Document Center List of Standards on Flanges, Couplings And Joints
ICS Code 23.040.60
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1056 - Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
- ASTM-A126 - Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
- ASTM-A182 - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM-A707 - Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
- ASTM-A865 - Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
- ASTM-B687 - Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
- ASTM-C1129 - Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
- ASTM-C1173 - Standard Specification for Flexible Transition Couplings for Underground Piping Systems
- ASTM-C1460 - Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
- ASTM-C1540 - Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
- ASTM-C1541 - Standard Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings (Withdrawn 2022)
- ASTM-C1644 - Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
- ASTM-C425 - Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
- ASTM-D4024 - Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
- ASTM-D4161 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
- ASTM-D5421 - Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
- ASTM-E3101 - Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints
- ASTM-E3102 - Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
- ASTM-F1054 - Standard Specification for Conical Fittings (Withdrawn 2005)
- ASTM-F1076 - Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
- ASTM-F1120 - Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
- ASTM-F1122 - Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
- ASTM-F1123 - Standard Specification for Non-Metallic Expansion Joints
- ASTM-F1311 - Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
- ASTM-F1429 - Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
- ASTM-F1476 - Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
- ASTM-F1747 - Test Method for External Fixator Joints (Withdrawn 2000)
- ASTM-F1986 - Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020)
- ASTM-F1987 - Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020)
- ASTM-F2014 - Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
- ASTM-F2015 - Standard Specification for Lap Joint Flange Pipe End Applications
- ASTM-F3110 - Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints
- ASTM-F3124 - Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings
BSI:
- BS-10 - Specification for flanges and bolting for pipes, valves and fittings
- BS-1560-3.1 - Circular Flanges for Pipes, Valves & Fittings (Class Designated), Steel, Cast Iron & C
- BS-1560-3.2 - Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges
- BS-1560-3.3 - Circular Flanges for Pipes, Valves & Fittings (Class Designated), Steel, Cast Iron & C
- BS-1782 - Specification for couplings for suction and delivery hose (1 in. to 8 in. nominal sizes) other than fire hose couplings
- BS-1906 - Specification for hose couplings (air and water) ( in. to 1 in. nominal sizes)
- BS-4346-2 - Joints and fittings for use with unplasticized PVC pressure pipes. Mechanical joints and fittings, principally of unplasticized PVC
- BS-4346-3 - Joints and fittings for use with unplasticized PVC pressure pipes. Specification for solvent cement
- BS-4368-1 - Metallic tube connectors for fluid power and general use
- BS-4504-2 - Circular flanges for pipes, valves and fittings (PN designated). Copper alloy and composite flanges
- BS-4504-3.1 - Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges. Specification for steel flanges
- BS-4504-3.3 - Circular flanges for pipes, valves and fittings (PN designated). Specification for copper alloy and composite flanges
- BS-4504-3-3.2 - Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges. Specification for cast iron flanges
- BS-4882 - Specification for bolting for flanges and pressure containing purposes
- BS-5114 - Specification for performance requirements for joints and compression fittings for use with polyethylene pipes
- BS-5315 - Hose clamps (worm drive type) for general purpose use (metric series)
- BS-EN-10311 - Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
- BS-EN-1092-1 - Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
- BS-EN-1092-2-TC - Tracked Changes. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
- BS-EN-1092-3 - Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated
- BS-EN-1119 - Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
- BS-EN-1123-2 - Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems
- BS-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems
- BS-EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems
- BS-EN-12220 - Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation
- BS-EN-12734 - Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing
- BS-EN-12760 - Industrial valves. Socket welding ends for steel valves
- BS-EN-12760-TC - Tracked Changes. Industrial valves. Socket welding ends for steel valves
- BS-EN-13081 - Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler
- BS-EN-13083 - Tanks for transport of dangerous goods. Service equipment for tanks. Adaptor for bottom loading and unloading
- BS-EN-13221 - High-pressure flexible connections for use with medical gases
- BS-EN-13555 - Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- BS-EN-1449 - Plastics piping systems. Glass reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints
- BS-EN-1450 - Plastics Piping Systems. Glass-Reinforced Thermosetting Plastics (Grp) Components. Tes
- BS-EN-14525 - Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
- BS-EN-14525-TC - Tracked Changes. Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
- BS-EN-14772 - Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
- BS-EN-14870-1 - Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems
- BS-EN-14870-3 - Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Flanges
- BS-EN-1515-1 - Flanges and their joints. Bolting
- BS-EN-1515-3 - Flanges and their joints. Bolting
- BS-EN-1515-4 - Flanges and their joints. Bolting
- BS-EN-1591-1 - Flanges and their joints. Design rules for gasketed circular flange connections
- BS-EN-1591-1-TC - Tracked Changes. Flanges and their joints. Design rules for gasketed circular flange connections
- BS-EN-1591-2 - Flanges and their joints. Design rules for gasketed circular flange connections
- BS-EN-1591-4 - Flanges and their joints
- BS-EN-16397-1 - Flexible couplings
- BS-EN-16397-2 - Flexible couplings
- BS-EN-489-1 - District heating pipes. Bonded single and twin pipe systems for buried hot water networks
- BS-EN-712 - Thermoplastics piping systems. End-load bearing mechanical joints between pressure pipes and fittings. Test method for resistance to pull-out under constant longitudinal force
- BS-EN-713 - Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
- BS-EN-715 - Thermoplastics piping systems. End-load-bearing joints between small diameter pressure pipes and fittings. Test method for leaktightness under internal water pressure, including end thrust
- BS-EN-737-1 - Part 1: Terminal Units for Compressed Medical Gases & Vacuum, Medical Gas Pipeline Systems
- BS-EN-911 - Plastics piping systems. Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping. Test method for leaktightness under external hydrostatic pressure
- BS-EN-ISO-13844 - Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes. Test method for leak tightness under negative pressure, angular deflection and deformation
- BS-EN-ISO-13845 - Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
- BS-EN-ISO-13845-TC - Tracked Changes. Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
- BS-EN-ISO-13846 - Plastics piping systems. End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping. Test method for long-term leaktightness under internal water pressure
- BS-EN-ISO-19879 - Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
- BS-EN-ISO-19879-TC - Tracked Changes. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
- BS-EN-ISO-19892 - Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
- BS-EN-ISO-21969 - High-pressure flexible connections for use with medical gas systems
- BS-EN-ISO-27509 - Petroleum and natural gas industries. Compact flanged connections with IX seal ring
- BS-EN-ISO-3458 - Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure
- BS-EN-ISO-3459 - Plastic piping systems. Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- BS-EN-ISO-3459-TC - Tracked Changes. Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure
- BS-EN-ISO-3501 - Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force
- BS-EN-ISO-3501-TC - Tracked Changes. Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force
- BS-EN-ISO-3503 - Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending
- BS-ISO-11413 - Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
- BS-ISO-11414 - Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
- BS-ISO-13953 - Polyethelene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
- BS-ISO-13954 - Plastics pipes and fittings. Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
- BS-ISO-13955 - Plastics pipes and fittings. Crushing decohesion test for polyethylene (PE) electrofusion assemblies
- BS-ISO-19892 - Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
- BS-ISO-7005-1 - Pipe flanges
- BS-ISO-8639 - Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leak tightness and proof of structural design of flexible joints
- BS-ISO-8639-TC - Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and proof of structural design of flexible joints
- BS-ISO-9624 - Thermoplastics piping systems for fluids under pressure. Flange adapters and loose backing flanges. Mating dimensions
- DD-CEN-1591-3 - Flanges and their joints. Design rules for gasketed circular flange connections
- DD-CEN-1591-4 - Flanges and their joints. Design rules for gasketed circular flange connections. Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
- DD-ENV-1591-2 - Gasket Parameters
- DD-ISO-19911 - Plastics pipes and fittings. Format of a technical file for characterizing PE spigot end fittings
- PD-6438 - A review of present methods for design of bolted flanges for pressure vessels
- PD-CEN-1591-2 - Flanges and their joints. Design rules for gasketed circular flange connections
- PD-CEN-1591-5 - Flanges and their joints. Design rules for gasketed circular flange connections
ISO:
- ISO-11413 - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
- ISO-11414 - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
- ISO-13783 - Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure
- ISO-13846 - Plastics piping systems -- End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping -- Test method for long-term leaktightness under internal water pressure
- ISO-13953 - Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
- ISO-13953-AM1 - - Amendment 1
- ISO-13954 - Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
