Document Center List of Standards on Plain Bearings
ICS Code 21.100.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-B439 - Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
- ASTM-B612 - Iron Bronze Sintered Bearings (Oil-Impregnated)
- ASTM-B782 - Standard Specification for Iron Graphite Sintered Bearings (Oil-Impregnated) (Withdrawn 2007)
- ASTM-D7973 - Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
- ASTM-F2332 - Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
BSI:
- BS-4480-7 - Plain bearings: metric series. Specification for dimensions and tolerances of pressed bimetallic half thrust washers
- BS-7585-1 - Metallic multilayer plain bearings. Method for non-destructive ultrasonic testing of bond
- BS-7585-2 - Metallic multilayer plain bearings. Method for destructive testing of bond for bearing metal layer thickness > or = 2 mm
- BS-7679 - Plain Bearings, Quality Control Techniques & Inspection of Geometrical & Material Qual
- BS-7762 - Plain bearings. Quality characteristics. Statistical process control (SPC)
- BS-7772 - Plain Bearings. Measurement of Wall Thickness of Thin-WALLEDHALF-Bearings and Thin-Wal
- BS-7823-1 - Pedestal plain bearings. Specification for pillow blocks
- BS-7823-2 - Pedestal plain bearings. Specification for side flange bearings
- BS-7823-3 - Pedestal plain bearings. Specification for centre flange bearings
- BS-ISO-10129 - Plain bearings. Testing of bearing metals. Resistance to corrosion by lubricants under static conditions
- BS-ISO-11687-3 - Plain bearings. Pedestal plain bearings
- BS-ISO-12128 - Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes
- BS-ISO-12129-1 - Plain bearings. Tolerances
- BS-ISO-12130-2 - Plain bearings. Hydrodynamic plain tilting pad thrust bearings under steady-state conditions
- BS-ISO-12130-3 - Plain bearings. Hydrodynamic plain tilting pad thrust bearings under steady-state conditions
- BS-ISO-12131-1 - Plain bearings. Hydrodynamic plain thrust pad bearings under steady-state conditions
- BS-ISO-12131-3 - Plain bearings. Hydrodynamic plain thrust pad bearings under steady-state conditions
- BS-ISO-12132 - Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
- BS-ISO-12168-1 - Plain bearings. Hydrostatic plain journal bearings without drainage grooves under steady-state conditions
- BS-ISO-12168-2 - Plain bearings. Hydrostatic plain journal bearings without drainage grooves under steady-state conditions
- BS-ISO-12240-1 - Spherical plain bearings. Radial spherical plain bearings
- BS-ISO-12240-2 - Spherical plain bearings. Angular contact radial spherical plain bearings
- BS-ISO-12240-3 - Spherical plain bearings. Thrust spherical plain bearings
- BS-ISO-12240-4 - Spherical plain bearings. Spherical plain bearing rod ends
- BS-ISO-12301 - Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
- BS-ISO-12302 - Plain bearings. Quality characteristics. Statistical process control (SPC)
- BS-ISO-12308 - Plain bearings. Quality assurance of sample types. Definitions, applications and testing
- BS-ISO-13012 - Rolling Bearings, Linear Motion, Recirculating Ball, Sleeve Type, Accessories
- BS-ISO-13778 - Plain bearings. Quality assurance of thin-walled half bearings. Selective assembly of bearings to achieve a narrow clearance range
- BS-ISO-13939 - Foil bearings. Performance testing of foil journal bearings. Testing of static load capacity, friction coefficient and lifetime
- BS-ISO-14287 - Plain bearings. Pad materials for tilting pad bearings
- BS-ISO-16287 - Plain bearings. Thermoplastic bushes. Dimensions and tolerances
- BS-ISO-19259 - Plain bearings. Bearings with embedded solid lubricants
- BS-ISO-19349 - Plain bearings with liquid lubrication. Lubricant supply arrangements and monitoring
- BS-ISO-20054 - Plain bearings. Bearings containing dispersed solid lubricants
- BS-ISO-22423 - Foil bearings. Performance testing of foil thrust bearings. Testing of static load capacity, bearing torque, friction coefficient and lifetime
- BS-ISO-2795 - Plain bearings. Sintered bushes. Dimensions and tolerances
- BS-ISO-3547-1 - Plain bearings. Wrapped bushes. Dimensions
- BS-ISO-3547-2 - Plain bearings. Wrapped bushes. Test data for outside and inside diameters
- BS-ISO-3547-3 - Plain bearings. Wrapped bushes. Lubrication holes, grooves and indentations
- BS-ISO-3547-4 - Plain bearings. Wrapped bushes. Materials
- BS-ISO-3547-5 - Plain bearings. Wrapped bushes
- BS-ISO-3547-6 - Plain bearings. Wrapped bushes
- BS-ISO-3547-7 - Plain bearings. Wrapped bushes
- BS-ISO-3548 - Plain bearings. Thin-walled half bearings with or without Flange. Tolerances, design features and methods of test
- BS-ISO-3548-2 - Plain bearings. Thin-walled half bearings with or without flange
- BS-ISO-3548-3 - Plain bearings. Thin-walled half bearings with or without flange
