Document Center List of Standards on Hand-Operated Tools Including Wrenches, Screwdrivers, Pliers, Nippers, Hammers, Etc.
ICS Code 25.140.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-1842 - Specification for double-ended open-jawed spanners for B.A. hexagon sizes
- BS-192-1 - Open-ended wrenches
- BS-192-2 - Open-ended wrenches
- BS-2090 - Specification for hook spanners, peg spanners, coupling wrenches and the related slots, holes and horns
- BS-2558 - Specification for tubular box spanners
- BS-2558-S-1 - Metric sizes
- BS-2559 - Specification for screwdrivers and screwdriver accessories
- BS-2559-3 - Specification for screwdrivers
- BS-2583 - Specification for podger spanners
- BS-2589 - Specification for railway track spanners
- BS-3087-1 - Pliers and nippers
- BS-3087-10 - Pliers and nippers
- BS-3087-11 - Pliers and Nippers, Specification for Dimensions and Test Values of Slip Joint Pliers
- BS-3087-12 - Pliers and nippers
- BS-3087-13 - Pliers and nippers
- BS-3087-14 - Pliers and Nippers, Specification for Dimensions and Test Values of Multiple Slip Joint Pl
- BS-3087-2 - Pliers and nippers. Nomenclature
- BS-3087-3 - Pliers and nippers. Specification for general requirements
- BS-3087-4 - Pliers and nippers. Methods of test
- BS-3087-5 - Pliers and Nippers, Specification for Dimensions of Pliers for Gripping and Manipulating
- BS-3087-6 - Pliers and Nippers, Specification for Dimensions of Engineers and Lineman's Pliers
- BS-3087-7 - Pliers and nippers
- BS-3087-8 - Pliers and nippers. Specification for dimensions of end cutting nippers
- BS-3087-9 - Pliers and Nippers, Specification for Dimensions of Diagonal Cutting Nippers
- BS-3555 - Specification for ring wrenches
- BS-3594-1 - Specification for pipe wrenches
- BS-3594-2 - Specification for pipe wrenches
- BS-5310-2B - Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications. Hand crimping tools (removable and interchangeable dies, sizes A to G and Q to S) for radio frequency connectors and concentric contacts
- BS-6416 - Nomenclature for assembly tools for screws and nuts
- BS-7330-1 - Pliers & Nippers for Electronics, Nomenclature
- BS-7330-2 - Pliers & Nippers for Electronics, Specification for General Requirements
- BS-7330-3 - Pliers & Nippers for Electronics, Methods of Test
- BS-7330-5 - Specification for Dimensions of Single-Purpose Cutting Nippers
- BS-7586 - Specification for combination wrenches
- BS-7794 - Specification for square-drive sockets, driving squares and accessories for power-driven socket wrenches
- BS-876 - Specification for hand hammers
- BS-EN-50109-2-2 - Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications
- BS-EN-60745-2-1 - Hand-held motor-operated electric tools. Safety
- BS-EN-60745-2-2 - Hand-held motor-operated electric tools. Safety
- BS-EN-60745-2-23 - Hand-held motor-operated electric tools. Safety
- BS-EN-60745-2-4 - Hand-held motor-operated electric tools. Safety
- BS-EN-60745-2-5 - Hand-held motor-operated electric tools. Safety
- BS-EN-60745-2-8 - Subsea equipment
- BS-EN-62841-2-11 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-62841-2-11-TC - Tracked Changes. Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-62841-2-4 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-62841-2-8 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-IEC-62841-4-7 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety
- BS-EN-ISO-6789 - Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
- BS-EN-ISO-6789-1 - Assembly tools for screws and nuts. Hand torque tools
- BS-EN-ISO-6789-2 - Assembly tools for screws and nuts. Hand torque tools
- BS-IEC-62783-1-1 - Twinax cables for digital communications
- BS-IEC-63241-2-4 - Electric motor-operated tools. Dust measurement procedure
- BS-IEC-63241-2-6 - Electric motor-operated tools. Dust measurement procedure
- BS-ISO-10102 - Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Outside dimensions
- BS-ISO-10102-TC - Tracked Changes. Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Outside dimensions
- BS-ISO-10103 - Assembly tools for screws and nuts. Doubled-headed box wrenches, flat and offset. Outside dimensions and test torques
- BS-ISO-10103-TC - Tracked Changes. Assembly tools for screws and nuts. Doubled-headed box wrenches, flat and offset. Outside dimensions and test torques
- BS-ISO-10104 - Assembly tools for screws and nuts. Double-headed box wrenches, deep offset and modified offset. Outside dimensions
- BS-ISO-1085 - Assembly tools for screws and nuts. Double-ended wrenches. Size pairing
- BS-ISO-1085-TC - Tracked Changes. Assembly tools for screws and nuts. Double-ended wrenches. Size pairing
- BS-ISO-1173 - Assembly tools for screws and nuts. Drive ends for hand and machine-operated screwdriver bits and connecting parts. Dimensions, torque testing
- BS-ISO-1174-1 - Assembly tools for screws and nuts. Driving squares
- BS-ISO-21982 - Assembly tools for screws and nuts. Ratcheting wrenches. Technical requirements
- BS-ISO-2725-1 - Assembly tools for screws and nuts. Square drive sockets
- BS-ISO-2725-1-TC - Tracked Changes. Assembly tools for screws and nuts. Square drive sockets
- BS-ISO-3315-TC - Tracked Changes. Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests
- BS-ISO-3316 - Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests
- BS-ISO-3316-TC - Tracked Changes. Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests
- BS-ISO-3317 - Assembly tools for screws and nuts. Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
- BS-ISO-3318 - Assembly tools for screws and nuts. Open-ended wrenches, box wrenches and combination wrenches. Maximum widths of heads
- BS-ISO-4229 - Assembly tools for screws and nuts. Single-head engineer's wrenches for lower torque applications. Maximum outside dimensions of heads and test torques
- BS-ISO-4229-TC - Tracked Changes. Assembly tools for screws and nuts. Single-head engineer's wrenches for lower torque applications. Maximum outside dimensions of heads and test torques
- BS-ISO-5742 - Pliers and nippers. Nomenclature
- BS-ISO-5743 - Pliers and nippers. General technical requirements
- BS-ISO-5743-TC - Tracked Changes. Pliers and nippers. General technical requirements
- BS-ISO-5744 - Pliers and nippers. Methods of test
- BS-ISO-5745 - Pliers and nippers. Pliers for gripping and manipulating. Dimensions and test values
- BS-ISO-5746 - Pliers and nippers. Engineer's and Lineman's pliers. Dimensions and test values
- BS-ISO-5746-TC - Tracked Changes. Pliers and nippers. Engineer's and Lineman's pliers. Dimensions and test values
- BS-ISO-5748 - Pliers and nippers. End cutting nippers. Dimensions and test values
- BS-ISO-5749 - Pliers and nippers. Diagonal cutting nippers. Dimensions and test values
- BS-ISO-6787 - Assembly tools for screws and nuts. Adjustable wrenches
- BS-ISO-6787-TC - Tracked Changes. Assembly tools for screws and nuts. Adjustable wrenches
- BS-ISO-7738 - Assembly tools for screws and nuts. Combination wrenches. Lengths of wrenches and maximum thickness of heads
- BS-ISO-8976 - Pliers and nippers. Multiple slip joint pliers. Dimensions and test values
- BS-ISO-8976-TC - Tracked Changes. Pliers and nippers. Multiple slip joint pliers. Dimensions and test values
- BS-ISO-8979 - Pliers and nippers for electronics. Nomenclature
- BS-ISO-9343 - Pliers and nippers. Slip joint pliers. Dimensions and test values
- BS-ISO-9343-TC - Tracked Changes. Pliers and nippers. Slip joint pliers. Dimensions and test values
- BS-ISO-9654 - Pliers and nippers for electronics. Single purpose nippers. Cutting nippers
- BS-ISO-9655 - Pliers and nippers for electronics. Single-purpose nippers. Pliers for gripping and manipulating
- BS-ISO-9656 - Pliers and nippers for electronics. Test methods
- BS-ISO-9657 - Pliers and nippers for electronics. General technical requirements
IEC:
- IEC-60745-2-1 - Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
- IEC-60745-2-1-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
- IEC-60745-2-2 - Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
- IEC-60745-2-2-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
- IEC-60745-2-4 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
- IEC-60745-2-5 - Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
- IEC-60745-2-8 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
- IEC-60745-2-8-1 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers
- IEC-62841-2-11 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
- IEC-62841-4-7 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators
- IEC-63241-1 - Electric motor-operated tools - Dust measurement procedure - Part 1: General requirements
- IEC-63241-2-3 - Electric motor-operated tools - Dust measurement procedure - Part 2-3: Particular requirements for hand-held concrete grinders and disc-type sanders
- IEC-63241-2-4 - Electric motor-operated tools - Dust measurement procedure - Part 2-4: Particular requirements for hand-held sanders
- IEC-63241-2-6 - Electric motor-operated tools - Dust measurement procedure - Part 2-6: Particular requirements for hand-held hammers
ISO:
- ISO-10102 - Assembly tools for screws and nuts - Double-headed open-ended engineers wrenches - Outside dimensions
- ISO-10103 - Assembly tools for screws and nuts - Doubled-headed box wrenches, flat and offset - Outside dimensions and test torques
- ISO-10104 - Assembly tools for screws and nuts - Double-headed box wrenches, deep offset and modified offset - Outside dimensions
- ISO-1085 - Assembly tools for screws and nuts - Double-ended wrenches - Size pairing
- ISO-1173 - Assembly tools for screws and nuts -- Drive ends for hand- and machine-operated screwdriver bits and connecting parts -- Dimensions, torque testing
- ISO-1174-1 - Assembly tools for screws and nuts - Driving squares - Part 1: Driving squares for hand socket tools
- ISO-15601 - Hammers -- Technical specifications concerning steel hammer heads -- Test procedures
- ISO-1711 - Hand operated wrenches and sockets -- Technical specifications
- ISO-21982 - Assembly tools for screws and nuts - Ratcheting wrenches - Technical requirements
- ISO-2236 - Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions
- ISO-2352 - Assembly tools for screws and nuts -- Spiral ratchet screwdriver ends -- Dimensions
- ISO-2725-1 - Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets
- ISO-2936 - Assembly tools for screws and nuts - Hexagon socket screw keys
- ISO-3315 - Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests
- ISO-3316 - Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests
- ISO-3317 - Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
- ISO-3318 - Assembly tools for screws and nuts - Open-ended wrenches, box wrenches and combination wrenches - Maximum widths of heads
- ISO-4229 - Assembly tools for screws and nuts - Single-head engineers wrenches for lower torque applications - Maximum outside dimensions of heads and test torques
- ISO-5742 - Pliers and nippers - Nomenclature
- ISO-5743 - Pliers and nippers - General technical requirements
- ISO-5744 - Pliers and nippers - Methods of test
- ISO-5745 - Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values
- ISO-5746 - Pliers and nippers - Engineers and Linemans pliers - Dimensions and test values
- ISO-5747 - Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values
- ISO-5748 - Pliers and nippers - End cutting nippers - Dimensions and test values
- ISO-5749 - Pliers and nippers - Diagonal cutting nippers - Dimensions and test values
- ISO-6787 - Assembly tools for screws and nuts - Adjustable wrenches
- ISO-6788 - Assembly tools for screws and nuts - Four-way socket wrenches - Dimensions and torque test
- ISO-6789 - Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure
- ISO-6789-1 - Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
- ISO-6789-2 - Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty
- ISO-691 - Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use
- ISO-7738 - Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads
- ISO-8764-1 - Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips
- ISO-8764-2 - Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
- ISO-8976 - Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
- ISO-8979 - Pliers and nippers for electronics - Nomenclature
- ISO-9242 - Pliers and nippers - Construction workers pincers - Dimensions and test values'
- ISO-9243 - Pliers and nippers - Carpenters pincers - Dimensions and test values'
- ISO-9343 - Pliers and nippers - Slip joint pliers - Dimensions and test values
- ISO-9654 - Pliers and nippers for electronics - Single-purpose nippers - Cutting nippers
- ISO-9655 - Pliers and nippers for electronics - Single-purpose pliers - Pliers for gripping and manipulating
- ISO-9656 - Pliers and nippers for electronics - Test methods
- ISO-9657 - Pliers and nippers for electronics - General technical requirements
Other SDOs:
- BS-IEC-63241-2-3 - Electric motor-operated tools. Dust measurement procedure
- DIN-EN-ISO-6789 - Assembly Tools for Screws and Nuts, Hand Torque Tools, Requirements and Test Methods for D
- DIN-ISO-1085 - Assembly Tools for Screws & Nuts - Double-Ended Wrenches - Size Pairing
- DIN-ISO-1711-1 - Part 1: Hand-Operated Wrenches & Sockets, Assembly Tools for Screws & Nuts
- DIN-ISO-2380-2 - Part 2: General Requirements, Lengths of Blades & Marking of Hand-Operated Screwdriver
- DIN-ISO-5743 - Pliers & Nippers - General Technical Requirements
- DIN-ISO-5744 - Pliers & Nippers - Methods of Test
- DIN-ISO-5745 - Pliers & Nippers - Pliers for Gripping & Manipulating - Dimensions & Test Values
- DIN-ISO-5746 - Pliers & Nippers - Engineer's & 'Lineman's' Pliers - Dimensions & Test Values
- DIN-ISO-5748 - Pliers & Nippers - End Cutting Nippers - Dimensions & Test Values
- DIN-ISO-5749 - Pliers & Nippers - Diagonal Cutting Nippers - Dimensions & Test Values
- DIN-ISO-691 - Assembly Tools for Screws & Nuts - Wrench & Socket Openings - Tolerances for General
- DIN-ISO-8764-2 - Part 2: General Requirements, Lengths of Blades & Marking of Hand-Operated Screwdriver
- DIN-ISO-8976 - Pliers & Nippers - Multiple Slip Joint Pliers - Dimensions & Test Values
- DIN-ISO-9343 - Pliers & Nippers - Slip Joint Pliers - Dimensions & Test Values
- DIN-ISO-9654 - Pliers & Nippers for Electronics - Single-Purpose Nippers - Cutting Nippers
- DIN-ISO-9655 - Pliers & Nippers for Electronics - Single-Purpose Pliers - Pliers for Gripping & Manip
- DIN-ISO-9656 - Pliers & Nippers for Electronics - Test Methods
- DIN-ISO-9657 - Pliers & Nippers for Electronics - General Technical Requirements
- EN-60745-2-2 - Part 2-2: Particular Requirements for Screwdrivers & Impact Wrenches, Hand-Held Motor
- EN-60745-2-23 - Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools
- EN-60745-2-4 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
- EN-60745-2-5 - Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
- EN-60745-2-8 - Hand-Held Motor-Operated Electric Tools, Safety, Particular Requirements for Shears &
- EN-ISO-6789 - Assembly Tools for Screws & Nuts, Hand Torque Tools, Requirements & Test Methods for D
- EN-ISO-6789-1 - Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
- EN-ISO-6789-2 - Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainly
- JIS-B-4636-1 - Socket wrenches -- 12.7 mm square drive
- SIS-9014 - Pliers and nippers - List of Swedish standards,Pliers and nippers - List of Swedish standards
- SMS-9014 - Pliers and nippers - List of Swedish standards
- SS-3391 - Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Torque testing
- SS-3469 - Adjustable wrenches - Width across flat up to 52 mm
- SS-3533 - Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches -Torque testing
- SS-EN-26789 - Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods (ISO 6789:1992)
- SS-EN-3710 - Aerospace series - Sockets, bi-hexagonal - Technical specification
- SS-EN-3711 - Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
- SS-EN-ISO-6789 - Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)
- SS-EN-ISO-6789-1 - Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017)
- SS-EN-ISO-6789-2 - Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainly (ISO 6789-2:2017)
- SS-ISO-10102 - Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Outside dimensions (ISO 10102:2018, IDT)
- SS-ISO-10103 - Assembly tools for screws and nuts - Doubled-headed box wrenches, flat and offset - Outside dimensions and test torques (ISO 10103:2018, IDT)
- SS-ISO-10104 - Assembly tools for screws and nuts - Double-headed box wrenches, deep offset and modified offset - Outside dimensions (ISO 10104:2018, IDT)
- SS-ISO-1085 - Assembly tools for screws and nuts - Double-ended wrenches - Size pairing (ISO 1085:2016, IDT)
- SS-ISO-10914 - Assembly tools for screws and nuts - Socket and wrenches for spline drive
- SS-ISO-1173 - Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing (ISO 1173:2001, IDT)
- SS-ISO-1174-1 - Assembly tools for screws and nuts - Driving squares - Part 1: Driving squares for hand socket tools (ISO 1174-1:2011, IDT)
- SS-ISO-1174-2 - Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools
- SS-ISO-15601 - Hammers - Technical specifications concerning steel hammer heads - Test procedures
- SS-ISO-1711-1 - Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2019, IDT)
- SS-ISO-1711-2 - Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets (impact) (ISO 1711-2:2019, IDT)
- SS-ISO-21982 - Assembly tools for screws and nuts - Ratcheting wrenches - Technical requirements (ISO 21982:2020, IDT)
- SS-ISO-2352 - Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions (ISO 2352:2000, IDT)
- SS-ISO-2380-1 - Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004, IDT)
- SS-ISO-2380-2 - Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004, IDT)
- SS-ISO-2725-1 - Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets (ISO 2725-1:2017, IDT)
- SS-ISO-2725-2 - Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets ("impact") (ISO 2725-2:2017, IDT)
- SS-ISO-2725-3 - Assembly tools for screws and nuts - Square drive sockets - Part 3: Machine-operated sockets ("non-impact") (ISO 2725-3:2016, IDT)
- SS-ISO-2936 - Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2014, IDT)
- SS-ISO-3315 - Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests (ISO 3315:2018, IDT)
- SS-ISO-3316 - Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests (ISO 3316:2018, IDT)
- SS-ISO-3317 - Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches (ISO 3317:2015, IDT)
- SS-ISO-3318 - Assembly tools for screws and nuts - Open-ended wrenches, box wrenches and combination wrenches - Maximum widths of heads (ISO 3318:2016, IDT)
- SS-ISO-4229 - Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques (ISO 4229:2017, IDT)
- SS-ISO-5393 - Rotary tools for threaded fasteners - Performance test method (ISO 5393:2017, IDT)
- SS-ISO-5742 - Pliers and nippers - Nomenclature (ISO 5742:2004, IDT)
- SS-ISO-5743 - Pliers and nippers - General technical requirements (ISO 5743:2021, IDT)
- SS-ISO-5744 - Pliers and nippers - Methods of test (ISO 5744:2004, IDT)
- SS-ISO-5745 - Pliers and nippers - Pliers for gripping and manipulating - Dimensions and test values (ISO 5745:2004, IDT)
- SS-ISO-5746 - Pliers and nippers - Engineer's and "Lineman's" pliers - Dimensions and test values (ISO 5746:2021, IDT)
- SS-ISO-5748 - Pliers and nippers - End cutting nippers - Dimensions and test values (ISO 5748:2004, IDT)
- SS-ISO-5749 - Pliers and nippers - Diagonal cutting nippers - Dimensions and test values (ISO 5749:2004, IDT)
- SS-ISO-6787 - Assembly tools for screws and nuts - Adjustable wrenches (ISO 6787:2018, IDT)
- SS-ISO-6788 - Assembly tools for screws and nuts - Four-way socket wrenches - Dimensions and torque test
- SS-ISO-6789 - Assembly tools for screws and nuts - Hand torque-tools - Requirements and test methods
- SS-ISO-691 - Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use (ISO 691:2005, IDT)
- SS-ISO-7738 - Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads (ISO 7738:2015, IDT)
- SS-ISO-8764-1 - Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips (ISO 8764-1:2004, IDT)
- SS-ISO-8764-2 - Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004, IDT)
- SS-ISO-8976 - Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (ISO 8976:2021, IDT)
- SS-ISO-8979 - Pliers and nippers for electronics - Nomenclature (ISO 8979:2004, IDT)
- SS-ISO-9242 - Pliers and nippers - Construction worker's pincers - Dimensions and test values
- SS-ISO-9243 - Pliers and nippers - Carpenter's pincers - Dimensions and test values
- SS-ISO-9343 - Pliers and nippers - Slip joint pliers - Dimensions and test values (ISO 9343:2021, IDT)
- SS-ISO-9654 - Pliers and nippers for electronics - Single-purpose nippers - Cutting nippers (ISO 9654:2004, IDT)
- SS-ISO-9655 - Pliers and nippers for electronics - Single-purpose nippers - Pliers for gripping and manipulating (ISO 9655:2004, IDT)
- SS-ISO-9656 - Pliers and nippers for electronics - Test methods (ISO 9656:2004, IDT)
- SS-ISO-9657 - Pliers and nippers for electronics - General technical requirements (ISO 9657:2004, IDT)