Document Center List of Standards on Nuclear Energy In General
ICS Code 27.120.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1009 - Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
- ASTM-C1210 - Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
- ASTM-C1215 - Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
- ASTM-C1562 - Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
- ASTM-C986 - Standard Guide for Developing Training Programs in the Nuclear Fuel Cycle (Withdrawn 2001)
- ASTM-C992 - Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in a Pool Environment
- ASTM-D3843 - Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
- ASTM-D4256 - Test Method for Determination of the Decontaminability of Coatins Used in Light-Water Nuclear Power Plants (Withdrawn 1995)
- ASTM-D8157 - Standard Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants
- ASTM-E1034 - Standard Specification for Nuclear Facility Transient Worker Records
- ASTM-E1297 - Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
- ASTM-E2216 - Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
- ASTM-E583 - Practice for Systematizing the Development of (ASTM) Voluntary Consensus Standards for the Solution of Nuclear and Other Complex Problems (Withdrawn 1995)
BSI:
- BS-3455 - Glossary of terms used in nuclear science and technology
- BS-5251 - Specification for analogue voltage ranges and logic levels for mains operated nuclear instruments
- BS-EN-60730-2-4 - Automatic electrical controls for household and similar use
- BS-EN-IEC-62976 - Industrial non-destructive testing equipment. Electron linear accelerator
- BS-EN-IEC-63047 - Nuclear instrumentation. Data format for list mode digital data acquisition used in radiation detection and measurement
- BS-EN-ISO-19443 - Quality management systems. Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)
- BS-IEC-62372 - Nuclear instrumentation. Housed scintillators. Test methods of light output and intrinsic resolution
- BS-IEC-62976 - Industrial non-destructive testing equipment. Electron linear accelerator
- BS-IEC-63046 - Nuclear power plants. Electrical power system. General requirements
- BS-IEC-63047 - Nuclear instrumentation. Data format for list mode digital data acquisition used in radiation detection and measurement
- BS-IEC-63148 - Tracking systems for radioactive materials. Requirements
- BS-IEC-63175 - Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV
- BS-ISO-19443 - Quality management systems. Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)
- CWA-16519 - Design and Construction Code for mechanical equipments of innovative nuclear installations
- PD-CEN-ISO-23406 - Nuclear sector. Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)
- PD-CEN-ISO-23406-TC - Tracked Changes. Nuclear sector. Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)
- PD-CEN-ISO-4450 - Quality management systems. Guidance for the application of ISO 19443:2018
- PD-ISO-23406 - Nuclear sector. Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)
- PD-ISO-4450 - Quality management systems. Guidance for the application of ISO 19443:2018
IEC:
- IEC-60050-395-AM2 - Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 395: Nuclear instrumentation - Physical phenomena, basic concepts, instruments, systems, equipment and detectors
- IEC-62372 - Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution
- IEC-62976 - Industrial non-destructive testing equipment - Electron linear accelerator
- IEC-62976-AM1 - Amendment 1 - Industrial non-destructive testing equipment - Electron linear accelerator
- IEC-63047 - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement
- IEC-63048 - Mobile remotely controlled systems for nuclear and radiological applications - General requirements
- IEC-63175 - Fixed energy high intensity proton cyclotron within the energy range of 10 MeV to less than 30 MeV
ISO:
- ISO-19443 - Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)
- ISO-19443-AM1 - - Amendment 1: Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) - Amendment 1: Climate action changes
- ISO-23406 - Nuclear sector - Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)
- ISO-4450 - Quality management systems - Guidance for the application of ISO 19443:2018
- ISO-921 - Nuclear energy - Vocabulary
Other SDOs:
- EN-IEC-62976 - Industrial non-destructive testing equipment - Electron linear accelerator (IEC 62976:2017)
- SIS-CEN-ISO/TR-4450 - Quality management systems - Guidance for the application of ISO 19443:2018 (ISO/TR 4450:2020)
- SIS-CWA-16519 - Design and Construction Code for mechanical equipments of innovative nuclear installations
- SIS-CWA-17377 - Design and Construction Codes for Gen II to IV nuclear facilities (pilot case for process for evolution of AFCEN codes)
- SIS-ISO-23406 - Nuclear sector - Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)
- SIS-ISO/TR-4450 - Quality management systems Recommendations for the application of ISO 19443 (ISO/TR 4450:2020)
- SS-EN-ISO-19111-2 - Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values (ISO 19111-2:2009)
- SS-EN-ISO-19226 - Nuclear energy - Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals (ISO 19226:2017)
- SS-EN-ISO-19443 - Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) (ISO 19443:2018)
- SS-EN-ISO-20031 - Radiological protection - Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides (ISO 20031:2020)
- SS-EN-ISO-9978 - Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020)
- SS-ISO-12749-1 - Nuclear energy - Vocabulary - Part 1: General terminology (ISO 12749-1:2020, IDT)
- SS-ISO-19013-1 - Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels (ISO 19013-1:2019, IDT)
- SS-ISO-19226 - Nuclear energy - Determination of neutron fluence and displacement per atom (dpa) in reactor vessel and internals (ISO 19226:2017, IDT)
- SS-ISO-19443 - Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) (ISO 19443:2018, IDT)
- SS-ISO-20031 - Radiological protection - Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides (ISO 20031:2020, IDT)
- SS-ISO-20785-4 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 4: Validation of codes (ISO 20785-4:2019, IDT)
- SS-ISO-22127 - Dosimetry with radiophotoluminescent glass dosimeters for dosimetry audit in MV X-ray radiotherapy (ISO 22127:2019, IDT)
- SS-ISO-4037-3 - Radiological protection - X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence (ISO 4037-3:2019, IDT)
- SS-ISO-8690 - Measurement of radioactivity - Gamma ray and beta emitting radionuclides - Test method to assess the ease of decontamination of surface materials (ISO 8690:2020, IDT)
- SS-ISO-921 - Nuclear energy - Vocabulary (ISO 921:1997, IDT)
- SS-ISO-9978 - Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020, IDT)
- SS-ISO/ASTM-51939 - Practice for blood irradiation dosimetry (ISO/ASTM 51939, IDT)