Document Center List of Standards on Other Standards Related To Lamps
ICS Code 29.140.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-469 - Specification for railway signalling lamps
- BS-4945 - Specification for functional and performance characteristics of miners' caplamps
- BS-5717 - Specification for transistorized ballasts for tubular fluorescent lamps
- BS-EN-13032-4 - Light and lighting. Measurement and presentation of photometric data of lamps and luminaires
- BS-EN-13272 - Railway applications. Electrical lighting for rolling stock in public transport systems
- BS-EN-13272-1 - Railway applications. Electrical lighting for rolling stock in public transport systems
- BS-EN-4706 - Aerospace series. LED colour and brightness ranking
- BS-EN-4731 - Aerospace series. Spectral quality of LED luminaires used with photoluminescent marking systems
- BS-EN-4828 - Aerospace series. Thermal drift of LED luminaires. Classification and measuring methods
- BS-EN-50294 - Measurement method of total input power of ballast-lamp circuits
- BS-EN-50311 - Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
- BS-EN-50705 - Lighting equipment with radio communication. Safety requirements
- BS-EN-60155 - Glow-starters for fluorescent lamps
- BS-EN-60810 - Lamps for road vehicles. Performance requirements
- BS-EN-60920 - Specification for Ballasts for Tubular Fluorescent Lamps. General & Safety Requirement
- BS-EN-60923 - Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements
- BS-EN-60925 - Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
- BS-EN-60926 - Specification for Auxiliaries for Lamps. Starting Devices (Other Than Glow Starters).
- BS-EN-61046 - Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
- BS-EN-61047 - D.C. or A.C. supplied electronic step-down convertors for filament lamps. Performance requirements
- BS-EN-61347-1 - Lamp controlgear
- BS-EN-61347-2-1 - Lamp controlgear
- BS-EN-61347-2-10 - Lamp controlgear
- BS-EN-61347-2-12 - Lamp controlgear
- BS-EN-61347-2-13 - Lamp controlgear
- BS-EN-61347-2-2 - Lamp controlgear
- BS-EN-61347-2-3 - Lamp control gear
- BS-EN-61347-2-4 - Lamp Controlgear. Particular Requirements for D.C. Supplied Electronic Ballasts for General Lighting
- BS-EN-61347-2-5 - Lamp Controlgear. Particular Requirements for D.C. Supplied Electronic Ballasts for Public Transport Lighting
- BS-EN-61347-2-6 - Lamp Controlgear. Particular Requirements for D.C. Supplied Electronic Ballasts for Aircraft Lighting
- BS-EN-61347-2-7 - Lamp controlgear
- BS-EN-61347-2-7-TC - Lamp controlgear
- BS-EN-61347-2-8 - Lamp controlgear
- BS-EN-61347-2-9 - Lamp controlgear
- BS-EN-62031 - LED modules for general lighting. Safety specifications
- BS-EN-62094-1 - Indicator light units for household and similar fixed-electrical installations
- BS-EN-62384 - D.C. or A.C. supplied electronic control gear for LED modules. Performance requirements
- BS-EN-62386-101 - Digital addressable lighting interface
- BS-EN-62386-102 - Digital addressable lighting interface
- BS-EN-62386-201 - Digital addressable lighting interface
- BS-EN-62386-201-TC - Tracked Changes. Digital addressable lighting interface
- BS-EN-62386-202 - Digital addressable lighting interface
- BS-EN-62386-203 - Digital addressable lighting interface
- BS-EN-62386-204 - Digital addressable lighting interface
- BS-EN-62386-205 - Digital addressable lighting interface
- BS-EN-62386-206 - Digital addressable lighting interface
- BS-EN-62386-207 - Digital addressable lighting interface
- BS-EN-62386-208 - Digital addressable lighting interface
- BS-EN-62386-209 - Digital addressable lighting interface
- BS-EN-62386-301 - Digital addressable lighting interface
- BS-EN-62386-302 - Digital addressable lighting interface
- BS-EN-62386-303 - Digital addressable lighting interface
- BS-EN-62386-304 - Digital addressable lighting interface
- BS-EN-62442-1 - Energy performance of lamp controlgear
- BS-EN-62442-2 - Energy performance of lamp controlgear
- BS-EN-62442-3 - Energy performance of lamp controlgear
- BS-EN-62493-TC - Tracked Changes. Assessment of lighting equipment related to human exposure to electromagnetic field
- BS-EN-62707-1 - LED-binning
- BS-EN-62717 - LED modules for general lighting. Performance requirements
- BS-EN-62733 - Programmable components in electronic lamp controlgear. General and safety requirements
- BS-EN-62756-1 - Digital load side transmission lighting control
- BS-EN-62776 - Double-capped LED lamps designed to retrofit linear fluorescent lamps. Safety specifications
