Document Center List of Standards on Rotating Machinery In General
ICS Code 29.160.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-4999-101 - General requirements for rotating electrical machines. Specification for rating and performance
- BS-4999-108 - Specification for Terminal Markings & Direction of Rotation
- BS-4999-115 - General requirements for rotating electrical machines. Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
- BS-4999-143 - Specification for Tests, General Requirements for Rotating Electrical Machines
- BS-4999-145 - General requirements for rotating electrical machines
- BS-4999-71 - Specification for general requirements for rotating electrical machines. Winding terminations
- BS-822-6 - Terminal markings for electrical machinery and apparatus
- BS-EN-60027-4 - Letter symbols to be used in electric technology
- BS-EN-60034-1 - Rotating electrical machines
- BS-EN-60034-12-TC - Tracked Changes. Rotating electrical machines
- BS-EN-60034-15 - Rotating electrical machines
- BS-EN-60034-16-1 - Rotating electrical machines
- BS-EN-60034-18-1 - Rotating electrical machines
- BS-EN-60034-18-21 - Rotating electrical machines
- BS-EN-60034-18-22 - Rotating electrical machines. Functional evaluation of insulation systems
- BS-EN-60034-18-31 - Rotating electrical machines
- BS-EN-60034-18-41 - Rotating electrical machines
- BS-EN-60034-18-42 - Rotating electrical machines
- BS-EN-60034-2 - Rotating electrical machines
- BS-EN-60034-2-1 - Rotating electrical machines
- BS-EN-60034-2-2 - Rotating electrical machines
- BS-EN-60034-27-3 - Rotating electrical machines
- BS-EN-60034-29 - Rotating electrical machines
- BS-EN-60034-30-1 - Rotating electrical machines
- BS-EN-60034-4 - Rotating electrical machines
- BS-EN-60034-5 - Rotating electrical machines
- BS-EN-60034-8 - Rotating electrical machines
- BS-EN-60034-9 - Rotating electrical machines
- BS-EN-61986 - Rotating electrical machines. Equivalent loading and super-position techniques. Indirect testing to determine temperature rise
- BS-EN-88528-11 - Reciprocating internal combustion engine driven alternating current generating sets
- BS-EN-IEC-60034-14 - Rotating electrical machines
- BS-EN-IEC-60034-14-TC - Tracked Changes. Rotating electrical machines
- BS-EN-IEC-60034-18-1 - Rotating electrical machines
- BS-EN-IEC-60034-18-32 - Rotating electrical machines
- BS-EN-IEC-60034-18-32-TC - Tracked Changes. Rotating electrical machines
- BS-EN-IEC-60034-23 - Rotating electrical machines
- BS-EN-IEC-60034-2-3 - Rotating electrical machines
- BS-EN-IEC-60034-27-1 - Rotating electrical machines
- BS-EN-IEC-60034-27-1-TC - Tracked Changes. Rotating electrical machines
- BS-EN-IEC-60034-27-4 - Rotating electrical machines
- BS-EN-IEC-60034-3 - Rotating electrical machines
- BS-EN-IEC-60034-33 - Rotating electrical machines
- BS-EN-IEC-60034-4-1 - Rotating electrical machines
- BS-EN-IEC-60034-5 - Rotating electrical machines
- BS-EN-IEC-60034-7-TC - Tracked Changes. Rotating electrical machines
- BS-EN-ISO-1680 - Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines
- BS-IEC-60027-4 - Letter symbols to be used in electric technology. Rotating electric machines
- BS-IEC-60034-1 - Rotating electrical machines. Rating and performance
- BS-IEC-60034-19 - Rotating electrical machines. Specific test methods for d.c. machines on conventional and rectifier-fed supplies
- BS-IEC-60034-4 - Rotating electrical machines. Methods for determining synchronous machine quantities from tests
- BS-IEC-60050(411) - International electrotechnical vocabulary
- DD-CLC-60034-18-42 - Rotating electrical machines
- DD-CLC-60034-24 - Rotating electrical machines
- PD-CLC-IEC-60034-30-2 - Rotating electrical machines
- PD-CLC-IEC-60034-32 - Rotating electrical machines
- PD-IEC-60034-2-3 - Rotating electrical machines
- PD-IEC-60034-27-5 - Rotating electrical machines
- PD-IEC-60034-30-2 - Rotating electrical machines
- PD-IEC-60034-32 - Rotating electrical machines
- PD-IEC-63021 - Rotating electrical machinery. Natural graphite brush for slip-ring in wound rotor-type induction motor. Application information
IEC:
- IEC-60034-1 - Rotating electrical machines - Part 1: Rating and performance
- IEC-60034-11 - Rotating electrical machines - Part 11: Thermal protection
- IEC-60034-12 - Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- IEC-60034-12-RL - Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- IEC-60034-14 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
- IEC-60034-14-RL - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
- IEC-60034-18-1 - Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines
- IEC-60034-18-1 CMV - Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines
- IEC-60034-18-22 - Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions
- IEC-60034-18-32 - Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings
- IEC-60034-18-32 CMV - Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings
- IEC-60034-18-41 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests
- IEC-60034-18-41-AM1 - Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests
- IEC-60034-18-42 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
- IEC-60034-18-42-AM1 - Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
- IEC-60034-1-RL - Rotating electrical machines - Part 1: Rating and performance
- IEC-60034-23 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation
- IEC-60034-2-3 - Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors
- IEC-60034-25 - Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
- IEC-60034-25 CMV - Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
- IEC-60034-27-1 - Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation
- IEC-60034-27-4 - Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines
- IEC-60034-27-5 - Rotating electrical machines - Part 27-5: Off-line measurement of partial discharge inception voltage on winding insulation under repetitive impulse voltage
- IEC-60034-28 - Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
- IEC-60034-3 - Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
- IEC-60034-30-2 - Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)
- IEC-60034-31 - Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guidelines
- IEC-60034-32 - Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings
- IEC-60034-33 - Rotating electrical machines - Part 33: Synchronous hydrogenerators including motor-generators - Specific requirements
- IEC-60034-34 - Rotating electrical machines - Part 34: AC adjustable speed rolling mill motors
- IEC-60034-4-1 - Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests
- IEC-60034-5 - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- IEC-60034-7 - Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
- IEC-60034-9 - Rotating electrical machines - Part 9: Noise limits
- IEC-60034-9-CMV - Rotating electrical machines - Part 9: Noise limits
- IEC-60034 SERIES - Rotating electrical machines - ALL PARTS
- IEC-60050-411-AM2 - Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery
- IEC-60072-1 - Rotating electrical machines - Dimensions and output series - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
- IEC-60276 - Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature
- IEC-61972 - Method for Determining Losses & Efficiency of Three-Phase Cage Induction Motors
- IEC-61986 - Rotating Electrical Machines - Equivalent Loading & Super-Position Techniques - Indirect T
- IEC-63021 - Rotating electrical machinery - Natural graphite brush for slip-ring in wound rotor-type induction motor - Application information
ISO:
Other SDOs:
- EN-60027-4 - Letter Symbols To Be Used in Electric Technology, Rotating Electric Machines
- EN-60034-15 - Part 15: Impulse Voltage Withstand Levels of form-Wound Stator Coils for Rotating a.C.
- EN-60034-18-1 - Part 18-1: Functional Evaluation of Insulation Systems - General Guidelines, Rotating
- EN-60034-18-42 - Rotating electrical machines. Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
- EN-60034-2-1 - Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
- EN-60034-2-2 - Part 2-2: Specific Methods for Determining Separate Losses of Large Machines From Test
- EN-60034-29 - Rotating Electrical Machines, Equivalent Loading & Superposition Techniques, Indirect
- EN-60034-4 - Rotating Electrical Machines, Methods for Determining Synchronous Machine Quantities F
- EN-60034-8 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation
- EN-61986 - Rotating Electrical Machines, Equivalent Loading & Super-Position Techniques, Indirect
- EN-IEC-60034-23 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation (IEC 60034-23:2019)
- EN-IEC-60034-27-1 - Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
- EN-IEC-60034-27-4 - Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines
- EN-ISO-1680 - Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
- IEC-60034-11-RL - Rotating electrical machines - Part 11: Thermal protection
- SS-EN-ISO-1680 - Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)