Document Center List of Standards on Pumps Pumps For Fluid Power Systems, See 23.100.10 Vacuum Pumps, See 23.160
ICS Code 23.080
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D2809 - Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
- ASTM-D5337 - Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps
- ASTM-D7353 - Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
- ASTM-E295 - Standard Test Method for Measured Speed of Oil Diffusion Pumps
- ASTM-F998 - Standard Specification for Centrifugal Pump, Shipboard Use
BSI:
- BS-1394-1 - Stationary circulation pumps for heating and hot water service systems.
- BS-1394-2 - Specification for power driven circulators. Domestic glandless pumps
- BS-3456-202.41 - Electric Pumps for Liquids Having a Temperature Not Exceeding 35'C
- BS-5257 - Specification for horizontal end-suction centrifugal pumps (16 bar)
- BS-5316-1 - Specification for acceptance tests for centrifugal, mixed flow and axial pumps. Class C tests
- BS-5316-2 - Specification for acceptance tests for centrifugal, mixed flow and axial pumps. Class B tests
- BS-599 - Methods of testing pumps
- BS-7929 - Guide for the verification of a pump casing design procedure
- BS-EN-1151 - Pumps. Rotodynamic pumps. Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations. Requirements, testing, marking
- BS-EN-1151-1 - Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations. Non-automatic circulation pumps, requirements, testing, marking
- BS-EN-1151-2 - Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations. Noise test code (vibro-acoustics) for measuring structure and fluid-borne noise
- BS-EN-12157 - Rotodynamic pumps. Coolant pump units for machine tools. Nominal flow rate, dimensions
- BS-EN-12162 - Liquid pumps. Safety requirements. Procedure for hydrostatic testing
- BS-EN-1232 - Workplace atmospheres. Pumps for personal sampling of chemical agents. Requirements and test methods
- BS-EN-12483 - Liquid pumps. Pump units with frequency inverters. Guarantee and compatibility tests
- BS-EN-12639 - Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
- BS-EN-12723 - Liquid pumps. General terms for pumps and installations. Definitions, quantities, letter symbols and units
- BS-EN-12919 - Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods
- BS-EN-13275 - Cryogenic vessels. Pumps for cryogenic service
- BS-EN-13951 - Liquid pumps. Safety requirements. Agrifoodstuffs equipment; Design rules to ensure hygiene in use
- BS-EN-14343 - Rotary positive displacement pumps. Performance tests for acceptance
- BS-EN-16051-1 - Inflation devices and accessories for inflatable consumer products
- BS-EN-16051-2 - Inflation devices and accessories for inflatable consumer products
- BS-EN-16297-1 - Pumps. Rotodynamic pumps. Glandless circulators. General requirements and procedures for testing and calculation of energy efficiency index (EEI)
- BS-EN-16297-2 - Pumps. Rotodynamic pumps. Glandless circulators. Calculation of energy efficiency index (EEI) for standalone circulators
- BS-EN-16297-3 - Pumps. Rotodynamic pumps. Glandless circulators
- BS-EN-16480 - Pumps. Rotodynamic pumps. Minimum required efficiency of water pumps and determination of Minimum Efficiency Index (MEI)
- BS-EN-16480-TC - Tracked Changes. Pumps. Rotodynamic pumps. Minimum required efficiency of water pumps and determination of Minimum Efficiency Index (MEI)
- BS-EN-16644 - Pumps. Rotodynamic pumps. Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations. Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
- BS-EN-16752 - Centrifugal pumps. Test procedure for seal packings
- BS-EN-17038-1 - Pumps. Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units
- BS-EN-17038-2 - Pumps. Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units
- BS-EN-60335-2-41 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-51 - Household and similar electrical appliances. Safety
- BS-EN-60335-2-67 - Household and similar electrical appliances. Safety
- BS-EN-809 - Pumps and pump units for liquids. Common safety requirements
- BS-EN-IEC-60335-2-41 - Household and similar electrical appliances. Safety
- BS-EN-ISO-13137 - Workplace atmospheres Pumps for personal sampling of chemical and biological agents Requirements and test methods
- BS-EN-ISO-13710 - Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
- BS-EN-ISO-14414 - Pump system energy assessment
- BS-EN-ISO-15136-1 - Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift
- BS-EN-ISO-15783 - Seal-less rotodynamic pumps. Class II. Specification
- BS-EN-ISO-17769-1 - Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units
- BS-EN-ISO-17769-2 - Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units
- BS-EN-ISO-20361 - Liquid pumps and pumps units. Noise test code. Grades 2 and 3 of accuracy
- BS-EN-ISO-24490 - Cryogenic vessels. Pumps for cryogenic service
- BS-EN-ISO-5199 - Technical specifications for centrifugal pumps. Class II
