Document Center List of Standards on Bolts, Screws, Studs
ICS Code 21.060.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A183 - Standard Specification for Carbon Steel Track Bolts and Nuts
- ASTM-A307 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
- ASTM-A325 - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)
- ASTM-A325M - Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) (Withdrawn 2016)
- ASTM-A354 - Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
- ASTM-A394 - Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
- ASTM-A449 - Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
- ASTM-A489 - Standard Specification for Carbon Steel Eyebolts
- ASTM-A490 - Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)
- ASTM-A490M - Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
- ASTM-A574 - Standard Specification for Alloy Steel Socket-Head Cap Screws
- ASTM-A574M - Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric) (Withdrawn 2015)
- ASTM-A614 - Specification for Special Requirements for Bolting Material for Nuclear and Other Special Applications (Withdrawn 1986)
- ASTM-A66 - Standard Specification for Steel Screw Spikes
- ASTM-A687 - Standard Specification for High-Strength Nonheaded Steel Bolts and Studs (Withdrawn 1999)
- ASTM-C1002 - Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
- ASTM-C1007 - Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
- ASTM-C1513 - Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
- ASTM-C954 - Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
- ASTM-F1077 - Standard Guide for Selection of Committee F16 Fastener Specifications (Withdrawn 2014)
- ASTM-F1179 - Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs (Withdrawn 2020)
- ASTM-F1554 - Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
- ASTM-F2155 - Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
- ASTM-F2281 - Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
- ASTM-F2403 - Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength (Withdrawn 2016)
- ASTM-F2482 - Standard Specification for Load-Indicating Externally Threaded Fasteners
- ASTM-F2660 - Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
- ASTM-F2882 - Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
- ASTM-F2882M - Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric] (Withdrawn 2017)
- ASTM-F3042 - Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
- ASTM-F3125 - Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
- ASTM-F3148 - Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
- ASTM-F432 - Standard Specification for Roof and Rock Bolts and Accessories
- ASTM-F468 - Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- ASTM-F468M - Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
- ASTM-F541 - Standard Specification for Alloy Steel Eyebolts
- ASTM-F568M - Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012)
- ASTM-F592 - Standard Terminology of Collated and Cohered Fasteners and Their Application Tools (Withdrawn 2017)
- ASTM-F593 - Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
- ASTM-F704 - Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
- ASTM-F738M - Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs (Withdrawn 2015)
- ASTM-F788 - Standard Practice for Radiographic Examination Using Digital Detector Arrays
- ASTM-F835 - Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
- ASTM-F835M - Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
- ASTM-F837 - Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
- ASTM-F837M - Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
- ASTM-F879 - Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
- ASTM-F879M - Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
- ASTM-F880 - Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
- ASTM-F880M - Standard Specification for Stainless Steel Socket Set Screws (Metric)
- ASTM-F901 - Standard Specification for Aluminum Transmission Tower Bolts and Nuts
- ASTM-F912 - Standard Specification for Alloy Steel Socket Set Screws
- ASTM-F912M - Standard Specification for Alloy Steel Socket Set Screws (Metric)
BSI:
- BS-1083 - Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
- BS-1210 - Specification for wood screws
- BS-1768 - Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads). Normal series
- BS-1769 - Specification. Unified black hexagon bolts, screws, nuts (UNC and UNF threads). Heavy series
- BS-1981 - Specification for unified machine screws and machine screw nuts
- BS-2470 - Specification for hexagon socket screws and wrench keys. Inch series
- BS-2693-1 - Specification for screwed studs
- BS-2693-2 - Specification for screwed studs. Recommendations for high grade studs (with Class 5 interference fit threads to American Standard ASA B1.12)
- BS-325 - Specification for black cup and countersunk bolts and nuts
- BS-3692 - ISO metric precision hexagon bolts, screws and nuts. Specification
- BS-4168-1 - Hexagon socket screws and wrench keys: metric series
- BS-4168-2 - Hexagon Socket Screws and Wrench Keys: Metric Series, Specification for Hexagon Socket S
- BS-4168-3 - Hexagon Socket Screws and Wrench Keys: Metric Series, Specification for Hexagon Socket S
- BS-4168-4 - Hexagon Socket Screws and Wrench Keys: Metric Series, Specification for Hexagon Socket S
- BS-4168-5 - Hexagon Socket Screws and Wrench Keys: Metric Series, Specification for Hexagon Socket S
- BS-4168-6 - Hexagon socket screws and wrench keys: metric series
- BS-4168-7 - Hexagon socket screws and wrench keys: metric series
- BS-4168-8 - Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket countersunk head screws
- BS-4174 - Specification for self-tapping screws and metallic drive screws
- BS-4183 - Specification for machine screws and machine screw nuts. Metric series
- BS-4190 - ISO metric black hexagon bolts, screws and nuts. Specification
- BS-450 - Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
- BS-4604-1 - General Grade, Specification for the Use of High Strength Friction Grip Bolts in Struc
- BS-4604-2 - Specification for the Use of High Strength Friction Grip Bolts in Structural Steelwork
- BS-57 - Specification. B.A. screws bolts and nuts
- BS-6104-3 - Mechanical properties of fasteners. Specification for set screws and similar threaded fasteners not under tensile stresses
- BS-6565 - Method for dimensioning and designating bolts, screws, studs and nuts
- BS-6605 - Specification for cross recesses for screws
- BS-7345 - Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts
- BS-7364 - Specification for galvanized steel studs and channels for stud and sheet partitions and linings using screw fixed gypsum wallboards
- BS-7371-12 - Coatings on metal fasteners. Requirements for imperial fasteners
- BS-7371-7 - Coatings on metal fasteners
- BS-7419 - Specification for holding down bolts
- BS-7433-1 - Cross recessed machine screws. Specification for pan head screws of product grade A