- ISO-13954-AM1 - - Amendment 1: Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
- ISO-13955 - Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies
- ISO-13955-AM1 - - Amendment 1: Plastics pipes and fittings - Crushing decohesion test for polyethylene (PE) electrofusion assemblies
- ISO-13956 - Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test
- ISO-19879 - Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
- ISO-19892 - Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling
- ISO-19911 - Plastics pipes and fittings - Format of a technical file for characterizing PE spigot end fittings
- ISO-2536 - Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series - Dimensions of flanges
- ISO-27509 - Petroleum and natural gas industries - Compact flanged connections with IX seal ring
- ISO-3458 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure
- ISO-3459 - Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- ISO-3460 - Unplasticized polyvinyl chloride (PVC) pressures pipes - Metric series - Dimensions of adapter for backing flange
- ISO-3501 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force
- ISO-3503 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
- ISO-3663 - Polyethylene (PE) pressure pipes and fittings, metric series - Dimensions of flanges
- ISO-7005-1 - Pipe flanges - Part 1: Steel flanges for industrial and general service piping systems
- ISO-7005-2 - Metallic flanges - Part 2: Cast iron flanges
- ISO-7005-3 - Metallic flanges - Part 3 : Copper alloy and composite flanges
- ISO-8639 - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and proof of structural design of flexible joints
- ISO-9624 - Thermoplastics piping systems for fluids under pressure - Flange adapters and loose backing flanges - Mating dimensions
- ISO-9624-AM1 - - Amendment 1: Thermoplastics piping systems for fluids under pressure - Flange adapters and loose backing flanges - Mating dimensions - Amendment 1
Other SDOs:
- DIN-16831-3 - Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 3: Dimensions of injection-moulded sockets and caps for socket welding
- DIN-16831-7 - Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 7: Dimensions of bushings, flanges and selaing elements for socket welding
- DIN-2430-2 - Part 2: Piping Connections, Piping for Pigging Systems
- DIN-28117 - Block flanges for process apparatus - Connecting dimensions PN 10 to PN 40
- DIN-2848 - Lined Flanged Steel Pipes & Flanged Steel or Cast Iron Fittings Rated for Pressures Of
- DIN-2873 - Pn 10 & Pn 25 Flanged Enamelled Steel Pipes & Fittings
- DIN-2874 - Flanged Steel Pipes & Flanged Steel or Cast Iron Pipes & Fittings With Ptfe or Pfa Lin
- DIN-2875 - Flanged Steel Pipes & Fittings With Hard or Soft Rubber Linings - Technical Delivery C
- DIN-2876 - Flanged steel pipes and flanged steel fittings glass lined - Technical specifications
- DIN-3861 - Non-soldering compression fittings - Compression rings - Design
- DIN-8063-3 - Part 3: Dimensions of Screwed Pipe Joint Assemblies, Pipe Joint Assemblies & Fittings
- DIN-8063-6 - Part 6: Dimensions of Injection-Moulded Elbows for Solvent Cementing, Pipe Joint Assem
- DIN-8063-8 - Part 8: Dimensions of Injection-Moulded Sockets, Caps & Nipples for Solvent Cementing
- DIN-EN-10311 - Joints for the Connection of Steel Tubes & Fittings for the Conveyance of Water & Oth
- DIN-EN-1092-1 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges; German version EN 1092-1:2007+A1:2013
- DIN-EN-1092-3 - Part 3: Copper Alloy Flanges, Flanges & Their Joints, Circular Flanges for Pipes, Valv
- DIN-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
- DIN-EN-1333 - Flanges & Their Joints - Pipework Components - Definition & Selection of Pn
- DIN-EN-13555 - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- DIN-EN-14420-6 - Hose fittings with clamp units - Part 6: TW tank truck couplings; German version EN 14420-6:2013
- DIN-EN-14525 - Ductile Iron Wide Tolerance Coulings & Flange Adaptors for Use With Pipes of Different
- DIN-EN-14772 - Flanges & Their Joints, Quality Assurance Inspection & Testing of Gaskets in Accordanc
- DIN-EN-1515-3 - Part 3: Classification of Bolt Materials for Steel Flanges, Class Designated, Flanges
- DIN-EN-1759-1 - Part 1: Steel Flanges, Nps 1/2 To 24, Flanges & Their Joints, Circular Flanges for Pip
- DIN-EN-1759-3 - Part 3: Copper Alloy Flanges, Flanges & Their Joints, Circular Flanges for Pipes, Valv
- DIN-EN-489 - District Heating Pipes - Preinsulated Bonded Pipe Systems for Directly Buried Hot Wate
- EN-10311 - Joints for the Connection of Steel Tubes & Fittings for the Conveyance of Water & Oth
- EN-1092-1 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
- EN-1092-3 - Part 3: Copper Alloy Flanges, Flanges & Their Joints, Circular Flanges for Pipes, Valv
- EN-1119 - Plastics Piping Systems - Joints for Glass-Reinforced Thermosetting Plastics (Grp) Pip
- EN-1123-2 - Part 2: Dimensions, Pipes & Fittings of Longitudinally Welded Hot-Dip Galvanized Steel
- EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
- EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
- EN-12760 - Industrial valves - Socket welding ends for steel valves
- EN-13081 - Tanks for Transport of Dangerous Goods, Service Equipment for Tanks, Vapour Collection
- EN-13083 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
- EN-13221 - High-Pressure Flexible Connections for Use With Medical Gases
