Document Center List of Standards on Refrigerating Technology Air-Conditioners, See 23.120 Refrigerants, See 71.100.45 Household Refrigerating Appliances, See 97.040.30 Commercial Refrigerating Appliances, See 97.130.20
ICS Code 27.200
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C1774 - Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
- ASTM-C740 - Standard Guide for Evacuated Reflective Insulation In Cryogenic Service
- ASTM-D6530 - Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
- ASTM-D7863 - Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
- ASTM-E1342 - Standard Practice for Preservation by Freezing, Freeze-Drying, and Low Temperature Maintenance of Bacteria, Fungi, Protista, Viruses, Genetic Elements, and Animal and Plant Tissues (Withdrawn 2011)
- ASTM-E1564 - Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials
- ASTM-E1565 - Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures
- ASTM-E1566 - Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen
BSI:
- BS-1586 - Methods for performance testing and presentation of performance data for refrigerant condensing units
- BS-1608 - Electrically Driven Refrigerant Condensing Units
- BS-3122-1 - Refrigerant compressors
- BS-3122-2 - Refrigerant compressors. Method for presentation of performance data
- BS-4434 - Specification for safety aspects in the design, construction and installation of refrigerating appliances and systems
- BS-5429 - Code of practice for safe operation of small-scale storage facilities for cryogenic liquids
- BS-7120 - Specification for rating and performance of air to liquid and liquid to liquid chilling packages
- BS-EN-1048 - Heat exchangers. Air cooled liquid coolers ('dry coolers'). Test procedures for establishing the performance
- BS-EN-12055 - Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements
- BS-EN-12178 - Refrigerating systems and heat pumps. Liquid level indicating devices. Requirements, testing and marking
- BS-EN-12178-TC - Tracked Changes. Refrigerating systems and heat pumps. Liquid level indicating devices. Requirements, testing and marking
- BS-EN-12300 - Cryogenic vessels. Cleanliness for cryogenic service
- BS-EN-12900 - Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data
- BS-EN-13136 - Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Methods for calculation
- BS-EN-13215 - Condensing units for refrigeration. Rating conditions, tolerances and presentation of manufacturer's performance data
- BS-EN-13313 - Refrigerating systems and heat pumps. Competence of personnel
- BS-EN-13771-1 - Compressors and condensing units for refrigeration. Performance testing and test methods
- BS-EN-13771-2 - Compressors and condensing units for refrigeration. Performance testing and test methods
- BS-EN-13771-2-TC - Tracked Changes. Compressors and condensing units for refrigeration. Performance testing and test methods
- BS-EN-14276-1 - Pressure equipment for refrigerating systems and heat pumps
- BS-EN-14276-2 - Pressure equipment for refrigerating systems and heat pumps
- BS-EN-14705 - Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers
- BS-EN-15218 - Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements
- BS-EN-15218-TC - Tracked Changes. Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements
- BS-EN-16147 - Heat pumps with electrically driven compressors. Testing, performance rating and requirements for marking of domestic hot water units
- BS-EN-16440-1 - Testing methodologies of refrigerating devices for insulated means of transport
- BS-EN-16440-2 - Testing methodologies for refrigerating devices for insulated means of transport
- BS-EN-17066-1 - Insulated means of transport for temperature sensitive goods. Requirements and testing
- BS-EN-17432 - Packaged refrigerating units for walk-in cold rooms. Classification, performance and energy consumption testing
- BS-EN-17893 - Thermal road vehicles. Temperature-controlled systems using flammable refrigerants for transport of goods. Requirements and risk analysis process
- BS-EN-255-2 - Air Conditioners, Liquid Chilling Packages & Heat Pumps Withelectrically Driven Compre
- BS-EN-255-3 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode
- BS-EN-255-4 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors. Heating mode.Requirements for space heating and sanitary hot water units
- BS-EN-378-1 - Refrigerating systems and heat pumps. Safety and environmental requirements
- BS-EN-378-2 - Refrigerating systems and heat pumps. Safety and environmental requirements
- BS-EN-378-3 - Refrigerating systems and heat pumps. Safety and environmental requirements
- BS-EN-378-3-TC - Tracked Changes. Refrigerating systems and heat pumps. Safety and environmental requirements
- BS-EN-378-4 - Refrigerating systems and heat pumps. Safety and environmental requirements
- BS-EN-50676 - Electrical equipment used for detection and concentration measurement of refrigerant gases. Performance requirements and test methods
- BS-EN-ISO-14903 - Refrigerating systems and heat pumps. Qualification of tightness of components and joints
- BS-EN-ISO-21922 - Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
- BS-EN-ISO-21922-TC - Tracked Changes. Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
- BS-EN-ISO-22712 - Refrigerating systems and heat pumps. Competence of personnel
- BS-EN-ISO-22712-TC - Tracked Changes. Refrigerating systems and heat pumps. Competence of personnel
- BS-EN-ISO-24664 - Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Methods for calculation
- BS-ISO-13971 - Refrigeration systems and heat pumps. Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes. Requirements and classification
- BS-ISO-14903 - Refrigerating systems and heat pumps. Qualification of tightness of components and joints
- BS-ISO-5149-1 - Refrigerating systems and heat pumps. Safety and environmental requirements
- BS-ISO-5149-2 - Refrigerating systems and heat pumps. Safety and environmental requirement
- BS-ISO-5149-3 - Refrigerating systems and heat pumps. Safety and environmental requirements
- BS-ISO-5149-4 - Refrigerating systems and heat pumps. Safety and environmental requirements
- DD-ENV-1048 - Heat exchangers. Air cooled liquid coolers 'dry coolers'. Test procedure for establishing the performance
- PAS-1018 - Indirect, temperature-controlled refrigerated delivery services. Land transport of refrigerated parcels with intermediate transfer. Specification
- PAS-1018 CANTONESE - Indirect, temperature-controlled refrigerated delivery services. Land transport of refrigerated parcels with intermediate transfer. Specification
- PAS-1018 MANDARIN - Indirect, temperature-controlled refrigerated delivery services. Land transport of refrigerated parcels with intermediate transfer. Specification
IEC:
ISO:
- ISO-11650 - Performance of refrigerant recovery and/or recycling equipment
- ISO-13971 - Refrigeration systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements and classification
- ISO-14903 - Refrigerating systems and heat pumps - Qualification of tightness of components and joints
- ISO-21922 - Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
- ISO-22712 - Refrigerating systems and heat pumps - Competence of personnel
- ISO-24664 - Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
- ISO-5149-1 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Definitions, classification and selection criteria
- ISO-5149-1-AM1 - - Amendment 1: Correction of QLAV, QLMV
- ISO-5149-1-AM2 - - Amendment 2: Update of Annex A and the refrigerant tables
- ISO-5149-2 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
- ISO-5149-2-AM1 - - Amendment 1
- ISO-5149-3 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site
- ISO-5149-4 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
- ISO-916 - Testing of refrigerating systems
- ISO-917 - Testing of refrigerant compressors
- ISO-9309 - Refrigerant compressors -- Presentation of performance data
Other SDOs:
- DIN-EN-12900 - Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data; German version EN 12900:2013
- DIN-EN-13136 - Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation; German version EN 13136:2013
- DIN-EN-13313 - Refrigerating Systems & Heat Pumps - Competence of Personnel
- DIN-EN-13741 - Thermal Performance Acceptance Testing of Mechanical Draughtseries Wet Cooling Towers
- DIN-EN-13771-1 - Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors; German version EN 13771-1:2016
- DIN-EN-14276-1 - Part 1: Vessels - General Requirements, Pressure Equipment for Refrigerating Systems &
- DIN-EN-14705 - Heat Exchangers, Method of Measurement & Evaluation of Thermal Performances of Wet Coo
- DIN-EN-15218 - Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements; German version EN 15218:2013
- EN-1048 - Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedures for establishing the performance
- EN-12178 - Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking
- EN-12213 - Cryogenic vessels - Methods for performance evaluation of thermal insulation
- EN-1252-1 - Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80 Degrees C
- EN-12900 - Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data
- EN-13136 - Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
- EN-13215 - Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data
- EN-13313 - Refrigerating Systems & Heat Pumps - Competence of Personnel
- EN-13771-1 - Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors
- EN-13771-2 - Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units
- EN-14276-1 - Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
- EN-14276-2 - Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
- EN-14705 - Heat Exchangers, Method of Measurement & Evaluation of Thermal Performances of Wet Coo
- EN-15218 - Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements
- EN-16084 - Refrigerating systems and heat pumps - Qualification of tightness of components and joints
- EN-16147 - Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units
- EN-16440-1 - Testing methodologies of refrigerating devices for insulated means of transport - Part 1: Mechanical cooling device with forced air circulation evaporator with or without heating device
- EN-17066-1 - Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container
- EN-255-3 - Part 3: Testing & Requirements for Marking for Sanitary Hotwater Units
- EN-378-1 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
- EN-378-2 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
- EN-378-3 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
- EN-378-4 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
- EN-ISO-14903 - Refrigerating systems and heat pumps - Qualification of tightness of components and joints
- JIS-B-8602 - Pipe flanges for refrigerants
- JIS-B-8607 - Flare type and brazing type fittings for refrigerants
- JIS-B-8622 - Absorption refrigerating machines
- SIS-CEN/TS-17606 - Installation of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards
- SIS-CEN/TS-17607 - Operation, servicing, maintenance, repair and decommissioning of refrigeration, air conditioning and heat pump equipment containing flammable refrigerants, complementing existing standards
- SS-EN-1048 - Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedures for establishing the performance
- SS-EN-1117 - Heat exchangers - Liquid cooled refrigerant condensers - Test procedures for establishing the performance
- SS-EN-1117-AM1 - Heat exchangers - Liquid cooled refrigerant condensers - Test procedures for establishing the performance
- SS-EN-1118 - Heat exchangers - Refrigerant cooled liquid coolers - Test procedures for establishing the performance
- SS-EN-1118-AM1 - Heat exchangers - Refrigerant cooled liquid coolers - Test procedures for establishing the performance
- SS-EN-12055 - Liquid chilling packages and heat pumps, with electrically driven compressors - Cooling mode - Definitions, testing and requirements
- SS-EN-12102 - Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
- SS-EN-12102-1 - Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers
- SS-EN-12178 - Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking
- SS-EN-12263 - Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
- SS-EN-12900 - Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data
- SS-EN-13136 - Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
- SS-EN-13136-AM1 - Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Method for calculation
- SS-EN-13215 - Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data
- SS-EN-13313 - Refrigerating systems and heat pumps - Competence of personnel
- SS-EN-13741 - Thermal performance acceptance testing of mechanical draught series wet cooling towers
- SS-EN-13771-1 - Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors
- SS-EN-13771-2 - Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units
- SS-EN-14128 - Durability of wood and wood-based products - Efficacy criteria for curative wood preservatives as determined by biological tests
- SS-EN-14276-1 - Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
- SS-EN-14276-2 - Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
- SS-EN-14422 - Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
- SS-EN-14511-1 - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions
- SS-EN-14511-2 - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions
- SS-EN-14511-3 - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods
- SS-EN-14511-4 - Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements
- SS-EN-14705 - Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers
- SS-EN-14825 - Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling, commercial and process cooling - Testing and rating at part load conditions and calculation of seasonal performance
- SS-EN-15218 - Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements
- SS-EN-16084 - Refrigerating systems and heat pumps - Qualification of tightness of components and joints
- SS-EN-16147 - Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units
- SS-EN-16440-1 - Testing methodologies of refrigerating devices for insulated means of transport - Part 1: Mechanical cooling device with forced air circulation evaporator with or without heating device
- SS-EN-16440-2 - Testing methodologies for refrigerating devices for insulated means of transport - Part 2: Eutectic cooling devices
- SS-EN-17066-1 - Insulated means of transport for temperature sensitive goods - Requirements and testing - Part 1: Container
- SS-EN-1736 - Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation
- SS-EN-17432 - Packaged refrigerating units for walk-in cold rooms - Classification, performance and energy consumption testing
- SS-EN-1797-1 - Cryogenic vessels - Gas/material compability - Part 1: Oxygen compability
- SS-EN-1861 - Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols
- SS-EN-255-1 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 1: Terms, definitions and designations
- SS-EN-255-2 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 2: Testing and requirements for marking for space heating units
- SS-EN-255-4 - Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 4: Requirements for space heating and sanitary hot water units
- SS-EN-378-1 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
- SS-EN-378-1-AM1 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
- SS-EN-378-2 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
- SS-EN-378-3 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
- SS-EN-378-3-AM1 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
- SS-EN-378-4 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
- SS-EN-378-4-AM1 - Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
- SS-EN-ISO-14903 - Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017)
- SS-EN-ISO-21922 - Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 21922:2021)
- SS-EN-ISO-22712 - Refrigerating systems and heat pumps - Competence of personnel (ISO 22712:2023)
- UNE-EN-ISO-21028-1 - Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 DegC