Document Center List of Standards on Fibres And Cables
ICS Code 33.180.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D4967 - Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing, and Strength Components in Fiber-Optic Cables
- ASTM-D6113 - Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
- ASTM-E1614 - Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems
- ASTM-E1654 - Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy
BSI:
- BS-6558-1 - Optical fibres and cables.
- BS-7718 - Code of Practice for Installation of Fibre Optic Cabling
- BS-EN-187000 - Generic specification for optical fibre cables
- BS-EN-187101 - Harmonized system of quality assessment for electronic components. Family specification: optical telecommunication cables to be used in ducts or direct buried application
- BS-EN-187103 - Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications
- BS-EN-187105 - Single mode optical cable (duct/direct buried installation)
- BS-EN-187200 - Harmonized System of Quality Assessment for Electronic Components. Sectional Specifica
- BS-EN-188000 - Generic specification for optical fibres
- BS-EN-188100 - Harmonized system of quality assessment for electronic components. Sectional specification: single-mode (SM) optical fibre
- BS-EN-188101 - Harmonized system of quality assessment for electronic components. Family specification: single-mode dispersion unshifted (B1.1) optical fibre
- BS-EN-188102 - Harmonized system of quality assessment for electronic components. Family specification: single-mode dispersion shifted (B2) optical fibre
- BS-EN-188200 - Harmonized system of quality assessment for electronic components. Sectional specification. Optical fibres A1 category graded index multimode
- BS-EN-188201 - Harmonized system of quality assessment for electronic components. Family specification: A1a graded index multimode optical fibres
- BS-EN-188202 - Harmonized system of quality assessment for electronic components. Family specification: A1b graded index multimode optical fibres
- BS-EN-50266-1 - Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables
- BS-EN-50266-2-1 - Procedures - Category a F/R
- BS-EN-50266-2-2 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
- BS-EN-50266-2-4 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
- BS-EN-50266-2-5 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
- BS-EN-50516-2-1 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications
- BS-EN-50551-2 - Simplex and duplex cables to be used for cords
- BS-EN-50582 - Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing
- BS-EN-60332-1-2 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60332-1-3 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60332-2-2 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60332-3-10 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60332-3-21 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60332-3-22 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60332-3-23 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60332-3-24 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60332-3-25 - Tests on electric and optical fibre cables under fire conditions
- BS-EN-60793-1-1 - Optical fibres
- BS-EN-60793-1-1-TC - Tracked Changes. Optical fibres
- BS-EN-60793-1-20 - Optical fibres
- BS-EN-60793-1-21 - Optical fibres. Measurement methods and test procedures
- BS-EN-60793-1-22 - Optical fibres. Measurement methods and test procedures
- BS-EN-60793-1-30 - Optical fibres
- BS-EN-60793-1-31 - Optical fibres
- BS-EN-60793-1-32 - Optical fibres
- BS-EN-60793-1-33 - Optical fibres
- BS-EN-60793-1-33-TC - Tracked Changes. Optical fibres
- BS-EN-60793-1-34 - Optical fibres
- BS-EN-60793-1-40 - Optical fibres
- BS-EN-60793-1-41 - Optical fibres
- BS-EN-60793-1-42 - Optical fibres
- BS-EN-60793-1-43 - Optical fibres
- BS-EN-60793-1-43-TC - Tracked Changes. Optical fibres
- BS-EN-60793-1-44 - Optical fibres
- BS-EN-60793-1-46 - Optical fibres. Measurement methods and test procedures
- BS-EN-60793-1-47 - Optical fibres. Measurement methods and test procedures. Macrobending loss
- BS-EN-60793-1-48 - Optical fibres
- BS-EN-60793-1-48-TC - Tracked Changes. Optical fibres
- BS-EN-60793-1-49 - Optical fibres
- BS-EN-60793-1-50 - Optical fibres
- BS-EN-60793-1-50-TC - Tracked Changes. Optical fibres
- BS-EN-60793-1-51 - Optical fibres
- BS-EN-60793-1-52 - Optical fibres
- BS-EN-60793-1-53 - Optical fibres
- BS-EN-60793-1-54 - Optical fibres
- BS-EN-60793-1-60 - Optical fibres
- BS-EN-60793-1-61 - Optical fibres
- BS-EN-60793-2 - Optical fibres
- BS-EN-60793-2-10 - Optical fibres
- BS-EN-60793-2-20 - Optical fibres
- BS-EN-60793-2-20-TC - Tracked Changes. Optical fibres
- BS-EN-60793-2-30 - Optical fibres
- BS-EN-60793-2-30-TC - Tracked Changes. Optical fibres
- BS-EN-60793-2-40 - Optical fibres
- BS-EN-60793-2-50 - Optical fibres
- BS-EN-60793-2-60 - Optical fibres
- BS-EN-60793-2-70 - Optical fibres
- BS-EN-60794-1-1 - Optical fibre cables
- BS-EN-60794-1-2 - Optical fibre cables
- BS-EN-60794-1-20 - Optical fibre cables
- BS-EN-60794-1-21 - Optical fibre cables
- BS-EN-60794-1-21-TC - Tracked Changes. Optical fibre cables
- BS-EN-60794-1-22 - Optical fibre cables. Generic specification. Basic optical cable test procedures. Environmental test methods
- BS-EN-60794-1-23 - Optical fibre cables
- BS-EN-60794-1-24 - Optical fibre cables
- BS-EN-60794-1-3 - Optical fibre cables
- BS-EN-60794-2 - Optical fibre cables
- BS-EN-60794-2-10 - Optical fibre cables
- BS-EN-60794-2-11 - Optical fibre cables
- BS-EN-60794-2-21 - Optical fibre cables
- BS-EN-60794-2-22 - Optical fibre cables
- BS-EN-60794-2-30 - Optical fibre cables
- BS-EN-60794-2-31 - Optical fibre cables
- BS-EN-60794-2-40 - Optical fibre cables
- BS-EN-60794-2-41 - Optical fibre cables
- BS-EN-60794-2-42 - Optical fibre cables
- BS-EN-60794-2-50 - Optical fibre cables
- BS-EN-60794-2-51 - Optical fibre cables
- BS-EN-60794-2-TC - Tracked Changes. Optical fibre cables
- BS-EN-60794-3 - Optical fibre cables
- BS-EN-60794-3-10 - Optical fibre cables
- BS-EN-60794-3-12 - Optical fibre cables
- BS-EN-60794-3-20 - Optical fibre cables
- BS-EN-60794-3-20-TC - Tracked Changes. Optical fibre cables
- BS-EN-60794-3-21 - Optical fibre cables
- BS-EN-60794-3-21-TC - Tracked Changes. Optical fibre cables
- BS-EN-60794-3-30 - Optical fibres
- BS-EN-60794-3-40 - Optical fibre cables
- BS-EN-60794-3-50 - Optical fibre cables
- BS-EN-60794-3-60 - Optical fibre cables
- BS-EN-60794-3-70 - Optical fibre cables
- BS-EN-60794-3-TC - Tracked Changes. Optical fibre cables
- BS-EN-60794-4-10 - Optical fibre cables
- BS-EN-60794-4-20 - Optical fibre cables
- BS-EN-60794-5 - Optical fibre cables
- BS-EN-60794-5-10 - Optical fibre cables
- BS-EN-60794-5-20 - Optical fibre cables
- BS-EN-60794-5-TC - Tracked Changes. Optical fibre cables
- BS-EN-61280-2-11 - Fibre optic communication subsystem test procedures. Digital systems
- BS-EN-61280-2-12 - Fibre optic communication subsystem test procedures
- BS-EN-61300-3-38 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
- BS-EN-61314-1-1 - Fibre optic interconnecting devices and passive components. Fibre optic fan-outs
- BS-EN-61315 - Calibration of fibre-optic power meters
- BS-EN-61753-031-3 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-61753-031-6 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-61753-061-2 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-61753-081-2 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-61753-085-02 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-61753-086-2 - Fibre optic interconnecting devices and passive components performance standard
- BS-EN-61918 - Industrial communication networks. Installation of communication networks in industrial premises
- BS-EN-62271-100 - High-voltage switchgear and controlgear
- BS-EN-62343-2 - Dynamic modules
- BS-EN-IEC-60793-1-1 - Optical fibres
- BS-EN-IEC-60793-1-31 - Optical fibres
- BS-EN-IEC-60793-1-32 - Optical fibres
- BS-EN-IEC-60793-1-40 - Optical fibres
- BS-EN-IEC-60793-1-45 - Optical fibres
- BS-EN-IEC-60793-1-45-TC - Tracked Changes. Optical fibres
- BS-EN-IEC-60793-1-47 - Optical fibres
- BS-EN-IEC-60793-1-47-TC - Tracked Changes. Optical fibres
- BS-EN-IEC-60793-1-49 - Optical fibres
- BS-EN-IEC-60793-1-49-TC - Tracked Changes. Optical fibres
- BS-EN-IEC-60793-1-54 - Optical fibres
- BS-EN-IEC-60793-1-54-TC - Tracked Changes. Optical fibres
- BS-EN-IEC-60793-2 - Optical fibres
- BS-EN-IEC-60793-2-10 - Optical fibres
- BS-EN-IEC-60793-2-40 - Optical fibres
- BS-EN-IEC-60793-2-50 - Optical fibres
- BS-EN-IEC-60794-1-2 - Optical fibre cables
- BS-EN-IEC-60794-1-211 - Optical fibre cables
- BS-EN-IEC-60794-1-215 - Optical fibre cables
- BS-EN-IEC-60794-1-22 - Optical fibre cables
- BS-EN-IEC-60794-1-220 - Optical fibre cables
- BS-EN-IEC-60794-1-22-TC - Tracked Changes. Optical fibre cables
- BS-EN-IEC-60794-1-23 - Optical fibre cables
- BS-EN-IEC-60794-1-305 - Optical fibre cables
- BS-EN-IEC-60794-1-31 - Optical fibre cables
- BS-EN-IEC-60794-1-310 - Optical fibre cables
- BS-EN-IEC-60794-1-401 - Optical fibre cables
- BS-EN-IEC-60794-1-402 - Optical fibre cables
- BS-EN-IEC-60794-1-402-TC - Tracked Changes. Optical fibre cables
- BS-EN-IEC-60794-1-404 - Optical fibre cables
- BS-EN-IEC-60794-2-11 - Optical fibre cables
- BS-EN-IEC-60794-2-21 - Optical fibre cables
- BS-EN-IEC-60794-2-31 - Optical fibre cables
- BS-EN-IEC-60794-2-50 - Optical fibre cables
- BS-EN-IEC-60794-3 - Optical fibre cables
- BS-EN-IEC-60794-3-12 - Optical fibre cables
- BS-EN-IEC-60794-3-40 - Optical fibre cables
- BS-EN-IEC-60794-4 - Optical fibre cables
- BS-EN-IEC-60794-4-20 - Optical fibre cables
- BS-EN-IEC-60794-4-20-TC - Tracked Changes. Optical fibre cables
- BS-EN-IEC-60794-4-TC - Tracked Changes. Optical fibre cables
- BS-EN-IEC-60794-6 - Optical fibre cables
- BS-EN-IEC-60794-6-10 - Optical fibre cables
- BS-EN-IEC-60794-6-20 - Optical fibre cables
- BS-EN-IEC-60794-6-30 - Optical fibre cables
- BS-EN-IEC-61280-2-8 - Fibre optic communication subsystem test procedures
- BS-EN-IEC-61315 - Calibration of fibre-optic power meters
- BS-EN-IEC-61753-061-2 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-IEC-61753-085-02 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-IEC-61918 - Industrial communication networks. Installation of communication networks in industrial premises
- BS-IEC-60793-2 - Optical fibres. Product specifications
- BS-IEC-60794-2-22 - Optical fibre cables. - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors
- BS-IEC-61753-085-02 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-ISO/IEC-14763-3 - Information technology. Implementation and operation of customer premises cabling
- DD-CLC-50433 - Guidelines for paving the way for broadband Broadband, 25 Mbit/s and more for All
- PD-IEC-61292-12 - Optical amplifiers
- PD-IEC-61941 - Optical fibres. Polarization mode dispersion measurement techniques for single-mode optical fibres
- PD-IEC-62000 - Guidelines for combining different single-mode fibre sub-categories
- PD-IEC-62033 - Attenuation uniformity in optical fibres
- PD-IEC-62048 - Optical fibres. Reliability. Power law theory
- PD-IEC-62221 - Optical fibres. Measurement methods. Microbending sensitivity
- PD-IEC-62245 - Optical fibres. Measurement methods. Bend loss for A3 and A4 type fibres
- PD-IEC-62283 - Optical fibres. Guidance for nuclear radiation tests
- PD-IEC-62284 - Effective area measurements of single-mode optical fibres. Guidance
- PD-IEC-62285 - Application guide for non-linear coefficient measuring methods
- PD-IEC-62316 - Guidance for the interpretation of OTDR backscattering traces for single-mode fibres
- PD-IEC-62349 - Guidance of measurement methods and test procedures. Basic tests for polarization-maintaining optical fibres
- PD-IEC-62469 - Guidance for residual stress measurement of optical fibre
- PD-IEC-62470 - Guidance on techniques for the measurement of the coefficient of friction (COF) between cables and ducts
- PD-IEC-62547 - Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results
- PD-IEC-62627-02 - Fibre optic interconnecting devices and passive components
- PD-IEC-62690 - Hydrogen effects in optical fibre cables. Guidelines
- PD-IEC-62691 - Optical fibre cables. Guidelines to the installation of optical fibre cables
- PD-IEC-62901 - Guidance for the selection of drop cables
- PD-IEC-62959 - Optical fibre cables. Shrinkage effects on cable and cable element end termination. Guidance
- PD-IEC-63194 - Guidance on colour coding of optical fibre cables
- PD-IEC-63367 - Fibre optic interconnecting devices and passive components. Summarising results of round robin on connector end face scratch recognition and verification by automated microscopes
- PD-ISO/IEC-14763-2-1 - Information technology. Implementation and operation of customer premises cabling
IEC:
- IEC-60331-25 - Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables
- IEC-60793-1-1 - Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
- IEC-60793-1-1-RL - Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
- IEC-60793-1-20 - Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
- IEC-60793-1-21 - Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry
- IEC-60793-1-22 - Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement
- IEC-60793-1-30 - Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test
- IEC-60793-1-31 - Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength
- IEC-60793-1-32 - Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
- IEC-60793-1-32-RL - Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
- IEC-60793-1-33 - Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
- IEC-60793-1-34 - Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl
- IEC-60793-1-34-RL - Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl
- IEC-60793-1-40 - Optical fibres - Part 1-40: Attenuation measurement methods
- IEC-60793-1-41 - Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
- IEC-60793-1-42 - Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion
- IEC-60793-1-43 - Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
- IEC-60793-1-44 - Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
- IEC-60793-1-45 - Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
- IEC-60793-1-45-RL - Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
- IEC-60793-1-46 - Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
- IEC-60793-1-47 - Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
- IEC-60793-1-48 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion
- IEC-60793-1-49 - Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
- IEC-60793-1-50 - Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
- IEC-60793-1-51 - Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
- IEC-60793-1-52 - Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests
- IEC-60793-1-53 - Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests
- IEC-60793-1-54 - Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
- IEC-60793-1-54-RL - Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
- IEC-60793-1-60 - Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length
- IEC-60793-1-61 - Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk
- IEC-60793-2 - Optical fibres - Part 2: Product specifications - General
- IEC-60793-2-10 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
- IEC-60793-2-10-AM1 - Amendment 1 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
- IEC-60793-2-20 - Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres
- IEC-60793-2-30 - Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
- IEC-60793-2-40 - Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres
- IEC-60793-2-40-RL - Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres
- IEC-60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
- IEC-60793-2-50-RL - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
- IEC-60793-2-60 - Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres
- IEC-60793-2-70 - Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres
- IEC-60793-2-RL - Optical fibres - Part 2: Product specifications - General
- IEC-60794-1-1 - Optical fibre cables - Part 1-1: Generic specification - General
- IEC-60794-1-1-RL - Optical fibre cables - Part 1-1: Generic specification - General
- IEC-60794-1-2 - Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance
- IEC-60794-1-20 - Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions
- IEC-60794-1-21 - Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods
- IEC-60794-1-2-1 - Amendment 1 - Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General
- IEC-60794-1-211 - Optical fibre cables - Part 1-211: Generic specification - Basic optical cable test procedures - Environmental test methods - Sheath shrinkage, method F11
- IEC-60794-1-215 - Optical fibre cables . Part 1-215: Generic specification . Basic optical cable test procedures . Environmental test methods . Cable external freezing test, Method F15
- IEC-60794-1-219 - Optical fibre cables - Part 1-219: Generic specification - Basic optical cable test procedures - Material compatibility test, method F19
- IEC-60794-1-21-AM1 - Amendment 1 - Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods
- IEC-60794-1-22 - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
- IEC-60794-1-220 -
Optical fibre cables - Part 1-220: Generic specification - Basic optical cable test procedures - Environmental test methods - Salt spray corrosion test, method F20
- IEC-60794-1-22-RL - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
- IEC-60794-1-23 - Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
- IEC-60794-1-23-RL - Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
- IEC-60794-1-24 - Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods
- IEC-60794-1-2-RL - Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance
- IEC-60794-1-3 - Optical fibre cables - Part 1-3: Generic specification - Optical cable elements
- IEC-60794-1-305 - Optical fibre cables - Part 1-305: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon tear (separability), Method G5
- IEC-60794-1-308 - Optical fibre cables - Part 1-308: Generic specification - Basic optical cable test procedures - Cable element test methods . Ribbon residual twist test, method G8
- IEC-60794-1-31 - Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
- IEC-60794-1-310 -
Optical fibre cables - Part 1-310: Generic specification - Basic optical cable test procedures - Cable element test methods - Strippability, method G10
- IEC-60794-1-31-RL - Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
- IEC-60794-1-401 - Optical fibre cables - Part 1-401: Generic specification - Basic optical cable test procedures - Electrical test methods - Short-circuit test (for OPGW, OPPC and OPAC), Method H1
- IEC-60794-1-402 - Optical fibre cables - Part 1-402: Generic specification - Basic optical cable test procedures - Electrical test methods - Lightning test (for OPGW, OPPC and OPAC), Method H2
- IEC-60794-1-403 - Optical fibre cables - Part 1-403: Generic specification - Basic optical cable test procedures - Electrical test methods - Electrical continuity test of cable metallic elements, method H3
- IEC-60794-1-404 -
Optical fibre cables - Part 1-404: Generic specification - Basic optical cable test procedures - Electrical test methods - Current-temperature test, method H4
- IEC-60794-2 - Optical fibre cables - Part 2: Indoor cables - Sectional specification
- IEC-60794-2-10 - Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables
- IEC-60794-2-10-RL - Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables
- IEC-60794-2-11 - Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
- IEC-60794-2-11-AM1 - Amendment 1 - Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
- IEC-60794-2-11-RL - Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
- IEC-60794-2-21 - Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
- IEC-60794-2-21-AM1 - Amendment 1 - Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
- IEC-60794-2-21-RL - Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
- IEC-60794-2-22 - Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors
- IEC-60794-2-30 - Optical fibre cables - Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies
- IEC-60794-2-30-RL - Optical fibre cables - Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies
- IEC-60794-2-31 - Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
- IEC-60794-2-31-AM1 - Amendment 1 - Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
- IEC-60794-2-31-RL - Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
- IEC-60794-2-40 - Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables
- IEC-60794-2-41 - Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres
- IEC-60794-2-42 - Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres
- IEC-60794-2-50 - Optical fibre cables - Part 2-50: Indoor optical fibre cables - Family specification for simplex and duplex cables for use in terminated cable assemblies
- IEC-60794-2-51 - Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment
- IEC-60794-3 - Optical fibre cables - Part 3: Outdoor cables - Sectional specification
- IEC-60794-3-10 - Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables
- IEC-60794-3-11 - Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables
- IEC-60794-3-12 - Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
- IEC-60794-3-12-RL - Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
- IEC-60794-3-20 - Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables
- IEC-60794-3-21 - Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling
- IEC-60794-3-30 - Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application
- IEC-60794-3-40 - Optical fibre cables - Part 3-40: Outdoor cables - Family specification for cables for storm and sanitary sewers
- IEC-60794-3-50 - Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes
- IEC-60794-3-60 - Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes
- IEC-60794-3-70 - Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
- IEC-60794-3-70-RL - Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
- IEC-60794-3-RL - Optical fibre cables - Part 3: Outdoor cables - Sectional specification
- IEC-60794-4 - Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines
- IEC-60794-4-1 - Optical Fibre Cables - Part 4-1: Aerial Optical Cables for High-Voltage Power Lines
- IEC-60794-4-10 - Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines
- IEC-60794-4-20 - Optical fibre cables - Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family specification for ADSS (all dielectric self-supported) optical cables
- IEC-60794-4-20-RL - Optical fibre cables - Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family specification for ADSS (all dielectric self-supported) optical cables
- IEC-60794-4-30 - Optical fibre cables - Part 4-30: Aerial optical cables along electrical power lines - Family specification for optical phase conductor (OPPC) optical cables
- IEC-60794-4-RL - Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines
- IEC-60794-5 - Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing
- IEC-60794-5-10 - Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
- IEC-60794-5-20 - Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
- IEC-60794-6 - Optical fibre cables - Part 6: Indoor-outdoor cables - Sectional specification for indoor-outdoor cables
- IEC-60794-6-10 - Optical fibre cables - Part 6-10: Indoor-outdoor cables - Family specification for universal indoor-outdoor cables
- IEC-60794-6-20 - Optical fibre cables - Part 6-20: Indoor-outdoor cables - Family specification for flame retardant outdoor cables
- IEC-60794-6-30 - Optical fibre cables - Part 6-30: Indoor-outdoor cables - Family specification for weatherised indoor cables
- IEC-60869-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
- IEC-61280-2-11 - Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
- IEC-61280-2-12 - Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment
- IEC-61280-2-8 - Fibre optic communication subsystem test procedures - Part 2-8: Digital systems - Determination of low BER using Q-factor measurements
- IEC-61292-12 - Optical amplifiers - Part 12: Optical fibre amplifiers for space division multiplexing transmission
- IEC-61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
- IEC-61300-3-38 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38: Examinations and measurements - Group delay, chromatic dispersion and phase ripple
- IEC-61300-3-54 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-54: Examinations and measurements - Angular misalignment between ferrule bore axis and ferrule axis for cylindrical ferrules
- IEC-61314-1-1 - Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification
- IEC-61315 - Calibration of fibre-optic power meters
- IEC-61753-031-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment
- IEC-61753-031-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category O - Uncontrolled environment
- IEC-61753-061-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C - Controlled environments
- IEC-61753-061-2-RL - Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C - Controlled environments
- IEC-61753-081-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments
- IEC-61753-082-2 - Fibre optic interconnecting devices and passive components performance standard - Part 082-2: Pigtailed single-mode fibre optic 1,31/1,55 °m WWDM devices for category C - Controlled environment
- IEC-61753-085-02 - Fibre optic interconnecting devices and passive components - Performance standard - Part 085-02: Non-connectorized single-mode pigtailed CWDM devices for category C - Indoor controlled environment
- IEC-61753-085-2 - Fibre optic interconnecting devices and passive components performance standard - Part 085-2: Non-connectorized single-mode pigtailed CWDM devices for category C - Controlled environment
- IEC-61753-086-2 - Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorized single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment
- IEC-62000 - Guidelines for combining different single-mode fibre sub-categories
- IEC-62000-RL - Guidelines for combining different single-mode fibre sub-categories
- IEC-62005-9-2 - Reliability of fibre optic interconnecting devices and passive optical components - Part 9-2: Reliability qualification for single fibre optic connector sets - Single mode
- IEC-62033 - Attenuation uniformity in optical fibres
- IEC-62048 - Optical fibres - Reliability - Power law theory
- IEC-62221 - Optical fibres - Measurement methods - Microbending sensitivity
- IEC-62283 - Optical fibres - Guidance for nuclear radiation tests
- IEC-62284 - Effective area measurements of single-mode optical fibres - Guidance
- IEC-62285 - Application guide for non-linear coefficient measuring methods
- IEC-62316 - Guidance for the interpretation of OTDR backscattering traces for single-mode fibres
- IEC-62324 - Single-mode optical fibres - Raman gain efficiency measurement using continuous wave method - Guidance
- IEC-62349 - Guidance of measurement methods and test procedures - Basic tests for polarization-maintaining optical fibres
- IEC-62362 - Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics - Guidance
- IEC-62362-RL - Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics - Guidance
- IEC-62469 - Guidance for residual stress measurement of optical fibre
- IEC-62470 - Guidance on techniques for the measurement of the coefficient of friction (COF) between cables and ducts
- IEC-62547 - Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results
- IEC-62627-02 - Fibre optic interconnecting devices and passive components - Part 02: Report of round robin test results on SC plug style fixed attenuators
- IEC-62690 - Hydrogen effects in optical fibre cables - Guidelines
- IEC-62691 - Optical fibre cables - Guidelines to the installation of optical fibre cables
- IEC-62901 - Guide for the selection of drop cables
- IEC-62959 - Optical fibre cables - Shrinkage effects on cable and cable element end termination - Guidance
- IEC-63194 - Guidance on colour coding of optical fibre cables
