Document Center List of Standards on Seals For Pipe And Hose Assemblies
ICS Code 23.040.80
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1563 - Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
- ASTM-C1681 - Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
- ASTM-C564 - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
- ASTM-C877M - Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
- ASTM-D1869 - Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe
- ASTM-D6396 - Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
- ASTM-F1336 - Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
- ASTM-F2331 - Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
- ASTM-F2768 - Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components (Withdrawn 2016)
- ASTM-F2836 - Standard Practice for Gasket Constants for Bolted Joint Design
- ASTM-F2946 - Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
- ASTM-F3058 - Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
- ASTM-F3240 - Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines
- ASTM-F477 - Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- ASTM-F493 - Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
- ASTM-F913 - Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining
Plastic Pipe
BSI:
- BS-3063 - Specification for dimensions of gaskets for pipe flanges
- BS-3381 - Specification for spiral wound gaskets for steel flanges to BS 1560
- BS-4865-2 - Dimensions of gaskets for flanges to BS 4504. Specification for spiral wound gaskets for use with steel flanges
- BS-6209 - Specification for solvent cement for non-pressure thermoplastics pipe systems
- BS-6442 - Specification for limits of surface imperfections on elastomeric toroidal sealing rings ('O'-rings)
- BS-7531 - Rubber bonded fibre jointing for industrial and aerospace purposes. Specification
- BS-EN-12308 - Installations and equipment for LNG. Suitability testing of gaskets designed for flanged joints used on LNG piping
- BS-EN-12560-1 - Flanges and their joints. Gaskets for Class-designated flanges
- BS-EN-12560-2 - Flanges and their joints. Dimensions of gaskets for Class-designated flanges
- BS-EN-12560-3 - Flanges and their joints. Gaskets for Class-designated flanges
- BS-EN-12560-4 - Flanges and their joints. Gaskets for Class-designated flanges
- BS-EN-12560-5 - Flanges and their joints. Gaskets for Class-designated flanges
- BS-EN-13090 - Means for resealing threaded joints of gas pipework in buildings
- BS-EN-13555 - Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- BS-EN-14741 - Thermoplastics piping and ducting systems. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
- BS-EN-14772 - Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
- BS-EN-1514-1 - Flanges and their joints. Dimensions of gaskets for PN-designated flanges
- BS-EN-1514-2 - Flanges and their joints. Gaskets for PN-designated flanges
- BS-EN-1514-3 - Flanges and their joints. Dimensions of gaskets for PN-designated flanges
- BS-EN-1514-4 - Flanges and their joints. Dimensions of gaskets for PN-designated flanges
- BS-EN-1514-8 - Flanges and their joints. Dimensions of gaskets for PN-designated flanges
- BS-EN-1989 - Thermoplastics piping systems. Joints for buried non-pressure sewerage applications. Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
- BS-EN-62339-1 - Modular component interfaces for surface-mount fluid distribution components
- BS-EN-681-1 - Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications
- BS-EN-681-2 - Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications
- BS-EN-681-3 - Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications
- BS-EN-681-4 - Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications
- BS-EN-682 - Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
- BS-EN-751-3-TC - Tracked Changes. Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water
- BS-EN-ISO-13259 - Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
- BS-ISO-4437-3-TC - Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE)
- BS-ISO-4708 - Composition cork. Gasket material. Test methods
IEC:
ISO:
- ISO-7483 - Dimensions of gaskets for use with flanges to ISO 7005
- ISO-9691 - Rubber -- Recommendations for the workmanship of pipe joint rings -- Description and classification of imperfections
Other SDOs:
- DIN-16831-7 - Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 7: Dimensions of bushings, flanges and selaing elements for socket welding
- DIN-EN-12560-7 - Part 7: Covered Metal Jacketed Gaskets for Use With Steel Flanges, Flanges & Their Joi
- DIN-EN-13555 - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- DIN-EN-14741 - Thermoplastics Piping & Ducting Systems - Joints for Buried Non-Pressure Applications
- DIN-EN-14772 - Flanges & Their Joints, Quality Assurance Inspection & Testing of Gaskets in Accordanc
- DIN-EN-1514-8 - Part 8: Polymeric O-Ring Gaskets for Grooved Flanges, Flanges & Their Joints, Dimensio
- DIN-EN-681-1 - Part 1: Vulcanized Rubber, Elastomeric Seals - Material Requirements for Pipe Joint Se
- DIN-EN-681-2 - Part 2: Thermoplastic Elastomers, Elastomeric Seals - Material Requirements for Pipe J
