Document Center List of Standards on Metal Fittings
ICS Code 23.040.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1109 - Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
- ASTM-A126 - Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
- ASTM-A182 - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM-A234 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
- ASTM-A338 - Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy-Duty Service at Temperatures Up to 650 °F (345 °C)
- ASTM-A350 - Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM-A403 - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
- ASTM-A420 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
- ASTM-A500 - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
- ASTM-A501 - Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
- ASTM-A511 - Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
- ASTM-A519 - Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
- ASTM-A520 - Standard Specification for Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction (Withdrawn 2000)
- ASTM-A522 - Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
- ASTM-A554 - Standard Specification for Welded Stainless Steel Mechanical Tubing
- ASTM-A608 - Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
- ASTM-A618 - Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
- ASTM-A632 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
- ASTM-A652 - Specification for Special Requirements for Wrought Steel Welding Fittings for Nuclear and Other Special Applications (Withdrawn 1983)
- ASTM-A669 - Specification for Seamless Ferritic-Austenitic Alloy Steel Tubes (Withdrawn 1983)
- ASTM-A733 - Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
- ASTM-A74 - Standard Specification for Cast Iron Soil Pipe and Fittings
- ASTM-A758 - Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
- ASTM-A771 - Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components
- ASTM-A778 - Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
- ASTM-A787 - Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
- ASTM-A789 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
- ASTM-A791 - Specification for Aluminum-Zinc Alloy-Coated Wire Strand (Withdrawn 1995)
- ASTM-A815 - Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
- ASTM-A826 - Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components (Withdrawn 2004)
- ASTM-A847 - Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
- ASTM-A858 - Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
- ASTM-A860 - Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
- ASTM-A861 - Standard Specification for High-Silicon Iron Pipe and Fittings
- ASTM-A960 - Standard Specification for Common Requirements for Wrought Steel Piping Fittings
- ASTM-A988 - Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
- ASTM-B361 - Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
- ASTM-B366 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
- ASTM-C1277 - Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
- ASTM-F1807 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
- ASTM-F1948 - Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
- ASTM-F1961 - Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing (Withdrawn 2018)
- ASTM-F1974 - Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
- ASTM-F2080 - Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
- ASTM-F2098 - Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
- ASTM-F423 - Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)
- ASTM-F491 - Standard Specification for Poly(Vinylidene Fluoride) (PVDF) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)
- ASTM-F492 - Standard Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
- ASTM-F546 - Standard Specification for Perfluoro (Ethylene-Propylene) Copolymer (FEP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2002)
- ASTM-F599 - Standard Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
- ASTM-F626 - Standard Specification for Fence Fittings
- ASTM-F682 - Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
- ASTM-F781 - Standard Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
BSI:
- BS-1306 - Specification for copper and copper alloy pressure piping systems
- BS-143 - Threaded Pipe Fittings in Malleable Cast Iron & Cast Copperalloy
- BS-143-&-1256 - Threaded pipe fittings in malleable cast iron and cast copper alloy
- BS-1965-1 - Carbon Steel
- BS-2035 - Specification for cast iron flanged pipes and flanged fittings
- BS-2051-1 - Tube and pipe fittings for engineering purposes. Copper and copper alloys capillary and compression tube fittings for engineering purposes
- BS-2051-2 - Tube and pipe fittings for engineering purposes. Specification for olive type copper alloy compression tube fittings
- BS-437 - Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems
- BS-4622 - Specification for grey iron pipes and fittings
- BS-4772 - Specification for ductile iron pipes and fittings
- BS-6739 - Instrumentation in process control systems: installation design and practice. Code of practice
- BS-78-2 - Specification for cast iron spigot and socket pipes (vertically cast) and spigot and socket fittings. Fittings
- BS-8561 - Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods
- BS-8561-TC - Tracked Changes. Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods
- BS-864-2 - Capillary and compression tube fittings of copper and copper alloy. Specification for capillary and compression fittings for copper tubes
- BS-864-3 - Capillary and compression tube fittings of copper and copper alloy. Compression fittings for polyethylene pipes
- BS-864-5 - Capillary and compression tube fittings of copper and copper alloy. Specification for compression fittings for polyethylene pipes with outside diameters to BS 5556
- BS-EN-10241 - Steel threaded pipe fittings
- BS-EN-10242 - Threaded pipe fittings in malleable cast iron
- BS-EN-10253-1 - Butt-welding pipe fittings
- BS-EN-10253-2 - Butt-welding pipe fittings
- BS-EN-10253-3 - Butt-welding pipe fittings
- BS-EN-10253-4 - Butt-welding pipe fittings