- IEC-63367 - Fibre optic interconnecting devices and passive components - Summarising results of round robin on connector end face scratch recognition and verification by automated microscopes
- IEC/PAS-60794-2-11 - Part 2-11: Indoor Optical Fibre Cables - Detailed Specification for Simplex & Duplex Cable
- IEC/PAS-60794-2-21 - Part 2-21: Indoor Optical Fibre Cables - Detailed Specification for Multi-Fibre Optical Di
- IEC/PAS-60794-2-31 - Part 2-31: Indoor Optical Fibre Cables - Detailed Specification for Optical Fibre Ribbon C
- IEC/PAS-60794-2-50 - Part 2-50: Indoor Optical Fibre Cables - Family Specification for Simplex & Duplex Cables
- IEC/PAS-60794-3-12 - Part 3-12: Outdoor Cables - Detailed Specification for Duct& Directly Buried Optical Tel
- IEC/PAS-60794-3-21 - Part 3-21: Outdoor Cables - Detailed Specification for Optical Self-Supporting Aerial Tele
ISO:
Other SDOs:
- DS-EN-60793-1-54 - Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
- EN-50551-1 - Simplex and duplex cables to be used for cords - Part 1: Blank Detail Specification and minimum requirements
- EN-50551-2 - Simplex and duplex cables to be used for cords - Part 2: Detailed specification and minimum requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords category U
- EN-50582 - Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing
- EN-60332-1-3 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
- EN-60332-3-10 - Part 3-10: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
- EN-60332-3-21 - Part 3-21: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
- EN-60332-3-23 - Part 3-23: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
- EN-60332-3-24 - Part 3-24: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
- EN-60332-3-25 - Part 3-25: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
- EN-60793-1-1 - Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
- EN-60793-1-20 - Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
- EN-60793-1-30 - Optical Fibres, Measurement Methods & Test Procedures, Fibre Proof Test
- EN-60793-1-32 - Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
- EN-60793-1-33 - Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
- EN-60793-1-34 - Optical Fibres, Measurement Methods & Test Procedures, Fibre Curl
- EN-60793-1-41 - Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
- EN-60793-1-42 - Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion
- EN-60793-1-43 - Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
- EN-60793-1-44 - Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
- EN-60793-1-47 - Optical Fibres, Measurement Methods & Test Procedures, Macrobending Loss
- EN-60793-1-48 - Optical Fibres, Measurement Methods & Test Procedures, Polarization Mode Dispersion
- EN-60793-1-49 - Part 1-49: Measurement Methods & Test Procedures - Differential Mode
- EN-60793-1-50 - Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests
- EN-60793-1-51 - Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
- EN-60793-1-52 - Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests
- EN-60793-1-53 - Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests
- EN-60793-1-54 - Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
- EN-60793-1-60 - Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length
- EN-60793-1-61 - Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk
- EN-60793-2 - Optical fibres - Part 2: Product specifications - General
- EN-60793-2-10 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
- EN-60793-2-20 - Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres
- EN-60793-2-30 - Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
- EN-60793-2-40 - Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres
- EN-60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
- EN-60793-2-60 - Optical Fibres, Product Specifications, Sectional Specification for Category C Single-
- EN-60793-2-70 - Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres
- EN-60794-1-1 - Optical fibre cables - Part 1-1: Generic specification - General
- EN-60794-1-2 - Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance
- EN-60794-1-20 - Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions
- EN-60794-1-21 - Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods
- EN-60794-1-22 - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
- EN-60794-1-23 - Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
- EN-60794-1-24 - Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods
- EN-60794-1-3 - Optical fibre cables - Part 1-3: Generic specification - optical cable elements
- EN-60794-2 - Optical fibre cables. Indoor cables. Sectional specification
- EN-60794-2-10 - Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables
- EN-60794-2-11 - Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling
- EN-60794-2-21 - Optical fibre cables - Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
- EN-60794-2-22 - Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors
- EN-60794-2-30 - Optical Fibre Cables, Indoor Cables, Family Specification for Ribbon Cables
- EN-60794-2-31 - Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
- EN-60794-2-40 - Optical Fibre Cables, Indoor Optical Fibre Cables, Family Specification for a4 Fibre C
- EN-60794-2-41 - Optical Fibre Cables, Indoor Cables, Product Specification for Simplex & Duplex Buffer
- EN-60794-2-42 - Optical Fibre Cables, Indoor Optical Fibre Cables, Product Specification for Simplex &
- EN-60794-2-50 - Optical Fibre Cables, Indoor Cables, Family Specification for Simplex & Duplex Cables
- EN-60794-2-51 - Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment
- EN-60794-3 - Optical fibre cables - Part 3: Sectional specification - Outdoor cables
- EN-60794-3-10 - Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables
- EN-60794-3-12 - Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
- EN-60794-3-20 - Optical Fibre Cables, Outdoor Cables, Family Specification for Self-Supporting Aerial
- EN-60794-3-21 - Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling
- EN-60794-3-30 - Optical Fibres, Outdoor Cables, Family Specification for Optical Telecommunication Cab
- EN-60794-3-40 - Optical Fibre Cables, Outdoor Cables, Family Specification for Sewer Cables & Conduits
- EN-60794-3-50 - Optical Fibre Cables, Outdoor Cables, Family Specification for Gas Pipe Cables & Subdu
- EN-60794-3-60 - Optical Fibre Cables, Outdoor Cables, Family Specification for Drinking Water Pipe Cab
- EN-60794-3-70 - Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
- EN-60794-4-10 - Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines
- EN-60794-4-20 - Optical fibre cables - Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All Dielectric Self Supported) optical cables
- EN-60794-5 - Optical Fibre Cables, Sectional Specification, Microduct Cabling for Installation by B
- EN-60794-5-10 - Optical fibre cables - Part 5GÇô10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
- EN-60794-5-20 - Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
- EN-60974-2 - Optical fibre cables - Part 2: Indoor cables - Sectional specification
- EN-61280-2-12 - Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment
- EN-61300-3-38 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple
- EN-61753-031-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1+ùN and 2+ùN non-wavelength-selective branching devices for Category U - Uncontrolled environment
- EN-61753-031-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelengthselective branching devices for Category O - Uncontrolled environment
- EN-61753-061-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Non-connectorized single-mode fibre optic pigtailed isolators for category C - Controlled environment
- EN-61753-086-2 - Part 086-2: Non-Connectorized Single-Mode Bidirectional 1490/1550 Nm Downstream 1310 N
- EN-61918 - Industrial communication networks - Installation of communication networks in industrial premises
- EN-IEC-60793-1-31 - Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength (IEC 60793-1-31:2019)
- EN-IEC-60793-1-40 - Optical fibres - Part 1-40: Attenuation measurement methods (IEC 60793-1-40:2019)
- EN-IEC-60793-1-45 - Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
- EN-IEC-60793-1-47 - Optical fibres. Measurement methods and test procedures. Macrobending loss
- EN-IEC-60793-1-54 - Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
- EN-IEC-60793-2-10 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres (IEC 60793-2-10:2019)
- EN-IEC-60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2018)
- EN-IEC-60794-1-22 - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
- EN-IEC-60794-1-31 - Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
- EN-IEC-60794-2-11 - Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling (IEC 60794-2-11:2019)
- EN-IEC-60794-2-21 - Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling (IEC 60794-2-21:2019)
- EN-IEC-60794-2-30 - Optical fibre cables - Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies (IEC 60794-2-30:2019)
- EN-IEC-60794-2-31 - Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling (IEC 60794-2-31:2019)
- EN-IEC-60794-4 - Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines
- JIS-C-6839 - Indoor optical fiber ribbon cables
- UNE-EN-60794-1-1 - Optical fibre cables - Part 1-1: Generic specification - General