- DIN-EN-681-3 - Part 3: Cellular Materials of Vulcanized Rubber, Elastomeric Seals - Material Requirem
- DIN-EN-681-4 - Part 4: Cast Polyurethane Sealing Elements, Elastomeric Seals - Material Requirements
- DIN-EN-682 - Elastomeric Seals - Material Requirements for Seals Used in Pipes & Fittings Carrying
- EN-12560-7 - Part 7: Covered Metal Jacketed Gaskets for Use With Steel Flanges, Flanges & Their Joi
- EN-13555 - Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- EN-14741 - Thermoplastics Piping & Ducting Systems - Joints for Buried Non-Pressure Applications
- EN-14772 - Flanges & Their Joints, Quality Assurance Inspection & Testing of Gaskets in Accordanc
- EN-1514-1 - Flanges & Their Joints, Dimensions of Gaskets for PN-Designated Flanges, Non-Metallic
- EN-1514-2 - Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
- EN-1514-3 - Flanges & Their Joints, Dimensions of Gaskets for PN-Designated Flanges, Non-Metallic
- EN-1514-4 - Flanges & Their Joints, Dimensions of Gaskets for PN-Designated Flanges, Corrugated, F
- EN-1514-8 - Part 8: Polymeric O-Ring Gaskets for Grooved Flanges, Flanges & Their Joints, Dimensio
- EN-62339-1 - Modular Component Interfaces for Surface-Mount Fluid Distribution Components, Elastome
- EN-681-1 - Part 1: Vulcanized Rubber, Elastomeric Seals - Material Requirements for Pipe Joint Se
- EN-681-2 - Part 2: Thermoplastic Elastomers, Elastomeric Seals - Material Requirements for Pipe J
- EN-681-3 - Part 3: Cellular Materials of Vulcanized Rubber, Elastomeric Seals - Material Requirem
- EN-681-4 - Part 4: Cast Polyurethane Sealing Elements, Elastomeric Seals - Material Requirements
- EN-682 - Elastomeric Seals - Material Requirements for Seals Used in Pipes & Fittings Carrying
- JIS-B-2404 - Dimensions of gaskets for use with pipe flanges
- SS-EN-12560-1 - Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
- SS-EN-12560-2 - Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
- SS-EN-12560-3 - Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
- SS-EN-12560-4 - Flanges and their joints - Gaskets for Class-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
- SS-EN-12560-5 - Flanges and their joints - Gaskets for Class-designated flanges - Part 5: Metallic ring joint gaskets for use with steel flanges
- SS-EN-12560-6 - Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
- SS-EN-12560-7 - Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
- SS-EN-1277 - Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
- SS-EN-13090 - Means for resealing threaded joints of gas pipework in buildings
- SS-EN-13555 - Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
- SS-EN-14741 - Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
- SS-EN-14772 - Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
- SS-EN-1514-1 - Flanges and their joints - Dimensions of gaskets for PN designated flanges - Part 1: Non-metallic flat gaskets with or without insert
- SS-EN-1514-2 - Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
- SS-EN-1514-3 - Flanges and their joints - Dimensions of gaskets for PN designated flanges - Part 3: Non-metallic PTFE envelope gaskets
- SS-EN-1514-4 - Flanges and their joints - Dimensions of gaskets for PN designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gasketsfor use with steel flanges
- SS-EN-1514-6 - Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
- SS-EN-1514-8 - Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges
- SS-EN-1989 - Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
- SS-EN-681-1 - Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-681-1-AM1 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-681-1-AM2 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-681-1-AM3 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
- SS-EN-681-2 - Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
- SS-EN-681-2-AM1 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
- SS-EN-681-2-AM2 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
- SS-EN-681-3 - Elastomeric seals - Materials requirements for pipe joints seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber
- SS-EN-681-3-AM1 - Elastomeric seals - Material requirements for joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber
- SS-EN-681-3-AM2 - Elastomeric seals - Materials requirements for pipe joints seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber
- SS-EN-681-4 - Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
- SS-EN-681-4-AM1 - Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
- SS-EN-681-4-AM2 - Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
- SS-EN-751-1 - Sealing materials for metallic threaded joints incontact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
- SS-EN-751-2 - Sealing materials for metallic threaded joints incontact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointingcompounds
- SS-EN-751-3 - Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
- SS-EN-ISO-13259 - Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
- SS-EN-ISO-9100-14 - Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005)
- SS-ISO-9691 - Rubber - Recommendations for the workmanship of pipe joint rings - Description and classification of imperfections