Document Center List of Standards on Rolling Bearings
ICS Code 21.100.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-F2162 - Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
- ASTM-F2163 - Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
- ASTM-F2246 - Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
- ASTM-F2430 - Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
- ASTM-F2431 - Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
- ASTM-F2443 - Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
- ASTM-F2590 - Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
- ASTM-F2591 - Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
- ASTM-F2730 - Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
- ASTM-F2953 - Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
- ASTM-F3131 - Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
- ASTM-G182 - Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
BSI:
- BS-3134-1 - Metric tapered roller bearings. Specification for dimensions and tolerances of single row bearings
- BS-3134-2 - Metric tapered roller bearings. Specification for dimensions of double row bearings
- BS-3134-3 - Metric tapered roller bearings. Specification for dimensions of flanged cups
- BS-3134-4 - Specification for Designation System
- BS-3469 - Specification for Instrument Precision Rolling Bearings (Ball Bearings)
- BS-5512 - Method of Calculating Dynamic Load Ratings and Rating Life of Rolling Bearings
- BS-5645 - Specification for Static Load Ratings for Rolling Bearings
- BS-5646-1 - Rolling bearings. Accessories. Specification for locknuts, narrow series, and lockwashers with straight inner tab
- BS-5646-3 - Rolling bearings. Accessories. Specification for tapered mounting sleeves
- BS-5646-5 - Rolling bearings. Accessories. Specification for snap ring groove and snap ring dimensions
- BS-5773-1 - Specification for Dimensions and Tolerances of Needle Roller Bearings: Light & Medium
- BS-5773-2 - Metric needle roller bearings. Specification for dimensions and tolerances of needle roller bearings, drawn cup, without inner ring
- BS-5988 - Specification for minimum and maximum chamfer dimensions of metric series rolling bearings
- BS-5989-1 - Rolling bearings: metric thrust bearings. Specification for dimensions of thrust bearings
- BS-5989-2 - Rolling bearings: metric thrust bearings. Specification for tolerances of thrust ball bearings
- BS-6010-3 - Rolling bearings. Bearings with speherical outside surface and extended inner ring width. Specification for dimensions of cast and pressed housings
- BS-6107-2 - Rolling bearings: tolerances. Specification for tolerances of radial bearings
- BS-6560 - Glossary of terms for rolling bearings
- BS-7637 - Specification for linear motion, recirculating ball, sleeve type rolling bearings (metric series)
- BS-EN-ISO-8826-1 - Technical drawings. Roller bearings
- BS-EN-ISO-8826-2 - Technical drawings. Roller bearings
- BS-ISO-10285 - Rolling bearings. Sleeve type linear ball bearings. Boundary dimensions and tolerances
- BS-ISO-10317 - Rolling bearings. Tapered roller bearings. Designation system
- BS-ISO-104 - Rolling bearings. Thrust bearings. Boundary dimensions, general plan
- BS-ISO-104-TC - Tracked Changes. Rolling bearings. Thrust bearings. Boundary dimensions, general plan
- BS-ISO-113 - Rolling bearings. Plummer block housings. Boundary dimensions
- BS-ISO-1132-1 - Rolling bearings. Tolerances
- BS-ISO-1132-2 - Rolling bearings. Tolerances
- BS-ISO-12043 - Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
- BS-ISO-12044 - Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side
- BS-ISO-1206 - Rolling bearings. Needle roller bearings with machined rings. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-1206-TC - Tracked Changes. Rolling bearings. Needle roller bearings with machined rings. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-12090-1 - Rolling bearings. Profiled rail guides for linear motion rolling bearings
- BS-ISO-12090-2 - Rolling bearings. Profiled rail guides for linear motion rolling bearings
- BS-ISO-1224-1 - Rolling bearings. Instrument precision bearings
- BS-ISO-1224-2 - Rolling bearings. Instrument precision bearings
- BS-ISO-12297 - Rolling bearings. Steel cylindrical rollers. Dimensions and tolerances
- BS-ISO-12297-1 - Rolling bearings. Cylindrical rollers
- BS-ISO-12297-1-TC - Tracked Changes. Rolling bearings. Cylindrical rollers
- BS-ISO-12297-2 - Rolling bearings. Cylindrical rollers
- BS-ISO-13012-1 - Rolling bearings. Accessories for sleeve type linear ball bearings
- BS-ISO-13012-1-TC - Tracked Changes. Rolling bearings. Accessories for sleeve type linear ball bearings
- BS-ISO-13012-2 - Rolling bearings. Accessories for sleeve type linear ball bearings
- BS-ISO-13012-2-TC - Tracked Changes. Rolling bearings. Accessories for sleeve type linear ball bearings
- BS-ISO-14728-1 - Rolling bearings. Linear motion rolling bearings
- BS-ISO-14728-1-TC - Tracked Changes. Rolling bearings. Linear motion rolling bearings
- BS-ISO-14728-2 - Rolling bearings. Linear motion rolling bearings
- BS-ISO-15 - Rolling bearings. Radial bearings. Boundary dimensions, general plan
- BS-ISO-15241 - Rolling bearings. Symbols for physical quantities
- BS-ISO-15242-1 - Rolling bearings. Measuring methods for vibration
- BS-ISO-15242-1-TC - Tracked Changes. Rolling bearings. Measuring methods for vibration
- BS-ISO-15242-2 - Rolling bearings. Measuring methods for vibration
- BS-ISO-15242-2-TC - Tracked Changes. Rolling bearings. Measuring methods for vibration
- BS-ISO-15242-3 - Rolling bearings. Measuring methods for vibration
- BS-ISO-15242-4 - Rolling bearings. Measuring methods for vibration
- BS-ISO-15242-4-TC - Tracked Changes. Rolling bearings. Measuring methods for vibration
- BS-ISO-15243 - Rolling bearings. Damage and failures. Terms, characteristics and causes
- BS-ISO-15243-TC - Tracked Changes. Rolling bearings. Damage and failures. Terms, characteristics and causes
- BS-ISO-15312-TC - Tracked Changes. Rolling bearings. Thermal speed rating. Calculation
- BS-ISO-15-TC - Tracked Changes. Rolling bearings. Radial bearings. Boundary dimensions, general plan
- BS-ISO-19843 - Rolling bearings. Ceramic bearing balls. Determination of strength by notched ball test
- BS-ISO-199 - Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
- BS-ISO-20015 - Spherical plain bearings. Method for the calculation of static and dynamic load ratings
- BS-ISO-20056-1 - Rolling bearings. Load ratings for hybrid bearings with rolling elements made of ceramic
- BS-ISO-20056-2 - Rolling bearings. Load ratings for hybrid bearings with rolling elements made of ceramic
- BS-ISO-20515 - Rolling bearings. Radial bearings, retaining slots. Dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-20515-TC - Tracked Changes. Rolling bearings. Radial bearings, retaining slots. Dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-20516 - Rolling bearings. Aligning thrust ball bearings and aligning seat washers. Boundary dimensions
- BS-ISO-21107 - Rolling bearings and spherical plain bearings. Search structure for electronic media. Characteristics and performance criteria identified by property vocabulary
- BS-ISO-21250-1 - Rolling bearings. Noise testing of rolling bearing greases
- BS-ISO-21250-2 - Rolling bearings. Noise testing of rolling bearing greases
- BS-ISO-21250-3 - Rolling bearings. Noise testing of rolling bearing greases
- BS-ISO-21250-4 - Rolling bearings. Noise testing of rolling bearing greases
- BS-ISO-246 - Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions
- BS-ISO-281 - Rolling bearings. Dynamic load ratings and rating life
- BS-ISO-2982-1 - Rolling bearings. Accessories
- BS-ISO-2982-2 - Rolling bearings. Accessories
- BS-ISO-3030 - Rolling bearings - Radial needle roller and cage assemblies - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-3030-TC - Tracked Changes. Rolling bearings. Radial needle roller and cage assemblies. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-3031 - Rolling bearings. Thrust needle roller and cage assemblies, thrust washers. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-3031-TC - Tracked Changes. Rolling bearings. Thrust needle roller and cage assemblies, thrust washers. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-3096-TC - Tracked Changes. Rolling bearings. Needle rollers. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-3228 - Rolling bearings. Cast and pressed housings for insert bearings. Boundary dimensions and tolerances
- BS-ISO-3245 - Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-3245-TC - Tracked Changes. Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-3290 - Rolling Bearings, Balls, Dimensions & Tolerances
- BS-ISO-3290-1 - Rolling bearings. Balls
- BS-ISO-3290-2 - Rolling bearings. Balls
- BS-ISO-355 - Rolling bearings. Tapered roller bearings. Boundary dimensions and series designations
- BS-ISO-464 - Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-464-TC - Tracked Changes. Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
- BS-ISO-492 - Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
- BS-ISO-5593 - Rolling bearings. Vocabulary
- BS-ISO-5593-TC - Tracked Changes. Rolling bearings. Vocabulary
- BS-ISO-5753-1 - Rolling bearings. Internal clearance
- BS-ISO-582 - Rolling bearings. Chamfer dimensions. Maximum values
- BS-ISO-76 - Rolling bearings. Static load ratings
- BS-ISO-8443 - Rolling bearings. Radial ball bearings with flanged outer ring. Flange dimensions
- BS-ISO-9628 - Rolling bearings. Insert bearings and eccentric locking collars. Geometrical product specifications (GPS) and tolerance values
- DD-ISO-16281 - Rolling bearings. Methods for calculating the modified reference rating life for universally loaded bearings
- PD-6487 - Guide for calculating the life of ball bearings when used in contact with fire resistant hydraulic fluids
- PD-ISO-10657 - Explanatory notes on ISO 76
- PD-ISO-1281-1 - Rolling bearings. Explanatory notes on ISO 281
- PD-ISO-1281-2 - Rolling bearings. Explanatory notes on ISO 281
- PD-ISO-23768 - Rolling bearings. Parts library. Reference dictionary for rolling bearings
ISO:
- ISO-10285 - Rolling bearings - Sleeve type linear ball bearings - Boundary dimensions and tolerances
- ISO-10285-AM1 - Rolling bearings, linear motion, recirculating ball, sleeve type - Metric series - Amendment 1
- ISO-10317 - Rolling bearings - Tapered roller bearings - Designation system
- ISO-10317-AM1 - - Amendment 1: Design variant designation and comparison of tolerance class designations for single-row tapered roller bearings
- ISO-104 - Rolling bearings - Thrust bearings - Boundary dimensions, general plan
- ISO-10657 - Explanatory notes on ISO 76
- ISO-113 - Rolling bearings - Plummer block housings - Boundary dimensions
- ISO-113-1 - Rolling bearing accessories -- Part 1: Tapered sleeves
- ISO-1132 - Rolling bearings -- Tolerances -- Definitions
- ISO-113-2 - Rolling bearing accessories -- Part 2: Plummer block housings
- ISO-1132-1 - Rolling bearings -- Tolerances -- Part 1: Terms and definitions
- ISO-1132-2 - Rolling bearings - Tolerances - Part 2: Measuring and gauging principles and methods
- ISO-12043 - Rolling bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides
- ISO-12044 - Rolling bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side
- ISO-1206 - Rolling bearings - Needle roller bearings with machined rings - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO-1206-AM1 - - Amendment 1: Tolerances for shaft raceway
- ISO-12090-1 - Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 1: Boundary dimensions and tolerances for series 1, 2 and 3
- ISO-12090-2 - Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 2: Boundary dimensions and tolerances for series 4 and 5
- ISO-1224 - Bearings Rolling, Instrument Precision Bearings
- ISO-1224-1 - Rolling bearings - Instrument precision bearings - Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings
- ISO-1224-2 - Rolling bearings - Instrument precision bearings - Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings
- ISO-12297 - Rolling bearings - Steel cylindrical rollers - Dimensions and tolerances
- ISO-12297-1 - Rolling bearings - Cylindrical rollers - Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for steel rollers
- ISO-12297-2 - Rolling bearings - Cylindrical rollers - Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
- ISO-1281-1 - Rolling bearings - Explanatory notes on ISO 281 - Part 1: Basic dynamic load rating and basic rating life
- ISO-1281-2 - Rolling bearings - Explanatory notes on ISO 281 - Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses
- ISO-13012 - Corrigendum
- ISO-13012-1 - Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3
- ISO-13012-2 - Rolling bearings - Accessories for sleeve type linear ball bearings - Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5
- ISO-14728-1 - Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life
- ISO-14728-2 - Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings
- ISO-15 - Rolling bearings - Radial bearings - Boundary dimensions, general plan
- ISO-15-2 - Withdrawal of ISO/R 15/2-1970 - Use ISO-15
- ISO-15241 - Rolling bearings - Symbols for physical quantities
- ISO-15241-AM1 - - Amendment 1
- ISO-15242-1 - Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals
- ISO-15242-2 - Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface
- ISO-15242-3 - Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
- ISO-15242-4 - Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
- ISO-15243 - Rolling bearings - Damage and failures - Terms, characteristics and causes
- ISO-15312 - Rolling bearings - Thermal speed rating - Calculation
- ISO-16281 - Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings
- ISO-19843 - Rolling bearings - Ceramic bearing balls - Determination of strength by notched ball test
- ISO-199 - Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerance values
- ISO-20015 - Spherical plain bearings - Method for the calculation of static and dynamic load ratings
- ISO-20056-1 - Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 1: Dynamic load ratings
- ISO-20056-2 - Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings
- ISO-20515 - Rolling bearings - Radial bearings, retaining slots - Dimensions, geometrical product specifications (GPS) and tolerance values
- ISO-20516 - Rolling bearings - Aligning thrust ball bearings and aligning seat washers - Boundary dimensions
- ISO-21250-1 - Rolling bearings - Noise testing of rolling bearing greases - Part 1: Basic principles, testing assembly and test machine
- ISO-21250-2 - Rolling bearings - Noise testing of rolling bearing greases - Part 2: Test and evaluation method BQ+
- ISO-21250-3 - Rolling bearings - Noise testing of rolling bearing greases - Part 3: Test and evaluation method MQ
- ISO-21250-4 - Rolling bearings - Noise testing of rolling bearing greases - Part 4: Test and evaluation method NQ
- ISO-23768 - Rolling bearings - Parts library - Reference dictionary for rolling bearings
- ISO-23768-1 - Rolling bearings - Parts library - Part 1: Reference dictionary for rolling bearings
- ISO-24393 - Rolling bearings - Linear motion rolling bearings - Vocabulary
- ISO-246 - Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
- ISO-281 - Rolling bearings - Dynamic load ratings and rating life
- ISO-281-1 - Amendment
- ISO-281-2 - Life modification factor aXYZ
- ISO-2982-1 - Rolling bearings - Accessories - Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves
- ISO-2982-2 - Rolling bearings - Accessories - Part 2: Dimensions for locknuts and locking devices
- ISO-3030 - Rolling bearings - Radial needle roller and cage assemblies - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO-3031 - Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO-3096 - Rolling bearings - Needle rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO-3228 - Rolling bearings - Cast and pressed housings for insert bearings - Boundary dimensions and tolerances
- ISO-3245 - Rolling bearings - Needle roller bearings with drawn cup and without inner ring - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO-3290 - Rolling bearings -- Balls -- Dimensions and tolerances
- ISO-3290-1 - Rolling bearings - Balls - Part 1: Steel balls
- ISO-3290-2 - Rolling bearings - Balls - Part 2: Ceramic balls
- ISO-355 - Rolling bearings - Tapered roller bearings - Boundary dimensions and series designations
- ISO-355/1 - Addendum 1 to ISO 355:1977
- ISO-355/2 - Addendum 2 to ISO 355:1977
- ISO-355-AM1 - Rolling bearings - Metric tapered roller bearings - Boundary dimensions and series designations - Amendment 1
- ISO-464 - Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values
- ISO-492 - Rolling bearings - Radial bearings - Dimensional and geometrical tolerances
- ISO-5593 - Rolling bearings - Vocabulary
- ISO-5593-1 - Rolling bearings - Vocabulary - Amendment 1
- ISO-5753 - Rolling bearings - Radial internal clearance
- ISO-5753-1 - Rolling bearings - Internal clearance - Part 1: Radial internal clearance for radial bearings
- ISO-5753-2 - Rolling bearings - Internal clearance - Part 2: Axial internal clearance for four-point-contact ball bearings
- ISO-582 - Rolling bearings - Chamfer dimensions - Maximum values
- ISO-582-AM1 - - Amendment 1
- ISO-7063 - Rolling bearings - Needle roller bearing track rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO-76 - Rolling bearings - Static load ratings
- ISO-76-1 - - Amendment 1
- ISO-76-AM1 - - Amendment 1
- ISO-8443 - Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions
- ISO-8826-1 - Technical drawings - Rolling bearings - Part 1: General simplified representation
- ISO-8826-2 - Technical drawings - Rolling bearings - Part 2: Detailed simplified representation
- ISO-9628 - Rolling bearings - Insert bearings and eccentric locking collars - Geometrical product specifications (GPS) and tolerance values
- ISO-9628-AM1 - Rolling bearings - Insert bearings and eccentric locking collars - Amendment 1: Diameter series 3
Other SDOs:
- DIN-5401 - Balls for Rolling Bearings & General Industrial Use
- DIN-620-4 - Tolerances for Rolling Bearings, Radial Internal Clearance
- DIN-620-6 - Tolerances for Rolling Bearings, Chamfer Dimension Limits
- DIN-ISO-14728-1 - Part 1: Dynamic Load Ratings & Rating Life, Rolling Bearings, Linear Motion Rolling Be
- DIN-ISO-14728-2 - Part 2: Static Load Ratings, Rolling Bearings, Linear Motion Rolling Bearings
- DIN-ISO-15312 - Rolling Bearings, Thermal Speed Rating - Calculation & Coefficients
- EN-12080 - Railway applications - Axleboxes - Rolling bearings
- EN-ISO-8826-1 - Technical Drawings, Roller Bearings, General Simplified Representation
- EN-ISO-8826-2 - Technical Drawings, Roller Bearings, Detailed Simplified Representation
- JIS-B-0005-1 - Technical drawings -- Rolling bearings -- Part 1: General simplified representation
- JIS-B-0005-2 - Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation
- JIS-B-0104 - Rolling bearings -- Vocabulary
- JIS-B-0124 - Rolling bearings -- Symbols for quantities
- JIS-B-1510 - Rolling bearings -- Radial bearings, retaining slots -- Dimensions and tolerances
- JIS-B-1512 - Rolling Bearings - Boundary Dimensions
- JIS-B-1512-6 - Rolling bearings -- Boundary dimensions -- Part 6: Chamfer dimensions for outer ring non-thrust side of single-row angular contact ball bearings
- JIS-B-1514 - Rolling Bearings - Tolerances
- JIS-B-1519 - Rolling bearings -- Static load ratings
- JIS-B-1522 - Rolling bearings -- Angular contact ball bearings
- JIS-B-1523 - Rolling bearings -- Self-aligning ball bearings
- JIS-B-1536 - Rolling Bearings - Needle Roller Bearings - Dimensions & Tolerances
- JIS-B-1550 - Rolling bearings -- Thermal speed rating -- Calculation
- JIS-B-1551 - Rolling bearings -- Plummer block housings
- JIS-B-1557 - Rolling bearings -- Insert bearing units
- JIS-B-1558 - Rolling bearings -- Insert bearings and eccentric locking collars
- JIS-B-1559 - Rolling bearings -- Cast and pressed housings for insert bearings
- JIS-B-1562 - Rolling bearings -- Damage and failures -- Terms, characteristics and causes
- SIS-ISO-1281-1 - Rolling bearings - Explanatory notes on ISO 281 - Part 1: Basic dynamic load rating and basic rating life (ISO/TR 1281-1:2021)
- SIS-ISO/TR-10657 - Explanatory notes on ISO 76 (ISO/TR 10657:2021, IDT)
- SIS-ISO/TR-1281-1 - Rolling bearings - Explanatory notes on ISO 281 - Part 1: Basic dynamic load rating and basic rating life - Technical Corrigendum 1
- SIS-ISO/TR-1281-2 - Rolling bearings - Explanatory notes on ISO 281 - Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses - Technical Corrigendum 1,Rolling bearings - Explanatory notes on ISO 281 - Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses - Technical Corrigendum 1
- SIS-ISO/TS-16281 - Rolling bearings - Methods for calculating the modified reference rating life for universally loaded bearings - Technical Corrigendum 1
- SIS-ISO/TS-23768 - Rolling bearings Parts library - Reference dictionary for rolling bearings (ISO/TS 23768:2022, IDT)
- SS-EN-12080 - Railway applications - Axleboxes - Rolling bearings
- SS-EN-12080-AM1 - Railway applications - Axleboxes - Rolling bearings
- SS-EN-2063 - Aerospace series - Airframe rolling bearings - Technical specification
- SS-EN-3053 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel -Dimensions and loads
- SS-EN-3054 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Dimensions and loads
- SS-EN-3055 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Dimensions and loads
- SS-EN-3056 - Arospace series - Bearings, airframe rolling - Rigid double row ball bearings in steel - Dimensionsand loads
- SS-EN-3057 - Aerospace series - Bearings, airframe rolling - Rigid double row ball bearings in steel, cadmium plated - Dimensions and loads
- SS-EN-3058 - Aerospace series - Bearings, airframe rolling - Rigid double row ball bearings in corrosion resisting steel - Dimensions and loads
- SS-EN-3280 - Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification
- SS-EN-3281 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9 - Dimensions and loads
- SS-EN-3282 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9 - Dimensions and loads
- SS-EN-3283 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9 - Dimensions and loads
- SS-EN-3284 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
- SS-EN-3285 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
- SS-EN-3286 - Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads
- SS-EN-3287 - Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2 - Dimensions and loads
- SS-EN-3288 - Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2 - Dimensions and loads
- SS-EN-3289 - Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in corrosionresisting steel - Diameter series 2 - Dimensions and loads
- SS-EN-3290 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel -Diameter series 3 and 4 - Dimensions and loads
- SS-EN-3291 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4 - Dimensions and loads
- SS-EN-3292 - Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4 - Dimensions and loads
- SS-EN-3541 - Aerospace series - Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads
- SS-EN-ISO-8826-1 - Technical drawings - Roller bearings - Part 1: General simplified representation (ISO 8826-1:1989)
- SS-EN-ISO-8826-2 - Technical drawings - Roller bearings - Part 2: Detailed simplified representation (ISO 8826-2:1994)
- SS-ISO-104 - Rolling bearings - Thrust bearings - Boundary dimensions, general plan (ISO 104:2015, IDT)
- SS-ISO-1132-1 - Rolling bearings - Tolerances - Part 1: Terms and definitions (ISO 1132-1:2000, IDT)
- SS-ISO-1132-2 - Rolling bearings - Tolerances - Part 2: Measuring and gauging principles and methods (ISO 1132-2:2001, IDT)
- SS-ISO-1206 - Rolling bearings Needle roller bearings with machined rings Boundary dimensions, geometrical product specifications (GPS) and tolerance values (ISO 1206:2018, IDT)
- SS-ISO-12240-4 - Spherical plain bearings - Part 4: Spherical plain bearing rod ends (ISO 12240-4:1998, IDT)
- SS-ISO-12297-1 - Rolling bearings Cylindrical rollers Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for steel rollers (ISO 12297-1:2021, IDT)
- SS-ISO-13012-1 - Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3 (ISO 13012-1:2018, IDT)
- SS-ISO-13012-2 - Rolling bearings - Accessories for sleeve type linear ball bearings - Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5 (ISO 13012-2:2018, IDT)
- SS-ISO-15 - Rolling bearings - Radial bearings - Boundary dimensions, general plan (ISO 15:2017, IDT)
- SS-ISO-15241 - Rolling bearings - Symbols for physical quantities (ISO 15241:2012, IDT)
- SS-ISO-15241-AM1 - Rolling bearings - Symbols for physical quantities - Amendment 1 (ISO 15241:2012/Amd 1:2020, IDT)
- SS-ISO-15243 - Rolling bearings - Damage and failures - Terms, characteristics and causes (ISO 15243:2017, IDT)
- SS-ISO-20515 - Rolling bearings Radial bearings, retaining slots Dimensions, geometrical product specifications (GPS) and tolerance values (ISO 20515:2021, IDT)
- SS-ISO-21250-1 - Rolling bearings - Noise testing of rolling bearing greases - Part 1: Basic principles, testing assembly and test machine (ISO 21250-1:2020, IDT)
- SS-ISO-21250-2 - Rolling bearings - Noise testing of rolling bearing greases - Part 2: Test and evaluation method BQ+ (ISO 21250-2:2020, IDT)
- SS-ISO-21250-3 - Rolling bearings - Noise testing of rolling bearing greases - Part 3: Test and evaluation method MQ (ISO 21250-3:2020, IDT)
- SS-ISO-21250-4 - Rolling bearings - Noise testing of rolling bearing greases - Part 4: Test and evaluation method NQ (ISO 21250-4:2020, IDT)
- SS-ISO-281 - Rolling bearings - Dynamic load ratings and rating life (ISO 281:2007, IDT)
- SS-ISO-3030 - Rolling bearings Radial needle roller and cage assemblies Boundary dimensions, geometrical product specifications (GPS) and tolerance values (ISO 3030:2022, IDT)
- SS-ISO-3031 - Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Dimensions and tolerances (ISO 3031:2021, IDT)
- SS-ISO-3096 - Rolling bearings - Needle rollers - Dimensions and tolerances - Technical Corrigendum 1 (ISO 3096:1996/Cor1:1999, IDT)
- SS-ISO-5753-1 - Rolling bearings - Internal clearance - Part 1: Radial internal clearance for radial bearings (ISO 5753-1:2009, IDT)
- SS-ISO-5753-2 - Rolling bearings - Internal clearance - Part 2: Axial internal clearance for four-point-contact ball bearings (ISO 5753-2:2010, IDT)
- SS-ISO-76 - Rolling bearings - Static load ratings (Revision ISO 76:1987) (ISO 76:2006, IDT)
- SS-ISO-76-AM1 - Rolling bearings - Static load ratings Amendment 1 (ISO 76:2006/Amd 1:2017, IDT)
- SS-ISO-8443 - Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions (ISO 8443:2022, IDT)
- SS-ISO-8826-1 - Technical drawings - Rolling bearings - Part 1: General simplified representation