- EN-13555 - Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- EN-14525 - Ductile Iron Wide Tolerance Coulings & Flange Adaptors for Use With Pipes of Different
- EN-14772 - Flanges & Their Joints, Quality Assurance Inspection & Testing of Gaskets in Accordanc
- EN-14870-1 - Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
- EN-14870-3 - Petroleum & Natural Gas Industries, Induction Bends, Fittings & Flanges for Pipeline T
- EN-1515-3 - Part 3: Classification of Bolt Materials for Steel Flanges, Class Designated, Flanges
- EN-1515-4 - Part 4: Selection of Bolting for Equipment Subject To the Pressure Equipment Directive
- EN-1591-1 - Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
- EN-1591-2 - Part 2: Gasket Parameters, Flanges & Their Joints - Design Rules for Gasketed Circular
- EN-1591-4 - Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
- EN-16397-1 - Flexible couplings - Part 1: Performance requirements
- EN-16397-2 - Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes
- EN-1759-1 - Part 1: Steel Flanges, Nps 1/2 To 24, Flanges & Their Joints, Circular Flanges for Pip
- EN-1759-3 - Part 3: Copper Alloy Flanges, Flanges & Their Joints, Circullar Flanges for Pipes, Val
- EN-28601 - Specification for Representation of Dates and Times in Information Interchanges
- EN-ISO-19879 - Metallic Tube Connections for Fluid Power & General Use - Test Methods for Hydraulic F
- EN-ISO-19892 - Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling
- EN-ISO-27509 - Petroleum and natural gas industries - Compact flanged connections with IX seal ring (ISO 27509:2012)
- EN-ISO-3458 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure
- EN-ISO-3459 - Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- EN-ISO-3501 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force
- EN-ISO-3503 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
- JIS-B-1217-AM1 - Bolting for use with pipe flanges (Amendment 1)
- JIS-B-2205 - Basis for calculation of pipe flanges
- JIS-B-2205/A1 - Basis for calculation of pipe flanges (Amendment 1)
- JIS-B-2206 - Basis for calculation of aluminium alloy pipe flanges
- JIS-B-2206/A1 - Basis for calculation of aluminium alloy pipe flanges (Amendment 1)
- JIS-B-2207 - Basis for calculation of aluminium alloy pipe flanges with full face gasket
- JIS-B-2207/AM1 - Basis for calculation of aluminium alloy pipe flanges with full face gasket (Amendment 1)
- JIS-B-2220 - Steel pipe flanges
- JIS-B-2239 - Cast iron pipe flanges
- JIS-B-8602 - Pipe flanges for refrigerants
- SIS-CEN/TR-1591-2 - Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
- SIS-CEN/TS-1591-3 - Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
- SIS-CEN/TS-1591-4 - Flanges and their joints - Design rules for gasketed circular flange connetions - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
- SIS-ISO/TS-19911 - Plastics pipes and fittings - Format of a technical file for characterizing PE spigot end fittings
- SMS-1113 - Control valves. Straight valves. Nominal pressure: 10
- SMS-1114 - Control valves. Angle valves. Nominal pressure: 10
- SS-1240 - Piping systems - Welding ends for components of unalloyed steel and low alloy wrought steel
- SS-3386 - Piping systems - Welding ends for components of stainless steel
- SS-EN-10311 - Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
- SS-EN-1092-1 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
- SS-EN-1092-2 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
- SS-EN-1092-3 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
- SS-EN-1092-4 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
- SS-EN-1119 - Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
- SS-EN-1123-1 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1123-1-AM1 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1123-2 - Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
- SS-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
- SS-EN-1124-1 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1124-1-AM1 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
- SS-EN-1124-2 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
- SS-EN-1124-3 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
- SS-EN-12734 - Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical characteristics and testing
- SS-EN-12760 - Industrial valves - Socket welding ends for steel valves
- SS-EN-12827 - Inland navigation vessels - Connections for the transfer of diesel oil
- SS-EN-13081 - Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
- SS-EN-13083 - Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
- SS-EN-13108-20 - Bituminous mixtures - Material specifications - Part 20: Type Testing
- SS-EN-13108-21 - Bituminous mixtures - Material specifications - Part 21: Factory Production Control
- SS-EN-13221 - High-pressure flexible connections for use with medical gases
- SS-EN-1333 - Flanges and their joints - Pipework components - Definition and selection of PN
- SS-EN-13555 - Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- SS-EN-13755 - Natural stone test methods - Determination of water absorption at atmospheric pressure
- SS-EN-14525 - Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement
- SS-EN-14772 - Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
- SS-EN-14870-1 - Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2018, modified)
- SS-EN-14870-3 - Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified)
- SS-EN-1514-7 - Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
