Document Center List of Standards on Gas Cylinders
ICS Code 23.020.35
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-EN-12245-TC - Tracked Changes. Transportable gas cylinders. Fully wrapped composite cylinders
- BS-EN-13807 - Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing
- BS-EN-13807-TC - Tracked Changes. Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing
- BS-EN-13952 - LPG equipment and accessories. Filling operations for LPG cylinders
- BS-EN-13952-TC - Tracked Changes. LPG equipment and accessories. Filling operations for LPG cylinders
- BS-EN-1439 - LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling
- BS-EN-1439-TC - Tracked Changes. LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling
- BS-EN-1442 - LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction
- BS-EN-14427-TC - Tracked Changes. LPG equipment and accessories. Transportable refillable composite cylinders for LPG. Design and construction
- BS-EN-14894-TC - Tracked Changes. LPG equipment and accessories. Cylinder and drum marking
- BS-EN-17339 - Transportable gas cylinders. Fully wrapped carbon composite cylinders and tubes for hydrogen
- BS-EN-ISO-10156 - Gas cylinders. Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
- BS-EN-ISO-10286-TC - Tracked Changes. Gas cylinders. Vocabulary
- BS-EN-ISO-10297 - Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1: Pressure drums and tubes
- BS-EN-ISO-10460 - Gas cylinders. Welded aluminium-alloy, carbon and stainless steel gas cylinders. Periodic inspection and testing
- BS-EN-ISO-10462-TC - Gas cylinders. Acetylene cylinders. Periodic inspection and maintenance
- BS-EN-ISO-11114-1 - Gas cylinders. Compatibility of cylinder and valve materials with gas contents
- BS-EN-ISO-11114-2-TC - Tracked Changes. Gas cylinders. Compatibility of cylinder and valve materials with gas contents
- BS-EN-ISO-11114-4 - Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents
- BS-EN-ISO-11114-4-TC - Tracked Changes. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents
- BS-EN-ISO-11114-5 - Gas cylinders. Compatibility of cylinder and valve materials with gas contents
- BS-EN-ISO-11120-TC - Tracked Changes. Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l. Design, construction and testing
- BS-EN-ISO-11363-1-TC - Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders
- BS-EN-ISO-11363-2-TC - Tracked Changes. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders
- BS-EN-ISO-11755 - Gas cylinders. Cylinder bundles for compressed and liquefied gases (excluding acetylene). Inspection at time of filling
- BS-EN-ISO-13338 - Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
- BS-EN-ISO-13338-TC - Tracked Changes. Gas cylinders. Gases and gas mixtures. Determination of corrosiveness for the selection of cylinder valve outlet
- BS-EN-ISO-13769-TC - Tracked Changes. Gas cylinders. Stamp marking
- BS-EN-ISO-14245-TC - Tracked Changes. Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing
- BS-EN-ISO-14246 - Gas cylinders. Cylinder valves. Manufacturing tests and examinations
- BS-EN-ISO-14246-TC - Tracked Changes. Gas cylinders. Cylinder valves. Manufacturing tests and examinations
- BS-EN-ISO-15245-1-TC - Tracked Changes. Gas cylinders. Parallel threads for connection of valves to gas cylinders
- BS-EN-ISO-15995-TC - Tracked Changes. Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated
- BS-EN-ISO-15996 - Gas cylinders. Residual pressure valves. Specification and type testing of cylinder valves incorporating residual pressure devices
- BS-EN-ISO-15996-TC - Tracked Changes. Gas cylinders. Residual pressure valves. Specification and type testing of cylinder valves incorporating residual pressure devices
- BS-EN-ISO-16964 - Gas cylinders. Flexible hoses assemblies. Specification and testing
- BS-EN-ISO-17879 - Gas cylinders. Self-closing cylinder valves. Specification and type testing
- BS-EN-ISO-18119 - Gas cylinders. Seamless steel and seamless aluminium-alloy gas cylinders and tubes. Periodic inspection and testing
- BS-EN-ISO-20475 - Gas cylinders. Cylinder bundles. Periodic inspection and testing
- BS-EN-ISO-21007-2-TC - Tracked Changes. Gas cylinders. Identification and marking using radio frequency identification technology
- BS-EN-ISO-22434-TC - Tracked Changes. Gas cylinders. Inspection and maintenance of valves
- BS-EN-ISO-23088 - Gas cylinders. Periodic inspection and testing of welded steel pressure drums. Capacities up to 1 000 l
- BS-EN-ISO-23826 - Gas cylinders. Ball valves. Specification and testing
- BS-EN-ISO-24431 - Gas cylinders. Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene). Inspection at time of filling
- BS-EN-ISO-9809-4 - Gas cylinders. Design, construction and testing of refillable seamless steel gas cylinders and tubes
- BS-ISO-11119-1 - Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes
- BS-ISO-11119-2 - Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes
- BS-ISO-11119-3 - Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes
- BS-ISO-11515-TC - Tracked Changes. Gas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing
- BS-ISO-13338 - Gas cylinders. Gases and gas mixtures. Determination of tissue corrosiveness for the selection of cylinder valve outlets
- BS-ISO-20475 - Gas cylinders. Cylinder bundles. Periodic inspection and testing
- BS-ISO-23088 - Gas cylinders. Periodic inspection and testing of welded steel pressure drums. Capacities up to 1 000 l
- BS-ISO-5145-TC - Tracked Changes. Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning
- BS-ISO-9809-4-TC - Tracked Changes. Gas cylinders. Design, construction and testing of refillable seamless steel gas cylinders and tubes
- PD-ISO-13086-2 - Gas cylinders. Guidance for design of composite cylinders
- PD-ISO-13086-3 - Gas cylinders. Guidance for design of composite cylinders
- PD-ISO-13086-4 - Gas cylinders. Guidance for design of composite cylinders
- PD-ISO-13086-5 - Gas cylinders. Information for design of composite cylinders
- PD-ISO-17519 - Gas cylinders. Refillable permanently mounted composite tubes for transportation
- PD-ISO-19016 - Gas cylinders. Cylinders and tubes of composite construction. Modal acoustic emission (MAE) testing for periodic inspection and testing
- PD-ISO-19811 - Gas cylinders. Service life testing for cylinders and tubes of composite construction
- PD-ISO-4673 - Gas cylinders. Service life performance of composite cylinders and tubes
ISO:
- ISO-10156 - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets - Corrigendum 1
- ISO-10286 - Gas cylinders - Vocabulary
- ISO-10297 - Gas cylinders - Cylinder valves - Specification and type testing
- ISO-10297-AM1 - - Amendment 1: Pressure drums and tubes
- ISO-10460 - Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing
- ISO-10461 - Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing
- ISO-10461-1 - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing - Amendment 1
- ISO-10462 - Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance
- ISO-10462-AM1 - - Amendment 1
- ISO-10464 - Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic inspection and testing
- ISO-10691 - Gas cylinders - Refillable welded steel cylinders for liquified petroleum gas (LPG) - Procedures for checking before, during and after filling
- ISO-10692-1 - Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 1: Outlet connections
- ISO-10692-2 - Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 2: Specification and type testing for valve to cylinder connections
- ISO-10961 - Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection
- ISO-11114-1 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
- ISO-11114-1-AM1 - - Amendment 1
- ISO-11114-2 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
- ISO-11114-3 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
- ISO-11114-4 - Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
- ISO-11114-5 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners
- ISO-11114-6 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing
- ISO-11117 - Gas cylinders - Valve protection caps and guards - Design, construction and tests
- ISO-11118 - Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods
- ISO-11118-AM1 - - Amendment 1
- ISO-11119-1 - Gas cylinders - Design, construction and testing of refillable composite gas cylinders and tubes - Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
- ISO-11119-2 - Gas cylinders - Design, construction and testing of refillable composite gas cylinders and tubes - Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
- ISO-11119-2-AM1 - - Amendment 1
- ISO-11119-3 - Gas cylinders - Design, construction and testing of refillable composite gas cylinders and tubes - Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners
- ISO-11119-4 - Gas cylinders - Refillable composite gas cylinders - Design, construction and testing - Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
- ISO-11120 - Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing
- ISO-11363-1 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications
- ISO-11363-2 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges
- ISO-11364 - Gas cylinders - Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system
- ISO-11372 - Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection
- ISO-11439 - Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- ISO-11439-AM1 - - Amendment 1: Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1
- ISO-11513 - Gas cylinders - Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) - Design, construction, testing, use and periodic inspection
- ISO-11515 - Gas cylinders - Refillable composite reinforced tubes of water capacity between 450 l and 3000 l - Design, construction and testing
- ISO-11621 - Gas cylinders -- Procedures for change of gas service
- ISO-11625 - Gas cylinders - Safe handling
- ISO-11755 - Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling
- ISO-12209 - Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air
- ISO-12209-AM1 - - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar
- ISO-12391-1 - Gas cylinders - Refillable seamless steel - Performance tests - Part 1: Philosophy, background and conclusions
- ISO-12391-2 - Gas cylinders - Refillable seamless steel - Performance tests - Part 2: Fracture performance tests - Monotonic burst tests
- ISO-12391-3 - Gas cylinders - Refillable seamless steel - Performance tests - Part 3: Fracture performance tests - Cyclical burst tests
- ISO-12391-4 - Gas cylinders - Refillable seamless steel - Performance tests - Part 4: Flawed-cylinder cycle test
- ISO-13086-1 - Gas cylinders - Guidance for design of composite cylinders - Part 1: Stress rupture of fibres and burst ratios related to test pressure
- ISO-13086-2 - Gas cylinders - Guidance for design of composite cylinders - Part 2: Bonfire test issues
- ISO-13086-3 - Gas cylinders - Guidance for design of composite cylinders - Part 3: Calculation of stress ratios
- ISO-13086-4 - Gas cylinders - Guidance for design of composite cylinders - Part 4: Cyclic fatigue of fibres and liners
- ISO-13086-5 - Gas cylinders - Information for design of composite cylinders - Part 5: Impact testing of composite cylinders
- ISO-13088 - Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection
- ISO-13088-AM1 - - Amendment 1
- ISO-13338 - Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet
- ISO-13341 - Gas cylinders - Fitting of valves to gas cylinders
- ISO-13341-AM1 - - Amendment 1
- ISO-13769 - Gas cylinders - Stamp marking
- ISO-13770 - Aluminium alloy gas cylinders -- Operational requirements for avoidance of neck and shoulder cracks
- ISO-14245 - Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing
- ISO-14246 - Gas cylinders - Cylinder valves - Manufacturing tests and examinations
- ISO-14246-AM1 - - Amendment 1
- ISO-14456 - Gas cylinders - Gas properties and associated classification (FTSC) codes
- ISO-14456-AM1 - - Amendment 1
- ISO-14600 - Gas cylinders -- International quality conformance system -- Basic rules
- ISO-15245-1 - Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
- ISO-15245-1-AM1 - - Amendment 1
- ISO-15245-2 - Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection
- ISO-15453 - Gas cylinders - Seamless steel and aluminium-alloy gas cylinders - Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions
- ISO-15995 - Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated
- ISO-15996 - Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices
- ISO-15996-1 - Gas cylinders - Residual pressure valves - General requirements and type testing - Amendment 1
- ISO-16115 - Gas cylinders - Classification of imperfections arising during the manufacture of seamless steel and aluminium alloy gas cylinders
- ISO-16148 - Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
- ISO-16148-AM1 - - Amendment 1
- ISO-16964 - Gas cylinders - Flexible hoses assemblies - Specification and testing
- ISO-17329 - Gas cylinders - Identification of gas cylinder manufacturer marks and their assigned radio frequency identification (RFID) codes
- ISO-17519 - Gas cylinders - Refillable permanently mounted composite tubes for transportation
- ISO-17871 - Gas cylinders - Quick-release cylinder valves - Specification and type testing
- ISO-17871-AM1 - - Amendment 1
- ISO-17879 - Gas cylinders - Self-closing cylinder valves - Specification and type testing
- ISO-18119 - Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing
- ISO-18119-AM1 - - Amendment 1
- ISO-18172-1 - Gas cylinders - Refillable welded stainless steel cylinders - Part 1: Test pressure 6 MPa and below
- ISO-18172-2 - Gas cylinders - Refillable welded stainless steel cylinders - Part 2: Test pressure greater than 6 MPa
- ISO-19016 - Gas cylinders - Cylinders and tubes of composite construction - Modal acoustic emission (MAE) testing for periodic inspection and testing
- ISO-19078 - Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
- ISO-19811 - Gas cylinders - Service life testing for cylinders and tubes of composite construction
- ISO-20475 - Gas cylinders - Cylinder bundles - Periodic inspection and testing
- ISO-20703 - Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing
- ISO-21007-1 - Gas cylinders - Identification and marking using radio frequency identification technology - Part 1: Reference architecture and terminology
- ISO-21007-2 - Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification
- ISO-21172-1 - Gas cylinders - Welded steel pressure drums up to 3 000 litres capacity for the transport of gases - Design and construction - Part 1: Capacities up to 1 000 litres
- ISO-21172-1-AM1 - - Amendment 1
- ISO-22434 - Gas cylinders - Inspection and maintenance of valves
- ISO-22435 - Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing
- ISO-22435-AM1 - Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing - Amendment 1
- ISO-22694 - Gas cylinders - Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing
- ISO-22991 - Gas cylinders - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction
- ISO-23088 - Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l
- ISO-23826 - Gas cylinders - Ball valves - Specification and testing
- ISO-23876 - Gas cylinders - Cylinders and tubes of composite construction - Acoustic emission examination (AT) for periodic inspection and testing
- ISO-24431 - Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling
- ISO-25760 - Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders
- ISO-3500 - Gas cylinders - Seamless steel CO2 cylinders for fixed fire-fighting installations on ships
- ISO-3500-AM1 - Seamless steel CO2 cylinders for fixed fire-fighting installations on ships - Amendment 1
- ISO-3807 - Gas cylinders - Acetylene cylinders - Basic requirements and type testing
- ISO-4673 - Gas cylinders - Service life performance of composite cylinders and tubes
- ISO-4706 - Gas cylinders - Refillable welded steel cylinders - Test pressure 60 bar and below
- ISO-5145 - Gas cylinders - Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning
- ISO-6406 - Gas cylinders - Seamless steel gas cylinders - Periodic inspection and testing
- ISO-7225 - Gas cylinders - Precautionary labels
- ISO-7225-AM1 - Gas cylinders - Precautionary labels - Amendment 1
- ISO-7470 - Valve outlets for gas cylinders -- List of provisions which are either standardized or in use
- ISO-7866 - Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing
- ISO-7866-AM1 - - Amendment 1
- ISO-9809-1 - Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa
- ISO-9809-2 - Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa
- ISO-9809-3 - Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 3: Normalized steel cylinders and tubes
- ISO-9809-4 - Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa
Other SDOs:
- EN-13807 - Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
- EN-13952 - LPG equipment and accessories - Filling operations for LPG cylinders
- EN-1439 - LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
- EN-1442 - LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
- EN-ISO-10156 - Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
- EN-ISO-10297 - Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1: Pressure drums and tubes
- EN-ISO-10460 - Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing
- EN-ISO-11114-1 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1
- EN-ISO-11114-4 - Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
- EN-ISO-12209 - Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar
- EN-ISO-14246 - Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1
- EN-ISO-15996 - Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices
- EN-ISO-17879 - Gas cylinders - Self-closing cylinder valves - Specification and type testing
- EN-ISO-18119 - Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO 18119:2018)
- EN-ISO-24431 - Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling
- SIS-CEN/TR-14473 - Transportable gas cylinders - Porous materials for acetylene cylinders
- SIS-CEN/TS-16769 - LPG equipment and accessories - Terminology
- SIS-ISO-13086-5 - Gas cylinders Guidance for design of composite cylinders Part 5: Impact testing of composite cylinders (ISO/TR 13086-5:2022, IDT)
- SIS-ISO-17519 - Gas cylinders - Refillable permanently mounted composite tubes for transportation
- SIS-ISO-19016 - Gas cylinders - Cylinders and tubes of composite construction - Modal acoustic emission (MAE) testing for periodic inspection and testing (ISO/TS 19016:2019, IDT)
- SIS-ISO/TR-19811 - Gas cylinders - Service life testing for cylinders and tubes of composite construction (ISO/TR 19811, IDT)
- SIS-ISO/TR-4673 - Gas cylinders - Service life performance of composite cylinders and tubes (ISO/TR 4673:2022, IDT)
- SS-3639 - Gas cylinder with syphone tube - Marking
- SS-EN-1089-3 - Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding
- SS-EN-12245 - Transportable gas cylinders - Fully wrapped composite cylinders
- SS-EN-12257 - Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders
- SS-EN-12493 - LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
- SS-EN-12542 - LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
- SS-EN-12561-3 - Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
- SS-EN-12805 - Automotive LPG components - Containers
- SS-EN-12807 - LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
- SS-EN-12816 - LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
- SS-EN-12817 - LPG Equipment and accessories - Inspection and requalification of LPG pressure vessels up to and including 13 m³
- SS-EN-12819 - LPG equipment and accessories - Inspection and requalification of LPG pressure vessels greater than 13 m³
- SS-EN-12862 - Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
- SS-EN-13096 - Transportable gas cylinders - Conditions for filling gases into receptacles - Single component gases
- SS-EN-13099 - Transportable gas cylinders - Conditions for filling gas mixtures into receptacles
- SS-EN-13109 - LPG equipment and accessories - LPG tanks and drums - Disposal
- SS-EN-13110 - LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
- SS-EN-13160-5 - Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
- SS-EN-13293 - Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide
- SS-EN-13322-1 - Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel
- SS-EN-13322-1-AM1 - Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel
- SS-EN-13322-2 - Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel
- SS-EN-13322-2-AM1 - Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel
- SS-EN-13365 - Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling
- SS-EN-13365-AM1 - Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling
- SS-EN-13385 - Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling
- SS-EN-13445-3 - Unfired pressure vessels - Part 3: Design
- SS-EN-13720 - Transportable gas cylinders - Filling conditions for acetylene battery vehicles
- SS-EN-13807 - Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
- SS-EN-13952 - LPG equipment and accessories - Filling operations for LPG cylinders
- SS-EN-13952-AM1 - LPG equipment and accessories - Filling procedures for LPG cylinders
- SS-EN-13999-1 - Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure
- SS-EN-14140 - LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
- SS-EN-14208 - Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
- SS-EN-1439 - LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling
- SS-EN-1440 - LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection
- SS-EN-1442 - LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
- SS-EN-14427 - LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
- SS-EN-14513 - Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders)
- SS-EN-14570 - LPG equipment and accessories - Equipping of overground and underground LPG vessels
- SS-EN-14638-1 - Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
- SS-EN-14638-3 - Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
- SS-EN-14876 - Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
- SS-EN-14893 - LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
- SS-EN-14894 - LPG equipment and accessories - Cylinder and drum marking
- SS-EN-15330-1 - Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use
- SS-EN-15888 - Transportable gas cylinders - Cylinder bundles - Periodic inspection and testing
- SS-EN-16509 - Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing
- SS-EN-16603-20-21 - Space engineering - Interface requirements for electrical actuators
- SS-EN-16728 - LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection
- SS-EN-16753 - Gas cylinders - Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases
- SS-EN-17339 - Transportable gas cylinders - Fully wrapped carbon composite cylinders and tubes for hydrogen
- SS-EN-17476 - Specifications for dedicated liquefied petroleum gas appliances - LPG vapour pressure appliances incorporating a horizontal cartridge in the chassis
- SS-EN-1802 - Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
- SS-EN-1803 - Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
- SS-EN-1919 - Transportable gas cylinders - Cylinders for liquified gases (excluding acetylene and LPG) - Inspection at time of filling
- SS-EN-1920 - Transportable gas cylinders - Cylinders for compressed gases (excluding acetylene) - Inspection at time of filling
- SS-EN-1964-3 - Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa
- SS-EN-1968 - Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
- SS-EN-1968-AM1 - Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders
- SS-EN-417 - Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
- SS-EN-720-1 - Transportable gas cylinders - Gases and gas mixtures - Part 1: Properties of pure gases
- SS-EN-834 - Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply
- SS-EN-850 - Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use
- SS-EN-ISO-10156 - Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2017)
- SS-EN-ISO-10286 - Gas cylinders - Vocabulary (ISO 10286:2021)
- SS-EN-ISO-10297 - Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01)
- SS-EN-ISO-10297-AM1 - Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1: Pressure drums and tubes (ISO 10297:2014/Amd 1:2017)
- SS-EN-ISO-10460 - Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing (ISO 10460:2018, Corrected version 2019-04)
- SS-EN-ISO-10462 - Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013)
- SS-EN-ISO-10462-AM1 - Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment 1 (ISO 10462:2013/Amd 1:2019)
- SS-EN-ISO-10692-1 - Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001)
- SS-EN-ISO-10692-2 - Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2: Specification and type testing for valve to cylinder (ISO 10692-2:2001)
- SS-EN-ISO-10961 - Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019)
- SS-EN-ISO-11114-1 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020)
- SS-EN-ISO-11114-1-AM1 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017)
- SS-EN-ISO-11114-2 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2021)
- SS-EN-ISO-11114-3 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
- SS-EN-ISO-11114-4 - Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
- SS-EN-ISO-11114-5 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022)
- SS-EN-ISO-11114-6 - Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022)
- SS-EN-ISO-11117 - Gas cylinders - Valve protection caps and guards - Design, construction and tests (ISO 11117:2019)
- SS-EN-ISO-11118 - Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015)
- SS-EN-ISO-11120 - Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015)
- SS-EN-ISO-11363-1 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
- SS-EN-ISO-11363-2 - Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11363-2:2017)
- SS-EN-ISO-11372 - Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011)
- SS-EN-ISO-11439 - Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013)
- SS-EN-ISO-11439-AM1 - Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles - Amendment 1 (ISO 11439:2013/Amd 1:2021)
- SS-EN-ISO-11621 - Gas cylinders - Procedures for change of gas service (ISO 11621:1997)
- SS-EN-ISO-11623 - Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02)
- SS-EN-ISO-11755 - Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 11755:2005)
- SS-EN-ISO-12209 - Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013)
- SS-EN-ISO-12209-AM1 - Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar (ISO 12209:2013/Amd 1:2016), Corrected version 2017-03