- BS-7433-2 - Cross recessed machine screws. Specification for countersunk flat head screws product grade A and property class 4.8 only
- BS-7433-3 - Cross recessed machine screws. Specification for raised countersunk head screws product grade A
- BS-7496-1 - Cross-recessed tapping screws. Specification for pan head screws
- BS-7496-2 - Cross-recessed tapping screws. Specification for countersunk flat head screws
- BS-7496-3 - Cross-recessed tapping screws. Specification for raised countersunk head screws
- BS-7600 - Specification for hexagon flange head tapping screws
- BS-7670-2 - Steel nuts and bolts for resistance projection welding
- BS-768 - Specification for slotted grub screws
- BS-7715 - Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
- BS-916 - Specification for black bolts, screws and nuts, hexagon and square, with B.S.W. threads, and partly machined bolts, screws and nuts, hexagon and square, with B.S.W. or B.S.F. threads
- BS-EN-14219 - Hexagon bolts with flange with metric fine pitch thread. Small series
- BS-EN-14399-3 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-3-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-14399-4 - High-strength structural bolting assemblies for preloading
- BS-EN-14399-4-TC - Tracked Changes. High-strength structural bolting assemblies for preloading
- BS-EN-14831 - Fasteners. Tightening performance. Torque/Angle simplified test method
- BS-EN-1515-1 - Flanges and their joints. Bolting
- BS-EN-1515-3 - Flanges and their joints. Bolting
- BS-EN-1515-4 - Flanges and their joints. Bolting
- BS-EN-1662 - Hexagon bolts with flange. Small series
- BS-EN-1665 - Hexagon bolts with flange. Heavy series
- BS-EN-20225 - Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions
- BS-EN-22340 - Clevis pins without head
- BS-EN-22341 - Clevis pins with head
- BS-EN-24015 - Hexagon head bolts. Product grade B. Reduced shank (shank diameter pitch diameter)
- BS-EN-24766 - Slotted Set Screws With Flat Point
- BS-EN-26157-1 - Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
- BS-EN-26157-3 - Fasteners. Surface discontinuities.
- BS-EN-27434 - Slotted set screws with cone point
- BS-EN-27435 - Slotted set screws with long dog point
- BS-EN-27436 - Slotted set screws with cup point
- BS-EN-27721 - Countersunk head screws. Head configuration and gauging
- BS-EN-ISO-10510 - Tapping screw and washer assemblies with plain washers
- BS-EN-ISO-10642 - Fasteners. Hexagon socket countersunk head screws with reduced loadability
- BS-EN-ISO-10644 - Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV
- BS-EN-ISO-10664 - Hexalobular internal driving feature for bolts and screws
- BS-EN-ISO-10666 - Drilling screws with tapping screw threads. Mechanical and functional properties
- BS-EN-ISO-1207 - Slotted cheese head screws. Product grade A
- BS-EN-ISO-13918 - Welding. Studs and ceramic ferrules for arc stud welding
- BS-EN-ISO-14579 - Hexalobular socket head cap screws
- BS-EN-ISO-14580 - Hexalobular socket cheese head screws
- BS-EN-ISO-14581 - Fasteners. Hexalobular socket countersunk flat head screws (common head style) with reduced loadability
- BS-EN-ISO-14582 - Fasteners. Hexalobular socket countersunk head screws, high head
- BS-EN-ISO-14583 - Hexalobular socket pan head screws
- BS-EN-ISO-14584 - Hexalobular socket raised countersunk head screws
- BS-EN-ISO-14585 - Hexalobular socket pan head tapping screws
- BS-EN-ISO-14586 - Hexalobular socket countersunk head tapping screws
- BS-EN-ISO-14587 - Hexalobular socket raised countersunk (oval) head tapping screws
- BS-EN-ISO-1479 - Hexagon head tapping screws
- BS-EN-ISO-1481 - Slotted pan head tapping screws
- BS-EN-ISO-1482 - Slotted countersunk (flat) head tapping screws
- BS-EN-ISO-1483 - Slotted raised countersunk (oval) head tapping screws
- BS-EN-ISO-15480 - Fasteners. Hexagon washer head drilling screws with tapping screw thread
- BS-EN-ISO-15481 - Cross recessed pan head drilling screws with tapping screw thread
- BS-EN-ISO-15482 - Cross recessed countersunk head drilling screws with tapping screw thread
- BS-EN-ISO-1580 - Slotted pan head screws. Product grade A
- BS-EN-ISO-2009 - Slotted countersunk flat head screws. Product grade A
- BS-EN-ISO-2010 - Slotted raised countersunk head screws. Product grade A
- BS-EN-ISO-21269 - Hexagon socket head cap screws with metric fine pitch thread
- BS-EN-ISO-225 - Fasteners. Bolts, screws, studs and nuts. Symbols and descriptions of dimensions
- BS-EN-ISO-2342 - Slotted headless screws with shank
- BS-EN-ISO-23429 - Gauging of hexagon sockets
- BS-EN-ISO-2702-TC - Tracked Changes. Fasteners. Heat treated tapping screws. Mechanical and physical properties
- BS-EN-ISO-3506-1 - Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners
- BS-EN-ISO-3506-1/2 EX COMM - Expert Commentary for BS EN ISO 3506-1:2020 and BS EN ISO 3506-2:2020. Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners. Bolts, screws and studs with specified grades and property classes. Nuts with specified grades and property classes
- BS-EN-ISO-3506-1-TC - Tracked Changes. Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners
- BS-EN-ISO-3506-3 - Mechanical properties of corrosion-resistant stainless steel fasteners
- BS-EN-ISO-3506-4 - Mechanical properties of corrosion-resistant stainless steel fasteners
- BS-EN-ISO-4014 - Fasteners. Hexagon head bolts. Product grades A and B
- BS-EN-ISO-4014-TC - Tracked Changes. Fasteners. Hexagon head bolts. Product grades A and B
- BS-EN-ISO-4015 - Fasteners. Hexagon head bolts with reduced shank (shank diameter pitch diameter). Product grade B
- BS-EN-ISO-4016 - Fasteners. Hexagon head bolts. Product grade C
- BS-EN-ISO-4017 - Fasteners. Hexagon head screws. Product grades A and B
- BS-EN-ISO-4017-TC - Tracked Changes. Fasteners. Hexagon head screws. Product grades A and B
- BS-EN-ISO-4018 - Fasteners. Hexagon head screws. Product grade C
- BS-EN-ISO-4026 - Hexagon socket set screws with flat point
- BS-EN-ISO-4027 - Hexagon socket set screws with cone point
- BS-EN-ISO-4028 - Hexagon socket set screws with dog point
- BS-EN-ISO-4029 - Hexagon socket set screws with cup point
- BS-EN-ISO-4759-1 - Tolerances for fasteners. Bolts, screws, studs and nuts. Product grades A, B and C
- BS-EN-ISO-4762 - Hexagon socket head cap screws
- BS-EN-ISO-4766 - Slotted set screws with flat point
- BS-EN-ISO-7045 - Pan head screws with type H or type Z cross recess. Product grade A
- BS-EN-ISO-7046-1 - Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A
- BS-EN-ISO-7046-2 - Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A
- BS-EN-ISO-7047 - Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A
- BS-EN-ISO-7049 - Cross-recessed pan head tapping screws
- BS-EN-ISO-7050 - Cross-recessed countersunk (flat) head tapping screws
- BS-EN-ISO-7051 - Cross-recessed raised countersunk (oval) head tapping screws
- BS-EN-ISO-7053 - Fasteners. Hexagon washer head tapping screws
- BS-EN-ISO-7380 - Hexagon socket button head screws.
- BS-EN-ISO-7380-1 - Fasteners. Button head screws with reduced loadability
- BS-EN-ISO-7380-1-TC - Tracked Changes. Fasteners. Button head screws with reduced loadability
- BS-EN-ISO-7380-2 - Fasteners. Button head screws with reduced loadability
- BS-EN-ISO-7380-2-TC - Tracked Changes. Fasteners. Button head screws with reduced loadability
- BS-EN-ISO-8676 - Fasteners. Hexagon head screws, with fine pitch thread. Product grades A and B
- BS-EN-ISO-8676-TC - Tracked Changes. Fasteners. Hexagon head screws, with fine pitch thread. Product grades A and B
- BS-EN-ISO-8765 - Fasteners. Hexagon head bolts, with fine pitch thread. Product grades A and B
- BS-EN-ISO-888 - Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
- BS-EN-ISO-898-1 - Mechanical properties of fasteners made of carbon steel and alloy steel
- BS-EN-ISO-898-5 - Mechanical properties of fasteners made of carbon steel and alloy steel
- BS-ISO-10509 - Hexagon flange head tapping screws
- BS-ISO-15072 - Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
- BS-ISO-4162 - Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
- BS-ISO-885 - General purpose bolts and screws. Metric series. Radii under the head
- BS-ISO-888 - Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
- BS-ISO-898-1 - Part 1: Bolts, Screws & Studs, Mechanical Properties of Fasteners Made of Carbon Steel
- BS-ISO-8992 - Fasteners. General requirements for bolts, screws, studs and nuts
- BS-MA-82 - Specification for shipbuilding - oil and water drain screws
- DD-CEN-1992-4-2 - Design of fastenings for use in concrete
ISO:
- ISO-10509 - Hexagon flange head tapping screws
- ISO-10510 - Tapping screw and washer assemblies with plain washers
- ISO-10642 - Fasteners - Hexagon socket countersunk head screws with reduced loadability
- ISO-10642-AM1 - Hexagon socket countersunk head screws - Amendment 1
- ISO-10664 - Hexalobular internal driving feature for bolts and screws
- ISO-10666 - Drilling screws with tapping screw thread -- Mechanical and functional properties
- ISO-1207 - Slotted cheese head screws - Product grade A
- ISO-12474 - Hexagon socket head cap screws with metric fine pitch thread
- ISO-13918 - Welding - Studs and ceramic ferrules for arc stud welding
- ISO-13918-AM1 - - Amendment 1
- ISO-14579 - Hexalobular socket head cap screws
- ISO-14580 - Hexalobular socket cheese head screws
- ISO-14581 - Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability
- ISO-14582 - Fasteners - Hexalobular socket countersunk head screws, high head
- ISO-14583 - Hexalobular socket pan head screws
- ISO-14584 - Hexalobular socket raised countersunk head screws
- ISO-14585 - Hexalobular socket pan head tapping screws
- ISO-14586 - Hexalobular socket countersunk head tapping screws
- ISO-14587 - Hexalobular socket raised countersunk (oval) head tapping screws
- ISO-1479 - Hexagon head tapping screws
- ISO-1481 - Slotted pan head tapping screws
- ISO-1482 - Slotted countersunk (flat) head tapping screws
- ISO-1483 - Slotted raised countersunk (oval) head tapping screws
- ISO-15065 - Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
- ISO-15071 - Hexagon bolts with flange - Small series - Product grade A
- ISO-15072 - Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A
- ISO-15480 - Fasteners - Hexagon washer head drilling screws with tapping screw thread
- ISO-15481 - Cross recessed pan head drilling screws with tapping screw thread
- ISO-15482 - Cross recessed countersunk head drilling screws with tapping screw thread
- ISO-15483 - Cross recessed raised countersunk head drilling screws with tapping screw thread
- ISO-1580 - Slotted pan head screws - Product grade A
- ISO-2009 - Slotted countersunk flat head screws - Product grade A
- ISO-2010 - Slotted raised countersunk head screws - Product grade A
- ISO-21269 - Hexagon socket head cap screws with metric fine pitch thread
- ISO-225 - Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions
- ISO-2342 - Slotted headless screws with shank
- ISO-23429 - Gauging of hexagon sockets
- ISO-2702 - Fasteners - Heat treated tapping screws - Mechanical and physical properties
- ISO-3506-1 - Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes
- ISO-3506-3 - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress
- ISO-3506-4 - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws
- ISO-4014 - Fasteners - Hexagon head bolts - Product grades A and B
- ISO-4015 - Fasteners - Hexagon head bolts with reduced shank (shank diameter pitch diameter) - Product grade B
- ISO-4016 - Fasteners - Hexagon head bolts - Product grade C
- ISO-4017 - Fasteners - Hexagon head screws - Product grades A and B
- ISO-4018 - Fasteners - Hexagon head screws - Product grade C
- ISO-4026 - Hexagon socket set screws with flat point
- ISO-4027 - Hexagon socket set screws with cone point
- ISO-4028 - Hexagon socket set screws with dog point
- ISO-4029 - Hexagon socket set screws with cup point
- ISO-4162 - Hexagon bolts with flange - Small series - Product grade A with driving feature of product grade B
- ISO-4757 - Cross recesses for screws
- ISO-4759-1 - Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
- ISO-4762 - Hexagon socket head cap screws
- ISO-4766 - Slotted set screws with flat point
- ISO-6157-1 - Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements
- ISO-6157-3 - Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements
- ISO-7045 - Pan head screws with type H or type Z cross recess - Product grade A
- ISO-7046-1 - Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8
- ISO-7046-2 - Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
- ISO-7047 - Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A
- ISO-7048 - Cross-recessed cheese head screws
- ISO-7049 - Cross-recessed pan head tapping screws
- ISO-7050 - Cross-recessed countersunk (flat) head tapping screws
- ISO-7051 - Cross-recessed raised countersunk (oval) head tapping screws
- ISO-7053 - Fasteners - Hexagon washer head tapping screws
- ISO-7085 - Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
- ISO-7378 - Fasteners - Bolts, screws and studs - Split pin holes and wire holes
- ISO-7379 - Hexagon socket head shoulder screws
- ISO-7380 - Hexagon socket button head screws
- ISO-7380-1 - Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws
- ISO-7380-2 - Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar
- ISO-7411 - Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) - Product grade C - Property classes 8.8 and 10.9
- ISO-7412 - Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) - Product grade C - Property classes 8.8 and 10.9
- ISO-7434 - Slotted set screws with cone point
- ISO-7435 - Slotted set screws with long dog point
- ISO-7436 - Slotted set screws with cup point
- ISO-7721 - Countersunk head screws - Head configuration and gauging
- ISO-7721-2 - Countersunk flat head screws - Part 2: Penetration depth of cross recesses
- ISO-8676 - Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B
- ISO-8678 - Cup head square neck bolts with small head and short neck - Product grade B
- ISO-8765 - Fasteners - Hexagon head bolts, with fine pitch thread - Product grades A and B
- ISO-8839 - Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals
- ISO-885 - General purpose bolts and screws - Metric series - Radii under the head
- ISO-888 - Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths
- ISO-898-1 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
- ISO-898-5 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread
- ISO-898-7 - Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
- ISO-8992 - Fasteners - General requirements for bolts, screws, studs and nuts
Other SDOs:
- ASME-B18.10 - Track Bolts and Nuts
- ASME-B18.11 - Miniature Screws
- ASME-B18.13 - Screw and Washer Assemblies - SEMS (Inch Series)
- ASME-B18.13.1M - Screw and Washer Assemblies SEMS (Metric Series)
- ASME-B18.2.1 - Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)
- ASME-B18.2.3.10M - Square Head Bolts (Metric Series)
- ASME-B18.2.3.1M - Metric Hex Cap Screws
- ASME-B18.2.3.2M - Metric Formed Hex Screws
- ASME-B18.2.3.3M - Metric Heavy Hex Screws (Metric)
- ASME-B18.2.3.5M - Metric Hex Bolts
- ASME-B18.2.3.6M - Metric Heavy Hex Bolts
- ASME-B18.2.3.7M - Metric Heavy Hex Structural Bolts
- ASME-B18.2.3.8M - Metric Hex Lag Screws
- ASME-B18.2.3.9M - Metric Heavy Hex Flange Screws
- ASME-B18.2.5M - Metric 12-Point Flange Head Screws
- ASME-B18.2.7.1M - Metric 12-Spline Flange Screws
- ASME-B18.2.8 - Clearance Holes for Bolts Screws and Studs
- ASME-B18.2.9 - Straightness Gage and Gaging for Bolts and Screws
- ASME-B18.3 - Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)
- ASME-B18.31.1M - Metric Continuous and Double-End Studs
- ASME-B18.31.2 - Continuous Thread Stud, Double-End Stud, and Flange Bolting Stud (Stud Bolt) (Inch Series)
- ASME-B18.31.5 - Bent Bolts (Inch Series)
- ASME-B18.3.1M - Socket Head Cap Screws (Metric Series)
- ASME-B18.3.3M - Hexagon Socket Head Shoulder Screws (Metric Series)
- ASME-B18.3.4M - Hexagon Socket Button Head Cap Screws (Metric Series)
- ASME-B18.35M - Screw, Hexagon Socket Flat Countersunk Head Cap (Metric Series)
- ASME-B18.3.5M - Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series)
- ASME-B18.3.6M - Socket Set Screws (Metric Series)
- ASME-B18.5 - Round Head Bolts (Inch Series)
- ASME-B18.5.2.1M - Metric Round Head Short Square Neck Bolts - Withdrawn
- ASME-B18.5.2.2M - Metric Round Head Square Neck Bolts
- ASME-B18.5.2.3M - Round Head Square Neck Bolts with Large Head (Metric Series)
- ASME-B18.6.1 - Wood Screws (Inch Series)
- ASME-B18.6.2 - Slotted Head Cap Screws, Square Head Set Screws and Slotted Headless Set Screws: Inch Series
- ASME-B18.6.3 - Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series)
- ASME-B18.6.4 - Thread Forming And Thread Cutting Tapping Screws And Metallic Drive Screws (Inch Series)
- ASME-B18.6.5M - Metric Thread Forming and Thread Cutting Tapping Screws
- ASME-B18.6.7M - Metric Machine Screws
- ASME-B18.6.8 - Thumb Screws and Wing Screws (Inch Series)
- ASME-B18.9 - Plow Bolts
- DIN-267-27 - Part 27: Steel Screws, Bolts & Studs With Adhesive Coating, Technical Specifications
- DIN-267-28 - Part 28: Steel Screws, Bolts & Studs With Locking Coating, Technical Specifications
- DIN-34800 - Bolts and screws with external hexalobular driving feature with small flange
- DIN-34821 - Cheese Head Screws With 12 Point Socket
- DIN-34822 - Cheese Head Screws With Flange, With 12 Point Socket
- DIN-34823 - Raised Countersunk Head Screws With 12 Point Socket
- DIN-34824 - 12 Point Socket for Bolts & Screws
- DIN-34827 - Hexalobular socket set screws
- DIN-580 - Lifting Eye Bolts
- DIN-6900-5 - Part 5: Assemblies With Coarse Threaded Screws & Captive Conical Spring Washer, Screw
- DIN-6912 - Hexagon Socket Head Cap Screws With Centre, With Low Head
- DIN-6928 - Hexagon Head Tapping Screws With Collar
- DIN-7500-1 - Part 1: Technical Specifications for Case Hardened & Tempered Screws, Thread Rolling S
- DIN-787 - T-Head Bolts
- DIN-7984 - Hexagon Socket Head Cap Screws With Low Head
- DIN-976-1 - Fasteners - Stud bolts - Part 1: Metric thread
- DIN-EN-14219 - Hexagon Bolts With Flange With Metric Fine Pitch Thread, Small Series
- DIN-EN-14399-1 - High-strength structural bolting assemblies for preloading - Part 1: General requirements; German version EN 14399-1:2015
- DIN-EN-14399-2 - High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading; German version EN 14399-2:2015
- DIN-EN-14399-3 - High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies; German version EN 14399-3:2015
- DIN-EN-14399-4 - High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies; German version EN 14399-4:2015
- DIN-EN-14831 - Fasteners - Tightening Performance, Torque/Angle Simplified Test Method
- DIN-EN-1515-3 - Part 3: Classification of Bolt Materials for Steel Flanges, Class Designated, Flanges
- DIN-EN-ISO-10642 - Hexagon socket countersunk head screws (ISO 10642:2004 + Amd 1:2012)
- DIN-EN-ISO-10664 - Hexalobular internal driving feature for bolts and screws
- DIN-EN-ISO-14579 - Hexalobular Socket Head Cap Screws
- DIN-EN-ISO-14580 - Hexalobular Socket Cheese Head Screws
- DIN-EN-ISO-14583 - Hexalobular Socket Pan Head Screws
- DIN-EN-ISO-14585 - Hexalobular Socket Pan Head Tapping Screws
- DIN-EN-ISO-14586 - Hexalobular Socket Countersunk Head Tapping Screws
- DIN-EN-ISO-14587 - Hexalobular Socket Raised Countersunk (Oval) Head Tapping Screws
- DIN-EN-ISO-15065 - Countersinks for Countersunk Head Screws With Head Configuration in Accordance With Is
- DIN-EN-ISO-2342 - Slotted Headless Screws With Shank
- DIN-EN-ISO-23429 - Gauging of Hexagon Sockets
- DIN-EN-ISO-3506-4 - Part 4: Tapping Screws, Mechanical Properties of Corrosion-Resistant Stainless-Steel F
- DIN-EN-ISO-4026 - Hexagon Socket Set Screws With Flat Point
- DIN-EN-ISO-4027 - Hexagon Socket Set Screws With Cone Point
- DIN-EN-ISO-4029 - Hexagon Socket Set Screws With Cup Point
- DIN-EN-ISO-7380 - Hexagon Socket Button Head Screws
- DIN-EN-ISO-888 - Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012); German version EN ISO 888:2018
- DIN-ISO-8992 - Fasteners, General Requirements for Bolts, Screws, Studs & Nuts
- EN-14219 - Hexagon Bolts With Flange With Metric Fine Pitch Thread, Small Series
- EN-14399-3 - High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
- EN-14399-4 - High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
- EN-14831 - Fasteners - Tightening Performance, Torque/Angle Simplified Test Method
- EN-1515-3 - Part 3: Classification of Bolt Materials for Steel Flanges, Class Designated, Flanges
- EN-1515-4 - Part 4: Selection of Bolting for Equipment Subject To the Pressure Equipment Directive
- EN-1662 - Hexagon Bolts With Flange - Small Series
- EN-24015 - Hexagon Head Bolts - Product Grade B - Reduced Shank (Shankdiameter = Pitch Diameter)
- EN-24766 - Slotted Set Screws With Flat Point
- EN-27434 - Slotted Set Screws With Cone Point
- EN-27721 - Countersunk Head Screws, Head Configuration & Gauging
- EN-ISO-10510 - Tapping screw and washer assemblies with plain washers
- EN-ISO-10642 - Hexagon Socket Countersunk Head Screws
- EN-ISO-10644 - Screw & Washer Assemblies Made of Steel With Plain Washers - Washer Hardness Classes 2
- EN-ISO-10664 - Hexalobular internal driving feature for bolts and screws
- EN-ISO-10666 - Drilling Screws With Tapping Screw Thread, Mechanical & Functional Properties
- EN-ISO-1207 - Slotted cheese head screws - Product grade A
- EN-ISO-13918 - Welding - Studs & Ceramic Ferrules for Arc Stud Welding
- EN-ISO-14579 - Hexalobular socket head cap screws
- EN-ISO-14580 - Hexalobular socket cheese head screws
- EN-ISO-14581 - Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
- EN-ISO-14582 - Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)
- EN-ISO-14583 - Hexalobular socket pan head screws
- EN-ISO-14584 - Hexalobular socket raised countersunk head screws
- EN-ISO-14585 - Hexalobular socket pan head tapping screws (ISO 14585:2011)
- EN-ISO-14586 - Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
- EN-ISO-14587 - Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
- EN-ISO-1479 - Hexagon head tapping screws
- EN-ISO-1481 - Slotted pan head tapping screws
- EN-ISO-1482 - Slotted countersunk (flat) head tapping screws
- EN-ISO-1483 - Slotted raised countersunk (oval) head tapping screws
- EN-ISO-15065 - Countersinks for Countersunk Head Screws With Head Configuration in Accordance With Is
- EN-ISO-15480 - Hexagon Washer Head Drilling Screws With Tapping Screw Thread
- EN-ISO-15481 - Cross Recessed Pan Head Drilling Screws With Tapping Screw Thread
- EN-ISO-15482 - Cross Recessed Countersunk Head Drilling Screws With Tappingscrew Thread
- EN-ISO-1580 - Slotted pan head screws - Product grade A
- EN-ISO-2009 - Slotted countersunk flat head screws - Product grade A
- EN-ISO-2010 - Slotted raised countersunk head screws - Product grade A
- EN-ISO-21269 - Hexagon Socket Head Cap Screws With Metric Fine Pitch Thread
- EN-ISO-225 - Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions
- EN-ISO-3506-1 - Part 1: Bolts, Screws & Studs, Mechanical Properties of CORROSSION-Resistant Stainless
