Document Center is acquired by Nimonik

Document Center List of Standards on Special Screw Threads Including Miniature Screw Threads, Pipe Threads, Etc.

ICS Code 21.040.30

Return to ICS Index.

Up to Level 2:

• 21.040 (Screw threads Screw threads for aerospace construction, see 49.030.10)

The following documents are a part of this series:

ASTM:

• ASTM-D1694 - Standard Specification for Threads 60° (Stub) for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe (Withdrawn 2005)

BSI:

• BS-4185-10 - Machine tool components
• BS-811 - Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
• BS-919-1 - Screw gauge limits and tolerances
• BS-919-4 - Screw gauge limits and tolerances
• BS-93 - British Association (B.A.) screw threads. Requirements
• BS-EN-10226-1 - Pipe threads where pressure tight joints are made on the threads
• BS-EN-10226-2 - Pipe threads where pressure tight joints are made on the threads
• BS-EN-10226-3 - Pipes threads where pressure-tight joints are made on the threads
• BS-EN-ISO-11116-2 - Part 2: Inspection Gauges
• BS-EN-ISO-11363-1 - Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders
• BS-EN-ISO-11363-1-TC - Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders
• BS-EN-ISO-11363-2 - Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders
• BS-EN-ISO-11363-2-TC - Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders
• BS-EN-ISO-1478 - Tapping screw thread
• BS-EN-ISO-15245-1 - Gas cylinders. Parallel threads for connection of valves to gas cylinders
• BS-EN-ISO-15245-1-TC - Tracked Changes. Gas cylinders. Parallel threads for connection of valves to gas cylinders
• BS-EN-ISO-15245-2 - Gas cylinders. Parallel threads for connection of valves to gas cylinders
• BS-EN-ISO-228-1 - Pipe threads where pressure-tight joints are not made on the threads
• BS-EN-ISO-228-2 - Pipe threads where pressure-tight joints are not made on the threads
• BS-ISO-1501 - ISO miniature screw threads

ISO:

• ISO-1478 - Tapping screws thread
• ISO-1501 - ISO miniature screw threads
• ISO-1501-AM1 - - Amendment 1: The figure for the tolerance zone of external thread
• ISO-228-1 - Pipe threads where pressure-tight joints are not made on the threads -- Part 1: Dimensions, tolerances and designation
• ISO-228-2 - Pipe threads where pressure-tight joints are not made on the threads - Part 2 : Verification by means of limit gauges
• ISO-7-1 - Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
• ISO-7-2 - Pipe threads where pressure-tight joints are made on the threads -- Part 2: Verification by means of limit gauges

Other SDOs:

• DIN-6063-1 - Part 1: Buttress Threads, Dimensions, Threads, Mainly for Plastic Cotainers
• DIN-6063-2 - Part 2: Trapezoidal Screw Threads, Dimensions, Threads, Mainly for Plastic Containers
• DIN-EN-10226-1 - Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
• DIN-EN-10226-2 - Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
• DIN-EN-10226-3 - Pipes threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005
• DIN-EN-ISO-15245-1 - Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013)
• DIN-EN-ISO-228-1 - Part 1: Dimensions, Tolerances & Designation, Pipe Threads Where Pressure-Tight Joints
• DIN-EN-ISO-228-2 - Part 2: Verification by Means of Limit Gauges, Pipe Threadswhere Pressure-Tight Joint
• EN-10226-1 - Part 1: Taper External Threads & Parallel Internal Threads - Dimensions, Tolerances &
• EN-10226-2 - Part 2: Taper Extenal Threads & Taper Internal Threads - Dimensions, Tolerances & Desi
• EN-10226-3 - Part 3: Verification by Means of Limit Gauges, Pipe Threads Where Pressure-Tight Join
• EN-ISO-11363-2 - Part 2: Inspection Gauges, Gas Cylinders - 17E & 25E Taper Threads for Connection of V
• EN-ISO-1478 - Tapping Scew Threads
• JIS-B-0202 - Parallel pipe threads
• JIS-B-0203 - Taper pipe threads
• JIS-B-1119 - Machine screws and nuts for spectacle frames
• SS-EN-10226-1 - Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
• SS-EN-10226-2 - Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
• SS-EN-10226-3 - Pipe threads where pressure tight joints are made on the threads - Part 3: Verification by means of limit gauges
• SS-EN-12674-3 - Roll containers - Part 3: Test methods
• SS-EN-13160-5 - Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
• SS-EN-ISO-11363-1 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
• SS-EN-ISO-11363-2 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
• SS-EN-ISO-1478 - Tapping screws thread (ISO 1478:1999)
• SS-EN-ISO-228-1 - Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
• SS-EN-ISO-228-2 - Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
• SS-ISO-1501 - ISO miniature screw threads (ISO 1501:2009, IDT)
• SS-ISO-1718 - Rock drilling equipment - Drill rods with tapered connection for percussive drilling
• SS-ISO-2901 - ISO metric trapezoidal screw threads - Basic and design profiles (ISO 2901:2016, IDT)
• SS-ISO-2902 - ISO metric trapezoidal screw threads - General plan (ISO 2902:2016, IDT)
• SS-ISO-2903 - ISO metric trapezoidal screw threads - Tolerances (ISO 2903:2016, IDT)
• SS-ISO-2904 - ISO metric trapezoidal screw threads - Basic dimensions (ISO 2904:2020, IDT)