Document Center List of Standards on Pins, Nails
ICS Code 21.060.50
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A65 - Standard Specification for Steel Track Spikes (Withdrawn 2022)
- ASTM-C514 - Standard Specification for Nails for the Application of Gypsum Board
- ASTM-F1575 - Standard Test Method for Determining Bending Yield Moment of Nails
- ASTM-F547 - Standard Terminology of Nails for Use with Wood and Wood-Base Materials
- ASTM-F680 - Standard Test Methods for Nails
BSI:
- BS-1202-1 - Specification for nails
- BS-1202-2 - Specification for nails. Copper nails
- BS-1202-3 - Specification for nails. Aluminium nails
- BS-1574 - Specification for split pins (inch series)
- BS-1804-1 - Specification for parallel steel dowel pins
- BS-1804-2 - Specification for parallel steel dowel pins
- BS-1804-3 - Specification for parallel steel dowel pins
- BS-3537 - Specification for gudgeon pins up to 200 mm diameter
- BS-46-3 - Keys and keyways and taper pins
- BS-EN-10230-1 - Steel wire nails
- BS-EN-22339 - Taper pins, unhardened
- BS-EN-28735 - Parallel Pins With Internal Thread, Hardened
- BS-EN-28737 - Taper pins with external thread, unhardened
- BS-EN-28739 - Grooved Pins, Full-Length Parallel Grooved, With Point
- BS-EN-28740 - Grooved Pins, Full-Length Parallel Grooved, With Chamfer
- BS-EN-28741 - Grooved Pins, Half Length Reverse Taper Grooved
- BS-EN-28742 - Grooved Pins, Third-Length Centre Grooved
- BS-EN-28743 - Grooved Pins, Half-Length Centre Grooved
- BS-EN-28744 - Grooved Pins, Full Length Taper Grooved
- BS-EN-28746 - Grooved Pins With Round Head
- BS-EN-28749 - Pins and grooved pins. Shear test
- BS-EN-ISO-1234 - Split pins
- BS-EN-ISO-12777-1 - Methods of test for pallet joints
- BS-EN-ISO-12777-2 - Methods of test for pallet joints
- BS-EN-ISO-13337 - Spring-type straight pins. Slotted, light duty
- BS-EN-ISO-2338 - Parallel pins of unhardened steel and austenitic stainless steel
- BS-EN-ISO-8733 - Parallel pins with internal thread, of unhardened steel or austenitic stainless steel
- BS-EN-ISO-8734 - Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)
- BS-EN-ISO-8735 - Parallel pins with internal thread, of hardened steel or martensitic stainless steel
- BS-EN-ISO-8739 - Grooved pins. Full-length parallel grooved, with pilot
- BS-EN-ISO-8740 - Grooved pins. Full-length parallel grooved, with chamfer
- BS-EN-ISO-8741 - Grooved pins. Half-length reverse-taper grooved
- BS-EN-ISO-8742 - Grooved pins. One-third-length centre grooved
- BS-EN-ISO-8744 - Grooved pins. Full-length taper grooved
- BS-EN-ISO-8745 - Grooved pins. Half-length taper grooved
- BS-EN-ISO-8746 - Grooved pins with round head
- BS-EN-ISO-8747 - Grooved pins with countersunk head
- BS-EN-ISO-8748 - Spring-type straight pins. Coiled, heavy duty
- BS-EN-ISO-8750 - Spring-type straight pins. Coiled, standard duty
- BS-EN-ISO-8751 - Spring-type straight pins. Coiled, light duty
- BS-EN-ISO-8752 - Spring-type straight pins. Slotted, heavy duty
ISO:
- ISO-1234 - Split pins
- ISO-13337 - Spring-type straight pins - Slotted, light duty
- ISO-2338 - Parallel pins, of unhardened steel and austenitic stainless steel
- ISO-2339 - Taper pins, unhardened
- ISO-2340 - Clevis pins without head
- ISO-2341 - Clevis pins with head
- ISO-8733 - Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
- ISO-8734 - Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)
- ISO-8735 - Parallel pins with internal thread, of hardened steel and martensitic stainless steel
- ISO-8736 - Taper pins with internal thread, unhardened
- ISO-8737 - Taper pins with external thread, unhardened
- ISO-8739 - Grooved pins - Full-length parallel grooved, with pilot
- ISO-8740 - Grooved pins - Full-length parallel grooved, with chamfer
- ISO-8741 - Grooved pins - Half-length reverse-taper grooved
- ISO-8742 - Grooved pins - One-third-length centre grooved
- ISO-8743 - Grooved pins - Half-length centre grooved
- ISO-8744 - Grooved pins - Full-length taper grooved
- ISO-8745 - Grooved pins - Half-length taper grooved
- ISO-8746 - Grooved pins with round head
- ISO-8747 - Grooved pins with countersunk head
- ISO-8748 - Spring-type straight pins - Coiled, heavy duty
- ISO-8749 - Pins and grooved pins - Shear test
- ISO-8750 - Spring-type straight pins - Coiled, standard duty
- ISO-8751 - Spring-type straight pins - Coiled, light duty
- ISO-8752 - Spring-type straight pins - Slotted, heavy duty
Other SDOs:
- ASME-B18.8.1 - Clevis Pins and Cotter Pins (Inch Series)
- ASME-B18.8.100M - Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Gound, and Grooved Pins (Metric Series)
- ASME-B18.8.2 - Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)
- ASME-B18.8.200M - Cotter Pins, Headless Clevis Pins, and Headed Clevis Pins (Metric Series)
- ASME-B18.8.3M - Spring Pins - Coiled Type (Metric Series)
- ASME-B18.8.4M - Spring Pins - Slotted (Metric Series)
- ASME-B18.8.5M - Machine Dowel Pins - Hardened Ground (Metric Series)
- ASME-B18.8.6M - Cotter Pins (Metric Series)
- ASME-B18.8.7M - Headless Clevis Pins (Metric Series)
- ASME-B18.8.8M - Headed Clevis Pins (Metric Series)
- ASME-B18.8.9M - Grooved Pins (Metric Series)
- DIN-EN-ISO-8748 - Spring-Type Straight Pins - Coiled, Heavy Duty
- DIN-EN-ISO-8750 - Spring-Type Straight Pins - Coiled, Standard Duty
- DIN-EN-ISO-8751 - Spring-Type Straight Pins - Coiled, Light Duty
- EN-10230-1 - Part 1: Loose Nails for General Applications, Steel Wire Nails
- EN-22339 - Taper Pins, Unhardened
- EN-28737 - Taper Pins With External Thread, Unhardened
- EN-28749 - Pins & Grooved Pins, Shear Test
- EN-ISO-1234 - Split Pins
- EN-ISO-12777-1 - Part 1: Determination of Bending Resistance of Pallet Nails, Other Dowel-Type Fastener
- EN-ISO-13337 - Spring-Type Straight Pins - Slotted, Light Duty
- EN-ISO-2338 - Parallel Pins, of Unhardened Steel & Austenitic Stainless Steel
- EN-ISO-8733 - Parallel Pins With Internal Thread, of Unhardened Steel & Austenitic Stainless Steel
- EN-ISO-8734 - Parallel Pins, of Hardened Steel or Martensitic Stainless Steel (Dowel Pins)
- EN-ISO-8735 - Parallel Pins With Internal Thread, of Hardended Steel & Martensitic Stainless Steel
- EN-ISO-8739 - Grooved Pins, Full-Length Parallel Grooved, With Pilot
- EN-ISO-8740 - Grooved Pins, Full-Length Parallel Grooved, With Chamfer
- EN-ISO-8742 - Grooved Pins, one-Third-Length Centre Grooved
- EN-ISO-8743 - Grooved Pins, Half-Length Centre Grooved
- EN-ISO-8744 - Grooved Pins, Full-Length Taper Grooved
- EN-ISO-8745 - Grooved Pins, Half-Length Taper Grooved
- EN-ISO-8748 - Spring-Type Straight Pins - Coiled, Heavy Duty
- EN-ISO-8750 - Spring-Type Straight Pins - Coiled, Standard Duty
- EN-ISO-8751 - Spring-Type Straight Pins - Coiled, Light Duty
- EN-ISO-8752 - Spring-Type Straight Pins - Slotted, Heavy Duty
- JIS-A-5508 - Nails
- JIS-B-1354 - Parallel pins
- JIS-B-1355 - Dowel pins (Parallel pins, hardened)
- JIS-B-1359 - Parallel pins with internal thread
- JIS-B-2808 - Spring pins
- SS-EN-10230-1 - Steel wire nails - Part 1: Loose nails for general applications
- SS-EN-22338 - Parallel pins, unhardened
- SS-EN-22339 - Taper pins, unhardened (ISO 2334:1986)
- SS-EN-22340 - Clevis pins without head (ISO 2340:1986)
- SS-EN-22341 - Clevis pins with head (ISO 2341:1986)
- SS-EN-28733 - Parallel pins with internal thread, unhardened (ISO 8733:1986)
- SS-EN-28734 - Parallel pins, hardened (Dowel pins) (ISO 8734:1987)
- SS-EN-28735 - Parallel pins with internal thread, hardened (ISO8735:1987)
- SS-EN-28736 - Taper pins with internal thread, unhardened (ISO 8736:1986)
- SS-EN-28737 - Taper pins with external thread, unhardened (ISO 8737:1986)
- SS-EN-28739 - Grooved pins - Full-length parallel grooved, withpilot (ISO 8739:1986)
- SS-EN-28740 - Grooved pins - Full length parallel grooved, withchamfer (ISO 8740:1986)
- SS-EN-28741 - Grooved pins - Half-length reverse taper grooved (ISO 8741:1986)
- SS-EN-28742 - Grooved pins - Third-length centre grooved (ISO 8742:1986)
- SS-EN-28743 - Grooved pins - Halv-length centre grooved (ISO 8743:1986)
- SS-EN-28744 - Grooved pins - Full-length taper grooved (ISO 8744:1986)
- SS-EN-28745 - Grooved pins - Half-lenght taper grooved (ISO 8745:1986)
- SS-EN-28746 - Grooved pins with round head (ISO 8746:1986)
- SS-EN-28747 - Grooved pins with countersunk head (ISO 8747)
- SS-EN-28748 - Spring-type straight pins - Coiled, heavy duty (ISO 8748:1987)
- SS-EN-28749 - Pins and grooved pins - Shear test (ISO 8749:1986)
- SS-EN-28750 - Spring-type straight pins - Coiled, standard duty(ISO 8750:1987)
- SS-EN-28751 - Spring-type straight pins - Coiled, light duty (ISO 8751:1987)
- SS-EN-28752 - Spring-type straight pins, slotted
- SS-EN-3150 - Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel718)
- SS-EN-3151 - Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
- SS-EN-ISO-1234 - Split pins (ISO 1234:1997)
- SS-EN-ISO-12777-1 - Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other doweltype fasteners and staples (ISO 12 777-1:1994)
- SS-EN-ISO-12777-1-AM1 - Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples - Amendment 1 (ISO 12777-1:1994/A1:2008)
- SS-EN-ISO-13337 - Spring-type straight pins - Slotted, light duty (ISO 13337:2009)
- SS-EN-ISO-2338 - Parallel pins, of unhardened steel and austeniticstainless steel (ISO 2338:1997)
- SS-EN-ISO-8733 - Parallel pins with internal thread, unhardened steel or austenitic stainless steel (ISO 8733:1997)
- SS-EN-ISO-8734 - Parallel pins of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)
- SS-EN-ISO-8735 - Parallel pins with internal thread, of hardened steel and martensitic stainless steel (ISO 8735:1997)
- SS-EN-ISO-8739 - Grooved pins - Full-lenght parallel grooved, withpilot (ISO 8739:1997)
- SS-EN-ISO-8740 - Grooved pins - Full-lenght parallel grooved, withchamfer (ISO/DIS 8740:1997)
- SS-EN-ISO-8741 - Grooved pins - Half-lenght reverse-taper grooved (ISO 8741:1997)
- SS-EN-ISO-8742 - Grooved pins - One-third-lenght centre grooved (ISO 8742:1997)
- SS-EN-ISO-8743 - Grooved pins - Half-lenght centre grooved (ISO 8743:1997)
- SS-EN-ISO-8744 - Grooved pins - Full-lenght taper grooved (ISO 8744:1997)
- SS-EN-ISO-8745 - Grooved pins - Half-lenght taper grooved (ISO 8745:1997)
- SS-EN-ISO-8746 - Grooved pins with round head (ISO 8746:1997)
- SS-EN-ISO-8747 - Grooved pins with countersunk head (ISO 8747:1997)
- SS-EN-ISO-8748 - Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007)
- SS-EN-ISO-8750 - Spring-type straight pins - Coiled, standard duty (ISO 8750:2007)
- SS-EN-ISO-8751 - Spring-type straight pins - Coiled, light duty (ISO 8751:2007)
- SS-EN-ISO-8752 - Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009)
- SS-ISO-1891 - Fasteners - Terminology (ISO 1891:2009, IDT)
- SS-ISO-2338 - Parallel pins, unhardened (ISO 2338:1986)
- SS-ISO-2339 - Taper pins, unhardened
- SS-ISO-2340 - Clevis pins without head
- SS-ISO-2341 - Clevis pins with head
- SS-ISO-8733 - Parallel pins with internal thread, unhardened
- SS-ISO-8734 - Parallel pins, hardened (Dowel pins)
- SS-ISO-8735 - Parallel pins with internal thread, hardened
- SS-ISO-8736 - Taper pins with internal thread, unhardened
- SS-ISO-8737 - Taper pins with external thread, unhardened
- SS-ISO-8739 - Grooved pins - Full-length parallel grooved, withpilot
- SS-ISO-8740 - Grooved pins - Full length parallel grooved, withchamfer
- SS-ISO-8741 - Grooved pins - Half-length reverse taper grooved
- SS-ISO-8742 - Grooved pins - Third-length centre grooved
- SS-ISO-8743 - Grooved pins - Half-length centre grooved
- SS-ISO-8744 - Grooved pins - Full-length taper grooved
- SS-ISO-8745 - Grooved pins - Half-length taper grooved
- SS-ISO-8746 - Grooved pins with round head
- SS-ISO-8747 - Grooved pins with countersunk head
- SS-ISO-8748 - Spring-type straight pins - Coiled, heavy duty
- SS-ISO-8749 - Pins and grooved pins - Shear test
- SS-ISO-8750 - Spring-type straight pins - Coiled, standard duty
- SS-ISO-8751 - Spring-type straight pins - Coiled, light duty
- SS-ISO-8752 - Spring-type straight pins, slotted