- SS-EN-1515-1 - Flanges and threir joints - Bolting - Part 1: Selection of bolting
- SS-EN-1515-2 - Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
- SS-EN-1515-3 - Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
- SS-EN-1515-4 - Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU
- SS-EN-1591-1 - Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
- SS-EN-1591-2 - Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
- SS-EN-1591-4 - Flanges and their joints - Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
- SS-EN-16397-1 - Flexible couplings - Part 1: Performance requirements
- SS-EN-16397-2 - Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes
- SS-EN-1759-1 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS ½ to 24
- SS-EN-1759-3 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges
- SS-EN-1759-4 - Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
- SS-EN-3155-027 - Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard
- SS-EN-489 - District heating pipes - Preinsulated bonded pipe systems for direcly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
- SS-EN-489-1 - District heating pipes - Bonded single and twin pipe systems for buried hot water networks - Part 1: Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1
- SS-EN-54-18 - Fire detection and fire alarm systems - Part 18: Input/output devices
- SS-EN-589 - Automotive fuels - LPG - Requirements and test methods
- SS-EN-712 - Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pullout under constant longitudinal force
- SS-EN-713 - Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test methods for leaktightness under internal pressure of assemblies subjected to bending
- SS-EN-714 - Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust
- SS-EN-715 - Thermoplastics piping systems - End-load bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust
- SS-EN-737-1 - Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum
- SS-EN-737-4 - Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavening systems
- SS-EN-911 - Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for themoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
- SS-EN-ISO-13274 - Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO 13274:2013)
- SS-EN-ISO-13783 - Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socketjoints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997)
- SS-EN-ISO-13844 - Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leak tightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
- SS-EN-ISO-13845 - Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
- SS-EN-ISO-13846 - Plastics piping systems - End-load bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000)
- SS-EN-ISO-19879 - Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
- SS-EN-ISO-19892 - Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling (ISO 19892:2011)
- SS-EN-ISO-21969 - High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)
- SS-EN-ISO-27509 - Petroleum and natural gas industries - Compact flanged connections with IX seal ring (ISO 27509:2020)
- SS-EN-ISO-3458 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015)
- SS-EN-ISO-3459 - Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2015)
- SS-EN-ISO-3501 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force (ISO 3501:2021)
- SS-EN-ISO-3503 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)
- SS-EN-ISO-4126-7 - Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013)
- SS-EN-ISO-5620-1 - Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements (ISO 5620-1:1992)
- SS-EN-ISO-5620-2 - Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components (ISO 5620-2:1992)
- SS-EN-ISO-9170-1 - Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2020)
- SS-EN-ISO-9170-2 - Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008)
- SS-EN-ISO/IEC-27011 - Information technology - Security techniques - Code of practice for Information security controls based on ISO/IEC 27002 for telecommunications organizations (ISO/IEC 27011:2016)
- SS-ENV-1591-2 - Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
- SS-ISO-11413 - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting (ISO 11413:2019, IDT)
- SS-ISO-11414 - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion (ISO 11414:2009, IDT)
- SS-ISO-13954 - Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm (ISO 13954:1997, IDT)
- SS-ISO-13954-AM1 - Plastics pipes and fittings - Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm Amendment 1 (ISO 13954:1997/Amd 1:2020, IDT)
- SS-ISO-13956 - Plastics pipes and fittings - Decohesion test of polyethylene (PE) saddle fusion joints - Evaluation of ductility of fusion joint interface by tear test (ISO 13956:2010, IDT)
- SS-ISO-3803 - Road vehicles - Hydraulic pressure test connection for braking equipment
- SS-ISO-7005-1 - Pipe flanges - Part 1: Steel flanges for industrial and general service piping systems (ISO 7005-1:2011, IDT)
- SS-ISO-8639 - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to flexible joints
- UNE-EN-1591-1 - Intelligent transport systems - ESafety - ECall minimum set of data
- UNE-EN-ISO-3458 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure
- UNE-EN-ISO-3459 - Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure
- UNE-EN-ISO-3501 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for resistance to pull-out under constant longitudinal force
- UNE-EN-ISO-3503 - Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending