Document Center

Document Center List of Standards on Fibre Optic Interconnecting Devices

ICS Code 33.180.20

Return to ICS Index.

Up to Level 2:

• 33.180 (Fibre optic communications)

The following documents are a part of this series:

ASTM:

• ASTM-F2071 - Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic

BSI:

• BS-9230 - Specification for connectors of assessed quality for optical fibres and cables: generic data and methods of test
• BS-EN-12496 - Galvanic anodes for cathodic protection in seawater and saline mud
• BS-EN-180000 - Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators
• BS-EN-186000-1 - Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables. Requirements, test methods and qualification approval procedures
• BS-EN-186001 - Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables. Environmental category I
• BS-EN-186002 - Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category II
• BS-EN-186003 - Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category III
• BS-EN-186004 - Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category IV
• BS-EN-186005 - Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Connector for optical fibres and cables. Environmental category V
• BS-EN-186006-1 - Harmonized system of quality assessment for electronic components. Blank detail specification. Connectors for optical fibres and cables for military use. Environmental category VI
• BS-EN-186110 - Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type FC
• BS-EN-186150 - Connector Sets for Optical Fibres & Cables, Type OCCA-Bu
• BS-EN-186160 - Connector Sets for Optical Fibres & Cables, Type OCCA-Pc
• BS-EN-186170 - Harmonized System of Quality Assessment for Electronic Components, Sectional Specifica
• BS-EN-186240 - Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MT
• BS-EN-186310 - Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MF
• BS-EN-50377-10-1 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C
• BS-EN-50377-10-2 - Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. MU/APC singlemode terminated on IEC 60793-2 category B1 fibre
• BS-EN-50377-11-1 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-14-1 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-16-1 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-17-2 - Connector sets and Interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-18-1 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-2-1 - Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-2-2 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-3-1 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-4-3 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-6-2 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-10 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-11 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-12 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-13 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-2 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-3 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-4 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-5 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-6 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-7 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-8 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50377-8-9 - Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications
• BS-EN-50378-3-1 - Passive components to be used in optical fibre communication systems. Product specifications. Type 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
• BS-EN-50378-3-2 - Passive components to be used in optical fibre communication systems. Product specifications. Type 4/8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre
• BS-EN-50411-2 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-2-10 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-2-2 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-2-3 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-2-5 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-2-8 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-2-9 - Fibre organisers and closures to be used in optical fibre communications systems. Product specifications
• BS-EN-50411-3-1 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-3-3 - Fibre management systems and protective housings to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-3-4 - Fibre management systems and protective housings to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-3-5 - Fibre organisers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-3-6 - Fibre management systems and protective housings to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-3-8 - Fibre organizers and closures to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-4-1 - Fibre management systems and protective housings to be used in optical fibre communication systems. Product specifications
• BS-EN-50411-6-1-TC - Tracked Changes. Fibre management systems and protective housings to be used in optical fibre communication systems. Product specifications
• BS-EN-50516-1-1 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications
• BS-EN-50516-2-1 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications
• BS-EN-50516-3-1 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications
• BS-EN-60869-1 - Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices
• BS-EN-60874-1 - Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables
• BS-EN-60874-1-1 - Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables
• BS-EN-60875-1 - Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices
• BS-EN-60876-1 - Fibre optic interconnecting devices and passive components. Fibre optic spatial switches
• BS-EN-61073-1 - Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cables
• BS-EN-61202-1 - Fibre optic interconnecting devices and passive components. Fibre optic isolators
• BS-EN-61274-1 - Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors
• BS-EN-61274-1-1 - Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors
• BS-EN-61291-1 - Optical amplifiers
• BS-EN-61300-1 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-1-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-1 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-10 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-11 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-12 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-13 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Acceleration
• BS-EN-61300-2-14 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-15 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-16 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-17 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-18 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-19 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-2 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-20 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• BS-EN-61300-2-21 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-22 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-23 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-24 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-25 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• BS-EN-61300-2-26 - Fibre optic interconnecting devices and passive Components. Basic test and measurement procedures
• BS-EN-61300-2-27 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests
• BS-EN-61300-2-28 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-29 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Tests. Low air pressure
• BS-EN-61300-2-30 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Solar radiation
• BS-EN-61300-2-31 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• BS-EN-61300-2-32 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Water vapour permeation
• BS-EN-61300-2-33 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-34 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-35 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-36 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flammability (fire hazard)
• BS-EN-61300-2-37 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-38 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-4 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests
• BS-EN-61300-2-40 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests
• BS-EN-61300-2-42 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-43 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-44 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-45 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests
• BS-EN-61300-2-46 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-47 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-47-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-48 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-49 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-5 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-50 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-51 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-52 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-55 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-6 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-7 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-2-8 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Bump
• BS-EN-61300-2-9 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-1 - Fire optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-10 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-11 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Engagement and separation forces
• BS-EN-61300-3-13 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Control stability of a fibre optic switch
• BS-EN-61300-3-14 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-15 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-16 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-17 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-18 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-2 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-20 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-21 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-23 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-24 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-25 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-26 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-27 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-28 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-29 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-3 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-30 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-31 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-32 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-33 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-34 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-35 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-36 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-37 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-39 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-4 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-42 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-43 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-45 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-46 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-47 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-49 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-5 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• BS-EN-61300-3-50 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-51 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-52 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-53 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-6 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-7 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-3-8 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Ambient light susceptibility
• BS-EN-61300-5 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61300-6 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-61313-1 - Fibre optic passive components and cable assemblies. Capability approval. Generic specification
• BS-EN-61314-1 - Fibre optic interconnecting devices and passive components. Fibre optic fan-outs
• BS-EN-61753-021-2 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-021-3 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-021-6 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-022-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-031-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-041-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-042-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-051-3 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-052-3 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-052-6 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-053-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-053-3 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-057-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-058-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-059-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-062-6 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-071-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-083-2 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-084-2 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-087-6 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-088-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-089-02 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-089-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-091-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-092-6 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-1 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-101-2 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-101-3 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-1-1 - Fibre optic interconnecting devices and passive components performance standard. General and guidance
• BS-EN-61753-111-7 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-111-8 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-111-9 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-61753-121-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-121-3 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-1-3 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-141-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-143-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-2-1 - Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category U
• BS-EN-61753-2-3 - Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category U
• BS-EN-61753-381-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-381-6 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61753-382-2 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-61754-1 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-10 - Fibre optic connector interfaces
• BS-EN-61754-12 - Fibre optic connector interfaces
• BS-EN-61754-13 - Fibre optic connector interfaces
• BS-EN-61754-15 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-16 - Fibre optic connector interfaces
• BS-EN-61754-18 - Fibre optic connector interfaces
• BS-EN-61754-19 - Fibre optic connector interfaces
• BS-EN-61754-20 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-20-100 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-21 - Fibre optic connector interfaces
• BS-EN-61754-22 - Fibre optic connector interfaces
• BS-EN-61754-23 - Fibre optic connector interfaces
• BS-EN-61754-24 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-24-11 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-24-21 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-25 - Fibre optic connector interfaces
• BS-EN-61754-26 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-27 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-28 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-29 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-3 - Fibre optic connector interfaces
• BS-EN-61754-30 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-31 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-32 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-34 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-4 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-4-1 - Fibre optic connector interfaces. Type SC connector family
• BS-EN-61754-4-100 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-5 - Fibre optic connector interfaces
• BS-EN-61754-6 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-6-1 - Fibre optic connector interfaces
• BS-EN-61754-6-100 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-7 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-7-1 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-61754-8 - Fibre optic connector interfaces. Type CF08 connector family
• BS-EN-61754-9 - Fibre optic connector interfaces
• BS-EN-61755-1 - Fibre optic connector optical interfaces
• BS-EN-61755-2-1 - Fibre optic connector optical interfaces
• BS-EN-61755-2-2 - Fibre optic connector optical interfaces
• BS-EN-61755-2-4 - Fibre optic interconnecting devices and passive components. Connector optical interfaces
• BS-EN-61755-2-5 - Fibre optic interconnecting devices and passive components. Connector optical interfaces
• BS-EN-61755-3-1 - Fibre optic connector optical interfaces
• BS-EN-61755-3-10 - Fibre optic interconnecting devices and passive components. Connector optical interfaces
• BS-EN-61755-3-2 - Fibre optic connector optical interfaces
• BS-EN-61755-3-31 - Fibre optic interconnecting devices and passive components. Connector optical interfaces
• BS-EN-61755-3-32 - Fibre optic interconnecting devices and passive components. Connector optical interfaces
• BS-EN-61755-3-5 - Fibre optic connector optical interfaces
• BS-EN-61755-3-6 - Fibre optic connector optical interfaces
• BS-EN-61755-3-7 - Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces
• BS-EN-61755-3-8 - Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces
• BS-EN-61756-1 - Fibre optic interconnecting devices and passive components. Interface standard for fibre management systems
• BS-EN-61757-1 - Fibre optic sensors
• BS-EN-61758-1 - Fibre optic interconnecting devices and passive components. Interface standard for closures
• BS-EN-61977 - Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification
• BS-EN-61978-1 - Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators
• BS-EN-62005-1 - Reliability of fibre optic interconnecting devices and passive optical components
• BS-EN-62005-2 - Reliability of fibre optic interconnecting devices and passive optical components
• BS-EN-62005-3 - Reliability of fibre optic interconnecting devices and passive optical components
• BS-EN-62005-4 - Reliability of fibre optic interconnecting devices and passive optical components
• BS-EN-62005-9-1 - Fibre optic interconnecting devices and passive components. Reliability
• BS-EN-62074-1 - Fibre optic interconnecting devices and passive components. Fibre optic WDM devices
• BS-EN-62077 - Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
• BS-EN-62148-10 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-11 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-12 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-15 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-16 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-18 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-2 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-3 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-7 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-8 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62148-9 - Fibre optic active components and devices. Package and interface standards
• BS-EN-62149-1 - Fibre optic active components and devices. Performance standards
• BS-EN-62149-2 - Fibre optic active components and devices. Performance standards
• BS-EN-62149-3 - Fibre optic active components and devices. Performance standards
• BS-EN-62149-4 - Fibre optic active components and devices. Performance standards
• BS-EN-62149-5 - Fibre optic active components and devices. Performance standards
• BS-EN-62149-7 - Fibre optic active components and devices. Performance standards
• BS-EN-62149-8 - Fibre optic active components and devices. Performance standards
• BS-EN-62149-9 - Fibre optic active components and devices. Performance standards
• BS-EN-62150-1 - Fibre optic active components and devices. Test and measurement procedures
• BS-EN-62150-3 - Fibre optic active components and devices. Test and measurement procedures
• BS-EN-62150-4 - Fibre optic active components and devices. Test and measurement procedures
• BS-EN-62150-5 - Fibre optic active components and devices. Test and measurement procedures
• BS-EN-62343-3-1 - Dynamic modules
• BS-EN-62343-3-3 - Dynamic modules
• BS-EN-62343-4-1 - Dynamic modules
• BS-EN-62664-1-1 - Fibre optic interconnecting devices and passive components. Fibre optic connector product specifications
• BS-EN-IEC-60869-1 - Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices
• BS-EN-IEC-61291-1 - Optical amplifiers
• BS-EN-IEC-61291-1-TC - Tracked Changes. Optical amplifiers
• BS-EN-IEC-61300-1 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-1 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-10 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-10-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-14 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-14-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-18 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-4 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-43 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-5 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-54 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-2-56 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-21 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-30 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-33 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-33-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-35 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-35-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-53 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-55 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61300-3-7-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• BS-EN-IEC-61753-053-02 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-053-02-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-071-02 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-091-02 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-1 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-101-03 - Fibre optic interconnecting devices and passive components performance standard
• BS-EN-IEC-61753-101-03-TC - Tracked Changes. Fibre optic interconnecting devices and passive components performance standard
• BS-EN-IEC-61753-111-07 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-111-07-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-111-08-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-111-09 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-111-09-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61753-131-03 - Fibre optic interconnecting devices and passive components. Performance standard
• BS-EN-IEC-61754-35 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-IEC-61754-4 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-IEC-61754-4-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-IEC-61754-6 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-IEC-61754-6-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-IEC-61754-7-2 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-IEC-61754-7-3 - Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces
• BS-EN-IEC-61755-1 - Fibre optic interconnecting devices and passive components. Connector optical interfaces for single-mode fibres
• BS-EN-IEC-61755-2-1 - Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres
• BS-EN-IEC-61755-2-1-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Connector optical interfaces for single-mode fibres
• BS-EN-IEC-61755-2-2 - Fibre optic interconnecting devices and passive components. Connector optical interfaces for single-mode fibres
• BS-EN-IEC-61755-6-2 - Fibre optic interconnecting devices and passive components. Connector optical interfaces
• BS-EN-IEC-61756-1 - Fibre optic interconnecting devices and passive components. Interface standard for fibre management systems
• BS-EN-IEC-61757 - Fibre optic sensors. Generic specification
• BS-EN-IEC-61757-2-1 - Fibre optic sensors
• BS-EN-IEC-61757-3-2 - Fibre optic sensors
• BS-EN-IEC-61757-4-3 - Fibre optic sensors
• BS-EN-IEC-61757-TC - Tracked Changes. Fibre optic sensors. Generic specification
• BS-EN-IEC-61977 - Fibre optic interconnecting devices and passive components. Fibre optic fixed filters. Generic specification
• BS-EN-IEC-62005-9-4 - Fibre optic interconnecting devices and passive components. Reliability
• BS-EN-IEC-62077 - Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
• BS-EN-IEC-62077-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification
• BS-EN-IEC-62148-19 - Fibre optic active components and devices. Package and interface standards
• BS-EN-IEC-62148-21 - Fibre optic active components and devices. Package and interface standards
• BS-EN-IEC-62148-6 - Fibre optic active components and devices. Package and interface standards
• BS-EN-IEC-62149-11 - Fibre optic active components and devices. Performance standards
• BS-EN-IEC-62149-3 - Fibre optic active components and devices. Performance standards
• BS-EN-IEC-62149-4 - Fibre optic active components and devices. Performance standards
• BS-EN-IEC-62149-4-TC - Tracked Changes. Fibre optic active components and devices. Performance standards
• BS-EN-IEC-62149-5 - Fibre optic active components and devices. Performance standards
• BS-EN-IEC-62150-6 - Fibre optic active components and devices. Test and measurement procedures
• BS-EN-IEC-62343-3-3 - Dynamic modules
• BS-EN-IEC-62343-3-4 - Dynamic modules
• BS-EN-IEC-63032 - Fibre optic interconnecting devices and passive components. Fibre optic tuneable bandpass filters. Generic specification
• BS-IEC-60874-10-1 - Connectors for optical fibres and cables. Detail specification for fibre optic connector type BFOC/2,5 terminated to multimode fibre type A1
• BS-IEC-60874-10-2 - Connectors for optical fibres and cables. Detail specification for fibre optic connector type BFOC/2,5 terminated to single-mode fibre type B1
• BS-IEC-60874-10-3 - Connectors for optical fibres and cables. Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre
• BS-IEC-61300-3-21 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Switching time
• BS-IEC-61314-1-1 - Fibre optic fan-outs. Blank detail specification. Environmental categories 1, 2, 3, 5 and 99
• BS-IEC-61756-1 - Fibre optic interconnecting devices and passive components. Interface standard for fibre management systems
• DD-IEC/PAS61300-3-29 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• DD-IEC/PAS61300-3-35 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• DD-IEC/PAS61300-3-43 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
• DD-IEC/PAS-61300-3-5 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements
• DD-IEC/PAS-61753-082 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Non-Con
• DD-IEC/PAS-61753-088 - Fibre optic interconnecting devices and passive components performance standard. Non-connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments
• DD-IEC/PAS-61753-1-3 - Fibre optic interconnecting devices and passive components performance standard. General and guidance for performance standards. Single-mode fibre optic connector performance for harsh industrial operating conditions
• DD-IEC/PAS-61754-18 - Fibre Optic Connector Interfaces, Type MT-Rj Connector Family
• DD-IEC/PAS-61754-19 - Fibre Optic Connector Interfaces, Type Sg Connector Family
• DD-IEC-PAS-61754-20 - Type Lc Connector Family
• DD-IEC/PAS-61754-20 - Fibre optic connector interfaces. Type LC connector family
• DD-IEC/PAS-61755-3-2 - Fibre optic connector optical interfaces. Optical interface. 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres
• DD-IEC/PAS61755-3-32 - Fibre optic connector optical interfaces. Optical interface. 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres
• DD-IEC/PAS-62074-1 - Fibre Optic Wdm Devices, Generic Specification
• PD-CLC-50378-2-1 - Passive components to be used in optical fibre communication systems. Product specifications. SC(SC2)-PC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre
• PD-CLC-50378-2-2 - Passive components to be used in optical fibre communication systems. Product specifications. SC(SC2)-APC connector-type fixed optical attenuators using IEC 60793-2 Category B1.1 singlemode fibre
• PD-IEC-60627-09 - Fibre optic interconnecting devices and passive components. Vocabulary for passive optical devices
• PD-IEC-62343-6-5 - Dynamic modules
• PD-IEC-62343-6-6 - Dynamic modules
• PD-IEC-62343-6-7 - Dynamic modules
• PD-IEC-62343-6-8 - Dynamic modules
• PD-IEC-62627-01 - Fibre optic interconnecting devices and passive components
• PD-IEC-62627-01-TC - Tracked Changes. Fibre optic interconnecting devices and passive components
• PD-IEC-62627-03-02 - Fibre optic interconnecting devices and passive components
• PD-IEC-62627-03-03 - Fibre optic interconecting devices and passive components
• PD-IEC-62627-03-04 - Fibre optic interconnecting devices and passive components
• PD-IEC-62627-04 - Fibre optic interconnecting devices and passive components
• PD-IEC-62627-05 - Fibre optic interconnecting devices and passive components
• PD-IEC-62627-08 - Fibre optic interconnecting devices and passive components
• PD-IEC-62627-09 - Fibre optic interconnecting devices and passive components. Vocabulary for passive optical devices
• PD-IEC-63334 - Fibre optic interconnecting devices and passive components. Conditions for testing the protection against dust and water ingress of passive optical protective housings and hardened fibre optic connectors (IP5X, IPX4, IPX5, IPX6)
• PD-IEC-PAS-63267-3-31 - Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces
• PD-R086-001 - Guidance for technology audit of fibre optic connector kits and terminated connectors

IEC:

• IEC-1300-2-27 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow
• IEC-1300-2-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure
• IEC-1300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention
• IEC-1300-2-7 - Part 2-7: Tests - Bending Moment, Fibre Optic Interconnecting Devices & Passive Components
• IEC-1300-3-11 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-11: Examinations and measurements - Engagement and separation forces
• IEC-1754-2 - Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family
• IEC-1754-8 - Fibre optic connector interfaces - Part 8: Type CF08 connector family
• IEC-60869-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
• IEC-60869-1-RL - Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
• IEC-60874-1 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
• IEC-60874-10-1 - Part 10-1: Detail Specification for Fibre Optic Connector Type Bfoc/2,5 Terminated To Mult
• IEC-60874-10-2 - Part 10-2: Detail Specification for Fibre Optic Connector Type Bfoc/2,5 Terminated To Sing
• IEC-60874-10-3 - Part 10-3: Detail Specification for Fibre Optic Adaptor Typebfoc/2,5 for Single & Multimo
• IEC-60874-1-1 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification
• IEC-60874-14-1 - Connectors for optical fibres and cables - Part 14-1: Detail specification for fibre optic connector type SC/PC standard terminated to multimode fibre type A1a, A1b
• IEC-60874-14-10 - Connectors for optical fibres and cables - Part 14-10: Fibre optic pigtail or patch cord connector type SC-APC untuned 8° terminated on single mode fibre type B1 - Detail specification
• IEC-60874-14-2 - Connectors for optical fibres and cables - Part 14-2: Detail specification for fibre optic connector type SC/PC tuned terminated to single-mode fibre type B1
• IEC-60874-14-3 - Connectors for optical fibres and cables - Part 14-3: Detail specification for fibre optic adaptor (simplex) type SC for single-mode fibre
• IEC-60874-14-4 - Connectors for optical fibres and cables - Part 14-4: Detail specification for fibre optic adaptor (simplex) type SC for multi-mode fibre
• IEC-60874-14-5 - Connectors for optical fibres and cables - Part 14-5: Detail specification for fibre optic connector type SC-PC untuned terminated to single-mode fibre type B1
• IEC-60874-14-6 - Part 14-6: Detail Specification for Fibre Optic Connector Type Sc-Apc 9 Deg Untuned Termin
• IEC-60874-14-7 - Connectors for optical fibres and cables - Part 14-7: Detail specification for fibre optic connector type SC-APC 9° tuned terminated to single-mode fibre Type B1
• IEC-60874-14-9 - Connectors for optical fibres and cables - Part 14-9: Fibre optic connector type SC-APC tuned 8° terminated on single mode fibre type B1 - Detail specification