- BS-ISO-4378-1 - Plain bearings. Terms, definitions, classification and symbols. Design, bearing materials and their properties
- BS-ISO-4378-2 - Plain bearings. Terms, definitions, classification and symbols. Friction and wear
- BS-ISO-4378-3 - Plain bearings. Terms, definitions, classification and symbols. Lubrication
- BS-ISO-4378-4 - Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4378-5 - Plain bearings. Terms, definitions, classification and symbols
- BS-ISO-4379 - Plain bearings. Copper alloy bushes
- BS-ISO-4381 - Plain bearings. Tin casting alloys for multilayer plain bearings
- BS-ISO-4383 - Plain bearings. Multilayer materials for thin-walled plain bearings
- BS-ISO-4384-1 - Plain bearings. Hardness testing of bearing metals
- BS-ISO-4386-1 - Plain bearings. Metallic multilayer plain bearings
- BS-ISO-4386-2 - Plain bearings. Metallic multilayer plain bearings
- BS-ISO-4386-3 - Plain bearings. Metallic multilayer plain bearings
- BS-ISO-6279 - Plain bearings. Aluminium alloys for solid bearings
- BS-ISO-6280 - Plain bearings. Requirements and guidance on backings for thick-walled multilayer bearings
- BS-ISO-6281 - Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs
- BS-ISO-6282 - Plain bearings. Metallic thin-walled half bearings. Determination of the 0,01*-limit
- BS-ISO-6526 - Plain bearings. Pressed bimetallic half thrust washers. Features and tolerances
- BS-ISO-6811 - Spherical plain bearings. Vocabulary
- BS-ISO-7146-1 - Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearings
- BS-ISO-7146-2 - Plain bearings. Appearance and characterization of damage to metallic hydrodynamic bearings
- BS-ISO-7148-1 - Plain bearings. Testing of the tribological behaviour of bearing materials
- BS-ISO-7148-2 - Plain bearings. Testing of the tribological behaviour of bearing materials
- BS-ISO-7902-1 - Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings
- BS-ISO-7902-2 - Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings
- BS-ISO-7902-3 - Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings
- BS-ISO-7905-3 - Plain bearings. Bearing fatigue
- PD-ISO-20051 - Spherical plain bearings. Derivation of the load rating factors
- PD-ISO-21784 - Plain bearings. Spray nozzle type directed lubrication for tilting pad bearings
- PD-ISO-27507 - Plain bearings. Recommendations for automotive crankshaft bearing environments
- PD-ISO-31657-1 - Plain bearings. Hydrodynamic plain journal bearings under steady-state conditions
- PD-ISO-31657-2 - Plain bearings. Hydrodynamic plain journal bearings under steady-state conditions
- PD-ISO-31657-3 - Plain bearings. Hydrodynamic plain journal bearings under steady-state conditions
- PD-ISO-31657-4 - Plain bearings. Hydrodynamic plain journal bearings under steady-state conditions
ISO:
- ISO-10129 - Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions
- ISO-11687-1 - Plain bearings - Pedestal plain bearings - Part 1: Pillow blocks
- ISO-11687-2 - Plain bearings - Pedestal plain bearings - Part 2: Side flange bearings
- ISO-11687-3 - Plain bearings - Pedestal plain bearings - Part 3: Centre flange bearings
- ISO-12128 - Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
- ISO-12129-1 - Plain bearings - Tolerances - Part 1: Fits
- ISO-12129-2 - Plain bearings - Tolerances - Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars
- ISO-12130-1 - Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings
- ISO-12130-2 - Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings
- ISO-12130-3 - Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings
- ISO-12131-1 - Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings
- ISO-12131-2 - Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings
- ISO-12131-3 - Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 3: Guide values for the calculation of thrust pad bearings
- ISO-12132 - Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA
- ISO-12167-1 - Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
- ISO-12167-2 - Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
- ISO-12168-1 - Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
- ISO-12168-2 - Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
- ISO-12240-1 - Spherical plain bearings - Part 1: Radial spherical plain bearings
- ISO-12240-2 - Spherical plain bearings - Part 2: Angular contact radial spherical plain bearings
- ISO-12240-3 - Spherical plain bearings - Part 3: Thrust spherical plain bearings
- ISO-12240-4 - Spherical plain bearings - Part 4: Spherical plain bearing rod ends
- ISO-12301 - Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics
- ISO-12302 - Plain bearings - Quality characteristics - Statistical process control (SPC)
- ISO-12303 - Plain bearings - Quality characteristics - Calculation of machine and process capabilities
- ISO-12306 - Plain bearings - Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
- ISO-12307-1 - Plain bearings - Wrapped bushes - Part 1: Checking the outside diameter
- ISO-12307-2 - Plain bearings -- Checking of wrapped bushes -- Part 2: Checking the inside diameter
- ISO-12308 - Plain bearings - Quality assurance of sample types - Definitions, applications and testing
- ISO-13778 - Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range
- ISO-13939 - Foil bearings - Performance testing of foil journal bearings - Testing of static load capacity, friction coefficient and lifetime
- ISO-14287 - Plain bearings - Pad materials for tilting pad bearings
- ISO-16287 - Plain bearings - Thermoplastic bushes - Dimensions and tolerances
- ISO-17606 - Plain bearings - Lubrication characteristics of crosshead pin bearings for low-speed marine diesel engines
- ISO-19259 - Plain bearings - Bearings with embedded solid lubricants
- ISO-19349 - Plain bearings with liquid lubrication - Lubricant supply arrangements and monitoring
- ISO-20051 - Spherical plain bearings - Derivation of the load rating factors
- ISO-20054 - Plain bearings - Bearings containing dispersed solid lubricants
- ISO-21433 - Plain bearings - Handling of plain bearings
- ISO-21784 - Plain bearings - Spray nozzle type directed lubrication for tilting pad bearings
- ISO-22423 - Foil bearings - Performance testing of foil thrust bearings - Testing of static load capacity, bearing torque, friction coefficient and lifetime
- ISO-22507 - Plain bearings - Fluid film bearing materials for vehicular turbocharger
- ISO-27507 - Plain bearings - Recommendations for automotive crankshaft bearing environments
- ISO-2795 - Plain bearings - Sintered bushes - Dimensions and tolerances
- ISO-31657-1 - Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 1: Calculation of multi-lobed and tilting pad journal bearings
- ISO-31657-2 - Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of multi-lobed journal bearings
- ISO-31657-3 - Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Functions for calculation of tilting pad journal bearings
- ISO-31657-4 - Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings
- ISO-3547-1 - Plain bearings - Wrapped bushes - Part 1: Dimensions
- ISO-3547-2 - Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameters
- ISO-3547-3 - Plain bearings - Wrapped bushes - Part 3: Lubrication holes, grooves and indentations
- ISO-3547-4 - Plain bearings - Wrapped bushes - Part 4: Materials
- ISO-3547-5 - Plain bearings - Wrapped bushes - Part 5: Checking the outside diameter
- ISO-3547-6 - Plain bearings - Wrapped bushes - Part 6: Checking the inside diameter
- ISO-3547-7 - Plain bearings - Wrapped bushes - Part 7: Measurement of wall thickness of thin-walled bushes
- ISO-3548 - Plain bearings -- Thin-walled half bearings with or without flange -- Tolerances, design features and methods of test
- ISO-3548-1 - Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test
- ISO-3548-2 - Plain bearings - Thin-walled half bearings with or without flange - Part 2: Measurement of wall thickness and flange thickness
- ISO-3548-3 - Plain bearings - Thin-walled half bearings with or without flange - Part 3: Measurement of peripheral length
- ISO-4378-1 - Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties
- ISO-4378-2 - Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear
- ISO-4378-3 - Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication
- ISO-4378-4 - Plain bearings - Terms, definitions, classification and symbols - Part 4: Basic symbols
- ISO-4378-5 - Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols
- ISO-4378-6 - Plain bearings - Terms, definitions, classification and symbols - Part 6: Abbreviated terms
- ISO-4379 - Plain bearings - Copper alloy bushes
- ISO-4381 - Plain bearings - Tin casting alloys for multilayer plain bearings
- ISO-4382-1 - Plain bearings - Copper alloys - Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
- ISO-4382-2 - Plain bearings - Copper alloys - Part 2 : Wrought copper alloys for solid plain bearings
- ISO-4383 - Plain bearings - Multilayer materials for thin-walled plain bearings
- ISO-4384-1 - Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
- ISO-4384-2 - Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials
- ISO-4385 - Plain bearings - Compression testing of metallic bearing materials
- ISO-4386-1 - Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm
- ISO-4386-2 - Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
- ISO-4386-3 - Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing
- ISO-6279 - Plain bearings - Aluminium alloys for solid bearings
- ISO-6280 - Plain bearings - Requirements and guidance on backings for thick-walled multilayer bearings
- ISO-6281 - Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs
- ISO-6282 - Plain bearings - Metallic thin-walled half bearings - Determination of the sigma 0,01*-limit
- ISO-6524 - Plain bearings - Thin-walled half-bearings - Checking of peripheral length
- ISO-6525 - Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances
- ISO-6526 - Plain bearings - Pressed bimetallic half thrust washers - Features and tolerances
- ISO-6691 - Thermoplastic polymers for plain bearings -- Classification and designation
- ISO-6811 - Spherical plain bearings - Vocabulary
- ISO-7146 - Plain bearings - Terms, characteristics and causes of damage and changes in appearance
- ISO-7146-1 - Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 1: General
- ISO-7146-2 - Plain bearings - Appearance and characterization of damage to metallic hydrodynamic bearings - Part 2: Cavitation erosion and its countermeasures
- ISO-7148-1 - Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals
- ISO-7148-2 - Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials
- ISO-7902-1 - Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 1: Calculation procedure
- ISO-7902-2 - Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure
- ISO-7902-3 - Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters
- ISO-7904-1 - Plain bearings - Symbols - Part 1: Basic symbols
- ISO-7904-2 - Plain bearings - Symbols - Part 2: Applications
- ISO-7905-1 - Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication
- ISO-7905-2 - Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material
- ISO-7905-3 - Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material
- ISO-7905-4 - Plain bearings - Bearing fatigue - Part 4: Tests on half-bearings of a metallic multilayer bearing material
Other SDOs:
- BS-ISO-11687-1 - Plain bearings. Pedestal plain bearings
- BS-ISO-11687-2 - Plain bearings. Pedestal plain bearings
- JIS-B-0161 - Spherical plain bearings -- Vocabulary
- JIS-B-1586 - Plain bearings -- Bearings with embedded solid lubricants
- JIS-B-1587 - Plain bearings -- Bearings containing dispersed solid lubricants
- SS-EN-ISO-128-1 - Technical product documentation (TPD) - General principles of representation - Part 1: Introduction and fundamental requirements (ISO 128-1:2020)
- SS-ISO-12301 - Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics
- SS-ISO-2795 - Plain bearings - Sintered bushes - Dimensions andtolerances
- SS-ISO-3547 - Plain bearings - Wrapped bushes - Dimensions, tolerances and methods of checking
- SS-ISO-4379 - Plain bearings - Copper alloy bushes
- SS-ISO-4381 - Plain bearings - Lead and tin casting alloys for multilayer plain bearings (ISO 4381:2000, IDT)
- SS-ISO-4382-1 - Plain bearings - Copper alloys - Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings
- SS-ISO-4382-2 - Plain bearings - Copper alloys - Part 2: Wrought copper alloys for solid plain bearings
- SS-ISO-4383 - Plain bearings - Multilayer materials for thin-walled plain bearings (ISO 4383:2000, IDT)
- SS-ISO-4384-1 - Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials (ISO 4384-1:2000, IDT)
- SS-ISO-4384-2 - Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials
- SS-ISO-4385 - Plain bearings - Compression testing of metallic bearing materials
- SS-ISO-4386-1 - Plain bearings - Metallic multilayer plain bearings - Part 1: Non-destructive ultrasonic testing ofbond
- SS-ISO-4386-2 - Plain bearings - Metallic multilayer plain bearings - Part 2: Destructive testing of bond for bearing metal layer thickness greater than or equal to 2 mm
- SS-ISO-4386-3 - Plain bearings - Metallic multilayer plain bearings - Part 3: Non-destructive penetrant testing
- SS-ISO-6279 - Plain bearings - Aluminium alloys for solid bearings (ISO 6279:2006, IDT)
- SS-ISO-6280 - Plain bearings - Requirements on backings for thick-walled multilayer bearings
- SS-ISO-6282 - Plain bearings - Metallic thin-walled half bearings - Determination of the sigma 0,01*-limit
- SS-ISO-6524 - Plain bearings - Thin-walled half-bearings - Checking of peripheral length
- SS-ISO-6525 - Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances
- SS-ISO-6526 - Plain bearings - Pressed bimetallic half thrust washers - Features and tolerances
- SS-ISO-6691 - Thermoplastic polymers for plain bearings - Classification and designation (ISO 6691:2000, IDT)
- SS-ISO-6811 - Spherical plain bearings - Vocabulary (ISO 6811:1998, IDT)
- SS-ISO-6864 - Plain bearings - Thin-walled flanged half bearings - Dimensions, tolerances and methods of checking
- SS-ISO-7146 - Plain bearings - Terms, characteristics and causes of dagage and changes in appearance
- SS-ISO-7148-1 - Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals (ISO 7148-1:1999, IDT)