- BS-EN-10284 - Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
- BS-EN-10288 - Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
- BS-EN-10298 - Steel tubes and fittings for onshore and offshore pipelines. Internal lining with cement mortar
- BS-EN-10329 - Steel tubes and fittings for onshore and offshore pipelines. External field joint coatings
- BS-EN-10374 - Welded fittings for the food and chemical industries. Tees, bends and reducers for welding
- BS-EN-1123-2 - Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems
- BS-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems
- BS-EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems
- BS-EN-1124-3 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems
- BS-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems
- BS-EN-1254-2 - Copper and copper alloys. Plumbing fittings
- BS-EN-1254-6 - Copper and copper alloys. Plumbing fittings
- BS-EN-1254-8 - Copper and copper alloys. Plumbing fittings
- BS-EN-12842 - Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
- BS-EN-14628 - Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods
- BS-EN-14628-1 - Ductile iron pipes, fittings and accessories. Requirements and test methods
- BS-EN-14870-1 - Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems
- BS-EN-14870-2 - Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Fittings
- BS-EN-14901 - Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods
- BS-EN-14901-1 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic coatings of ductile iron fittings and accessories
- BS-EN-14901-2 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic coatings of ductile iron fittings and accessories
- BS-EN-15655 - Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods
- BS-EN-15655-1 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings
- BS-EN-15655-2 - Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings
- BS-EN-448 - District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
- BS-EN-545 - Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
- BS-EN-598 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
- BS-EN-877 - Cast iron pipe systems and their components for the evacuation of water from works. characteristics and test methods
- BS-EN-969 - Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
- BS-ISO-10838-2 - Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels
- PD-CEN-15545 - Guide to the use of EN 545
- PD-CEN-16017 - Guide to the use of EN 598
- PD-CEN-16470 - Environmental aspects of ductile iron pipe systems for water and sewerage applications
- PD-CEN-16950 - Ductile iron pipes, fittings and accessories. Sanitary characteristics and test methods
- PD-CEN-17996 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Guidelines for Pipelines Installation
ISO:
- ISO-13 - Grey iron pipes, special castings and grey iron parts for pressure main lines
- ISO-2016 - Capillary solder fittings for copper tubes -- Assembly dimensions and tests
- ISO-3419 - Non-alloy and alloy steel butt-welding fittings
- ISO-3545-3 - Steel tubes and fittings -- Symbols for use in specifications -- Part 3: Tubular fittings with circular cross-section
- ISO-4144 - Pipework - Stainless steel fittings threaded in accordance with ISO 7-1
- ISO-4145 - Non-alloy steel fittings threaded to ISO 7-1
- ISO-49 - Malleable cast iron fittings threaded to ISO 7-1
- ISO-49-AM1 - - Amendment 1: Chemical composition of the zinc coating - adjustment to actual requirements regarding hazardous substances
- ISO-5251 - Stainless steel butt-welding fittings
- ISO-5256 - Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials
- ISO-6761 - Steel tubes -- Preparation of ends of tubes and fittings for welding
Other SDOs:
- DIN-2430-1 - Part 1: Pipes & Elbows, Piping for Pigging Systems
- DIN-EN-10224 - Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10224:2002 + A1:2005
- DIN-EN-10288 - Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings
- DIN-EN-10298 - Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005
- DIN-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
- DIN-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2013
- DIN-EN-14628 - Ductile Iron Pipes, Fittings & Accessories - External Polyethylene Coating for Pipes -
- DIN-EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods; German version EN 14901:2014
- DIN-EN-448 - District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 448:2015
- DIN-EN-545 - Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
- DIN-EN-877/A1 - Cast Iron Pipes & Fittings, Their Joints & Accessories for the Evacuation of Water Fro
- DIN-EN-ISO-19879 - Metallic Tube Connections for Fluid Power & General Use - Test Methods for Hydraulic F
- EN-10224 - Non-Alloy Steel Tubes & Fittings for the Conveyance of Water & Aqueous Liquids, Techni
- EN-10253-2 - Butt-Welding Pipe Fittings, Non Alloy & Ferritic Alloy Steels With Specific Inspection
- EN-10253-3 - Butt-Welding Pipe Fittings, Wrought Austenitic & AUSTENITIC-Ferritic (Duplex) Stainles
- EN-10253-4 - Part 4: Wrought Austenitic & AUSTENITIC-Ferritic (Duplex) Stainless Steels With Specif
- EN-10284 - Malleable Cast Iron Fittings With Compression Ends for Polyethylene (Pe) Piping System
- EN-10288 - Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
- EN-10298 - Steel Tubes & Fittings for on Shore & Offshore Pipelines - Internal Lining With Cement
- EN-1123-2 - Part 2: Dimensions, Pipes & Fittings of Longitudinally Welded Hot-Dip Galvanized Steel
- EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
- EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
- EN-1124-3 - Part 3: System X - Dimensions, Pipes & Fittings of Longitudinally Welded Stainless Ste
- EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
- EN-1254-6 - Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends
- EN-1254-8 - Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes
- EN-12842 - Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
- EN-14628 - Ductile Iron Pipes, Fittings & Accessories - External Polyethylene Coating for Pipes -
- EN-14870-1 - Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
- EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
- EN-15655 - Ductile Iron Pipes, Fittings & Accessories - Internal Polyurethane Lining for Pipes &
- EN-15655-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
- EN-448 - District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
- EN-545 - Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
- EN-598 - Ductile Iron Pipes, Fittings, Accessories & Their Joints for Sewerage Applications - R
- EN-877 - Cast Iron Pipes & Fittings, Their Joints & Accessories for the Evacuation of Water Fro
- EN-877/A1 - Cast Iron Pipes and Fittings, Their Joints and Accessories for the Evacuation of Water Fro
- EN-969 - Ductile Iron Pipes, Fittings, Accessories & Their Joints for Gas Pipelines - Requireme
- JIS-B-0151 - Iron and steel pipe fittings -- Vocabulary
- JIS-B-2301 - Screwed type malleable cast iron pipe fittings
- JIS-B-2302 - Screwed type steel pipe fittings
- JIS-B-2308 - Stainless steel threaded fittings
- JIS-B-2309 - Butt-welding pipe fittings for light gauge stainless steel tubes for ordinary use
- JIS-B-2311 - Steel butt-welding pipe fittings for ordinary use
- JIS-B-2312 - Steel butt-welding pipe fittings
- JIS-B-2313 - Steel plate butt-welding pipe fittings
- JIS-B-2316 - Steel socket-welding pipe fittings
- JIS-B-2321 - Aluminium and aluminium alloy butt-welding pipe fittings
- SMS-1229 - Valves and fittings for pipe lines. Reduction of flow passage
- SMS-1236 - Fittings for piping. Wrench grip
- SMS-1237 - Fittings for piping. Female ended valves. End-to-end dimensions
- SMS-1276 - Pipe line fittings. Drain plug
- SMS-333 - Pipe lines. Pressure and temperature limits for pipe, flanges and fittings
- SS-1257 - Fittings for piping - Internally threaded long connections with pipe threads ISO 228-1-G
- SS-EN-10224 - Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
- SS-EN-10224-AM1 - Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions
- SS-EN-10241 - Steel threaded pipe fittings
- SS-EN-10242 - Threaded pipe fitting in malleable cast iron
- SS-EN-10242-AM1 - Threaded pipe fitting in malleable cast iron
- SS-EN-10242-AM2 - Threaded pipe fittings in malleable cast iron
- SS-EN-10253-1 - Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements
- SS-EN-10253-2 - Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
- SS-EN-10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
- SS-EN-10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
- SS-EN-10288 - Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
- SS-EN-10298 - Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar
- SS-EN-10374 - Welded fittings for the food and chemical industries - Tees, bends and reducers for welding
- SS-EN-1123-1 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1123-1-AM1 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1123-2 - Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
- SS-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
- SS-EN-1124-1 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1124-1-AM1 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
- SS-EN-1124-3 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
- SS-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
- SS-EN-1254-1 - Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes
- SS-EN-1254-2 - Copper and copper alloys - Plumbing fittings - Part 2: Compression fittings for use with copper tubes
- SS-EN-1254-20 - Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
- SS-EN-1254-3 - Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes
- SS-EN-1254-4 - Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings
- SS-EN-1254-5 - Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with short ends for brazing to copper tubes
- SS-EN-1254-6 - Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes
- SS-EN-1254-7 - Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes
- SS-EN-1254-8 - Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes
- SS-EN-12842 - Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
- SS-EN-14419 - District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Surveillance systems
- SS-EN-14628 - Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods
- SS-EN-14628-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings
- SS-EN-14870-1 - Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2018, modified)
- SS-EN-14870-2 - Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003, modified)
- SS-EN-14901 - Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods
- SS-EN-14901-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
- SS-EN-14901-2 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
- SS-EN-15030 - Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use
- SS-EN-15655 - Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
- SS-EN-15655-1 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
- SS-EN-15655-2 - Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
- SS-EN-15698-2 - District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
- SS-EN-448 - District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
- SS-EN-545 - Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
- SS-EN-598 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
- SS-EN-640 - Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
- SS-EN-641 - Reinforced concrete pressure pipes, cylinder type, including joints and fittings
- SS-EN-877 - Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
- SS-EN-877-AM1 - Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
- SS-EN-969 - Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
- SS-EN-969-AM1 - Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods
- SS-EN-ISO-20361 - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)
- SS-ISO-5211-1 - Part-turn valve actuator attachment - Part 1: Flange dimensions
- SS-ISO-5211-2 - Part-turn valve actuator attachment - Part 2: Flange and coupling performance characteristics
- SS-ISO-5211-3 - Part-turn valve actuator attachment - Part 3: Dimensions of driving components