Document Center List of Standards on Forging Equipment. Presses. Shears
ICS Code 25.120.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-4656-34 - Accuracy of machine tools and methods of test
- BS-6979 - Method for measurement of static deflection of power presses
- BS-7568-10 - Press tools
- BS-7568-11 - Press tools
- BS-7568-17 - Press tools
- BS-7568-18 - Press tools
- BS-7568-19 - Press tools
- BS-7568-20 - Press tools
- BS-7568-21 - Press tools
- BS-7568-22 - Press tools
- BS-7568-23 - Press tools
- BS-7568-24 - Press tools
- BS-7568-25 - Press tools
- BS-7568-26 - Press tools
- BS-7568-27 - Press tools
- BS-7568-28 - Press tools
- BS-7568-29 - Press tools
- BS-7568-30 - Press tools
- BS-EN-12622 - Safety of machine tools. Hydraulic press brakes
- BS-EN-13736 - Safety of machine tools. Pneumatic presses
- BS-EN-13985 - Machine tools. Safety. Guillotine shears
- BS-EN-14656 - Safety of machinery. Safety requirements for extrusion presses for steel and non-ferrous metals
- BS-EN-14673 - Safety of machinery. Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
- BS-EN-16252 - Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements
- BS-EN-16500 - Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements
- BS-EN-50144-2-6 - Safety of hand-held electric motor operated tools. Particular requirements for hammers
- BS-EN-50260-2-6 - Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for hammers
- BS-EN-60745-2-8 - Subsea equipment
- BS-EN-62841-2-8 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-692 - Machine tools. Mechanical presses. Safety
- BS-EN-693 - Machine tools. Safety. Hydraulic presses
- BS-EN-ISO-16092-1 - Machine tools safety. Presses
- BS-EN-ISO-16092-2 - Machine tools safety. Presses
- BS-EN-ISO-16092-3 - Machine tools safety. Presses
- BS-ISO-10069-1 - Tools for pressing. Elastomer pressure springs
- BS-ISO-10069-2 - Tools for pressing. Elastomer pressure springs
- BS-ISO-10071-1 - Tools for pressing. Ball-lock punches
- BS-ISO-10071-2 - Tools for pressing. Ball-lock punches
- BS-ISO-10242-1 - Tools for pressing. Punch holder shanks
- BS-ISO-10242-2 - Tools for pressing. Punch holder shanks
- BS-ISO-10242-3 - Tools for pressing. Punch holder shanks
- BS-ISO-10243 - Tools for pressing. Compression springs with rectangular section. Housing dimensions and colour coding
- BS-ISO-11415 - Tools for pressing. Die sets
- BS-ISO-11900-1 - Tools for pressing. Ball-lock punch retainers
- BS-ISO-11900-2 - Tools for pressing. Ball-lock punch retainers
- BS-ISO-11901-1 - Tools for pressing. Gas springs
- BS-ISO-11901-2-TC - Tracked Changes. Tools for pressing. Gas springs
- BS-ISO-11901-3 - Tools for pressing. Gas springs
- BS-ISO-11901-3-TC - Tracked Changes. Tools for pressing. Gas springs
- BS-ISO-11901-4 - Tools for pressing. Gas springs
- BS-ISO-11901-4-TC - Tracked Changes. Tools for pressing. Gas springs
- BS-ISO-11901-5 - Tools for pressing. Gas springs
- BS-ISO-11903 - Tools for pressing. Guide pillar mountings
- BS-ISO-16366 - Tools for pressing. L-shaped guides
- BS-ISO-16367 - Tools for pressing. Guide plates. U- and V-blocks
- BS-ISO-18084 - Press tools for tablets. Punches and dies
- BS-ISO-20928 - Tools for pressing. Spring plungers with helicoidal compression steel spring or gas spring
- BS-ISO-20929 - Tools for pressing. Heel guidings in large stamping and forming dies
- BS-ISO-21223 - Tools for pressing. Vocabulary
- BS-ISO-23480 - Tools for pressing. Sliding plates
- BS-ISO-23481 - Tools for pressing. Cam driver plates
- BS-ISO-6752 - Tools for pressing. Round punches with 60 degrees conical head and straight shank
- BS-ISO-6753-1 - Tools for pressing and moulding. Machined plates
- BS-ISO-8020 - Tools for pressing. Punches with cylindrical head and straight or reduced shank
- BS-ISO-8695 - Tools for pressing. Punches. Nomenclature and terminology
- BS-ISO-8977 - Tools for pressing. Matrixes
- BS-ISO-9181 - Tools for pressing. Round punches with 60 conical head and reduced shank
- BS-ISO-9182-1 - Tools for pressing. Guide pillars
- BS-ISO-9182-2 - Tools for pressing. Guide pillars
- BS-ISO-9182-3 - Tools for pressing. Guide pillars
- BS-ISO-9182-4 - Tools for pressing. Guide pillars
- BS-ISO-9182-5 - Tools for pressing. Guide pillars
- BS-ISO-9183-1 - Tools for pressing. Wear plates for press dies
- BS-ISO-9183-2 - Tools for pressing. Wear plates for press dies
- BS-ISO-9448-1 - Tools for pressing. Guide bushes
- BS-ISO-9448-10 - Tools for pressing. Guide bushes
- BS-ISO-9448-11 - Tools for pressing. Guide bushes
- BS-ISO-9448-2 - Tools for pressing. Guide bushes
- BS-ISO-9448-3 - Tools for pressing. Guide bushes
- BS-ISO-9448-4 - Tools for pressing. Guide bushes
- BS-ISO-9448-5 - Tools for pressing. Guide bushes
- BS-ISO-9448-6 - Tools for pressing. Guide bushes
- BS-ISO-9448-7 - Tools for pressing. Guide bushes
- BS-ISO-9448-8 - Tools for pressing. Guide bushes
ISO:
- ISO-10069-1 - Tools for pressing - Elastomer pressure springs - Part 1: General specification
- ISO-10069-2 - Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories
- ISO-10071 - Tools for pressing - Ball-lock punches
- ISO-10071-1 - Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty
- ISO-10071-2 - Tools for pressing - Ball-lock punches - Part 2: Ball-lock punches for heavy duty
- ISO-10242-1 - Tools for pressing - Punch holder shanks - Part 1: Type A
- ISO-10242-2 - Tools for pressing - Punch holder shanks - Part 2: Type C
- ISO-10242-3 - Tools for pressing - Punch holder shanks - Part 3: Type D
- ISO-10243 - Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding
- ISO-10243-AM1 - Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding - Amendment 1
- ISO-11415 - Tools for pressing - Die sets
- ISO-11900-1 - Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty
- ISO-11900-2 - Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty
- ISO-11900-3 - Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced for heavy duty
- ISO-11901-1 - Tools for pressing - Gas springs - Part 1: General specifications
- ISO-11901-2 - Tools for pressing - Gas springs - Part 2: Specification of accessories
- ISO-11901-3 - Tools for pressing - Gas springs - Part 3: Gas spring with increased spring force and compact built height
- ISO-11901-4 - Tools for pressing - Gas springs - Part 4: Gas springs with increased spring force and same built height
- ISO-11901-5 - Tools for pressing - Gas springs - Part 5: Safety instructions for gas springs
- ISO-11903 - Tools for pressing - Guide pillar mountings
- ISO-16366 - Tools for pressing - L-shaped guides
- ISO-16367 - Tools for pressing - Guide plates - U- and V-blocks
- ISO-18084 - Press tools for tablets - Punches and dies
- ISO-20928 - Tools for pressing - Spring plungers with helicoidal compression steel spring or gas spring
- ISO-20929 - Tools for pressing - Heel guidings in large stamping and forming dies
- ISO-21223 - Tools for pressing - Vocabulary
- ISO-23480 - Tools for pressing - Sliding plates
- ISO-23481 - Tools for pressing - Cam driver plates
- ISO-6752 - Tools for pressing - Round punches with 60 degrees conical head and straight shank
- ISO-6753-1 - Tools for pressing and moulding - Machined plates - Part 1: Machined plates for press tools
- ISO-6898 - Open front mechanical power presses - Capacity ratings and dimensions
- ISO-6899 - Acceptance conditions of open front mechanical power presses - Testing of the accuracy
- ISO-8020 - Tools for pressing - Punches with cylindrical head and straight or reduced shank
- ISO-8540 - Open front mechanical power presses - Vocabulary
- ISO-8695 - Tools for pressing - Punches - Nomenclature and terminology
- ISO-8977 - Tools for pressing - Matrixes
- ISO-9181 - Tools for pressing - Round punches with 60 degrees conical head and reduced shank
- ISO-9182-1 - Tools for pressing - Guide pillars - Part 1: Types
- ISO-9182-2 - Tools for pressing - Guide pillars - Part 2: Type A, straight pillars
- ISO-9182-3 - Tools for pressing - Guide pillars - Part 3: Type B, end-locking pillars
- ISO-9182-4 - Tools for pressing - Guide pillars - Part 4: Type C, pillars with taper lead and bush
- ISO-9182-5 - Tools for pressing - Guide pillars - Part 5: Type D, end-locking pillars with flange
- ISO-9183-1 - Tools for pressing - Wear plates for press dies - Part 1: Type A
- ISO-9183-2 - Tools for pressing - Wear plates for press dies - Part 2: Type B
- ISO-9188 - Machine tools - Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force - Characteristics and dimensions
- ISO-9189 - Machine tools - Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force - Characteristics and dimensions
- ISO-9448-1 - Tools for pressing - Guide bushes - Part 1: Forms
- ISO-9448-10 - Tools for pressing - Guide bushes - Part 10: Form E, gliding bushes, flanged, type 2
- ISO-9448-11 - Tools for pressing - Guide bushes - Part 11: Form F, ball cage bushes, flanged, type 2
- ISO-9448-2 - Tools for pressing - Guide bushes - Part 2: Form A, gliding bushes, plain, type 1
- ISO-9448-3 - Tools for pressing - Guide bushes - Part 3: Form B, ball cage bushes, plain, type 1
- ISO-9448-4 - Tools for pressing - Guide bushes - Part 4: Form C, gliding bushes, headed, type 1
- ISO-9448-5 - Tools for pressing - Guide bushes - Part 5: Form D, ball cage bushes, headed, type 1
- ISO-9448-6 - Tools for pressing - Guide bushes - Part 6: Form E, gliding bushes, flanged, type 1
- ISO-9448-7 - Tools for pressing - Guide bushes - Part 7: Form F, ball cage bushes, flanged, type 1
- ISO-9448-8 - Tools for pressing - Guide bushes - Part 8: Form G, gliding bushes, stepped, type 1
- ISO-9448-9 - Tools for pressing - Guide bushes - Part 9: Form B, ball cage bushes, plain, type 2
Other SDOs:
- DIN-EN-13736 - Safety of Machine Tools - Pneumatic Presses
- DIN-EN-13985 - Machine Tools - Safety - Guillotine Shears
- DIN-EN-14656 - Safety of Machinery - Safety Requirements for Extrusion Presses for Steel & Non-Ferrou
- DIN-EN-14673 - Safety of Machinery - Safety Requirements for Hydraulically Powered Open Die Hot Forg
- DIN-EN-692 - Machine Tools - Mechanical Presses - Safety
- DIN-ISO-10071-2 - Part 2: Ball-Lock Punches for Heavy Duty, Tools for Pressing - Ball-Lock Punches
- DIN-ISO-11900-3 - Part 3: Type E, Reduced for Heavy Duty, Tools for Pressing, Ball-Lock Punch Retainers
- DIN-ISO-11901-1 - Tools for pressing -- Gas springs -- Part 1: General specifications
- DIN-ISO-11901-2 - Tools for pressing -- Gas springs -- Part 2: Specification of accessories
- DIN-ISO-11903 - Tools for Pressing, Guide Pillar Mountings
- DIN-ISO-16366 - Tools for Pressing, L-Shaped Guides (ISO 16366: 2001)
- DIN-ISO-16367 - Tools for Pressing - Guide Plates - U- & V-Blocks
- DIN-ISO-18084 - Press tools for tablets - Punches and dies (ISO 18084:2011)
- DIN-ISO-6753-1 - Part 1: Machined Plates for Press Tools, Tools for Pressing & Moulding - Machined Pla
- EN-12622 - Safety of machine tools - Hydraulic press brakes
- EN-13736 - Safety of Machine Tools - Pneumatic Presses
- EN-13985 - Machine Tools - Safety - Guillotine Shears
- EN-14656 - Safety of Machinery - Safety Requirements for Extrusion Presses for Steel & Non-Ferrou
- EN-14673 - Safety of Machinery - Safety Requirements for Hydraulically Powered Open Die Hot Forg
- EN-16252 - Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
- EN-16500 - Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
- EN-60745-2-8 - Hand-Held Motor-Operated Electric Tools, Safety, Particular Requirements for Shears &
- EN-692 - Machine tools. Mechanical presses. Safety
- JIS-B-6402 - Mechanical power presses -- Testing of the accuracy
- SMS-2337 - Forging tools. Fastening facilities for drop forging dies. Dovetails
- SS-EN-12622 - Safety of machine tools - Hydraulic press brakes
- SS-EN-1367-3 - Tests for thermal and weathering properties of aggregates - Part 3: Boiling test for "Sonnenbrand basalt"
- SS-EN-13736 - Safety of machine tools - Pneumatic presses
- SS-EN-13985 - Machine tools - Safety - Guillotine shears
- SS-EN-14656 - Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
- SS-EN-14673 - Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
- SS-EN-16252 - Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
- SS-EN-16500 - Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
- SS-EN-692 - Machine tools - Mechanical presses - Safety
- SS-EN-693 - Machine tools - Safety - Hydraulic presses
- SS-EN-ISO-12622 - Safety of machine tools - Hydraulic press brakes
- SS-EN-ISO-16092-3 - Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)
- SS-ISO-10069-1 - Tools for pressing - Elastomer pressure springs - Part 1: General specification (ISO 10069-1:2008, IDT)
- SS-ISO-10069-2 - Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:2008, IDT)
- SS-ISO-10071 - Tools for pressing - Ball-lock punches
- SS-ISO-10071-1 - Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty (ISO 10071-1:2008, IDT)
- SS-ISO-10071-2 - Tools for pressing - Ball-lock punches - Part 2: Ball-lock punches for heavy duty (ISO 10071-2:2005, IDT)
- SS-ISO-10242-1 - Tools for pressing - Punch holder shanks - Part 1: Type A (ISO 10242-1:2011, IDT)
- SS-ISO-10242-2 - Tools for pressing - Punch holder shanks - Part 2: Type C (ISO 10242-2:2008, IDT)
- SS-ISO-10242-3 - Tools for pressing - Punch holder shanks - Part 3: Type D (ISO 10242-3:2008, IDT)
- SS-ISO-10243 - Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding (ISO 10243:2019, IDT)
- SS-ISO-10243-AM1 - Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding - Amendment 1 (ISO 10243:2010/Amd 1:2011, IDT)
- SS-ISO-11415 - Tools for pressing - Die sets
- SS-ISO-11900-1 - Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007)
- SS-ISO-11900-2 - Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty (ISO 11900-2:2008, IDT)
- SS-ISO-11900-3 - Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced for heavy duty (ISO 11900-3:2004, IDT)
- SS-ISO-11901-1 - Tools for pressing - Gas springs - Part 1: General specifications (ISO 11901-1:2003, IDT)
- SS-ISO-11901-2 - Tools for pressing - Gas springs - Part 2: Specification of accessories (ISO 11901-2:2018, IDT)
- SS-ISO-11901-3 - Tools for pressing - Gas springs - Part 3: Gas spring with increased spring force and compact build height (ISO 11901-3:2014, IDT)
- SS-ISO-11901-4 - Tools for pressing - Gas springs - Part 4: Gas springs with increased spring force and same build height (ISO 11901-4:2021, IDT)
- SS-ISO-11901-5 - Tools for pressing Gas springs Part 5: Safety instructions for gas springs (ISO 11901-5:2021, IDT)
- SS-ISO-11903 - Tools for pressing - Guide pillar mountings (ISO 11903:2008, IDT)
- SS-ISO-16366 - Tools for pressing - L-shaped guides (ISO 16366:2008, IDT)
- SS-ISO-16367 - Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008, IDT)
- SS-ISO-18084 - Press tools for tablets - Punches and dies (ISO 18084:2011, IDT)
- SS-ISO-20928 - Tools for pressing - Spring plungers with helicoidal compression steel spring or gas spring (ISO 20928:2018, IDT)
- SS-ISO-20929 - Tools for pressing - Heel guidings in large stamping and forming dies (ISO 20929:2018, IDT)
- SS-ISO-21223 - Tools for pressing - Vocabulary (ISO 21223:2019, IDT)
- SS-ISO-23480 - Tools for pressing - Sliding plates (ISO 23480:2013, IDT)
- SS-ISO-23481 - Tools for pressing Cam driver plates (ISO 23481:2021, IDT)
- SS-ISO-6752 - Tools for pressing - Round punches with 60 degrees conical head and straight shank (ISO 6752:2008, IDT)
- SS-ISO-6753-1 - Tools for pressing and moulding - Machined plates - Part 1: Machined plates for press tools (ISO 6753-1:2005, IDT)
- SS-ISO-6898 - Open front mechanical power presses - Capacity rating and dimensions
- SS-ISO-6899 - Acceptance conditions of open front mechanical power presses - Testing of the accuracy
- SS-ISO-8020 - Tools for pressing - Punches with cylindrical head and straight or reduced shank (ISO 8020:2002, IDT)
- SS-ISO-8021 - Round punches with cylindrical head and straight shank
- SS-ISO-8695 - Tools for pressing - Punches - Nomenclature and terminology (ISO 8695:2010, IDT)
- SS-ISO-8977 - Tools for pressing - Matrixes
- SS-ISO-8978 - Tools for pressing - Guides for round punches
- SS-ISO-9181 - Tools for pressing - Round punches with 60 degrees conical head and reduced shank (ISO 9181:2007, IDT)
- SS-ISO-9182-1 - Tools for pressing - Guide pillars - Part 1: Types (ISO 9182-1:2013, IDT)
- SS-ISO-9182-2 - Tools for pressing - Guide pillars - Part 2: Type A, straight pillars (ISO 9182-2:2013, IDT)
- SS-ISO-9182-3 - Tools for pressing - Guide pillars - Part 3: Type B, end-locking pillars (ISO 9182-3:2020, IDT)
- SS-ISO-9182-4 - Tools for pressing - Guide pillars - Part 4: Type C, pillars with taper lead and bush (ISO 9182-4:2020, IDT)
- SS-ISO-9182-5 - Tools for pressing - Guide pillars - Part 5: Type D, end-locking pillars with flange (ISO 9182-5:2020, IDT)
- SS-ISO-9183-1 - Tools for pressing - Wear plates for press dies - Part 1: Type A (ISO 9183-1:2008, IDT)
- SS-ISO-9183-2 - Tools for pressing - Wear plates for press dies - Part 2: Type B (ISO 9183-2:2011, IDT)
- SS-ISO-9448-1 - Tools for pressing - Guide bushes - Part 1: Forms (ISO 9448-1:2013, IDT)
- SS-ISO-9448-10 - Tools for pressing - Guide bushes - Part 10: Form E, gliding bushes, flanged, type 2 (ISO 9448-10, IDT)
- SS-ISO-9448-2 - Tools for pressing - Guide bushes - Part 2: Form A, gliding bushes, plain, type 1 (ISO 9448-2:2013, IDT)
- SS-ISO-9448-3 - Tools for pressing - Guide bushes - Part 3: Form B, ball cage busches, plain, type 1 (ISO 9448-3:2013, IDT)
- SS-ISO-9448-4 - Tools for pressing - Guide bushes - Part 4: Form C, gliding bushes, headed, type 1 (ISO 9448-4:2013, IDT)
- SS-ISO-9448-5 - Tools for pressing - Guide bushes - Part 5: Form D, ball cage bushes, headed, type 1 (ISO 9448-5:2013, IDT)
- SS-ISO-9448-6 - Tools for pressing - Guide bushes - Part 6: Form E, gliding bushes, flanged, type 1 (ISO 9448-6:2013, IDT)
- SS-ISO-9448-7 - Tools for pressing - Guide bushes - Part 7: Form F, ball cage bushes, flanged, type 1 (ISO 9448-7:2013, IDT)
- SS-ISO-9448-8 - Tools for pressing - Guide bushes - Part 8: Form G, gliding bushes, stepped, type 1 (ISO 9448-8:2013, IDT)
- SS-ISO-9448-9 - Tools for pressing - Guide bushes - Part 9: Form B, ball cage bushes, plain, type 2 (ISO 9448-9:2013, IDT)