Document Center List of Standards on Rotating Machinery
ICS Code 29.160
Return to ICS Index.Up to Level 1:
Down to Level 3:
- 29.160.01 (Rotating machinery in general)
- 29.160.10 (Components for rotating machines)
- 29.160.20 (Generators)
- 29.160.30 (Motors)
- 29.160.40 (Generating sets)
- 29.160.99 (Other standards related to rotating machinery)
The following documents are a part of this series:
BSI:
- BS-EN-60034-14 - Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity
- BS-EN-60034-19 - Rotating electrical machines
- BS-EN-IEC-60034-18-1 - Rotating electrical machines
- PD-IEC-60034-27-2 - Rotating electrical machines
IEC:
- IEC-34-16-3 - Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance
- IEC-34-19 - Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies
- IEC-34-2A - Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery form tests (excluding machines for traction vehicles) - First supplement: Measurement of losses by the calorimetric method
- IEC-34-6 - Rotating electrical machines - Part 6: Methods of cooling (IC Code)
- IEC-34-7 - Rotating electrical machines - Part 7: Classification of types of constructions and mounting arrangements (IM Code)
- IEC-60034-1 - Rotating electrical machines - Part 1: Rating and performance
- IEC-60034-11 - Rotating electrical machines - Part 11: Thermal protection
- IEC-60034-12/AM 1 - Amendment 1 - Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- IEC-60034-14 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
- IEC-60034-14-1 - Amendment 1 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
- IEC-60034-15 - Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
- IEC-60034-16-1 - Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions
- IEC-60034-16-2 - Part 16: Excitation Systems for Synchronous Machines - Chapter 2: Models for Power Sys
- IEC-60034-17 - Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
- IEC-60034-18-1 - Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines
- IEC-60034-18-21 - Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification
- IEC-60034-18-31 - Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
- IEC-60034-18-32 - Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings
- IEC-60034-18-33 - Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
- IEC-60034-18-34 - Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
- IEC-60034-18-41 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests
- IEC-60034-18-42 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
- IEC-60034-19 - Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies
- IEC-60034-2-1 - Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
- IEC-60034-22 - Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
- IEC-60034-2-2 - Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1
- IEC-60034-2-3 - Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors
- IEC-60034-24 - Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide
- IEC-60034-25 - Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
- IEC-60034-26 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
- IEC-60034-27 - Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
- IEC-60034-27-2 - Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines
- IEC-60034-27-3 - Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- IEC-60034-28 - Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
- IEC-60034-29 - Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise
- IEC-60034-3 - Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
- IEC-60034-30 - Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
- IEC-60034-30-1 - Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
- IEC-60034-31 - Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guidelines
- IEC-60034-4 - Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests
- IEC-60034-5 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- IEC-60034-5-1 - Amendment 1 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- IEC-60034-7 - Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
- IEC-60034-7-1 - Amendment 1 Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
- IEC-60034-8 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation
- IEC-60034-8-AM1 - Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation
- IEC-60034-9 - Rotating electrical machines - Part 9: Noise limits
- IEC-60034-9-1 - Amendment 1 - Rotating electrical machines - Part 9: Noise limits
- IEC-72-1 - Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
- IEC-72-2 - Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
- IEC-72-3 - Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50
- IEC-88528-11 - Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods
- IEC/PAS-62072 - Natural Graphite Brush for Rotating Electrical Machinery - Basic Characteristics
Other SDOs:
- EN-60034-12 - Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- EN-60034-16-1 - Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions
- EN-60034-18-21 - Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification
- EN-60034-18-31 - Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
- EN-60034-18-32 - Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance
- EN-60034-18-34 - Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
- EN-60034-18-41 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests
- EN-60034-19 - Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies
- EN-60034-27-3 - Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
- EN-60034-30-1 - Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
- EN-IEC-60034-14 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
- EN-IEC-60034-4-1 - Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests