Document Center List of Standards on Milling Tools
ICS Code 25.100.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-122-1 - Specification for milling cutters and reamers
- BS-122-3 - Milling cutters. Specification for milling cutters except screwed shank cutters
- BS-122-4 - Milling cutters
- BS-122-5 - Milling cutters. Specification for mounting dimensions and accessories
- BS-122-6 - Milling cutters. Specification for dimensions for interchangeability of cutter arbors and cutter mandrels
- BS-328-5 - Drills and reamers
- BS-4193-10 - Specification for End Mills With Indexable Inserts & Morse Taper Shank
- BS-4193-12 - Specification for Dimensions of Side and Face Milling and Slotting Cutters With Indexa
- BS-4193-9 - Specification for End Mills With Indexable Inserts and Flatted Parallel Shank
- BS-7745-1 - End mills with brazed helical hardmetal tips. Dimensions of end mills with parallel shank
- BS-7745-2 - End mills with brazed helical hardmetal tips. Dimensions of end mills with taper shank
- BS-EN-IEC-61158-3-4 - Industrial communication networks. Fieldbus specifications
- BS-EN-ISO-15641 - Milling cutters for high speed machining. Safety requirements
- BS-ISO-10145-1 - End mills with brazed helical hardmetal tips
- BS-ISO-10145-2 - End mills with brazed helical hardmetal tips
- BS-ISO-10911 - Solid hardmetal end mills with cylindrical shank. Dimensions
- BS-ISO-11529 - Milling cutters. Designation. Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
- BS-ISO-11529-1 - Milling cutters. Designation. Shank-type end mills of solid or tipped design
- BS-ISO-11529-2 - Milling cutters. Designation. Shank-type and bore-type milling cutters with indexable inserts
- BS-ISO-12197 - Woodruff keyseat cutters. Dimensions
- BS-ISO-12197-TC - Tracked Changes. Woodruff keyseat cutters. Dimensions
- BS-ISO-15917 - Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
- BS-ISO-1641-1 - End mills and slot drills
- BS-ISO-1641-1-TC - Tracked Changes. End mills and slot drills
- BS-ISO-1641-2 - End mills and slot drills
- BS-ISO-1641-3 - End mills and slot drills
- BS-ISO-240 - Milling cutters. Interchangeability dimensions for cutter arbors or cutter mandrels
- BS-ISO-2584 - Cylindrical cutters with plain bore and key drive. Metric series
- BS-ISO-2780 - Milling cutters with tenon drive. Interchangeability dimensions for cutter arbors. Metric series
- BS-ISO-2780-TC - Tracked Changes. Milling cutters with tenon drive. Interchangeability dimensions for cutter arbors. Metric series
- BS-ISO-3338-1 - Cylindrical shanks for milling cutters. Dimensional characteristics of plain cylindrical shanks
- BS-ISO-3338-2 - Cylindrical shanks for milling cutters
- BS-ISO-6262-1 - End mills with indexable inserts
- BS-ISO-6262-2 - End mills with indexable inserts
- BS-ISO-6986 - Side and face milling (slotting) cutters with indexable inserts. Dimensions
- BS-ISO-7755-1 - Hardmetal burrs
- BS-ISO-7755-10 - Hardmetal burrs
- BS-ISO-7755-11 - Hardmetal burrs
- BS-ISO-7755-12 - Hardmetal burrs
- BS-ISO-7755-2 - Hardmetal burrs
- BS-ISO-7755-3 - Hardmetal burrs
- BS-ISO-7755-4 - Hardmetal burrs
- BS-ISO-7755-5 - Hardmetal burrs
- BS-ISO-7755-6 - Hardmetal burrs
- BS-ISO-7755-7 - Hardmetal burrs
- BS-ISO-7755-8 - Hardmetal burrs
- BS-ISO-7755-9 - Hardmetal burrs
ISO:
- ISO-10145-1 - End mills with brazed helical hardmetal tips - Part 1: Dimensions of end mills with parallel shank
- ISO-10145-2 - End mills with brazed helical hardmetal tips - Part 2: Dimensions of end mills with 7/24 taper shank
- ISO-10911 - Solid hardmetal end mills with cylindrical shank - Dimensions
- ISO-11529 - Milling cutters - Designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
- ISO-11529-1 - Milling cutters - Designation - Part 1: Shank-type end mills of solid or tipped design
- ISO-11529-2 - Milling cutters - Designation - Part 2: Shank-type and bore-type milling cutters with indexable inserts
- ISO-12197 - Woodruff keyseat cutters - Dimensions
- ISO-15641 - Milling cutters for high speed machining - Safety requirements
- ISO-15917 - Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
- ISO-1641-1 - End mills and slot drills - Part 1: Milling cutters with cylindrical shanks
- ISO-1641-2 - End mills and slot drills - Part 2: Dimensions and designation of milling cutters with Morse taper shanks
- ISO-1641-3 - End mills and slot drills - Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
- ISO-22037 - Solid end mills with corner radii and cylindrical shanks made of hard cutting materials - Dimensions
- ISO-240 - Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels
- ISO-2584 - Cylindrical cutters with plain bore and key drive - Metric series
- ISO-2585 - Slotting cutters with plain bore and key drive - Metric series
- ISO-2586 - Shell end mills with plain bore and tenon drive - Metric series
- ISO-2587 - Side and face milling cutters with plain bore and key drive - Metric series
- ISO-2780 - Milling cutters with tenon drive - Interchangeability dimensions for cutter arbors - Metric series
- ISO-2940-1 - Milling cutters mounted on centring arbors having a 7/24 taper - Fitting dimensions - Centring arbors
- ISO-2940-2 - Milling cutters mounted on centring arbors having a 7/24 taper - Inserted tooth cutters
- ISO-3337 - T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
- ISO-3338-1 - Cylindrical shanks for milling cutters - Part 1: Dimensional characteristics of plain cylindrical shanks
- ISO-3338-2 - Cylindrical shanks for milling cutters - Part 2: Dimensional characteristics of flatted cylindrical shanks
- ISO-3338-3 - Cylindrical shanks for milling cutters - Part 3: Dimensional characteristics of threaded shanks
- ISO-3855 - Milling cutters - Nomenclature
- ISO-3859 - Inverse dovetail cutters and dovetail cutters with cylindrical shanks
- ISO-3860 - Bore cutters with key drive - Form milling cutters with constant profile
- ISO-3940 - Tapered die-sinking cutters with parallel shanks
- ISO-6108 - Double equal angle cutters with plain bore and key drive
- ISO-6262-1 - End mills with indexable inserts - Part 1: End mills with flatted cylindrical shank
- ISO-6262-2 - End mills with indexable inserts - Part 2: End mills with Morse taper shank
- ISO-6462 - Face and shoulder milling cutters with indexable inserts - Dimensions
- ISO-6986 - Side and face milling (slotting) cutters with indexable inserts - Dimensions
- ISO-7755-1 - Hardmetal burrs - Part 1: General specifications
- ISO-7755-10 - Hardmetal burrs - Part 10: Conical round- (ball-) nose burrs (style L)
- ISO-7755-11 - Hardmetal burrs - Part 11: Conical pointed-nose burrs (style M)
- ISO-7755-12 - Hardmetal burrs - Part 12: Inverted cone burrs (style N)
- ISO-7755-2 - Hardmetal burrs - Part 2: Cylindrical burrs (style A)
- ISO-7755-3 - Hardmetal burrs - Part 3: Cylindrical round- (ball-) nose burrs (style C)
- ISO-7755-4 - Hardmetal burrs - Part 4: Spherical burrs (style D)
- ISO-7755-5 - Hardmetal burrs - Part 5: Oval burrs (style E)
- ISO-7755-6 - Hardmetal burrs - Part 6: Arch round- (ball-) nose burrs (style F)
- ISO-7755-7 - Hardmetal burrs - Part 7: Arch pointed-nose burrs (style G)
- ISO-7755-8 - Hardmetal burrs - Part 8: Flame burrs (style H)
- ISO-7755-9 - Hardmetal burrs - Part 9: 60 degrees and 90 degrees cone burrs (styles J and K)
- ISO-8688-1 - Tool life testing in milling - Part 1: Face milling
- ISO-8688-2 - Tool life testing in milling - Part 2: End milling
Other SDOs:
- DIN-ISO-11529-1 - Milling cutters - Designation - Part 1: Shank-type end mills of solid or tipped design
- DIN-ISO-11529-2 - Part 2: Shank-Type & Bore-Type Milling Cutters With Indexable Inserts, Milling Cutters
- EN-ISO-15641 - Milling Cutters for High-Speed Machining, Safety Requirements
- JIS-B-4210 - Tapered end mills
- JIS-B-4236 - Milling cutters -- Counterbores for hexagon socket head bolts
- SS-EN-ISO-15641 - Milling cutters for high speed machining - Safety requirements (ISO 15641:2001)
- SS-ISO-10145-1 - End mills with brazed helical hardmetal tips - Part 1: Dimensions of end mills with parallel shank (ISO 10145-1:2016, IDT)
- SS-ISO-10145-2 - End mills with brazed helical hardmetal tips - Part 2: Dimensions of end mills with 7/24 taper shank (ISO 10145-2:2016, IDT)
- SS-ISO-10911 - Solid hardmetal end mills with cylindrical shank - Dimensions (ISO 10911:2017, IDT)
- SS-ISO-11529 - Milling cutters - Designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges (ISO 11529:2013, IDT)
- SS-ISO-11529-1 - Milling cutters - Designation - Part 1: Shank-type end mills of solid or tipped design (ISO 11529-1:2005, IDT)
- SS-ISO-11529-2 - Milling cutters - Designation - Part 2: Shank-type and bore-type milling cutters with indexable inserts (ISO 11529-2:2005, IDT)
- SS-ISO-12197 - Woodruff keyseat cutters - Dimensions (ISO 12197:2016, IDT)
- SS-ISO-15917 - Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials (ISO 15917:2012, IDT)
- SS-ISO-1641-1 - End mills and slot drills - Part 1: Milling cutters with cylindrical shanks (ISO 1641-1:2016, IDT)
- SS-ISO-1641-2 - End mills and slot drills - Part 2: Dimensions and designation of milling cutters with Morse taper shanks (ISO 1641-2:2011, IDT)
- SS-ISO-1641-3 - End mills and slot drills - Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks (ISO 1641-3:2011, IDT)
- SS-ISO-22037 - Solid end mills with corner radii and cylindrical shanks made of hard cutting materials - Dimensions (ISO 22037:2007, IDT)
- SS-ISO-240 - Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels (ISO 240:2016, IDT)
- SS-ISO-2490 - Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module - Nominal dimensions (ISO 2490:2007, IDT)
- SS-ISO-2584 - Cylindrical cutters with plain bore and key drive - Metric series (ISO 2584:2016, IDT)
- SS-ISO-2585 - Slotting cutters with plain bore and key drive - Metric series (ISO 2585:1972, IDT)
- SS-ISO-2586 - Shell end mills with plain bore and tenon drive - Metric series (ISO 2586:1985, IDT)
- SS-ISO-2587 - Side and face milling cutters with plain bore and key drive - Metric series (ISO 2587:1972, IDT)
- SS-ISO-2780 - Milling cutters with tenon drive - Interchangeability dimensions for cutter arbors - Metric series (ISO 2780:2018, IDT)
- SS-ISO-3338-1 - Cylindrical shanks for milling cutters - Part 1: Dimensional characteristics of plain cylindrical shanks
- SS-ISO-3338-2 - Cylindrical shanks for milling cutters - Part 2: Dimensional characteristics of flatted cylindrical shanks (ISO 3338-2:2013, IDT)
- SS-ISO-3338-3 - Cylindrical shanks for milling cutters - Part 3: Dimensional characteristics of threaded shanks
- SS-ISO-3860 - Bore cutters with key drive - Form milling cutters with constant profile (ISO 3860:2011, IDT)
- SS-ISO-6262-1 - End mills with indexable inserts - Part 1: End mills with flatted parallel shank (ISO 6262-1:2013, IDT)
- SS-ISO-6262-2 - End mills with indexable inserts - Part 2: End mills with Morse taper shank (ISO 6262-2:2013, IDT)
- SS-ISO-6462 - Face and shoulder milling cutters with indexable inserts - Dimensions (ISO 6462:2011, IDT)
- SS-ISO-6986 - Side and face milling (slotting) cutters with indexable inserts - Dimensions (ISO 6986:2013, IDT)
- SS-ISO-7755-1 - Hardmetal burrs - Part 1 : General specifications (ISO 7755-1:2013, IDT)
- SS-ISO-7755-10 - Hardmetal burrs - Part 10: Conical round- (ball-) nose burrs (style L) (ISO 7755-10:2013, IDT)
- SS-ISO-7755-11 - Hardmetal burrs - Part 11: Conical pointed-nose burrs (style M) (ISO 7755-11:2013, IDT)
- SS-ISO-7755-12 - Hardmetal burrs - Part 12: Inverted cone burrs (style N) (ISO 7755-12:2013, IDT)
- SS-ISO-7755-2 - Hardmetal burrs - Part 2: Cylindrical burrs (style A) (ISO 7755-2:2013, IDT)
- SS-ISO-7755-3 - Hardmetal burrs - Part 3: Cylindrical round- (ball-) nose burrs (style C) (ISO 7755-3:2013, IDT)
- SS-ISO-7755-4 - Hardmetal burrs - Part 4: Spherical burrs (style D) (ISO 7755-4:2013, IDT)
- SS-ISO-7755-5 - Hardmetal burrs - Part 5: Oval burrs (style E) (ISO 7755-5:2013, IDT)
- SS-ISO-7755-6 - Hardmetal burrs - Part 6: Arch round- (ball-) nose burrs (style F) (ISO 7755-6:2013, IDT)
- SS-ISO-7755-7 - Hardmetal burrs - Part 7: Arch pointed-nose burrs (style G) (ISO 7755-7:2013, IDT)
- SS-ISO-7755-8 - Hardmetal burrs - Part 8: Flame burrs (style H) (ISO 7755-8:2013, IDT)
- SS-ISO-7755-9 - Hardmetal burrs - Part 9: 60 degrees and 90 degrees cone burrs (styles J and K) (ISO 7755-9:2013, IDT)
- SS-ISO-8688-1 - Toollife testing in milling - Part 1: Face milling
- SS-ISO-8688-2 - Toollife testing in milling - Part 1: End milling