Document Center List of Standards on Liquid And Solid Fuel Burners
ICS Code 27.060.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D5986 - Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C
8 –C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy - ASTM-D6021 - Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
- ASTM-D6078 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) (Withdrawn 2021)
- ASTM-D6421 - Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
- ASTM-D6422 - Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends (Withdrawn 2007)
- ASTM-D6423 - Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
- ASTM-D6426 - Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
- ASTM-D6445 - Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009)
- ASTM-D6447 - Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
- ASTM-D6448 - Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
- ASTM-D6468 - Standard Test Method for High Temperature Stability of Middle Distillate Fuels
- ASTM-D6469 - Standard Guide for Microbial Contamination in Fuels and Fuel Systems
- ASTM-D6483 - Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)
- ASTM-D6514 - Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- ASTM-D6550 - Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
- ASTM-D6596 - Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
- ASTM-D6615 - Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
- ASTM-E2154 - Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
- ASTM-PS121 - Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
BSI:
- BS-1846-1 - Glossary of terms relating to solid fuel burning equipment
- BS-1846-2 - Glossary of terms relating to solid fuel burning equipment. Industrial water heating and steam raising installations
- BS-3376 - Specification for open fires burning solid mineral fuels with convection, with or without boilers
- BS-5410-1 - Code of practice for liquid fuel firing
- BS-5410-1-TC - Tracked Changes. Code of practice for liquid fuel firing
- BS-5410-2 - Code of practice for liquid fuel firing
- BS-5410-2-TC - Tracked Changes. Code of practice for liquid fuel firing
- BS-5410-3 - Liquid fuel firing
- BS-5410-3-TC - Tracked Changes. Liquid fuel firing
- BS-799-2 - Oil burning equipment. Specification for vaporizing burners
- BS-799-3 - Oil burning equipment. Automatic and semi-automatic atomizing burners up to 36 litres per hour
- BS-799-4 - Oil burning equipment
- BS-799-6 - Specification for oil burning equipment. Safety times and safety, control and monitoring devices for atomizing oil burners of the monobloc type
- BS-799-7 - Specification for Dimensions of Atomizing Oil Burner Pumps With Rotating Shaft & Exter
- BS-799-8 - Oil burning equipment. Specification for connecting dimensions between atomizing oil burners and heat generators
- BS-8303 - Installation of domestic heating and cooking appliances burning wood and solid mineral fuels. Specification
- BS-EN-12514 - Components for supply systems for consuming units with liquid fuels
- BS-EN-12514-1 - Installations for oil supply systems for oil burners
- BS-EN-12514-2 - Installations for oil supply systems for oil burners
- BS-EN-225-1 - Atomizing oil burners. Oil burner pumps and oil burner motors. Connecting dimensions
- BS-EN-225-2 - Atomizing oil burners. Oil burner pumps and oil burner motors. Connecting dimensions
- BS-EN-230 - Automatic burner control systems for oil burners
- BS-EN-264 - Specification for Safety Requirements and Testing of Safety Shut-Off Devices for Comb
- BS-EN-267 - Forced draught burners for liquid fuels
- BS-EN-299 - Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
- BS-EN-ISO-23553-1 - Safety and control devices for oil burners and oil-burning appliances. Particular requirements
- BS-EN-ISO-23553-1-TC - Tracked Changes. Safety and control devices for oil burners and oil-burning appliances. Particular requirements
- BS-EN-ISO-6806 - Rubber hoses and hose assemblies for use in oil burners. Specification
- BS-EN-ISO-6806-TC - Tracked Changes. Rubber hoses and hose assemblies for use in oil burners. Specification
- PD-6434 - Recommendations for the design and testing of smoke reducing solid fuel burning domestic appliances
ISO:
- ISO-22968 - Forced draught oil burners
- ISO-23553-1 - Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves
- ISO-6806 - Rubber hoses and hose assemblies for use in oil burners - Specification
Other SDOs:
- DIN-EN-230 - Automatic Burner Control Systems for Oil Burners
- EN-225-1 - Part 1: Oil Burner Pumps, Atomizing Oil Burners - Oil Burner Pumps & Oil Burner Motors
- EN-225-2 - Atomizing Oil Burners, Oil Burner Pumps & Oil Burner Motors, Connecting Dimensions, Oi
- EN-230 - Automatic Burner Control Systems for Oil Burners
- EN-267 - Automatic Forced Draught Burners for Liquid Fuels
- EN-299 - Oil Pressure Atomizing Nozzles - Determination of the Angle & Spray Characteristics
- EN-ISO-23553-1 - Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves
- EN-ISO-6806 - Rubber hoses and hose assemblies for use in oil burners - Specification
- JIS-S-3019 - Oil control valves for oil burning appliances
- SS-EN-12514 - Components for supply systems for consuming units with liquid fuels
- SS-EN-12514-1 - Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests ; Parts, oil feed pumps, control and safety devices, supply tanks
- SS-EN-12514-2 - Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; Parts, valves, pipes, filters, oil de-aerators, meters
- SS-EN-225 - Atomizing oil burners - Pumps with rotating shaftand external drive - Dimensions
- SS-EN-225-1 - Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps
- SS-EN-225-2 - Atomizing oil burners - Oil burner pumps and oil burner motors-Connecting dimensions - Part 2: Oil burner motors
- SS-EN-226 - Atomizing oil burners - Connecting dimensions between burners and heat generators
- SS-EN-230 - Automatic burner control systems for oil burners
- SS-EN-264 - Safety shut-off devices for combustion plants using liquid fuels - Safety requirements and testing
- SS-EN-267 - Forced draught burners for liquid fuels
- SS-EN-267-AM1 - Safety shut-off and control devices for monobloc oil burners
- SS-EN-293 - Oil pressure atomizing nozzles - Minimum requirements - Testing
- SS-EN-298 - Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
- SS-EN-299 - Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
- SS-EN-ISO-23553-1 - Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2022)
- SS-EN-ISO-6806 - Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
- SS-ENV-299 - Oil pressure atomizing nozzles - Angle and spray characteristics