- EN-ISO-3506-3 - Part 3: Set Screws & Similar Fasteners Not Under Tensile Stress, Mechanical Properties
- EN-ISO-3506-4 - Part 4: Tapping Screws, Mechanical Properties of Corrosion-Resistant Stainless-Steel F
- EN-ISO-4014 - Hexagon head bolts - Product grades A and B
- EN-ISO-4017 - Fasteners - Hexagon head screws - Product grades A and B
- EN-ISO-4018 - Hexagon head screws - Product grade C
- EN-ISO-4766 - Slotted set screws with flat point
- EN-ISO-7045 - Pan head screws with type H or type Z cross recess - Product grade A
- EN-ISO-7046-1 - Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8
- EN-ISO-7046-2 - Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
- EN-ISO-7047 - Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A
- EN-ISO-7048 - Cross-recessed cheese head screws
- EN-ISO-7049 - Cross-recessed pan head tapping screws
- EN-ISO-7050 - Cross-recessed countersunk (flat) head tapping screws
- EN-ISO-7051 - Cross-recessed raised countersunk (oval) head tapping screws
- EN-ISO-7053 - Hexagon washer head tapping screws
- EN-ISO-7380 - Hexagon Socket Button Head Screws
- EN-ISO-7380-1 - Button head screws - Part 1: Hexagon socket button head screws
- EN-ISO-7380-2 - Button head screws - Part 2: Hexagon socket button head screws with collar
- EN-ISO-8676 - Hexagon head screws with metric fine pitch thread - Product grades A and B
- EN-ISO-8765 - Hexagon head bolts with metric fine pitch thread - Product grades A and B
- EN-ISO-888 - Bolts, screw and stods-Nominal lengths and thread lengths for general purpose bolts
- EN-ISO-898-1 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
- EN-ISO-898-5 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
- JIS-A-1159 - Standard Specification for Stainless Steel Socket Head Cap Screws
- JIS-A-5542 - Bolts of Turnbuckle for Building
- JIS-B-1007 - Tapping screws thread
- JIS-B-1015 - Hexalobular internal driving feature for bolts and screws
- JIS-B-1021 - Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
- JIS-B-1041 - Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements
- JIS-B-1043 - Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements
- JIS-B-1051 - Mechanical properties of fasteners made of carbon steel and alloy steel -- Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
- JIS-B-1053 - Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses
- JIS-B-1054-1 - Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
- JIS-B-1054-3 - Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress
- JIS-B-1057 - Mechanical properties of non-ferrous metal fasteners
- JIS-B-1058 - Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
- JIS-B-1059 - Drilling screws with tapping screw thread -- Mechanical and functional properties
- JIS-B-1060 - Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
- JIS-B-1099 - Fasteners -- General requirements for bolts, screws, studs and nuts
- JIS-B-1107 - Hexalobular Socket Pan Head Screws
- JIS-B-1124 - Drilling screws with tapping screw thread
- JIS-B-1125 - Self drilling tapping screws
- JIS-B-1126 - Hexagon washer head tapping screws
- JIS-B-1127 - Hexagon flange head tapping screws
- JIS-B-1128 - Hexalobular socket head tapping screws
- JIS-B-1129 - Tapping screw washer assemblies with plain washers
- JIS-B-1136 - Hexalobular socket head cap screws
- JIS-B-1166 - T-Slot bolts
- JIS-B-1168 - Eyebolts
- JIS-B-1171 - Cup head square neck bolts
- JIS-B-1174 - Hexagon socket button head screws
- JIS-B-1176 - Hexagon socket head cap screws
- JIS-B-1180 - Hexagon head bolts and hexagon head screws
- JIS-B-1182 - Square head bolts
- JIS-B-1189 - Hexagon bolts with flange
- JIS-B-1192 - Ball screws
- JIS-B-1194 - Hexagon socket countersunk head screws
- JIS-B-1217-AM1 - Bolting for use with pipe flanges (Amendment 1)
- JIS-B-7141 - Microscopes -- Screw threads for objectives and related nosepieces
- JIS-E-1107 - Steel bolts and nuts for fish-plates and fastenings
- SIS-CEN-1992-4-2 - Design of fastenings for use in concrete - Part 4-2: Headed Fasteners
- SIS-CEN/TS-1992-4-2 - Design of fastenings for use in concrete - Part 4-2: Headed Fasteners
- SIS-ISO/TS-13399-2 - Cutting tool data representation and exchange - Part 2: Reference dictionary for cutting items (ISO/TS 13399-2:2021, IDT)
- SS-1523 - Fasteners - Tapping screws with ST-threads - Holediameters
- SS-2265 - Mechanical properties of fasteners - Bolts, screws and studs with ISO inch screwthreads (UNC and UNF threads)
- SS-3392 - Tapping screws - Determination of strength and assembly properties
- SS-3607 - Bolts and screws with captive plain washer - ISO metric screw threads, with coarse pitch - General requirements
- SS-3608 - Screws with captive plain washer ST-threads - General requirements
- SS-3655 - Fasteners - Friction properties for bolts, screws and nuts with ISO metric screw threads - Test method
- SS-EN-13616 - Overfill prevention devices for static tanks for liquid petroleum fuels
- SS-EN-13871 - Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
- SS-EN-14219 - Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified)
- SS-EN-14399-10 - High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
- SS-EN-14399-2 - High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
- SS-EN-14399-3 - High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
- SS-EN-14399-4 - High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
- SS-EN-14399-7 - High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
- SS-EN-14399-8 - High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
- SS-EN-14399-9 - High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
- SS-EN-14831 - Fasteners - Tightening performance - Torque/Angle simplified test method
- SS-EN-1515-3 - Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
- SS-EN-1515-4 - Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
- SS-EN-1662 - Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified)
- SS-EN-1665 - Hexagon bolts with flange - Heavy series
- SS-EN-20225 - Fasteners - Bolts, screws, studs and nuts - Symbols and designation of dimensions
- SS-EN-20273 - Fasteners - Clearance holes for bolts and screws
- SS-EN-20898-1 - Mechanical properties of fasteners - Part 1: Bolts, screws and studs
- SS-EN-20898-7 - Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
- SS-EN-24014 - Fasteners - Hexagon head bolts - Product grades Aand B
- SS-EN-24015 - Fasteners - Hexagon head bolts - Product grade B - Reduced shank (Shank diameter, pitch diameter)
- SS-EN-24016 - Fasteners - Hexagon head bolts - Product grade C
- SS-EN-24017 - Fasteners - Hexagon head screws - Product grades A and B
- SS-EN-24018 - Fasteners - Hexagon head screws - Product grade C
- SS-EN-24766 - Slotted set screws with flat point (ISO 4766:1983)
- SS-EN-26157-1 - Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
- SS-EN-26157-3 - Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
- SS-EN-27434 - Slotted set screws with cone point (ISO 7434:1983)
- SS-EN-27435 - Slotted set screws with long dog point (ISO 7435:1983)
- SS-EN-27436 - Slotted set screws with cup point (ISO 7436:1983)
- SS-EN-27721 - F"stelement - S"nkhuvuden p+ skruvar - Form och m"tning
- SS-EN-28676 - Fasteners - Hexagon head screws with fine pitch thread - Product grades A and B
- SS-EN-28765 - Fasteners - Hexagon head bolts with fine pitch thread - Product grades A and B
- SS-EN-28839 - Fasteners - Mechanical properties of fasteners - Bolts, screws, studs and nuts made from non-ferrous metals
- SS-EN-ISO-10510 - Tapping screw and washer assemblies with plain washers (ISO 10510:2011)
- SS-EN-ISO-10642 - Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)
- SS-EN-ISO-10642-AM1 - Hexagon socket countersunk head screws (ISO 10642:2004/Amd 1:2012)
- SS-EN-ISO-10644 - Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
- SS-EN-ISO-10664 - Hexalobular internal driving feature for bolts and screws (ISO 10664:2014)
- SS-EN-ISO-10666 - Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999)
- SS-EN-ISO-10673 - Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009)
- SS-EN-ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2018)
- SS-EN-ISO-11402 - Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)
- SS-EN-ISO-1207 - Slotted cheese head screws - Product grade A (ISO 1207:2011)
- SS-EN-ISO-12474 - Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
- SS-EN-ISO-13918 - Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017)
- SS-EN-ISO-13918-AM1 - Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
- SS-EN-ISO-14579 - Hexalobular socket head cap screws (ISO 14579:2011)
- SS-EN-ISO-14580 - Hexalobular socket cheese head screws (ISO 14580:2011)
- SS-EN-ISO-14581 - Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)
- SS-EN-ISO-14582 - Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)
- SS-EN-ISO-14583 - Hexalobular socket pan head screws (ISO 14583:2011)
- SS-EN-ISO-14584 - Hexalobular socket raised countersunk head screws (ISO 14584:2011)
- SS-EN-ISO-14585 - Hexalobular socket pan head tapping screws (ISO 14585:2011)
- SS-EN-ISO-14586 - Hexalobular socket countersunk head tapping screws (ISO 14586:2011)
- SS-EN-ISO-14587 - Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011)
- SS-EN-ISO-1478 - Tapping screws thread (ISO 1478:1999)
- SS-EN-ISO-1479 - Hexagon head tapping screws (ISO 1479:2011)
- SS-EN-ISO-1481 - Slotted pan head tapping screws (ISO 1481:2011)
- SS-EN-ISO-1482 - Slotted countersunk (flat) head tapping screws (ISO 1482:2011)
- SS-EN-ISO-1483 - Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
- SS-EN-ISO-15065 - Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)
- SS-EN-ISO-15330 - Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)
- SS-EN-ISO-15480 - Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
- SS-EN-ISO-15481 - Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
- SS-EN-ISO-15482 - Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)
- SS-EN-ISO-15483 - Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)
- SS-EN-ISO-1580 - Slotted pan head screws - Product grade A (ISO 1580:2011)
- SS-EN-ISO-2009 - Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
- SS-EN-ISO-2010 - Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
- SS-EN-ISO-21269 - Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004)
- SS-EN-ISO-225 - Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010)
- SS-EN-ISO-2342 - Slotted headless screws with shank (ISO 2342:2003)
- SS-EN-ISO-23429 - Gauging of hexagon sockets (ISO 23429:2004)
- SS-EN-ISO-2702 - Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)
- SS-EN-ISO-3506-1 - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
- SS-EN-ISO-3506-3 - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