- SS-EN-ISO-13088 - Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011)
- SS-EN-ISO-13088-AM1 - Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection - Amendment 1 (ISO 13088:2011/Amd 1: 2020)
- SS-EN-ISO-13338 - Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
- SS-EN-ISO-13341 - Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2010)
- SS-EN-ISO-13341-AM1 - Gas cylinders - Fitting of valves to gas cylinders - Amendment 1 (ISO 13341:2010/Amd 1:2015)
- SS-EN-ISO-13769 - Gas cylinders - Stamp marking (ISO 13769:2018)
- SS-EN-ISO-14245 - Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2021)
- SS-EN-ISO-14246 - Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2022)
- SS-EN-ISO-14246-AM1 - Gas cylinders - Cylinder valves - Manufacturing tests and examinations - Amendment 1 (ISO 14246:2014/Amd 1:2017)
- SS-EN-ISO-14456 - Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015)
- SS-EN-ISO-14456-AM1 - Gas cylinders - Gas properties and associated classification (FTSC) codes - Amendment 1 (ISO 14456:2015/Amd 1:2019)
- SS-EN-ISO-15245-1 - Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2021)
- SS-EN-ISO-15245-1-AM1 - Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001/Amd 1:2013)
- SS-EN-ISO-15245-2 - Gas cylinders - Parallel threads for connection of valves go gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001)
- SS-EN-ISO-15995 - Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2021)
- SS-EN-ISO-15996 - Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017)
- SS-EN-ISO-15996-AM1 - Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005/Amd 1:2007)
- SS-EN-ISO-16148 - Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016)
- SS-EN-ISO-16148-AM1 - Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing - Amendment 1 (ISO 16148:2016/Amd 1:2020)
- SS-EN-ISO-16964 - Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019)
- SS-EN-ISO-17871 - Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
- SS-EN-ISO-17871-AM1 - Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2015/Amd 1:2018)
- SS-EN-ISO-17879 - Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
- SS-EN-ISO-18119 - Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing
- SS-EN-ISO-18119-AM1 - Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
- SS-EN-ISO-19901-2 - Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2022)
- SS-EN-ISO-20475 - Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018)
- SS-EN-ISO-21007-1 - Gas cylinders - Identification and marking using radio frequency identification technology - Part 1: Reference architecture and terminology (ISO 21007-1:2005)
- SS-EN-ISO-21007-2 - Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2015)
- SS-EN-ISO-21572 - Foodstuffs - Molecular biomarker analysis - Immunochemical methods for the detection and quantification of proteins (ISO 21572:2019)
- SS-EN-ISO-22434 - Gas cylinders - Inspection and maintenance of valves (ISO 22434:2022)
- SS-EN-ISO-22435 - Gas cylinders - Cylinder valves with integrated pressure regulator - Specification and type testing
- SS-EN-ISO-22435-AM1 - Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007/Amd 1:2012)
- SS-EN-ISO-23088 - Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020)
- SS-EN-ISO-23826 - Gas cylinders - Ball valves - Specification and testing (ISO 23826:2021)
- SS-EN-ISO-24431 - Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016)
- SS-EN-ISO-25760 - Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009)
- SS-EN-ISO-3807 - Gas cylinders - Acetylene cylinders - Basic requirements and type testing (ISO 3807:2013, Corrected version 2014-11-01)
- SS-EN-ISO-7225 - Gas cylinders - Precautionary labels (ISO 7225:2005)
- SS-EN-ISO-7225-AM1 - Gas cylinders - Precautionary labels (ISO 7225:2005/Amd 1:2012)
- SS-EN-ISO-7866 - Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
- SS-EN-ISO-7866-AM1 - Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1 (ISO 7866:2012/Amd 1:2020)
- SS-EN-ISO-9809-1 - Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa (ISO 9809-1:2019)
- SS-EN-ISO-9809-2 - Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2019)
- SS-EN-ISO-9809-3 - Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 3: Normalized steel cylinders and tubes (ISO 9809-3:2019)
- SS-EN-ISO-9809-4 - Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa (ISO 9809-4:2021)
- SS-ISO-10460 - Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and testing (ISO 10460:2005, IDT)
- SS-ISO-10461 - Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing (ISO 10461:2005, IDT)
- SS-ISO-10461-AM1 - Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing (ISO 10461:2005/Amd 1, IDT)
- SS-ISO-10464 - Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic inspection and testing (ISO 10464:2004, IDT)
- SS-ISO-10656 - Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016, IDT)
- SS-ISO-10691 - Gas cylinders - Refillable welded steel cylinders for liquified petroleum gas (LPG) - Procedures for checking before, during and after filling (ISO 10691:2004, IDT)
- SS-ISO-11119-1 - Gas cylinders Design, construction and testing of refillable composite gas cylinders and tubes Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l (ISO 11119-1:2020, IDT)
- SS-ISO-11119-2 - Gas cylinders Design, construction and testing of refillable composite gas cylinders and tubes Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners (ISO 11119-2:2020, IDT)
- SS-ISO-11119-2-AM1 - Gas cylinders - Refillable composite gas cylinders and tubes - Design, construction and testing - Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners (ISO 11119-2:2012/Amd 1:2014, IDT)
- SS-ISO-11119-3 - Gas cylinders Design, construction and testing of refillable composite gas cylinders and tubes Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners (ISO 11119-3:2020, IDT)
- SS-ISO-11119-4 - Gas cylinders - Refillable composite gas cylinders - Design, construction and testing - Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners (ISO 11119-4:2016, IDT)
- SS-ISO-11515 - Gas cylinders Refillable composite reinforced tubes of water capacity between 450 l and 3000 l Design, construction and testing (ISO 11515:2022, IDT)
- SS-ISO-11625 - Gas cylinders - Safe handling (ISO 11625:2007, IDT)
- SS-ISO-11755 - Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 11755:2005, IDT)
- SS-ISO-16964 - Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019, IDT)
- SS-ISO-18172-1 - Gas cylinders - Refillable welded stainless steel cylinders - Part 1: Test pressure 6 MPa and below (ISO 18172-1:2007, IDT)
- SS-ISO-18172-2 - Gas cylinders - Refillable welded stainless steel cylinders - Part 2: Test pressure greater than 6 MPa (ISO 18172-2:2007, IDT)
- SS-ISO-19078 - Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 19078:2013, IDT)
- SS-ISO-20475 - Gas cylinders - Cylinder bundles - Periodic inspection and testing (ISO 20475:2018, IDT)
- SS-ISO-21172-1 - Gas cylinders - Welded steel pressure drums up to 3 000 litres capacity for the transport of gases - Design and construction - Part 1: Capacities up to 1 000 litres (ISO 21172-1:2015, IDT)
- SS-ISO-21172-1-AM1 - Gas cylinders - Welded steel pressure drums up to 3 000 litres capacity for the transport of gases - Design and construction - Part 1: Capacities up to 1 000 litres (ISO 21172-1:2015/Amd 1:2018, IDT)
- SS-ISO-21894 - Air cargo - Cargo stopper devices - Design and testing (ISO 21894:2020, IDT)
- SS-ISO-22434 - Transportable gas cylinders - Inspection and maintenance of cylinder valves (ISO 22434:2006, IDT)
- SS-ISO-23088 - Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020, IDT)
- SS-ISO-23876 - Gas cylinders Cylinders and tubes of composite construction Acoustic emission examination (AT) for periodic inspection and testing (ISO 23876:2022, IDT)
- SS-ISO-24431 - Gas cylinders - Cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2006, IDT)
- SS-ISO-3500 - Gas cylinders - Seamless steel CO2 cylinders for fixed fire-fighting installation on ships (ISO 3500:2005, IDT)
- SS-ISO-3500-AM1 - Gas cylinders - Seamless steel CO2 cylinders for fixed fire-fighting installation on ships (ISO 3500:2005/Amd 1:2010, IDT)
- SS-ISO-4395 - Fluid power systems and components - Cylinder piston rod end types and dimensions (ISO 4395:2009, IDT)
- SS-ISO-5145 - Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning (ISO 5145:2017, IDT)
- SS-ISO-6406 - Gas cylinders - Seamless steel gas cylinders - Perodic inspection and testing (ISO 6406:2005, IDT)
- SS-ISO-9809-4 - Gas cylinders Design, construction and testing of refillable seamless steel gas cylinders and tubes Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa (ISO 9809-4:2021, IDT)
- SS-ISO/IEC-15459-3 - Information technology - Unique identifiers - Part 3: Common rules for unique identifiers (ISO/IEC 15459-3:2014, IDT)