- BS-EN-62811 - AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps). Performance requirements for low frequency squarewave operation
- BS-EN-62868 - Organic light emitting diode (OLED) panels for general lighting. Safety requirements
- BS-EN-62922 - Organic light emitting diode (OLED) panels for general lighting. Performance requirements
- BS-EN-IEC-60810 - Lamps, light sources and LED packages for road vehicles. Performance requirements
- BS-EN-IEC-61347-2-14 - Lamp controlgear
- BS-EN-IEC-62031 - LED modules for general lighting. Safety specifications
- BS-EN-IEC-62384 - DC or AC supplied electronic controlgear for LED modules. Performance requirements
- BS-EN-IEC-62386-101 - Digital addressable lighting interface
- BS-EN-IEC-62386-102 - Digital addressable lighting interface
- BS-EN-IEC-62386-103 - Digital addressable lighting interface
- BS-EN-IEC-62386-103-TC - Tracked Changes. Digital addressable lighting interface
- BS-EN-IEC-62386-104 - Digital addressable lighting interface
- BS-EN-IEC-62386-105 - Digital addressable lighting interface
- BS-EN-IEC-62386-150 - Digital addressable lighting interface. Particular requirements. Auxiliary power supply.
- BS-EN-IEC-62386-202 - Digital addressable lighting interface
- BS-EN-IEC-62386-207 - Digital addressable lighting interface
- BS-EN-IEC-62386-207-TC - Tracked Changes. Digital addressable lighting interface
- BS-EN-IEC-62386-216 - Digital addressable lighting interface
- BS-EN-IEC-62386-217 - Digital addressable lighting interface
- BS-EN-IEC-62386-218 - Digital addressable lighting interface
- BS-EN-IEC-62386-220 - Digital addressable lighting interface
- BS-EN-IEC-62386-221 - Digital addressable lighting interface
- BS-EN-IEC-62386-222 - Digital addressable lighting interface
- BS-EN-IEC-62386-224 - Digital addressable lighting interface
- BS-EN-IEC-62386-250 - Digital addressable lighting interface. Particular requirements. Integrated power supply (device type 49).
- BS-EN-IEC-62386-251 - Digital addressable lighting interface. Particular requirements. Memory bank 1 extension (device type 50).
- BS-EN-IEC-62386-252 - Digital addressable lighting interface
- BS-EN-IEC-62386-332 - Digital addressable lighting interface
- BS-EN-IEC-62386-333 - Digital addressable lighting interface
- BS-EN-IEC-62442-1 - Energy performance of lamp controlgear
- BS-EN-IEC-62442-1-TC - Tracked Changes. Energy performance of lamp controlgear
- BS-EN-IEC-62442-2-TC - Tracked Changes. Energy performance of lamp controlgear
- BS-EN-IEC-62442-3 - Energy performance of lamp controlgear
- BS-EN-IEC-62442-3-TC - Tracked Changes. Energy performance of lamp controlgear
- BS-EN-IEC-62868-1 - Organic light emitting diode (OLED) Light sources for general lighting. Safety
- BS-EN-IEC-62868-1-TC - Tracked Changes. Organic light emitting diode (OLED) Light sources for general lighting. Safety
- BS-EN-IEC-62868-2-1 - Organic light emitting diode (OLED) light sources for general lighting. Safety
- BS-EN-IEC-62868-2-2 - Organic light emitting diode (OLED) light sources for general lighting. Safety
- BS-EN-IEC-62868-2-3 - Organic light emitting diode (OLED) light sources for general lighting. Safety
- BS-EN-IEC-63013 - LED packages. Long-term luminous and radiant flux maintenance projection
- BS-EN-IEC-63103 - Lighting equipment. Non-active mode power measurement
- BS-EN-IEC-63128 - Lighting control interface for dimming. Analogue voltage dimming interface for electronic current sourcing controlgear
- BS-EN-IEC-63129 - Determination of inrush current characteristics of lighting products
- BS-EN-IEC-63146 - LED packages for general lighting. Specification sheet
- BS-EN-IEC-63286 - Flexible organic light emitting diode (OLED) panels for general lighting. Performance requirements
- BS-EN-IEC-63356-1 - LED light source characteristics
- DD-IEC/PAS-62707-1 - LED. Binning
- PD-IEC-62861 - Guidelines for principal component reliability testing for LED light sources and LED luminaires
- PD-IEC-62972 - General lighting. Organic light emitting diode (OLED) products and related equipment. Terms and definitions
- PD-IEC-63037 - Electrical interface specification for self ballasted lamps and controlgear in phase-cut dimmed lighting systems
- PD-IEC-63105 - Lighting systems and related equipment. Vocabulary
- PD-IEC-63425 - Connectivity for lighting systems
- PD-IEC/PAS-62815-1 - Cold cathode fluorescent lamps
- PD-IEC/PAS-62815-2 - Cold cathode fluorescent lamps
- PD-IEC/PAS-62816-1 - External electrode fluorescent lamps
- PD-IEC/PAS-62816-2 - External electrode fluorescent lamps
- PD-IEC/PAS-63166 - Zhaga interface specification Book 1 and Book 7
- PD-IEC-PAS-63324 - Zhaga interface specification Book 1 and Book 10
- PD-IEC-PAS-63328 - Zhaga interface specification Book 1 and Book 12
- PD-IEC-PAS-63329 - Zhaga interface specification Book 1 and Book 14
- PD-IEC-PAS-63421 - Zhaga Interface Specification Book 18 including Book 1. Outdoor Luminaire Extension Interface
- PD-IEC-PAS-63422 - Zhaga Interface Specification Book 20 including Book 1. Smart interface between indoor luminaires and sensing/communication modules
IEC:
- IEC-60810 - Lamps, light sources and LED packages for road vehicles - Performance requirements
- IEC-60810-1 - Amendment 1 - Lamps, light sources and LED packages for road vehicles - Performance requirements
- IEC-60810-2 - Amendment 2 - Lamps for road vehicles - Performance requirements
- IEC-60810-AM2 - Amendment 2 - Lamps, light sources and LED packages for road vehicles - Performance requirements
- IEC-60810-RL - Lamps, light sources and LED packages for road vehicles - Performance requirements
- IEC-61048-AM1 - Amendment 1 - Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
- IEC-61347-1 - Lamp controlgear - Part 1: General and safety requirements
- IEC-61347-1-1 - Amendment 1 - Lamp controlgear - Part 1: General and safety requirements
- IEC-61347-1-2 - Amendment 2 - Lamp controlgear - Part 1: General and safety requirements
- IEC-61347-1-AM1 - Amendment 1 - Lamp controlgear - Part 1: General and safety requirements
- IEC-61347-1-RL - Lamp controlgear - Part 1: General and safety requirements
- IEC-61347-2-1 - Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
- IEC-61347-2-10 - Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
- IEC-61347-2-10-1 - Amendment 1 - Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
- IEC-61347-2-11 - Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
- IEC-61347-2-1-1 - Amendment 1 - Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
- IEC-61347-2-11-AM1 - Amendment 1 - Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
- IEC-61347-2-12 - Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
- IEC-61347-2-1-2 - Amendment 2 - Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
- IEC-61347-2-12-AM1 - Amendment 1 - Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
- IEC-61347-2-13 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
- IEC-61347-2-13-AM1 - Amendment 1 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
- IEC-61347-2-14 - Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
- IEC-61347-2-2 - Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
- IEC-61347-2-2-1 - Amendment 1: Lamp Controlgear - Part 2-2: Particular Requirements for D.C. or a.C. Sup
- IEC-61347-2-2-2 - Amendment 2: Lamp Controlgear - Part 2-2: Particular Requirements for D.C. or a.C. Sup
- IEC-61347-2-3 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
- IEC-61347-2-3-1 - Amendment 1 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
- IEC-61347-2-3-2 - Amendment 2: Lamp Controlgear - Part 2-3: Particular Requirements for a.C. Supplied El
- IEC-61347-2-4 - Part 2-4: Particular Requirements for D.C. Supplied Electronic Ballasts for General Lighti
- IEC-61347-2-5 - Part 2-5: Particular Requirements for D.C. Supplied Electronic Ballasts for Public Transpo
- IEC-61347-2-6 - Part 2-6: Particular Requirements for D.C. Supplied Electronic Ballasts for Aircraft Light
- IEC-61347-2-7 - Lamp controlgear - Part 2-7: Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting (self-contained)
- IEC-61347-2-7-AM1 - Amendment 1 - Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
- IEC-61347-2-7-AM2 - Amendment 2 - Lamp controlgear - Part 2-7: Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting (self-contained)
- IEC-61347-2-8 - Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
- IEC-61347-2-8-1 - Corrigendum 1 - Amendment 1 - Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
- IEC-61347-2-9 - Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
- IEC-61347-2-9-1 - Amendment 1: Lamp Controlgear - Part 2-9: Particular Requirements for Ballasts for Dischar
- IEC-61347-2-9-2 - Amendment 2: Lamp Controlgear - Part 2-9: Particular Requirements for Ballasts for Dis
- IEC-62031 - LED modules for general lighting - Safety specifications
- IEC-62031-AM1 - Amendment 1 - LED modules for general lighting - Safety specifications
- IEC-62031-AM2 - Amendment 2 - LED modules for general lighting - Safety specifications
- IEC-62031-RL - LED modules for general lighting - Safety specifications
- IEC-62094-1 - Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements
- IEC-62384 - DC or AC supplied electronic controlgear for LED modules - Performance requirements
- IEC-62384/A1 - Amendment 1 - DC or AC supplied electronic control gear for LED modules - Performance requirements
- IEC-62384-RL - DC or AC supplied electronic controlgear for LED modules - Performance requirements
- IEC-62386-102 - Digital addressable lighting interface - Part 102: General requirements - Control gear
- IEC-62386-102-AM1 - Amendment 1 - Digital addressable lighting interface - Part 102: General requirements - Control gear
- IEC-62386-103-AM1 - Amendment 1 - Digital addressable lighting interface - Part 103: General requirements - Control devices
- IEC-62386-105 - Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware Transfer
- IEC-62386-150 - Digital addressable lighting interface . Part 150: Particular requirements - Auxiliary power supply
- IEC-62386-201 - Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0)
- IEC-62386-201-RL - Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0)
- IEC-62386-202 - Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1)
- IEC-62386-203 - Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2)
- IEC-62386-204 - Digital addressable lighting interface - Part 204: Particular requirements for control gear - Low voltage halogen lamps (device type 3)
- IEC-62386-205 - Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4)
- IEC-62386-206 - Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5)
- IEC-62386-207 - Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)
- IEC-62386-209 - Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8)
- IEC-62386-210 - Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9)
- IEC-62386-220 - Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally supplied emergency operation (device type 19)
- IEC-62386-221 - Digital addressable lighting interface - Part 221: Particular requirements for control gear - Demand response (device type 20)
- IEC-62386-250 - Digital addressable lighting interface - Part 250: Particular requirements - Integrated power supply (device type 49)
- IEC-62386-251 - Digital addressable lighting interface - Part 251: Particular requirements - Memory bank 1 extension (device type 50)
- IEC-62386-252 - Digital addressable lighting interface - Part 252: Particular requirements - Energy reporting (device type 51)
- IEC-62386-253 - Digital addressable lighting interface - Part 253: Particular requirements - Diagnostics and maintenance (device type 52)
- IEC-62386-301 - Digital addressable lighting interface - Part 301: Particular requirements - Input devices - Push buttons
- IEC-62386-302 - Digital addressable lighting interface - Part 302: Particular requirements - Input devices - Absolute input devices
- IEC-62386-303 - Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor
- IEC-62386-304 - Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor
- IEC-62386-305 - Digital addressable lighting interface - Part 305: Particular requirements - Input devices - Colour sensor
- IEC-62386-332 - Digital addressable lighting interface - Part 332: Particular requirements - Input devices - Feedback
- IEC-62442-1 - Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- IEC-62442-1-RL - Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
- IEC-62442-2 - Energy performance of lamp controlgear - Part 2: Controlgear for discharge lamps (excluding low-pressure mercury fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
- IEC-62442-2-RL - Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
- IEC-62442-3 - Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear
- IEC-62442-3-RL - Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear
- IEC-62493-AM1 - Amendment 1 - Assessment of lighting equipment related to human exposure to electromagnetic fields
- IEC-62707-1 - LED-binning - Part 1: General requirements and white colour grid intended for automotive applications intended for automotive applications
- IEC-62707-1-AM1 - Amendment 1 - LED-binning - Part 1: General requirements and white colour grid intended for automotive applications intended for automotive applications
- IEC-62717 - LED modules for general lighting - Performance requirements
- IEC-62717-AM1 - Amendment 1 - LED modules for general lighting - Performance requirements
- IEC-62717-AM2 - Amendment 2 - LED modules for general lighting - Performance requirements
- IEC-62733 - Programmable components in electronic lamp controlgear - General and safety requirements
- IEC-62756-1 - Digital load side transmission lighting control (DLT) - Part 1: Basic requirements
- IEC-62776 - Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
- IEC-62811 - AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave operation
- IEC-62838 - LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications
- IEC-62861 - Guidelines for principal component reliability testing for LED light sources and LED luminaires
- IEC-62868 - Organic light emitting diode (OLED) panels for general lighting - Safety requirements
- IEC-62868-1 - Organic light emitting diode (OLED) Light sources for general lighting - Safety - Part 1: General requirements and tests
- IEC-62868-2-1 - Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-1: Particular requirements - Semi-integrated OLED modules
- IEC-62868-2-2 - Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-2: Particular requirements - Integrated OLED modules
- IEC-62868-2-3 - Organic light emitting diode (OLED) light sources for general lighting - Safety - Part 2-3: Particular requirements - Flexible OLED tiles and panels
- IEC-62922 - Organic light emitting diode (OLED) panels for general lighting - Performance requirements
- IEC-62972 - General lighting - Organic light emitting diode (OLED) products and related equipment - Terms and definitions
- IEC-63013 - LED packages - Long-term luminous and radiant flux maintenance projection
- IEC-63037 - Electrical interface specifications for self ballasted lamps and controlgear in phase-cut dimmed lighting systems
- IEC-63037-RL - Electrical interface specifications for self ballasted lamps and controlgear in phase-cut dimmed lighting systems
- IEC-63103 - Lighting equipment - Non-active mode power measurement
- IEC-63105 - Lighting systems and related equipment - Vocabulary
- IEC-63128 - Lighting control interface for dimming . Analogue voltage dimming interface for electronic current sourcing controlgear
- IEC-63146 - LED packages for general lighting - Specification sheet
- IEC-63286 - Flexible organic light emitting diode (OLED) panels for general lighting - Performance requirements
- IEC-63356-1 - LED light source characteristics - Part 1: Data sheets
- IEC-63356-2 - LED light source characteristics - Part 2: Design parameters and values
- IEC-63425 - Connectivity for lighting systems
- IEC/PAS-62707-1 - LED-binning - Part 1: General requirements and white colour grid
- IEC/PAS-62717 - LED modules for general lighting - Performance requirements
- IEC/PAS-62815-1 - Cold cathode fluorescent lamps - Part 1: Safety specifications
- IEC/PAS-62815-2 - Cold cathode fluorescent lamps - Part 2: Performance specifications
- IEC/PAS-62816-1 - External electrode fluorescent lamps - Part 1: Safety specifications
- IEC/PAS-62816-2 - External electrode fluorescent lamps - Part 2: Performance specifications
- IEC/PAS-63324 - Zhaga interface specification Book 1 and Book 10
- IEC/PAS-63328 - Zhaga interface specification Book 1 and Book 12
- IEC/PAS-63329 - Zhaga interface specification Book 1 and Book 14
- IEC/PAS-63421 - Zhaga Interface Specification Book 18 including Book 1 - Outdoor Luminaire Extension Interface
- IEC/PAS-63422 - Zhaga Interface Specification Book 20 including Book 1 - Smart interface between indoor luminaires and sensing/communication modules
Other SDOs:
- EN-13032-4 - Light and lighting - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires
- EN-4706 - Aerospace series - LED colour and brightness ranking
- EN-4731 - Aerospace series - Spectral quality of LED luminaires used with photoluminescent marking systems
- EN-60810 - Lamps for road vehicles - Performance requirements
- EN-61048 - Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
- EN-61347-1 - Lamp controlgear - Part 1: General and safety requirements
- EN-61347-2-1 - Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
- EN-61347-2-10 - Part 2-10: Particular Requirements for Electronic Invertors & Converters for High-Fre
- EN-61347-2-11/A1 - Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires (IEC 61347-2-11:2001/A1:2017)
- EN-61347-2-13 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
- EN-61347-2-2 - Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
- EN-61347-2-3 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
- EN-61347-2-7 - Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
- EN-61347-2-7/A1 - Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self- contained) (IEC 61347-2-7:2011/A1:2017)
- EN-61347-2-9 - Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
- EN-62031 - LED modules for general lighting - Safety specifications
- EN-62384 - Dc or Ac Supplied Electronic Control Gear for Led Modules - Performance Requirements
- EN-62386-101 - Digital addressable lighting interface - Part 101: General requirements - System components
- EN-62386-102 - Digital addressable lighting interface - Part 102: General requirements - Control gear
- EN-62386-201 - Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0)
- EN-62386-202 - Part 202: Particular Requirements for Control Gear - Self-Contained Emergency Lighting
- EN-62386-203 - Part 203: Particular Requirements for Control Gear - Discharge Lamps (Excluding Fluore
- EN-62386-204 - Part 204: Particular Requirements for Control Gear - Low Voltage Halogen Lamps (Device
- EN-62386-205 - Part 205: Particular Requirements for Control Gear - Supply Voltage Controller for In
- EN-62386-206 - Part 206: Particular Requirements for Control Gear - Conversion From Digital Signal In
- EN-62386-207 - Part 207: Particular Requirements for Control Gear - Led Modules (Device Type 6), Digi
- EN-62386-208 - Part 208: Particular Requirements for Control Gear - Switching Fuction (Device Type 7)
- EN-62386-209 - Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8)
- EN-62386-301 - Digital addressable lighting interface - Part 301: Particular requirements - Input devices - Push buttons
- EN-62386-303 - Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor
- EN-62386-304 - Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor
- EN-62442-1 - Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- EN-62442-2 - Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
- EN-62442-3 - Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear
- EN-62707-1 - LED-binning - Part 1: General requirements and white colour grid
- EN-62733 - Programmable components in electronic lamp controlgear - General and safety requirements
- EN-62756-1 - Digital load side transmission lighting control - Part 1: Basic requirements
- EN-62776 - Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications
- EN-62811 - AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency squarewave operation
- EN-62868 - Organic light emitting diode (OLED) panels for general lighting - Safety requirements
- EN-62922 - Organic light emitting diode (OLED) panels for general lighting - Performance Requirements
- EN-IEC-60810 - Lamps, light sources and led packages for road vehicles - Performance requirements
- EN-IEC-61347-2-14 - Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
- EN-IEC-62386-104 - Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components (IEC 62386-104:2019)
- EN-IEC-62386-207 - Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)
- EN-IEC-62386-216 - Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15)
- EN-IEC-62386-217 - Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16)
- EN-IEC-62386-218 - Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming curve selection (device type 17)
- EN-IEC-62386-220 - Digital addressable lighting interface - Part 220: Particular requirements for control gear - Centrally supplied emergency operation (device type 19) (IEC 62386-220:2019)
- EN-IEC-62386-222 - Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21)
- EN-IEC-62386-224 - Digital addressable lighting interface - Part 224: Particular requirements for control gear - Non-replaceable light source (device type 23)
- EN-IEC-62386-333 - Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual configuration (feature type 33)
- EN-IEC-62442-1 - Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
- EN-IEC-62442-2 - Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
- EN-IEC-62442-3 - Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear
- EN-IEC-63128 - Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear (IEC 63128:2019)
- EN-IEC-63146 - LED packages for general lighting - Specification sheet (IEC 63146:2019)
- JIS-C-62868-1 - Organic light emitting diode (OLED) light sources for general lighting -- Safety-Part 1: General requirements and tests
- JIS-H-4460 - General rules for test of tungsten and molybdenum materials for lighting and electronic equipments
- JIS-H-4461 - Tungsten wires for lighting and electronic equipments
- JIS-H-4463 - Thoriated tungsten wires and rods for lighting and electronic equipment
- SS-EN-13032-4 - Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires
- SS-EN-4706 - Aerospace series - LED colour and brightness ranking
- SS-EN-4731 - Aerospace series - Spectral quality of LED luminaires used with photoluminescent marking systems
- SS-EN-4828 - Aerospace series - Thermal drift of LED luminaires - Classification and measuring methods
- SS-EN-61347-2-13 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
- UNE-EN-61347-1 - Lamp controlgear - Part 1: General and safety requirements