- SS-EN-ISO-3506-4 - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009)
- SS-EN-ISO-4014 - Fasteners - Hexagon head bolts - Product grades A and B (ISO 4014:2022)
- SS-EN-ISO-4015 - Fasteners - Hexagon head bolts with reduced shank (shank diameter pitch diameter) - Product grade B (ISO 4015:2022)
- SS-EN-ISO-4016 - Fasteners - Hexagon head bolts - Product grade C (ISO 4016:2022)
- SS-EN-ISO-4017 - Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2022)
- SS-EN-ISO-4018 - Fasteners - Hexagon head screws - Product grade C (ISO 4018:2022)
- SS-EN-ISO-4026 - Hexagon socket set screws with flat point (ISO 4026:2003)
- SS-EN-ISO-4027 - Hexagon socket set screws with cone point (ISO 4027:2003)
- SS-EN-ISO-4028 - Hexagon socket set screws with dog point (ISO 4028:2003)
- SS-EN-ISO-4029 - Hexagon socket set screws with cup point (ISO 4029:2003)
- SS-EN-ISO-4042 - Fasteners - Electroplated coating systems (ISO 4042:2022)
- SS-EN-ISO-4753 - Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011)
- SS-EN-ISO-4757 - Cross recesses for screws (ISO 4757:1983)
- SS-EN-ISO-4759-1 - Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)
- SS-EN-ISO-4762 - Hexagon socket head cap screws (ISO 4762:2004)
- SS-EN-ISO-4766 - Slotted set screws with flat point (ISO 4766:2011)
- SS-EN-ISO-7045 - Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
- SS-EN-ISO-7046-1 - Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)
- SS-EN-ISO-7046-2 - Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
- SS-EN-ISO-7047 - Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
- SS-EN-ISO-7048 - Cross-recessed cheese head screws (ISO 7048:2011)
- SS-EN-ISO-7049 - Cross-recessed pan head tapping screws (ISO 7049:2011)
- SS-EN-ISO-7050 - Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011)
- SS-EN-ISO-7051 - Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)
- SS-EN-ISO-7053 - Fasteners - Hexagon washer head tapping screws (ISO 7053:2019)
- SS-EN-ISO-7380 - Hexagon socket button head screws (ISO 7380:2004)
- SS-EN-ISO-7380-1 - Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)
- SS-EN-ISO-7380-2 - Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)
- SS-EN-ISO-7721-2 - Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
- SS-EN-ISO-8676 - Fasteners - Hexagon head screws, with fine pitch thread - Product grades A and B (ISO 8676:2022)
- SS-EN-ISO-8765 - Fasteners - Hexagon head bolts, with fine pitch thread - Product grades A and B (ISO 8765:2022)
- SS-EN-ISO-888 - Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
- SS-EN-ISO-898-1 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
- SS-EN-ISO-898-5 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
- SS-ISO-10509 - Hexagon flange head tapping screws (ISO 10509:2012, IDT)
- SS-ISO-1891 - Fasteners - Terminology (ISO 1891:2009, IDT)
- SS-ISO-225 - Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions
- SS-ISO-272 - Fasteners - Hexagon products - Widths across flats
- SS-ISO-273 - Fasteners - Clearance holes for bolts and screws
- SS-ISO-3506 - Corrosion-resistant stainless steel fasteners - Specifications
- SS-ISO-3508 - Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
- SS-ISO-3800 - Threaded fasteners - Axial load fatigue testing -Test methods and evaluation of results
- SS-ISO-4014 - Hexagon head bolts - Product grades A and B
- SS-ISO-4016 - Hexagon head bolts - Product grade C
- SS-ISO-4017 - Hexagon head screws - Product grades A and B
- SS-ISO-4018 - Hexagon head screws - Product grade C
- SS-ISO-4753 - Fasteners - Ends of parts with external metric ISO thread
- SS-ISO-4755 - Fasteners - Thread undercuts for external metric ISO threads
- SS-ISO-4759-1 - Tolerances for fasteners - Part 1: Bolts, screws and nuts with thread diameters from 1,6 up to and including 150 mm and product grades A, B and C
- SS-ISO-4762 - Hexagon socket head cap screws - Product grade A
- SS-ISO-4766 - Slotted set screws with flat point
- SS-ISO-5713 - Equipment for working the soil - Fixing bolts forsoil working elements
- SS-ISO-6157-1 - Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements
- SS-ISO-6157-3 - Fasteners - Surface discontinuities - Part 3: Bolts, screws and studs for special requirements
- SS-ISO-6696 - Cycles - Screw threads used in bottom bracket assemblies
- SS-ISO-7434 - Slotted set screws with cone point
- SS-ISO-7435 - Slotted set screws with long dog point
- SS-ISO-7436 - Slotted set screws with cup point
- SS-ISO-7721 - Countersunk head screws - Head configuration and gauging
- SS-ISO-8488 - Cycles - Screw threads used to assemble head fittings on bicycle forks
- SS-ISO-8839 - Mechanical properties of fasteners - Bolts, screws, studs and nuts made from non-ferrous metals
- SS-ISO-885 - General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000, IDT)
- SS-ISO-888 - Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012, IDT)
- SS-ISO-898-1 - Mechanical properties of fasteners Part 1: Bolts, screws and studs
- SS-ISO-898-5 - Mechanical properties of fasteners - Part 5: Set screws and similar threaded fasteners not under tensile stresses
- UNE-EN-ISO-10664 - Hexalobular internal driving feature for bolts and screws
- UNE-EN-ISO-10683 - Fasteners - Non-electrolytically applied zinc flake coatings
- UNE-EN-ISO-14581 - Fasteners - Hexalobular socket countersunk flat head screws
- UNE-EN-ISO-7046-2 - Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)