Document Center List of Standards on Particle Size Analysis. Sieving Including Test Sieves And Porosimetry
ICS Code 19.120
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-B293 - Method of Subsieve Analysis of Granular Metal Powders by Air Classification (Withdrawn 1984)
- ASTM-B821 - Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
- ASTM-B822 - Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
- ASTM-C429 - Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
- ASTM-D1140 - Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
- ASTM-D1214 - Standard Test Method for Sieve Analysis of Glass Spheres
- ASTM-D1366 - Standard Practice for Reporting Particle Size Characteristics of Pigments
- ASTM-D1705 - Test Method for Particle Size Analysis of Powdered Polymers and Copolymers of Vinyl Chloride (Withdrawn 1998)
- ASTM-D1921 - Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM-D2217 - Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2007)
- ASTM-D2862 - Standard Test Method for Particle Size Distribution of Granular Activated Carbon
- ASTM-D2977 - Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
- ASTM-D4438 - Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
- ASTM-D4464 - Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
- ASTM-D4513 - Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
- ASTM-D4749 - Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM-D502 - Standard Test Method for Particle Size of Soaps and Other Detergents
- ASTM-D5158 - Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
- ASTM-D5159 - Standard Guide for Dusting Attrition of Granular Activated Carbon
- ASTM-D5444 - Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM-D5519 - Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
- ASTM-D5604 - Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
- ASTM-D5711 - Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012)
- ASTM-D6393 - Standard Test Method for Bulk Solids Characterization by Carr Indices
- ASTM-D6683 - Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
- ASTM-D6940 - Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
- ASTM-D6941 - Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
- ASTM-D7891 - Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
- ASTM-E1037 - Standard Test Method for Measuring Particle Size Distribution of RDF-5
- ASTM-E11 - Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
- ASTM-E112 - Standard Test Methods for Determining Average Grain Size
- ASTM-E1181 - Standard Test Methods for Characterizing Duplex Grain Sizes
- ASTM-E1382 - Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
- ASTM-E1458 - Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
- ASTM-E1617 - Standard Practice for Reporting Particle Size Characterization Data
- ASTM-E1638 - Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
- ASTM-E1772 - Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM-E1919 - Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization (Withdrawn 2014)
- ASTM-E20 - Practice for Particle Size Analysis of Particulate Substances in the Range of 0.2 to 75 UM by Optical Microscopy (Withdrawn 1994)
- ASTM-E2427 - Standard Test Method for Acceptance by Performance Testing for Test Sieves
- ASTM-E2578 - Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
- ASTM-E2589 - Standard Terminology Relating to Nonsieving Methods of Powder Characterization
- ASTM-E2651 - Standard Guide for Powder Particle Size Analysis
- ASTM-E276 - Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
- ASTM-E2776 - Standard Guide for Correlation of Results of Solid Particle Size Measurement Instruments
- ASTM-E2814 - Standard Specification for Industrial Woven Wire Filter Cloth
- ASTM-E2980 - Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
- ASTM-E323 - Standard Specification for Perforated-Plate Sieves for Testing Purposes
- ASTM-E389 - Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
- ASTM-E454 - Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM-E674 - Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM-E726 - Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
- ASTM-E828 - Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis (Withdrawn 2009)
- ASTM-E930 - Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
- ASTM-F1877 - Standard Practice for Characterization of Particles
- ASTM-F577 - Standard Test Method for Particle Size Measurement of Dry Toners (Withdrawn 2017)
- ASTM-F660 - Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
- ASTM-F661 - Practice for Particle Count and Size Distribution Measurement in Batch Samples for Filter Evaluation Using an Optical Particle Counter (Withdrawn 2001)
- ASTM-F751 - Standard Test Method for Measuring Particle Size of Wide-Size Range Dry Toners (Withdrawn 2003)
BSI:
- BS-1796-1 - Test sieving
- BS-3406-1 - Methods for determination of particle size distribution
- BS-3406-4 - Methods for determination of particle size distribution
- BS-3406-6 - Methods for determination of particle size distribution
- BS-3406-8 - Methods for determination of particle size distribution. Photon correlation spectroscopy
- BS-3406-9 - Recommendation for the Filter Blockage Method (Mesh Obstruction)
- BS-3625 - Specification for eyepiece and screen graticules for the determination of the particle size of powders
- BS-410 - Specification for test sieves
- BS-410-1 - Test sieves. Technical requirements and testing
- BS-410-2 - Test sieves. Technical requirements and testing
- BS-5851 - Specification for grain sizes of diamond or cubic boron nitride
- BS-6219 - Test sieves for cereals
- BS-7425-4 - Abrasive grains. Specification for test-sieving machines
- BS-812-1 - Methods for Determination of Particle Size & Sharp
- BS-8471 - Guide to particle sizing methods
- BS-EN-ISO-5223 - Test sieves for cereals
- BS-ISO-12154 - Determination of density by volumetric displacement. Skeleton density by gas pycnometry
- BS-ISO-13099-1 - Colloidal systems. Methods for zeta-potential determination
- BS-ISO-13099-2 - Colloidal systems. Methods for zetapotential determination
- BS-ISO-13099-3 - Colloidal systems. Methods for zeta potential determination
- BS-ISO-13317-1 - Determination of particle size distribution by gravitational liquid sedimentation methods
- BS-ISO-13317-2 - Determination of particle size distribution by gravitational liquid sedimentation methods
- BS-ISO-13317-3 - Determination of particle size distribution by gravitational liquid sedimentation methods
- BS-ISO-13317-4 - Determination of particle size distribution by gravitational liquid sedimentation methods
- BS-ISO-13318-1 - Determination of particle size distribution by centrifugal liquid sedimentation methods
- BS-ISO-13318-2 - Determination of particle size distribution by centrifugal liquid sedimentation methods
- BS-ISO-13318-3 - Determination of particle size distribution by centrifugal liquid sedimentation methods
- BS-ISO-13319 - Determination of particle size distributions. Electrical sensing zone method
- BS-ISO-13319-1 - Determination of particle size distribution. Electrical sensing zone method
- BS-ISO-13320 - Particle size analysis. Laser diffraction methods
- BS-ISO-13320-1 - Part 1: General Principles
- BS-ISO-13322-1 - Particle size analysis. Image analysis methods
- BS-ISO-13322-2 - Particle size analysis. Image analysis methods
- BS-ISO-13322-2-TC - Tracked Changes. Particle size analysis. Image analysis methods
- BS-ISO-14488 - Particulate materials. Sampling and sample splitting for the determination of particulate properties
- BS-ISO-14887 - Sample preparation. Dispersing procedures for powders in liquids
- BS-ISO-15900 - Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
- BS-ISO-15901-1 - Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption
- BS-ISO-15901-1-TC - Tracked Changes. Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption
- BS-ISO-15901-2 - Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption
- BS-ISO-15901-3 - Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption
- BS-ISO-17867 - Particle size analysis. Small angle X-ray scattering (SAXS)
- BS-ISO-18747-1 - Determination of particle density by sedimentation methods
- BS-ISO-18747-2 - Determination of particle density by sedimentation methods
- BS-ISO-19430 - Particle size analysis. Particle tracking analysis (PTA) method
- BS-ISO-20804 - Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
- BS-ISO-20998-1 - Measurement and characterization of particles by acoustic methods
- BS-ISO-20998-2 - Measurement and characterization of particles by acoustic methods.
- BS-ISO-20998-3 - Measurement and characterization of particles by acoustic methods
- BS-ISO-21501-1 - Determination of particle size distribution. Single particle light interaction methods
- BS-ISO-21501-2 - Determination of particle size distribution. Single particle light interaction methods
- BS-ISO-21501-3 - Determination of particle size distribution. Single particle light interaction methods
- BS-ISO-21501-4 - Determination of particle size distribution. Single particle light interaction methods
- BS-ISO-22412 - Particle size analysis. Dynamic light scattering (DLS)
- BS-ISO-26824 - Particle characterization of particulate systems. Vocabulary
- BS-ISO-26824-TC - Tracked Changes. Particle characterization of particulate systems. Vocabulary
- BS-ISO-27891 - Aerosol particle number concentration. Calibration of condensation particle counters
- BS-ISO-3310-1 - Test sieves. Technical requirements and testing
- BS-ISO-3310-2 - Test sieves. Technical requirements and testing
- BS-ISO-4782 - Specification for metal wire for industrial wire screens and woven wire cloth
- BS-ISO-9044 - Industrial woven wire cloth. Technical requirements and tests
- BS-ISO-9276-1 - Representation of results of particle size analysis
- BS-ISO-9276-2 - Representation of results of particle size analysis
- BS-ISO-9276-3 - Representation of results of particle size analysis
- BS-ISO-9276-4 - Representation of results of particle size analysis
- BS-ISO-9276-5 - Representation of results of particle size analysis
- BS-ISO-9276-6 - Representation of results of particle size analysis
- BS-ISO-9277 - Determination of the specific surface area of solids by gas adsorption. BET method
- BS-ISO-9277-TC - Tracked Changes. Determination of the specific surface area of solids by gas adsorption. BET method
- BS-ISO-9284 - Abrasive grains. Test-sieving machines
- DD-ISO-13762 - Particle size analysis. Small angle X-ray scattering method
- PD-ISO-13097 - Guidelines for the characterization of dispersion stability
- PD-ISO-14411-1 - Preparation of particulate reference materials
- PD-ISO-19997 - Guidelines for good practices in zeta-potential measurement
- PD-ISO-22107 - Dispersibility of solid particles into a liquid
- PD-ISO-22814 - Good practice for dynamic light scattering (DLS) measurements
- PD-ISO-4807 - Reference materials for particle size measurement. Specification of requirements
ISO:
- ISO-12154 - Determination of density by volumetric displacement - Skeleton density by gas pycnometry
- ISO-13097 - Guidelines for the characterization of dispersion stability
- ISO-13099-1 - Colloidal systems - Methods for zeta-potential determination - Part 1: Electroacoustic and electrokinetic phenomena
- ISO-13099-2 - Colloidal systems - Methods for zeta-potential determination - Part 2: Optical methods
- ISO-13099-3 - Colloidal systems - Methods for zeta potential determination - Part 3: Acoustic methods
- ISO-13317-1 - Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 1: General principles and guidelines
- ISO-13317-2 - Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method
- ISO-13317-3 - Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 3: X-ray gravitational technique
- ISO-13317-4 - Determination of particle size distribution by gravitational liquid sedimentation methods - Part 4: Balance method
- ISO-13318-1 - Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 1: General principles and guidelines
- ISO-13318-2 - Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method
- ISO-13318-3 - Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 3: Centrifugal X-ray method
- ISO-13319 - Determination of particle size distributions - Electrical sensing zone method
- ISO-13319-1 - Determination of particle size distribution - Electrical sensing zone method - Part 1: Aperture/orifice tube method
- ISO-13320 - Particle size analysis - Laser diffraction methods
- ISO-13320-1 - Particle size analysis -- Laser diffraction methods -- Part 1: General principles
- ISO-13321 - Particle size analysis -- Photon correlation spectroscopy
- ISO-13322-1 - Particle size analysis - Image analysis methods - Part 1: Static image analysis methods
- ISO-13322-2 - Particle size analysis - Image analysis methods - Part 2: Dynamic image analysis methods
- ISO-13323-1 - Determination of particle size distribution -- Single-particle light interaction methods -- Part 1: Light interaction considerations
- ISO-14411-1 - Preparation of particulate reference materials - Part 1: Polydisperse material based on picket fence of monodisperse spherical particles
- ISO-14411-2 - Preparation of particulate reference materials - Part 2: Polydisperse spherical particles
- ISO-14488 - Particulate materials - Sampling and sample splitting for the determination of particulate properties
- ISO-14488-AM1 - - Amendment 1
- ISO-14887 - Sample preparation -- Dispersing procedures for powders in liquids
- ISO-15900 - Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles
- ISO-15901-1 - Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry
- ISO-15901-2 - Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of nanopores by gas adsorption
- ISO-15901-3 - Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption
- ISO-17867 - Particle size analysis - Small angle X-ray scattering (SAXS)
- ISO-18747-1 - Determination of particle density by sedimentation methods - Part 1: Isopycnic interpolation approach
- ISO-18747-2 - Determination of particle density by sedimentation methods - Part 2: Multi-velocity approach
- ISO-19430 - Particle size analysis - Particle tracking analysis (PTA) method
- ISO-19997 - Guidelines for good practices in zeta-potential measurement
- ISO-20804 - Determination of the specific surface area of porous and particulate systems by small-angle X-ray scattering (SAXS)
- ISO-20998-1 - Measurement and characterization of particles by acoustic methods - Part 1: Concepts and procedures in ultrasonic attenuation spectroscopy
- ISO-20998-2 - Measurement and characterization of particles by acoustic methods - Part 2: Linear theory
- ISO-20998-3 - Measurement and characterization of particles by acoustic methods - Part 3: Guidelines for non-linear theory
- ISO-21501-1 - Determination of particle size distribution - Single particle light interaction methods - Part 1: Light scattering aerosol spectrometer
- ISO-21501-2 - Determination of particle size distribution - Single particle light interaction methods - Part 2: Light scattering liquid-borne particle counter
- ISO-21501-3 - Determination of particle size distribution - Single particle light interaction methods - Part 3: Light extinction liquid-borne particle counter
- ISO-21501-4 - Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
- ISO-21501-4-AM1 - - Amendment 1: Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces - Amendment 1
- ISO-22107 - Dispersibility of solid particles into a liquid
- ISO-22412 - Particle size analysis - Dynamic light scattering (DLS)
- ISO-22814 - Good practice for dynamic light scattering (DLS) measurements
- ISO-2395 - Test sieves and test sieving -- Vocabulary
- ISO-2591-1 - Test sieving -- Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
- ISO-26824 - Particle characterization of particulate systems - Vocabulary
- ISO-27891 - Aerosol particle number concentration - Calibration of condensation particle counters
- ISO-3310-1 - Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
- ISO-3310-2 - Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate
- ISO-3310-3 - Test sieves -- Technical requirements and testing -- Part 3: Test sieves of electroformed sheets
- ISO-4807 - Reference materials for particle size measurement - Specification of requirements
- ISO-565 - Test sieves -- Metal wire cloth, perforated metal plate and electroformed sheet -- Nominal sizes of openings
- ISO-9276-1 - Representation of results of particle size analysis -- Part 1: Graphical representation
- ISO-9276-2 - Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
- ISO-9276-3 - Representation of results of particle size analysis - Part 3: Adjustment of an experimental curve to a reference model
- ISO-9276-4 - Representation of results of particle size analysis -- Part 4: Characterization of a classification process
- ISO-9276-4-AM1 - - Amendment 1: Additional explanations and minor corrections
- ISO-9276-5 - Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
- ISO-9276-6 - Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology
- ISO-9277 - Determination of the specific surface area of solids by gas adsorption - BET method
- ISO-9284 - Abrasive grains - Test-sieving machines
Other SDOs:
- AWPA-E11 - Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
- DIN-ISO-13321 - Particle Size Analysis, Photon Correlation Spectroscopy
- DIN-ISO-9276-1 - Part 1: Graphical Representation, Representation of Results of Particle Size Analysis
- DIN-ISO-9276-2 - Part 2: Calculation of Average Particle Sizes/Diameters & Moments From Particle Size D
- DIN-ISO-9276-4 - Part 4: Characterization of a Classification Process, Representation of Results of Par
- DIN-ISO-9277 - Determination of the specific surface area of solids by gas adsorption - BET method (ISO 9277:2010)
- JIS-B-9921 - Light scattering airborne particle counter for clean spaces
- JIS-B-9923 - Clean room garment -- Methods for sizing and counting particle contaminants in and on clean room garments
- JIS-B-9925 - Light scattering liquid-borne particle counter
- SS-EN-932-3 - Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description
- SS-ISO-13317-1 - Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles and guidelines (ISO 13317-1:2001, IDT)
- SS-ISO-13317-2 - Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method (ISO 13317-2:2001, IDT)
- SS-ISO-13317-3 - Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3: X-ray gravitational technique (ISO 13317-3:2001, IDT)
- SS-ISO-13318-1 - Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines (ISO 13318-1:2001, IDT)
- SS-ISO-13318-2 - Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method (ISO 13318-2:2001, IDT)
- SS-ISO-13318-3 - Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 3: Centrifugal X-ray method (ISO 13318-3:2004, IDT)
- SS-ISO-13319 - Determination of particle size distribuitons - Electrical sensing zone method
- SS-ISO-13320-1 - Particle size analysis - Laser diffraction methods - Part 1: General principles
- SS-ISO-13321 - Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996, IDT)
- SS-ISO-13323-1 - Determination of particle size distribution - Single-particle light interaction methods - Part 1: Light interaction considerations
- SS-ISO-14887 - Sample preparation - Dispersing procedures for powders in liquid
- SS-ISO-15901-1 - Pore size distribution and porosimetry of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry (ISO 15901-1:2005, IDT)
- SS-ISO-6106 - Abrasive products - Checking the grain size of superabrasives (ISO 6106:2013, IDT)
- SS-ISO-9276-1 - Representation of results of particle size analysis - Part 1: Graphical representation
- SS-ISO-9276-2 - Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001, IDT)
- SS-ISO-9276-4 - Representation of results of particle size analysis - Part 4: Characterization of a classification process
- SS-ISO-9276-5 - Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution (ISO 9276-5:2005, IDT)
- SS-ISO-9277 - Determination of the specific surface area of solids by gas adsorption using the BET method