquisition in Wear and Friction Measurements (Withdrawn 2016)
- ASTM-G176 - Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
- ASTM-G195 - Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
- ASTM-G211 - Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
- ASTM-G73 - Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
- ASTM-G77 - Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
BSI:
- BS-1610-1 - Materials testing machines and force verification equipment. Specification for the grading of the forces applied by materials testing machines when used in the compression mode
- BS-4415-2 - Determination of the tensile properties of paper and board
- BS-6036 - Method for determination of the edgewise crush resistance of corrugated fibreboard
- BS-6140-1 - Test Equipment for Generating Vibration, Methods of Describing Characteristics of Elec
- BS-6140-2 - Test equipment for generating vibration.
- BS-6888 - Methods for calibration of bonded electrical resistance strain gauges
- BS-7976-1 - Pendulum testers
- BS-7976-2 - Pendulum testers
- BS-7976-3 - Pendulum testers
- BS-8607 - Mechanically operated push button locksets. Requirements and test methods
- BS-EN-ISO-7500-1 - Metallic materials. Calibration and verification of static uniaxial testing machines
- BS-ISO-11451-5 - Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy
- BS-ISO-14243-1 - Implants for surgery. Wear of total knee-joint prostheses
- BS-ISO-8568 - Mechanical shock. Testing machines. Characteristics and performance
IEC:
ISO:
- ISO/TTA-2 - Tensile tests for discontinuously reinforced metal matrix composites at ambiant temperatures
- ISO/TTA-5 - Code of practice for creep/fatigue testing of cracked components
Other SDOs:
- AWPA-E4 - Standard Practices for Force Verification of Testing Machines
- DIN-EN-10002-1 - Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001
- DIN-EN-10002-2 - Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines; German version EN 10002-2:1991
- DIN-EN-10002-3 - Metallic materials - Tensile test - Part 3: Calibration of force proving instruments used for the verification of uniaxial testing machines; German version EN 10002-3:1994
- DIN-EN-10002-3-1 - Supplement 1 To Din-En-10002-3
- DIN-EN-10002-4 - Metallic materials - Tensile test - Part 4: Verification of extensometers used in uniaxial testing; German version EN 10002-4:1994
- DIN-EN-10002-4-SUP - Metallic materials - Tensile test - Part 4: Verification of extensometers used in uniaxial testing; examples for extensometers and their verification
- DIN-EN-10002-5 - Tensile testing of metallic materials; method of testing at elevated temperature; german version EN 10002-5:1991
- DIN-EN-ISO-14577-2 - Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
- DIN-EN-ISO-4545-2 - Part 2: Verification & Calibration of Testing Machines, Metallic Materials - Knoop Har
- DIN-EN-ISO-4545-3 - Part 3: Calibration of Reference Blocks, Metallic Materials - Knoop Hardness Test
- DIN-EN-ISO-6506-2 - Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
- DIN-EN-ISO-6506-3 - Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
- DIN-EN-ISO-6507-2 - Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005)
- DIN-EN-ISO-6507-3 - Part 3: Calibration of Reference Blocks, Metallic Materials - Vickers Hardness Test
- DIN-EN-ISO-6508-2 - Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters
- DIN-EN-ISO-6508-3 - Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks
- DIN-EN-ISO-7500-1 - Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
- DIN-EN-ISO-7500-2 - Part 2: Tension Creep Testing Machines - Verification of the Applied Force, Metallic M
- JIS-B-7725 - Vickers hardness test -- Verification and calibration of testing machines
- JIS-B-7728 - Calibration of force-proving instruments used for the verification of uniaxial testing machines
- JIS-B-7735 - Vickers hardness test -- Calibration of reference blocks
- JIS-Z-2255 - Method for ultra-low loaded hardness test
- SS-EN-10002-2 - Metallic materials - Tensile testing - Part 2: Verification of the force measuring system of the tensile testing machines
- SS-EN-10002-3 - Metallic materials - Tensile test - Part 3: Calibration of force proving instruments used for the verification of uniaxial testing machines
- SS-EN-10002-4 - Metallic materials - Tensile testing - Part 4: Verification of extensometers used in uniaxial testing
- SS-EN-10045-2 - Metallic materials - Charpy impact test - Part 2:Verification of the testing machine (pendulum impact)
- SS-EN-877 - Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
- SS-EN-ISO-4545-2 - Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017)
- SS-EN-ISO-4545-3 - Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)
- SS-EN-ISO-7500-1 - Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
- SS-EN-ISO-7500-2 - Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006)
- SS-ISO-8568 - Vibration and shock - Mechanical vibration and shock - Shock-testing machines - Characteristics andperformance
- UNE-EN-ISO-7500-1 - Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system