• IEC-60874-19-1 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b - Detail specification
• IEC-60874-19-2 - Connectors for optical fibres and cables - Part 19-2: Fibre optic adaptor (duplex) type SC for single-mode fibre connectors - Detail specification
• IEC-60874-19-3 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors - Detail specification
• IEC-60875-1 - Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
• IEC-60876-1 - Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
• IEC-61073-1 - Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification
• IEC-61202-1 - Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
• IEC-61274-1 - Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
• IEC-61274-1-1 - Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification
• IEC-61280-2-9 - Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
• IEC-61290-10-3 - Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
• IEC-61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
• IEC-61300-1-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
• IEC-61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
• IEC-61300-2-10 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush and load resistance
• IEC-61300-2-11 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression
• IEC-61300-2-12 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
• IEC-61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
• IEC-61300-2-14-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
• IEC-61300-2-15 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism
• IEC-61300-2-16 - Part 2-16: Tests - Mould Growth, Fibre Optic Interconnecting Devices & Passive Compone
• IEC-61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
• IEC-61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat
• IEC-61300-2-18-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat
• IEC-61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
• IEC-61300-2-1-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
• IEC-61300-2-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
• IEC-61300-2-21 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
• IEC-61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
• IEC-61300-2-23 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices
• IEC-61300-2-24 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application
• IEC-61300-2-26 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist
• IEC-61300-2-28 - Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Corrosive atmosphere (sulphur dioxide)
• IEC-61300-2-33 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
• IEC-61300-2-34 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures
• IEC-61300-2-35 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation
• IEC-61300-2-37 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
• IEC-61300-2-38 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures
• IEC-61300-2-39 - Part 2-39: Tests - Susceptibility To External Magnetic Fields, Fibre Optic Interconnecting
• IEC-61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
• IEC-61300-2-40 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-40: Test - Screen testing of attenuation of single-mode tuned angled optical connectors
• IEC-61300-2-41 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-41: Tests - Screen testing of attenuation of single-mode tuned non-angled optical fibre connectors
• IEC-61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
• IEC-61300-2-43 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors
• IEC-61300-2-43-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors
• IEC-61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
• IEC-61300-2-45 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests - Durability test by water immersion
• IEC-61300-2-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic
• IEC-61300-2-46-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic
• IEC-61300-2-47 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
• IEC-61300-2-48 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling
• IEC-61300-2-49 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test
• IEC-61300-2-4-AM1 - Amendment 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
• IEC-61300-2-4-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
• IEC-61300-2-5 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
• IEC-61300-2-50 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode
• IEC-61300-2-51 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
• IEC-61300-2-52 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords
• IEC-61300-2-54 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas)
• IEC-61300-2-55 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor
• IEC-61300-2-56 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests - Wind resistance of mounted housing
• IEC-61300-2-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
• IEC-61300-2-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment
• IEC-61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
• IEC-61300-3-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination
• IEC-61300-3-10 - Part 3-10: Examinations & Measurements - Gauge Retention Force, Fibre Optic Interconne
• IEC-61300-3-12 - Part 3-12: Examinations & Measurements - Polarization Dependence of Attenuation of a Singl
• IEC-61300-3-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator
• IEC-61300-3-15 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface
• IEC-61300-3-16 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules
• IEC-61300-3-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules
• IEC-61300-3-18 - Part 3-18: Examinations & Measurements - Keying Accuracy of an Accuracy of an Angled
• IEC-61300-3-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-19: Examinations and measurements - Polarization dependence of return loss of a single-mode fibre optic component
• IEC-61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device
• IEC-61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices
• IEC-61300-3-21 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
• IEC-61300-3-21-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
• IEC-61300-3-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force
• IEC-61300-3-23 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface
• IEC-61300-3-24 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre
• IEC-61300-3-25 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed
• IEC-61300-3-26 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes
• IEC-61300-3-27 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-27: Examinations and measurements - Measurement method for the hole location of a multiway connector plug
• IEC-61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
• IEC-61300-3-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices
• IEC-61300-3-3 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss
• IEC-61300-3-30 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Endface geometry of rectangular ferrule
• IEC-61300-3-30-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Endface geometry of rectangular ferrule
• IEC-61300-3-31 - Part 3-31: Examinations & Measurements - Coupled Power Ratio Measurement for Fibre Opt
• IEC-61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components
• IEC-61300-3-33 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using pin gauges
• IEC-61300-3-34 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
• IEC-61300-3-35 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
• IEC-61300-3-36 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules
• IEC-61300-3-37 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres
• IEC-61300-3-39 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return loss measurements
• IEC-61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
• IEC-61300-3-40 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector
• IEC-61300-3-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-42: Examinations and measurements - Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves
• IEC-61300-3-43 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources
• IEC-61300-3-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-44: Examinations and measurements - Fibre optic trancsceiver receptacle endface visual and automated inspection
• IEC-61300-3-45 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors
• IEC-61300-3-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Measurement - Bore diameter for guide pin in MT ferrules
• IEC-61300-3-47 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry
• IEC-61300-3-48 - Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48: Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors
• IEC-61300-3-49 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors
• IEC-61300-3-5 - Part 3-5: Examinations & Measurements - Wavelength Dependence of Attenuation, Fibre Optic
• IEC-61300-3-50 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches
• IEC-61300-3-51 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors
• IEC-61300-3-52 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode fibres
• IEC-61300-3-53 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre)
• IEC-61300-3-53-RL - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre)
• IEC-61300-3-55 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components
• IEC-61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
• IEC-61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
• IEC-61300-3-9 - Fibre optic interconnecting devices and passive composants - Basic test and measurement procedures - Part 3-9: Examinations and measurements - Far-end crosstalk
• IEC-61314-1 - Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
• IEC-61753-021-2 - Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment
• IEC-61753-021-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment
• IEC-61753-021-6 - Fibre optic interconnecting devices and passive componentsperformance standard - Part 021-6: Grade B/2 single-mode fibre optic connectors for category O - Uncontrolled environment
• IEC-61753-022-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
• IEC-61753-031-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category C - Controlled environment
• IEC-61753-041-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
• IEC-61753-042-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style of OTDR reflecting devices for category C - Controlled environments
• IEC-61753-043-02 - Fibre optic interconnecting devices and passive components - Performance standard - Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective devices with cylindrical ferrule connectors for category C - Controlled environment
• IEC-61753-051-02 - Fibre optic interconnecting devices and passive components - Performance standard - Part 051-02: Plug-receptacle style single-mode fibre fixed optical attenuators for category C - Controlled environments
• IEC-61753-051-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment
• IEC-61753-052-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment
• IEC-61753-052-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment
• IEC-61753-053-02 - Fibre optic interconnecting devices and passive components - Performance standard - Part 053-02: Non-connectorized, single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
• IEC-61753-053-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
• IEC-61753-053-3 - Part 053-3: Continuously Variable Attenuators for Category U- Uncontrolled Environment, F
• IEC-61753-056-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment
• IEC-61753-057-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment
• IEC-61753-058-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment
• IEC-61753-059-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment
• IEC-61753-061-3 - Part 061-3: Single Mode Fibre Optic Pigtailed Style Isolators for Category U - Uncontrolle
• IEC-61753-062-6 - Part 062-6: Non-Connectorized Single-Mode Fibre Optic Pigtailed Isolators for Category
• IEC-61753-071-02 - Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
• IEC-61753-071-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 + 2 and 2 + 2 spatial switches for category C - Controlled environments
• IEC-61753-083-2 - Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment
• IEC-61753-084-2 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment
• IEC-61753-085-02 - Fibre optic interconnecting devices and passive components - Performance standard - Part 085-02: Non-connectorized single-mode pigtailed CWDM devices for category C - Indoor controlled environment
• IEC-61753-086-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
• IEC-61753-087-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category C - Controlled environment
• IEC-61753-087-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category O - Uncontrolled environment
• IEC-61753-088-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments
• IEC-61753-089-02 - Fibre optic interconnecting devices and passive components - Performance standard - Part 089-02: Non-connectorised single-mode bidirectional OTDR monitoring WWDM for category C - Indoor controlled environment
• IEC-61753-089-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
• IEC-61753-091-02 - Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments
• IEC-61753-091-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environments
• IEC-61753-091-3 - Part 091-3: Single Mode Fibre Optic Pigtailed Style Circulators for Category U - Uncontrol
• IEC-61753-092-6 - Part 092-6: Non-Connectorized Single-Mode Circulators for Category O - Uncontrolled En
• IEC-61753-1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
• IEC-61753-101-03 - Fibre optic interconnecting devices and passive components performance standard - Part 101-03: Fibre management systems for category OP - Outdoor protected environment
• IEC-61753-101-2 - Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for Category C - Controlled environment
• IEC-61753-101-3 - Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
• IEC-61753-1-1 - Part 1-1: General & Guidance - Interconnecting Devices (Connectors), Fibre Optic Interconn
• IEC-61753-111-07 - Fibre optic interconnecting devices and passive components - Performance standard - Part 111-07: Sealed closures - Category A - Aerial
• IEC-61753-111-08 - Fibre optic interconnecting devices and passive components - Performance standard - Part 111-08: Sealed closures for category G - Ground
• IEC-61753-111-09 - Fibre optic interconnecting devices and passive components - Performance standard - Part 111-09: Sealed closures - Category S - Subterranean
• IEC-61753-111-7 - Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures for category A - Aerial
• IEC-61753-111-8 - Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for category G - Ground
• IEC-61753-111-9 - Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean
• IEC-61753-121-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
• IEC-61753-121-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment
• IEC-61753-1-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I
• IEC-61753-131-03 - Fibre optic interconnecting devices and passive components - Performance standard - Part 131-03: Single-mode mechanical fibre splice for category OP . Outdoor protected environment
• IEC-61753-131-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
• IEC-61753-141-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments
• IEC-61753-143-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment
• IEC-61753-1-AM1 - Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
• IEC-61753-1-RL - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
• IEC-61753-2-1 - Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment
• IEC-61753-2-3 - Part 2-3: Non-Connectorised Single-Mode 1Xn & 2Xn Non-Wavelength-Selective Branching Devic
• IEC-61753-381-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)
• IEC-61753-381-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
• IEC-61753-382-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
• IEC-61754-1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance
• IEC-61754-10 - Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family
• IEC-61754-12 - Fibre optic connector interfaces - Part 12: Type FS connector family
• IEC-61754-13 - Fibre optic connector interfaces - Part 13: Type FC-PC connector
• IEC-61754-15 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family
• IEC-61754-16 - Fibre optic connector interfaces - Part 16: Type PN connector family
• IEC-61754-18 - Part 18: Type MT-Rj Connector Family, Fibre Optic Connectorinterfaces
• IEC-61754-19 - Fibre optic connector interfaces - Part 19: Type SG connector family
• IEC-61754-20 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family
• IEC-61754-20-100 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20-100: Interface standard for LC connectors with protective housings related to IEC 61076-3-106
• IEC-61754-20-AM1 - Amendment 1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family
• IEC-61754-21 - Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre
• IEC-61754-22 - Fibre optic connector interfaces - Part 22: Type F-SMA connector family
• IEC-61754-23 - Fibre optic connector interfaces - Part 23: Type LX.5 connector family
• IEC-61754-24 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24: Type SC-RJ connector family
• IEC-61754-24-11 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117
• IEC-61754-24-21 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06
• IEC-61754-25 - Fibre optic connector interfaces - Part 25: Type RAO connector family
• IEC-61754-26 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 26: Type SF connector family
• IEC-61754-27 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27: Type M12-FO connector family
• IEC-61754-28 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3 connector family
• IEC-61754-29 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29: Type BLINK connector series
• IEC-61754-30 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 30: Type CLIK connector series
• IEC-61754-31 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 31: Type N-FO connector family
• IEC-61754-32 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink connector family
• IEC-61754-34 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family
• IEC-61754-35 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 35: Type LSHE connector family for harsh environments
• IEC-61754-4 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
• IEC-61754-4-1 - Fibre optic connector interfaces - Part 4-1: Type SC connector family - Simplified receptacle SC-PC connector interfaces
• IEC-61754-4-100 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SC connector family - Simplified receptacle SC-PC connector interfaces
• IEC-61754-4 AM 1 - Amendment 1: Fibre Optic Connector Interfaces - Part 4: Typesc Connector Family
• IEC-61754-4 AM 2 - Amendment 2: Fibre Optic Connector Interfaces - Part 4: Typesc Connector Family
• IEC-61754-4-RL - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
• IEC-61754-5 - Fibre optic connector interfaces - Part 5: Type MT connector family
• IEC-61754-6 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family
• IEC-61754-6-1 - Fibre optic connector interfaces - Part 6-1: Type MU connector family - Simplified receptacle MU-PC connector interfaces
• IEC-61754-6-100 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100: Type MU connector family - Simplified receptacle MU-PC connector interfaces
• IEC-61754-6-2 - Amendment 2: Fibre Optic Connector Interfaces - Part 6: Typemu Connector Family
• IEC-61754-6-RL - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family
• IEC-61754-7 - Part 7: Type Mpo Connector Family, Fibre Optic Connecting Devices & Passive Components
• IEC-61754-7-1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row
• IEC-61754-7-2 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows
• IEC-61754-7-3 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-3: Type MPO connector family - Two fibre rows 16 fibre wide
• IEC-61755-1 - Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 1: Optical interfaces for dispersion unshifted fibres - General and guidance
• IEC-61755-2-1 - Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-1: Connection parameters of dispersion unshifted physically contacting fibres - Non-angled
• IEC-61755-2-2 - Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres - Angled
• IEC-61755-2-4 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications
• IEC-61755-2-5 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications
• IEC-61755-3-1 - Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre
• IEC-61755-3-10 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - non-angled, ferrule-less, bore alignment connectors
• IEC-61755-3-2 - Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
• IEC-61755-3-31 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules
• IEC-61755-3-32 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules
• IEC-61755-3-5 - Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
• IEC-61755-3-6 - Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
• IEC-61755-3-6-AM1 - Amendment 1 - Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
• IEC-61755-3-7 - Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre
• IEC-61755-3-8 - Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces- Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre
• IEC-61755-6-2 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 m core diameter multimode physically contacting fibres - Non-angled for reference connector application, at wavelength of 850 nm using selected A1a fibre only
• IEC-61758-1 - Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance
• IEC-61977 - Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification
• IEC-61977-RL - Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification
• IEC-61988-4 - Plasma display panels - Part 4: Climatic and mechanical testing methods
• IEC-62005-1 - Reliability of fibre optic interconnecting devices and passive components - Part 1: Introductory guide and definitions
• IEC-62005-2 - Reliability of fibre optic interconnecting devices and passive components - Part 2: Quantitative assessment of reliability based on accelerated ageing test - Temperature and humidity; steady state
• IEC-62005-3 - Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components
• IEC-62005-4 - Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Product screening
• IEC-62005-7 - Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling
• IEC-62005-9-1 - Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components
• IEC-62005-9-4 - Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C
• IEC-62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
• IEC-62077 - Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
• IEC-62077-RL - Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
• IEC-62099 - Fibre optic wavelength switches - Generic specification
• IEC-62148-10 - Part 10: Sff Mu Duplex 20-Pin Transceivers, Fibre Optic Active Components & Devices - Pack
• IEC-62148-11 - Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules
• IEC-62148-12 - Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector
• IEC-62148-12-AM1 - Amendment 1 - Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector
• IEC-62148-15 - Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages
• IEC-62148-15-RL - Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages
• IEC-62148-16 - Fibre optic active components and devices - Package and interface standards - Part 16: Transmitter and receiver components for use with LC connector interface
• IEC-62148-18 - Fiber optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface
• IEC-62148-19 - Fibre optic active components and devices - Package and interface standards - Part 19: Photonic chip scale package
• IEC-62148-21 - Fibre optic active components and devices - Package and interface standards - Part 21: Design guidelines of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA)
• IEC-62148-21-RL - Fibre optic active components and devices - Package and interface standards - Part 21: Design guidelines of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA)
• IEC-62148-22 - Fibre optic active components and devices - Package and interface standards - Part 22: 25 Gbit/s directly modulated laser packages with temperature control unit
• IEC-62148-3 - Fibre optic active components and devices - Package and interface standards - Part 3: SFF 20-pin transceivers
• IEC-62148-6 - Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers
• IEC-62148-6-RL - Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers
• IEC-62148-8 - Part 8: Sff Lc 20-Pin Transceivers, Fibre Optic Active Components & Devices - Package & In
• IEC-62148-9 - Part 9: Sff Mu Duplex 10-Pin Transceivers, Fibre Optic Active Components & Devices - Packa
• IEC-62149-1 - Fibre optic active components and devices - Performance standards - Part 1: General and guidance
• IEC-62149-11 - Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface
• IEC-62149-12 - Fibre optic active components and devices - Performance standards - Part 12: Distributed feedback laser diode device for analogue radio over fibre systems
• IEC-62149-2 - Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
• IEC-62149-3 - Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
• IEC-62149-3-RL - Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
• IEC-62149-4 - Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
• IEC-62149-5 - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
• IEC-62149-5-RL - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
• IEC-62149-6 - Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers
• IEC-62149-7 - Fibre optic active components and devices - Performance standards - Part 7: 1 310-nm discrete vertical cavity surface emitting laser devices
• IEC-62149-8 - Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices
• IEC-62149-9 - Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers
• IEC-62150-1 - Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance
• IEC-62150-2 - Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers
• IEC-62150-3 - Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces
• IEC-62150-4 - Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system
• IEC-62150-5 - Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters
• IEC-62150-6 - Fibre optic active components and devices - Test and measurement procedures - Part 6: Universal mezzanine boards for test and measurement of photonic devices
• IEC-62300 - Consumer audio/video equipment digital interface with plastic optical fibre
• IEC-62343-3-1 - Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
• IEC-62343-3-3 - Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
• IEC-62343-3-3-RL - Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
• IEC-62343-4-1 - Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch
• IEC-62343-6-5 - Dynamic modules - Part 6-5: Design guide - Investigation of operating mechanical shock and vibration tests for dynamic modules
• IEC-62343-6-6 - Dynamic modules - Part 6-6: Design guide - Failure mode effect analysis for optical units of dynamic modules
• IEC-62343-6-7 - Dynamic modules - Part 6-7: Design guide - Optical channel monitor
• IEC-62343-6-8 - Dynamic modules - Part 6-8: Categorization study of dynamic performance requirements
• IEC-62627-01 - Fibre optic interconnecting devices and passive components - Part 01: Fibre optic connector cleaning methods
• IEC-62627-01-RL - Fibre optic interconnecting devices and passive components - Part 01: Fibre optic connector cleaning methods
• IEC-62627-03-02 - Fiber optic interconnecting devices and passive components - Part 03-02: Reliability - Report of high power transmission test of specified passive optical components
• IEC-62627-03-03 - Fibre optic interconnecting devices and passive components - Part 03-03: Reliability - Report on high-power reliability for metal-doped optical fibre plug-style optical attenuators
• IEC-62627-03-04 - Fibre optic interconecting devices and passive components - Part 03-04: Reliability - Guideline for high power reliability of passive optical components
• IEC-62627-04 - Fibre optic interconnecting devices and passive components - Part 04: Example of uncertainty calculation: Measurement of the attenuation of an optical connector
• IEC-62627-05 - Fibre optic interconnecting devices and passive components - Part 05: Investigation on impact of contamination and scratches on optical performance of single-mode (SM) and multimode (MM) connectors
• IEC-62627-06 - Fibre optic interconnecting devices and passive components - Part 06: Mechanical design proving nutation test results for reinforced fibre cable terminated with optical connectors for high density patching applications
• IEC-62627-08 - Fibre optic interconnecting devices and passive components - Part 08: Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
• IEC-62627-09 - Fibre optic interconnecting devices and passive components - Vocabulary for passive optical devices
• IEC-62664-1-1 - Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre
• IEC-62965 - Fibre optic interconnecting devices and passive components - Ferrule assembly and fusion splicer interface dimensions for a fusion splice on connector
• IEC-63334 - Fibre optic interconnecting devices and passive components - Conditions for testing the protection against dust and water ingress of passive optical protective housings and hardened fibre optic connectors (IP5X, IPX4, IPX5, IPX6)
• IEC/PAS-61300-3-29 - Part 3-29: Examinations & Measurements - Measurement Techniques for Characterizing the Amp
• IEC/PAS-61300-3-38 - Part 3-38: Group Delay & Chromatic Dispersion, Fibre Optic Interconnecting Devices & P
• IEC/PAS-61300-3-43 - Part 3-43: Examinations & Measurements - Mode Transfer Function Measurement for Fibre
• IEC/PAS-61753-081-2 - Part 081-2: Non-Connectorized Single-Mode Fibre Optic Middle-Scale 1 X N Dwdm Devices
• IEC/PAS-61753-088-2 - Part 088-2: Non-Connectorized Single-Mode Fibre Optic Lan Wdm Devices With Channel Spa
• IEC/PAS-61753-1-3 - Fibre optic interconnecting devices and passive components performance standard - Part 1-3: General and guidance for performance standards - Single-mode fibre optic connector performance for harsh industrial operating conditions
• IEC/PAS-61755-3-31 - Part 3-31: Optical Interface - 8 Degrees Angled Pc End-Face Pps Rectangular Ferrule,
• IEC/PAS-61755-3-32 - Fibre optic connector optical interfaces - Part 3-32: Optical interface - 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres
• IEC/PAS-62005-9-2 - Part 9-2: Reliability Qualification for Fibre Optic Connectors, Fibre Optic Interconnectin
• IEC/PAS-62074-1 - Part 1: Generic Specification, Fibre Optic Wdm Devices
• IEC/PAS-62336 - Accelerated Moisture Resistance - Unbiased Hast
• IEC/PAS-63023 - Fibre optic interconnecting devices and passive components - Part 01: Fibre optic connector cleaning methods
• IEC/PAS-63267-3-30 - Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-30: End face geometry - Angled PC end face PPS rectangular ferrule multimode A1b fibres
• IEC/PAS-63267-3-31 - Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-31: End face geometry - Flat PC PPS rectangular ferrule multimode fibres

Other SDOs:

• DIN-EN-50516-1-1 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the
• EN-186002 - Specification for Harmonized System of Quality Assessment for Electronic Components, B
• EN-186150 - Connector Sets for Optical Fibres & Cables, Type OCCA-Bu
• EN-186160 - Connector Sets for Optical Fibres & Cables, Type OCCA-Pc
• EN-186170 - Harmonized System of Quality Assessment for Electronic Components, Sectional Specifica
• EN-50377-10-1 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-10-2 - Connectors Sets & Interconnect Components To Be Used in Optical Fibre Communication Sy
• EN-50377-11-1 - Connector Sets & Nterconnect Components To Be Used in Optical Fibre Communication Syst
• EN-50377-13-2 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
• EN-50377-13-3 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
• EN-50377-14-1 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 14-1: Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C
• EN-50377-15-1 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
• EN-50377-16-1 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 16-1: Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
• EN-50377-17-1 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-1: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto IEC 60793-2-50 category B1.3 or B6a_1 or B6a_2 singlemode fibre, category C
• EN-50377-17-2 - Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 17-2: Type FPFT (factory polished field terminated) simplex connector factory terminated with EN 60793-2-50 category B1.3 fibre and field mounted onto reinforced cable containing IEC 60793-2-50 category B1.3 or B6a1 or B6a 2 singlemode fibre (with restricted MFD), category C
• EN-50377-18-1 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1: type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category A1a.3a or A1a.3b 50/125 micron multimode fibre
• EN-50377-2-2 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-3-1 - Connector Sets & Interconnect Components To Be Use in Optical Fibre Communication Syst
• EN-50377-4-2 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8 Degrees terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
• EN-50377-4-4 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
• EN-50377-6-2 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-7-4 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-4: LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C
• EN-50377-8-10 - Part 8-10: Type LSH-Apc Simplex Terminated on IEC-60793-2-5 Category B1.1 & B1.3 Sing
• EN-50377-8-11 - Part 8-11: Type LSH-Pc Simplex Terminated on IEC-60793-2-50 Category B1.1 & B1.3 Sing
• EN-50377-8-12 - Part 8-12: Type LSH-Apc Simplex Terminated on IEC-60793-2-50 Category B1.1 & B1.3 Sing
• EN-50377-8-13 - Part 8-13: Type LSH-Pc Simplex Terminated on IEC-60793-2-50 Cateogry B1.1 & B1.3 Sing
• EN-50377-8-2 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-8-3 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-8-4 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-8-5 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-8-6 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-8-7 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-8-8 - Connector Sets & Interconnect Components To Be Used in Optical Fibre Communication Sys
• EN-50377-8-9 - Part 8-9: LSH-Pc Simplex Terminated on IEC-60793-2-50 Category B1.1 & B1.3 Singlemode
• EN-50378-3-1 - Passive Components To Be Used in Optical Fibre Communication Systems, Product Specific
• EN-50378-3-2 - Part 3-2: Type 4/8 Channel Cwdm Module Terminated in IEC-60793-2-50 Category B1.1 & B1
• EN-50411-2 - Fibre Organizers & Closures To Be Used in Optical Fibre Communication Systems, Product
• EN-50411-2-10 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-10: Sealed fibre splice closures type 2, category G, for FTTH optical distribution networks
• EN-50411-2-2 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S and A
• EN-50411-2-3 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealed inline fibre splice closures Type 1, for category S and A
• EN-50411-2-4 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S and A
• EN-50411-2-5 - Fibre Organizers & Closures To Be Used in Optical Fibre Communication Systems, Product
• EN-50411-2-8 - Fibre Organizers & Closures To Be Used in Optical Fibre Communication Systems, Product
• EN-50411-2-9 - Part 2-9: Non-Sealed Closures for Air Blown Fibre Microduct Cable, for Category S & A
• EN-50411-3-1 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C and G
• EN-50411-3-2 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice
• EN-50411-3-3 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors
• EN-50411-3-4 - Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-4: Wall box for splice to patchcord connections, for category C and A
• EN-50411-3-5 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet
• EN-50411-3-6 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
• EN-50411-3-8 - Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C
• EN-50411-4-1 - Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 4-1: Passive optical street cabinet for category A
• EN-50516-1-1 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 1-1: Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC/PAS 61753-1-3
• EN-50516-2-1 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 2-1: Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
• EN-50516-3-1 - Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
• EN-60869-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
• EN-60874-1 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
• EN-60874-1-1 - Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification
• EN-60875-1 - Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
• EN-60876-1 - Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
• EN-61202-1 - Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
• EN-61274-1 - Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
• EN-61274-1-1 - Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification
• EN-61280-2-9 - Part 2-9: Digital Systems - Optical Signal-To-Noise Ratio Measurement for Dense Wavele
• EN-61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
• EN-61300-2-1 - Part 2-1: Tests - Vibration (Sinusoidal), Fibre Optic Interconnecting Devices & Passiv
• EN-61300-2-10 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush resistance
• EN-61300-2-11 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression
• EN-61300-2-12 - Part 2-12: Tests - Impact, Fibre Optic Interconnecting Devices & Passive Components -
• EN-61300-2-13 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
• EN-61300-2-15 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-16 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
• EN-61300-2-2 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-20 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-21 - Part 2-21: Tests - Composite Temperature/Humidity Cyclic Test, Fibre Optic Interconnec
• EN-61300-2-22 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-23 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-24 - Part 2-24: Tests - Screen Testing of Ceramic Alignment Split Sleeve by Stress Applicat
• EN-61300-2-25 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-26 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-27 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide)
• EN-61300-2-29 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-30 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-31 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-32 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-33 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
• EN-61300-2-34 - Part 2-34: Tests - Resistance To Solvents & Contaminating Fluids of Interconnecting Co
• EN-61300-2-35 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation
• EN-61300-2-36 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-37 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures
• EN-61300-2-38 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-4 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
• EN-61300-2-43 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors
• EN-61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
• EN-61300-2-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic
• EN-61300-2-47 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks
• EN-61300-2-48 - Part 2-48: Tests - Temperature-Humidity Cycling, Fibre Optic Interconnecting Devices &
• EN-61300-2-49 - Firbre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pr
• EN-61300-2-5 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
• EN-61300-2-50 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-51 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-52 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords
• EN-61300-2-55 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor
• EN-61300-2-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
• EN-61300-2-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment
• EN-61300-2-8 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
• EN-61300-3-1 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-10 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-11 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-13 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable optical attenuator
• EN-61300-3-15 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-2 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-21 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
• EN-61300-3-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force
• EN-61300-3-24 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-25 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed
• EN-61300-3-27 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
• EN-61300-3-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices
• EN-61300-3-3 - Part 3-3: Examinations & Measurements - Active Monitoring of Changes in Attenuation &
• EN-61300-3-32 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-33 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
• EN-61300-3-34 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-35 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
• EN-61300-3-39 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return loss measurements
• EN-61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
• EN-61300-3-42 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-43 - Part 3-43: Examinations & Measurements - Mode Transfer Function Measurement for Fibre
• EN-61300-3-45 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors
• EN-61300-3-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Measurement - Bore diameter for guide pin in MT ferrules
• EN-61300-3-47 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry
• EN-61300-3-48 - Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48: Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors
• EN-61300-3-49 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors
• EN-61300-3-50 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches
• EN-61300-3-51 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors
• EN-61300-3-52 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode fibres
• EN-61300-3-53 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre)
• EN-61300-3-6 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
• EN-61300-3-8 - Fibre Optic Interconnecting Devices & Passive Components, Basic Test & Measurement Pro
• EN-61313-1 - Fibre Optic Passive Components & Cable Assemblies, Capability Approval, Generic Specif
• EN-61314-1 - Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
• EN-61314-1-1 - Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification
• EN-61753-021-2 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Grade C
• EN-61753-021-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment
• EN-61753-021-6 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Grade B
• EN-61753-022-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
• EN-61753-031-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1+ùN and 2+ùN non-wavelength-selective branching devices for Category C - Controlled environment
• EN-61753-041-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 041-2: Non-connectorized single-mode OTDR reflecting device for category C - Controlled environment
• EN-61753-051-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment
• EN-61753-052-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment
• EN-61753-052-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenuator - Category O in outside plant environment
• EN-61753-053-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
• EN-61753-056-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 056-2: Single mode fibre pigtailed style optical fuse for category C - Controlled environment
• EN-61753-057-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment
• EN-61753-058-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter for category C - Controlled environment
• EN-61753-059-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 059-2: Single-mode fibre plug-receptacle style optical limiter for category C - Controlled environment
• EN-61753-062-6 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Non-Con
• EN-61753-071-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 +ù 2 and 2 +ù 2 spatial switches for category C - Controlled environments
• EN-61753-083-2 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Non-Con
• EN-61753-084-2 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Non Con
• EN-61753-086-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment
• EN-61753-087-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment
• EN-61753-087-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment
• EN-61753-088-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments
• EN-61753-089-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment
• EN-61753-091-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2: Non-connectorized single-mode fibre optic pigtailed circulators for category C - Controlled environment
• EN-61753-092-6 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Non-Con
• EN-61753-1 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, General
• EN-61753-101-2 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Fibre M
• EN-61753-101-3 - Fibre Optic Interconnecting Devices & Passive Components Performance Standard, Fibre M
• EN-61753-111-7 - Part 111-7: Sealed Closures for Category a - Aerial, Fibre Optic Interconnecting Devic
• EN-61753-111-8 - Part 111-8: Sealed Closures for Category g - Ground, Fibre Optic Interconnecting Devic
• EN-61753-111-9 - Part 111-9: Sealed Closures for Category S - Subterranean, Fibre Optic Interconnecting
• EN-61753-121-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment
• EN-61753-121-3 - Part 121-3: Simplex & Duplex Cords With Single-Mode Fibre & Cylindrical Ferrule Conne
• EN-61753-1-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1-3: General and guidance for single-mode fibre optic connector and cable assembly for industrial environment, Category I
• EN-61753-131-3 - Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment
• EN-61753-143-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C - Controlled environment
• EN-61753-381-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)
• EN-61753-381-6 - Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
• EN-61753-382-2 - Fibre optic interconnecting devices and passive components - Performance standard - Part 382-2: Non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C - Controlled environment
• EN-61754-1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance
• EN-61754-13 - Fibre Optic Connector Interfaces, Type FC-Pc Connector
• EN-61754-15 - Part 15: Type Lsh Connector Family, Fibre Optic Interconnecting Devices & Passive Comp
• EN-61754-20 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family
• EN-61754-20-100 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20-100: Interface standard for LC connectors with protective housings related to IEC 61076-3-106
• EN-61754-24 - Part 24: Type Sc-Rj Connector Family, Fibre Optic Interconnecting Devices & Passive Co
• EN-61754-24-11 - Part 24-11: Type Sc-Rj Connectors With Protective Housings Based on IEC-61076-3-117, F
• EN-61754-24-21 - Part 24-21: Type Sc-Rj Connectors With Protective Housings Based on IEC-61076-3-106, V
• EN-61754-25 - Fibre Optic Connector Interfaces, Type Rao Connector Family
• EN-61754-26 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 26: Type SF connector family
• EN-61754-27 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27: Type M12-FO connector family
• EN-61754-28 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3 connector family
• EN-61754-29 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 29: Type BLINK connector series
• EN-61754-30 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 30: Type CLIK connector series
• EN-61754-31 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 31: Type N-FO connector family
• EN-61754-32 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink connector family
• EN-61754-34 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family
• EN-61754-4 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family
• EN-61754-4-100 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SC connector family - Simplified receptacle SC-PC connector interfaces
• EN-61754-6 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family
• EN-61754-6-100 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100: Type MU connector family - Simplified receptacle MU-PC connector interfaces
• EN-61754-7 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row
• EN-61754-7-1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row
• EN-61754-8 - Fibre Optic Connector Interfaces, Type Cf08 Connector Family
• EN-61754-9 - Fibre Optic Connector Interfaces, Types DS Connector Family
• EN-61755-1 - Fibre Optic Connector Optical Interfaces, Optical Interfaces for Single Mode Non-Dispe
• EN-61755-2-1 - Fibre Optic Connector Optical Interfaces, Optical Interface Standard Single Mode Non-
• EN-61755-2-2 - Fibre Optic Connector Optical Interfaces, Optical Interface Standard Single Mode Angl
• EN-61755-2-4 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-4: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Non-angled for reference connection applications
• EN-61755-2-5 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-5: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - Angled for reference connection applications
• EN-61755-3-1 - Fibre Optic Connector Optical Interfaces, Optical Interface, 2,5 mm & 1,25 mm Diameter
• EN-61755-3-10 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Non-angled, ferrule-less, bore alignment connectors
• EN-61755-3-2 - Fibre Optic Connector Optical Interfaces, Optical Interface, 2,5 mm & 1,25 mm Diameter
• EN-61755-3-31 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-31: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled polyphenylene sulphide rectangular ferrules
• EN-61755-3-32 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-32: Connector parameters of non-dispersion shifted single mode physically contacting fibres - Angled thermoset epoxy rectangular ferrules
• EN-61755-3-5 - Fibre Optic Connector Optical Interfaces, Optical Interface, 2,5 mm & 1,25 mm Diameter
• EN-61755-3-6 - Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
• EN-61755-3-7 - Fibre Optic Interconnecting Devices & Passive Components, Fibre Optic Connector Optica
• EN-61755-3-8 - Fibre Optic Interconnecting Devices & Passive Components, Fibre Optic Connector Optica
• EN-61756-1 - Fiber Optic Interconnecting Devices & Passive Components, Interface Standard for Fibre
• EN-61758-1 - Fibre Optic Interconnecting Devices & Passive Components, Interface Standard for Closu
• EN-61977 - Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification
• EN-61978-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification
• EN-62005-9-1 - Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components
• EN-62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
• EN-62077 - Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification
• EN-62148-11 - Part 11: 14-Pin Active Device Modules, Fibre Optic Active Components & Devices - Packa
• EN-62148-15 - Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages
• EN-62148-16 - Part 16: Transmitter & Receiver Components for Use With Lc Connector Interface, Fibre
• EN-62148-18 - Fibre optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface
• EN-62148-2 - Fibre optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface
• EN-62148-3 - Fibre optic active components and devices - Package and interface standards - Part 3: SFF 20-pin transceivers
• EN-62149-2 - Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
• EN-62149-3 - Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems
• EN-62149-4 - Part 4: 1300 mm Fibre Optic Transceivers for Gigabit Ethernet Application, Fibre Optic
• EN-62149-5 - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
• EN-62149-6 - Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers
• EN-62149-7 - Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices
• EN-62149-8 - Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices
• EN-62149-9 - Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers
• EN-62150-2 - Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers
• EN-62150-3 - Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces
• EN-62150-4 - Part 4: Relative Intensity Noise Using a Time-Domain Optical Detection System, Fibre O
• EN-62150-5 - Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters
• EN-62343-3-1 - Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
• EN-62343-3-3 - Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
• EN-62343-4-1 - Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch
• EN-62664-1-1 - Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre
• EN-IEC-61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention (IEC 61300-2-4:2019)
• EN-IEC-61300-2-46 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic (IEC 61300-2-46:2019)
• EN-IEC-61754-7-2 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows
• EN-IEC-61754-7-3 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-3: Type MPO connector family - Two fibre rows 16 fibre wide (IEC 61754-7-3:2019)
• EN-IEC-61755-6-2 - Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 -m core diameter multimode physically contacting fibres - Non-angled for reference connector application, at wavelength of 850 nm using selected A1a fibre only
• EN-IEC-62148-19 - Fibre optic active components and devices - Package and interface standards - Part 19: Photonic chip scale package (IEC 62148-19:2019)
• EN-IEC-62148-21 - Fibre optic active components and devices - Package and interface standards - Part 21: Design guide of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA) (IEC 62148-21:2019)
• EN-IEC-63032 - Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification
• IEC-63032 - Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification
• JIS-C-5860 - General rules of passive devices for light beam transmission
• JIS-C-5871 - Test methods of interference filters
• JIS-C-5900 - General rules of passive devices for fiber optic transmission
• JIS-C-5901 - Test methods of passive devices for fibre optic transmission
• JIS-C-5901/A1 - Test methods of passive devices for fibre optic transmission (Amendment 1)
• JIS-C-5973 - F04 Type Connectors for Optical Fiber Cables
• JIS-C-6110 - General rules of transmitting and receiving modules for low speed fiber optic transmission
• JIS-C-6111 - Measuring methods of transmitting and receiving modules for low speed fiber optic transmission
• UNE-EN-62005-9-1 - Fibre optic interconnecting devices and passive components - Reliability - Part 9-1: Qualification of passive optical components