- BS-EN-ISO-9905 - Technical specifications for centrifugal pumps. Class I
- BS-EN-ISO-9906 - Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3
- BS-ISO-17613-1 - Manually operated pumps for drinking water. Selection and acceptance
- BS-ISO-21630 - Pumps. Testing. Submersible mixers for wastewater and similar applications
- BS-ISO-3069 - End-suction centrifugal pumps. Dimensions of cavities for mechanical seals and for soft packing
- DD-CLC-50537-2 - Railway applications. Mounted parts of the traction transformer and cooling system
- DD-CLC-50537-3 - Railway applications. Mounted parts of the traction transformer and cooling system
- PD-CEN-13930 - Rotodynamic pumps. Design of pump intakes. Recommendations for installation of pumps
- PD-CEN-13931 - Rotodynamic pumps. Forces and moments on flanges. Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps
- PD-CEN-13932 - Rotodynamic pumps. Recommendations for fitting of inlet and outlet on piping
- PD-ISO-17766 - Centrifugal pumps handling viscous liquids. Performance corrections
- PD-ISO-19688 - Rotodymanic pumps. Hydraulic performance acceptance test using a model pump
IEC:
- IEC-60335-2-41 - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
- IEC-60335-2-41/A2 - Amendment 2: Household & Similar Electrical Appliances - Safety - Part 2-41: Particula
- IEC-60335-2-51 - Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
- IEC-60335-2-51-1 - Amendment 1: Household & Similar Electrical Appliances - Safety - Part 2-51: Particula
- IEC-60335-2-51-AM2 - Amendment 2 - Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
- IEC-60335-2-51-RL - Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
- IEC-60335-2-67 - Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use
- IEC-60335-2-67-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use
- IEC-60335-2-67-RL - Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use
- IEC-60335-2-68 - Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use
- IEC-60335-2-68-1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use
ISO:
- ISO-14617-9 - Graphical symbols for diagrams - Part 9: Pumps, compressors and fans
- ISO-14847 - Rotary positive displacement pumps -- Technical requirements
- ISO-15783 - Seal-less rotodynamic pumps - Class II - Specification
- ISO-15783-1 - Seal-less rotodynamic pumps - Class II - Specification - Amendment 1
- ISO-16330 - Reciprocating positive displacement pumps and pump units - Technical requirements
- ISO-17613-1 - Manually operated pumps for drinking water - Selection and acceptance - Part 1: Southeast Asia
- ISO-17766 - Centrifugal pumps handling viscous liquids - Performance corrections
- ISO-17769 - Liquid pumps and installation - General terms - Definitions, quantities, letter symbols and units
- ISO-17769-1 - Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 1: Liquid pumps
- ISO-17769-2 - Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 2: Pumping system
- ISO-19688 - Rotodymanic pumps - Hydraulic performance acceptance test using a model pump
- ISO-20361 - Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy
- ISO-20361-RL - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (includes Redline Version)
- ISO-21049 - Pumps - Shaft sealing systems for centrifugal and rotary pumps
- ISO-21630 - Pumps - Testing - Submersible mixers for wastewater and similar applications
- ISO-2858 - End-suction centrifugal pumps (rating 16 bar) -- Designation, nominal duty point and dimensions
- ISO-3069 - End-suction centrifugal pumps -- Dimensions of cavities for mechanical seals and for soft packing
- ISO-3661 - End-suction centrifugal pumps -- Baseplate and installation dimensions
- ISO-5198 - Centrifugal, mixed flow and axial pumps -- Code for hydraulic performance tests -- Precision grade
- ISO-5199 - Technical specifications for centrifugal pumps - Class II
- ISO-9905 - Technical specifications for centrifugal pumps -- Class I
- ISO-9905-AM1 - Technical specifications for centrifugal pumps - Class I - Amendment 1
- ISO-9906 - Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3
- ISO-9908 - Technical specifications for centrifugal pumps -- Class III
- ISO-9908-AM1 - Technical specifications for centrifugal pumps - Class III - Amendment 1
- ISO/ASME-14414 - Pump system energy assessment
- ISO/ASME-14414-AM1 - - Amendment 1
Other SDOs:
- DIN-EN-1151-1 - Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 1: Non-automatic circulation pumps, requirements, testing, marking; German version EN 1151-1
- DIN-EN-1151-2 - Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid borne noise; German
- DIN-EN-13951 - Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
- DIN-EN-14343 - Rotary Positive Displacement Pumps - Performance Tests for Acceptance
- DIN-EN-ISO-15783 - Seal-Less Rotodynamic Pumps - Class Ii, Specification
- DIN-EN-ISO-9906 - Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012)
- EN-1151-1 - Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations. Non-automatic circulation pumps, requirements, testing, marking
- EN-1151-2 - Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations. Noise test code (vibro-acoustics) for measuring structure and fluid-borne noise
- EN-1232 - Workplace Atmospheres, Pumps for Personal Sampling of Chemical Agents, Requirements &
- EN-13275 - Cryogenic vessels - Pumps for cryogenic service
- EN-13951 - Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
- EN-14343 - Rotary Positive Displacement Pumps - Performance Tests for Acceptance
- EN-16051-1 - Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters
- EN-16051-2 - Inflation devices and accessories for inflatable consumer products - Part 2: Safety requirements, durability, performance, compatibility and test methods of inflators
- EN-16297-1 - Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
- EN-16297-2 - Pumps - Rotodynamic pumps - Glandless circulators - Part 2: Calculation of energy efficiency index (EEI) for standalone circulators
- EN-16297-3 - Pumps - Rotodynamic pumps - Glandless circulators - Part 3: Energy efficiency index (EEI) for circulators integrated in products
- EN-16480 - Pumps - Minimum required efficiency of rotodynamic water pumps
- EN-16644 - Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
- EN-16752 - Centrifugal pumps - Test procedure for seal packings
- EN-17038-2 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
- EN-60335-2-51 - Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
- EN-60335-2-67 - Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use
- EN-809 - Pumps and pump units for liquids. Common safety requirements
- EN-ISO-14414 - Pump system energy assessment
- EN-ISO-15783 - Seal-Less Rotodynamic Pumps - Class Ii, Specification
- EN-ISO-17769-1 - Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 1: Liquid pumps (ISO 17769-1:2012)
- EN-ISO-17769-2 - Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 2: Pumping System (ISO 17769-2:2012)
- EN-ISO-20361 - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy
- EN-ISO-2858 - End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions
- EN-ISO-3661 - End-suction centrifugal pumps - Baseplate and installation dimensions
- EN-ISO-9906 - Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012)
- JIS-B-8327 - Testing methods for performance of pump using model pump
- SIS-CEN/TS-17606 - Installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards
- SIS-CEN/TS-17607 - Operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards
- SIS-ISO/TR-17766 - Centrifugal pumps handling viscous liquids - Performance corrections
- SIS-ISO/TR-19688 - Rotodymanic pumps - Hydraulic performance acceptance test using a model pump
- SMS-363 - Centrifugal, mixed flow and axial pumps. Code foracceptance test. Class C
- SS-EN-1012-1 - Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
- SS-EN-1012-3 - Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
- SS-EN-1151 - Pumps - Rotodynamic pumps - Circulation pumps having an electrical efffect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking
- SS-EN-1151-1 - Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 1: Non-automatic circulation pumps, requirements, testing, marking
- SS-EN-1151-2 - Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
- SS-EN-12157 - Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions
- SS-EN-12162 - Liquid pumps - Safety requirements - Procedure for hydrostatic testing
- SS-EN-12262 - Rotodynamic pumps - Technical documents - Terms, delivery range, layout
- SS-EN-1232 - Work place atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods
- SS-EN-12483 - Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests
- SS-EN-12639 - Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
- SS-EN-1271 - Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods
- SS-EN-12723 - Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units
- SS-EN-12919 - Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods
- SS-EN-13275 - Cryogenic vessels - Pumps for cryogenic service
- SS-EN-13951 - Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use
- SS-EN-14343 - Rotary positive displacement pumps - Performance tests for acceptance
- SS-EN-14710-1 - Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements
- SS-EN-14710-2 - Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements
- SS-EN-16051-1 - Inflation devices and accessories for inflatable consumer products - Part 1: Compatibility of valves and valve adapters
- SS-EN-16051-2 - Inflation devices and accessories for inflatable consumer products - Part 2: Safety requirements, durability, performance, compatibility and test methods of inflators
- SS-EN-16297-1 - Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
- SS-EN-16297-2 - Pumps - Rotodynamic pumps - Glandless circulators - Part 2: Calculation of energy efficiency index (EEI) for standalone circulators
- SS-EN-16297-3 - Pumps - Rotodynamic pumps - Glandless circulators - Part 3: Energy efficiency index (EEI) for circulators integrated in products
- SS-EN-16480 - Pumps - Rotodynamic pumps - Minimum required efficiency of water pumps and determination of Minimum Efficiency Index (MEI)
- SS-EN-16644 - Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
- SS-EN-16752 - Centrifugal pumps - Test procedure for seal packings
- SS-EN-17038-1 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
- SS-EN-17038-2 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
- SS-EN-22858 - End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions
- SS-EN-23661 - End-suction centrifugal pumps - Baseplate and andinstallation dimensions
- SS-EN-25199 - Technical specifications for centrifugal pumps - Class II (ISO 5199:1986)
- SS-EN-733 - End-suction centrifugal pumpa, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system
- SS-EN-734 - Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system
- SS-EN-735 - Overall dimensions of rotodynamic pumps - Tolerances
- SS-EN-752 - Drain and sewer systems outside buildings - Sewer system management
- SS-EN-752-6 - Drain and sewer systems outside buildings - Part 6: Pumping installations
- SS-EN-809 - Pumps and pump units for liquids - Common safety requirements
- SS-EN-ISO-13137 - Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2022)
- SS-EN-ISO-13709 - Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
- SS-EN-ISO-14414 - Pump system energy assessment (ISO/ASME 14414:2019)
- SS-EN-ISO-14414-AM1 - Pump system energy assessment - (ISO 14414:2015/Amd 1:2016)
- SS-EN-ISO-14847 - Rotary positive displacement pumps - Technical requirements (ISO 14847:1999)
- SS-EN-ISO-15783 - Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002)
- SS-EN-ISO-15783-AM1 - Seal-less rotodynamic pumps - Class II - Specification - Amendment 1 (ISO 15783:2003/Amd 1:2008)
- SS-EN-ISO-16330 - Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003)
- SS-EN-ISO-17769-1 - Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 1: Liquid pumps (ISO 17769-1:2012)
- SS-EN-ISO-17769-2 - Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 2: Pumping System (ISO 17769-2:2012)
- SS-EN-ISO-19439 - Enterprise integration - Framework for enterprise modelling (ISO 19439:2006)
- SS-EN-ISO-20361 - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)
- SS-EN-ISO-21049 - Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
- SS-EN-ISO-2858 - End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions (ISO 2858:1975)
- SS-EN-ISO-3661 - End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977)
- SS-EN-ISO-5198 - Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987)
- SS-EN-ISO-5199 - Technical specifications for centrifugal pumps - Class II (ISO 5199:2002)
- SS-EN-ISO-9905 - Technical specifications for centrifugal pumps - Class I (ISO 9905:1994)
- SS-EN-ISO-9905-AM1 - Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/Amd 1:2011)
- SS-EN-ISO-9906 - Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012)
- SS-EN-ISO-9908 - Technical specifications for centrifugal pumps - Class III (ISO 9908:1993)
- SS-EN-ISO-9908-AM1 - Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/Amd 1:2011)
- SS-ISO-10791-6 - Test conditions for machining centres - Part 6: Accuracy of speeds and interpolations (ISO 10791-6:2014, IDT)
- SS-ISO-1607-1 - Positive-displacement vacuum pumps - Measurement of performance characteristics - Part 1: Measurement of volume rate of flow (pumping speed) (ISO 1607-1:1993, IDT)
- SS-ISO-1607-2 - Positive-displacement vacuum pumps - Measurement of performance characteristics - Part 2: Measurement of ultimate pressure
- SS-ISO-1746 - Rubber or plastics hoses and tubing - Bending tests - Technical Corrigendum 1
- SS-ISO-17613-1 - Manually operated pumps for drinking water - Selection and acceptance - Part 1: South East Asia (ISO 17613-1:2006, IDT)
- SS-ISO-17769 - Liquid pumps and installation - General terms - Definitions, quantities, letter symbols and units (ISO 17769:2008, IDT)
- SS-ISO-20361 - Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007, IDT)
- SS-ISO-21049 - Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004, IDT)
- SS-ISO-21630 - Pumps - Testing - Submersible mixers for wastewater and similar applications (ISO 21630:2007, IDT)
- SS-ISO-2858 - End-suction centrifugal pumps (rating 16 bar) - Designation, nominal duty point and dimensions
- SS-ISO-3069 - End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing
- SS-ISO-3661 - End-suction centrifugal pumps - Baseplate and installation dimensions
- SS-ISO-5199 - Technical specifications for centrifugal pumps - Class II
- SS-ISO-9908 - Technical specifications for centrifugal pumps - Class III
- UNE-EN-ISO-14414 - Pump system energy assessment
- UNE-EN-ISO-20361 - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy