Document Center List of Standards on Magnetic Materials Steels With Special Magnetic Properties, See 77.140.40
ICS Code 29.030
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-A1036 - Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
- ASTM-A1054 - Standard Specification for Sintered Ferrite Permanent Magnets
- ASTM-A1071 - Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
- ASTM-A34 - Standard Practice for Sampling and Procurement Testing of Magnetic Materials
- ASTM-A340 - Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
- ASTM-A341 - Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
- ASTM-A342 - Standard Test Methods for Permeability of Weakly Magnetic Materials
- ASTM-A348 - Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
- ASTM-A596 - Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
- ASTM-A712 - Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
- ASTM-A719 - Standard Test Method for Lamination Factor of Magnetic Materials
- ASTM-A772 - Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
- ASTM-A773 - Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
- ASTM-A840M - Standard Specification for Fully Processed Magnetic Lamination Steel (Metric) (Withdrawn 2000)
- ASTM-A883 - Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials (Withdrawn 2006)
- ASTM-A889 - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
- ASTM-A893 - Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
- ASTM-A894 - Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials (Withdrawn 2017)
- ASTM-A900 - Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
- ASTM-A901 - Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
- ASTM-A977 - Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
BSI:
- BS-601-4 - Specification for steel sheet and strip for magnetic circuits of electrical apparatus. Thin magnetic steel, less than 0.25 mm thick
- BS-6200-3.12.5 - Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Permanent magnet alloys: volumetric method
- BS-6368 - Specification for axial lead cores made of magnetic oxides or iron powder
- BS-6404-11 - Magnetic materialsMethod of test for the determination of surface insulation resistance of magnetic sheet and strip
- BS-6404-13 - Methods of Measurement of Density, Resistivity and Stackingfactor of Electrical Steel
- BS-6404-5 - Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
- BS-6404-7 - Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
- BS-6404-8.1 - Magnetic materials. Individual materials. Magnetically hard materials
- BS-6404-8.8 - Magnetic materials. Individual materials. Specification for thin magnetic steel strip for use at medium frequencies
- BS-6404-9 - Magnetic materials. Methods for determination of the geometrical characteristics of magnetic steel sheet and strip
- BS-6786 - Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
- BS-EN-10251 - Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip
- BS-EN-10251-TC - Tracked Changes. Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip
- BS-EN-10280 - Magnetic materials. Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
- BS-EN-10282 - Magnetic materials. Method of test for the determination of surface insulation resistance of electrical sheet and strip
- BS-EN-10304 - Magnetic materials (iron and steel) for use in relays
- BS-EN-10330 - Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
- BS-EN-10331 - Magnetic materials. Specification for sintered soft magnetic materials
- BS-EN-10332 - Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
- BS-EN-10342 - Magnetic materials. Classification of surface insulations of electrical steel sheet, strip and laminations
- BS-EN-60404-1 - Magnetic materials
- BS-EN-60404-11 - Magnetic materials
- BS-EN-60404-13 - Magnetic materials
- BS-EN-60404-15 - Magnetic materials
- BS-EN-60404-2 - Magnetic materials
- BS-EN-60404-4 - Magnetic materials
- BS-EN-60404-5 - Magnetic materials
- BS-EN-60404-5-TC - Tracked Changes. Magnetic materials
- BS-EN-60404-8-1 - Magnetic materials
- BS-EN-60404-8-6 - Magnetic materials
- BS-EN-60404-8-6-TC - Tracked Changes. Magnetic materials
- BS-EN-60424-1 - Ferrite cores. Guidelines on the limits of surface irregularities
- BS-EN-60424-2 - Ferrite cores. Guidelines on the limits of surface irregularities
- BS-EN-60424-3 - Ferrite cores. Guidelines on the limits of surface irregularities
- BS-EN-IEC-60404-11 - Magnetic materials
- BS-EN-IEC-60404-11-TC - Tracked Changes. Magnetic materials
- BS-EN-IEC-60404-12 - Magnetic materials. Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet.
- BS-EN-IEC-60404-12-TC - Tracked Changes. Magnetic materials. Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet.
- BS-EN-IEC-60404-16 - Magnetic materials
- BS-EN-IEC-60404-3 - Magnetic materials
- BS-EN-IEC-60404-6 - Magnetic materials
- BS-EN-IEC-60404-8-11 - Magnetic materials
- BS-EN-IEC-61333 - Marking on ferrite cores
- BS-EN-IEC-63299 - Classification of magnetic powder cores
- BS-IEC-60404-1 - Magnetic materials
- BS-IEC-60404-8-5 - Magnetic materials
- BS-IEC-60404-8-7 - Magnetic materials
- BS-IEC-60404-8-8 - Magnetic materials
- PD-IEC-62331 - Pulsed field magnetometry
- PD-IEC-62383 - Determination of magnetic loss under magnetic polarization waveforms including higher harmonic components. Measurement, modelling and calculation methods
- PD-IEC-62517 - Magnetizing behaviour of permanent magnets
- PD-IEC-62518 - Rare earth sintered magnets. Stability of the magnetic properties at elevated temperatures
- PD-IEC-62797 - International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers
- PD-IEC-62981 - Studies and comparisons of magnetic measurements on grain-oriented electrical steelsheet determined by the single sheet test method and Epstein test method
- PD-IEC-63114 - Electrical steel. Reverse bend test method for electrical steel strip and sheet
IEC:
- IEC-1333 - Marking on U and E ferrite cores
- IEC-1609 - Microwave ferrite components - Guide for the drafting of specifications
- IEC-404-10 - Magnetic materials. Part 10: Methods of measurement of magnetic properties of magnetic sheet and strip at medium frequencies
- IEC-404-12 - Magnetic materials - Part 12: Guide to methods of assessment of temperature capability of interlaminar insulation coatings
- IEC-404-13 - Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
- IEC-404-5 - Magnetic materials - Part 5: Methods of measurement of magnetic properties of magnetically hard (permanent magnet) materials
- IEC-404-7 - Magnetic materials. Part 7: Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
- IEC-404-8-5 - Magnetic materials. Part 8: Specifications for individual materials. Section Five: Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
- IEC-404-8-8 - Magnetic materials - Part 8: Specifications for individual materials - Section 8: Specification for thin magnetic steel strip for use at medium frequencies
- IEC-404-8-9 - Magnetic materials - Part 8: Specifications for individual materials - Section 9: Standard specification for sintered soft magnetic materials
- IEC-404-9 - Magnetic materials. Part 9: Methods of determination of the geometrical characteristics of magnetic steel sheet and strip
- IEC-60050-221-3 - Amendment 3 - International Electrotechnical Vocabulary - Part 221: Magnetic materials and components
- IEC-60050-221-AM4 - Amendment 4 - International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components
- IEC-60404-1 - Magnetic materials - Part 1: Classification
- IEC-60404-10 - Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies
- IEC-60404-10-RL - Magnetic materials - Part 10: Methods of measurement of magnetic properties of electrical steel strip and sheet at medium frequencies
- IEC-60404-11 - Magnetic materials - Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet
- IEC-60404-1-1 - Magnetic materials - Part 1-1: Classification - Surface insulations of electrical steel sheet, strip and laminations
- IEC-60404-11-AM2 - Amendment 2 - Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
- IEC-60404-12 - Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet
- IEC-60404-13 - Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
- IEC-60404-14 - Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
- IEC-60404-15 - Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
- IEC-60404-15-AM1 - Amendment 1 - Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
- IEC-60404-17 - Magnetic materials - Part 17: Methods of measurement of the magnetostriction characteristics of grain-oriented electrical steel strip and sheet by means of a single sheet tester and an optical sensor
- IEC-60404-1-RL - Magnetic materials - Part 1: Classification
- IEC-60404-2 - Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
- IEC-60404-2-1 - Amendment 1 - Magnetic materials - Part 2: Methods of measurement of magnetic properties of electrical steel sheet and strip by means of an Epstein frame
- IEC-60404-3 - Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
- IEC-60404-3-1 - Amendment 1
- IEC-60404-3-RL - Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
- IEC-60404-4 - Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials
- IEC-60404-4-2 - Amendment 2 - Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials
- IEC-60404-5 - Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties
- IEC-60404-5-1 - Amendment 1 - Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties
- IEC-60404-5-RL - Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties
- IEC-60404-6 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
- IEC-60404-7 - Magnetic materials - Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit
- IEC-60404-8-1 - Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials
- IEC-60404-8-10 - Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays
- IEC-60404-8-2 - Part 8-2: Specifications for Individual Materials - Cold-Rolled Electrical Alloyed Steel S
- IEC-60404-8-3 - Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state
- IEC-60404-8-4 - Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
- IEC-60404-8-4-RL - Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
- IEC-60404-8-5 - Magnetic materials - Part 8-5: Specifications for individual materials - Electrical steel strip and sheet with specified mechanical properties and magnetic polarization
- IEC-60404-8-6 - Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
- IEC-60404-8-6-1 - Amendment 1 - Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
- IEC-60404-8-7 - Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
- IEC-60404-8-7-RL - Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
- IEC-60404-8-8 - Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies
- IEC-60404-9 - Magnetic materials - Part 9: Methods of determination of the geometrical characteristics of electrical steel strip and sheet
- IEC-61333 - Marking on ferrite cores
- IEC-61830 - Microwave Ferrite Components - Measuring Methods for Major Properties
- IEC-62044-3 - Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level
- IEC-62331 - Pulsed field magnetometry
- IEC-62383 - Determination of magnetic loss under magnetic polarization waveforms including higher harmonic components - Measurement, modelling and calculation methods
- IEC-62517 - Magnetizing behaviour of permanent magnets
- IEC-62518 - Rare earth sintered magnets - Stability of the magnetic properties at elevated temperatures
- IEC-62581 - Electrical steel - Methods of measurement of the magnetostriction characteristics by means of single sheet and Epstein test specimens
- IEC-62797 - International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers
- IEC-62981 - Studies and comparisons of magnetic measurements on grain-oriented electrical steelsheet determined by the single sheet test method and Epstein test method
- IEC-63114 - Electrical steel - Reverse bend test method of electrical steel strip and sheet
- IEC-63299 - Classification of magnetic powder cores
- IEC-63304 - Methods of measurement of the magnetic properties of permanent magnet (magnetically hard) materials in an open magnetic circuit using a superconducting magnet
Other SDOs:
- DIN-EN-10280 - Magnetic Materials - Methods of Measurement of the Magnetic Properties of Electrical
- DIN-EN-10330 - Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit; German version EN 10330:2015
- DIN-EN-10332 - Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties; German version EN 10332:2003
- DIN-EN-10342 - Magnetic Materials, Classification of Surface Insulations of Electrical Steel Sheet, S
- EN-10251 - Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
- EN-10280 - Magnetic Materials - Methods of Measurement of the Magnetic Properties of Electrical
- EN-10330 - Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
- EN-10342 - Magnetic Materials, Classification of Surface Insulations of Electrical Steel Sheet, S
- EN-60404-1 - Magnetic materials - Part 1: Classification
- EN-60404-11 - Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip
- EN-60404-13 - Magnetic Materials, Methods of Measurement of Density, Resistivity & Stacking Factor O
- EN-60404-15 - Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
- EN-60404-2 - Methods of Measurement of the Magnetic Properties of Electrical Steel Sheet & Strip By
- EN-60404-4 - Part 4: Methods of Measurement of D.C. Magnetic Properties of Magnetically Soft Materi
- EN-60404-5 - Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties
- EN-60404-8-1 - Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials
- EN-60404-8-6 - Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
- EN-60424-1 - Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification
- EN-IEC-60404-13 - Magnetic materials - Part 13: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
- EN-IEC-60404-16 - Magnetic materials - Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
- EN-IEC-60404-6 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
- EN-IEC-60404-8-11 - Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state
- JIS-C-2502 - Materials for permanent magnet
- JIS-C-2531 - Nickel iron soft magnetic metallic materials
- JIS-C-2552 - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state
- JIS-C-2553 - Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state
- SS-EN-10106 - Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
- SS-EN-10107 - Grain-oriented electrical steel strip and sheet delivered in the fully processed state
- SS-EN-10126 - Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state
- SS-EN-10165 - Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
- SS-EN-10251 - Magnetic materials - methods of determination of the geometrical characteristics of electrical steel sheet and strip
- SS-EN-10252 - Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
- SS-EN-10265 - Magnetic materials - Specification for steel sheet and strip with mechanical properties and magnetic permeability
- SS-EN-10280 - Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
- SS-EN-10282 - Magnetic materials - Method of test for the determination of surface insulation resistance of magnetic sheet and strip
- SS-EN-10330 - Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
- SS-EN-10331 - Magnetic materials - Specification for sintered soft magnetic materials
- SS-EN-10332 - Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of mesurement of magnetic properties
- SS-EN-10341 - Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
- SS-EN-10342 - Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations