Document Center List of Standards on Optic Amplifiers
ICS Code 33.180.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
BSI:
- BS-EN-61280-1-1 - Fibre optic communication subsystem basic test procedures
- BS-EN-61290-1 - Optical amplifiers. Test methods
- BS-EN-61290-10-1 - Optical amplifiers. Test methods
- BS-EN-61290-10-2 - Optical amplifiers. Test methods
- BS-EN-61290-10-4 - Optical amplifiers. Test methods
- BS-EN-61290-10-5 - Optical amplifiers. Test methods
- BS-EN-61290-1-1 - Optical amplifiers. Test methods
- BS-EN-61290-11-1 - Optical amplifiers. Test methods
- BS-EN-61290-11-2 - Optical amplifiers. Test methods
- BS-EN-61290-1-2 - Optical amplifiers. Test methods
- BS-EN-61290-1-3 - Optical amplifiers. Test methods
- BS-EN-61290-2-1 - Optical fibre amplifiers. Basic specification. Test methods for optical power parameters. Optical spectrum analyzer
- BS-EN-61290-2-3 - Optical fibre amplifiers. Basic specification
- BS-EN-61290-3 - Optical amplifiers. Test methods
- BS-EN-61290-3-2 - Optical amplifiers. Test methods
- BS-EN-61290-3-3 - Optical amplifiers. Test methods
- BS-EN-61290-4-1 - Optical amplifiers. Test methods
- BS-EN-61290-4-2 - Optical amplifiers. Test methods
- BS-EN-61290-4-3 - Optical amplifiers. Test methods
- BS-EN-61290-5-1 - Optical amplifiers. Test methods
- BS-EN-61290-5-3 - Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters
- BS-EN-61290-7-1 - Optical amplifiers. Test methods
- BS-EN-61291-2 - Optical amplifiers
- BS-EN-61291-4 - Optical amplifiers
- BS-EN-61291-5-2 - Optical amplifiers
- BS-EN-61291-6-1 - Optical amplifiers
- BS-EN-62129 - Calibration of optical spectrum analyzers
- BS-EN-62129-2 - Calibration of wavelength/optical frequency measurement instruments
- BS-EN-62148-4 - Fibre optic active components and devices. Package and interface standards
- BS-EN-62343-1-2 - Dynamic modules
- BS-EN-IEC-61290-1 - Optical amplifiers. Test methods
- BS-EN-IEC-61290-1-1 - Optical amplifiers. Test methods
- BS-EN-IEC-61290-4-3 - Optical amplifiers. Test methods
- BS-EN-IEC-61290-4-4 - Optical amplifiers. Test methods
- BS-EN-IEC-61291-1 - Optical amplifiers
- BS-EN-IEC-61291-1-TC - Tracked Changes. Optical amplifiers
- BS-EN-IEC-61291-2 - Optical amplifiers. Single channel applications. Performance specification template.
- BS-EN-IEC-61291-2-TC - Tracked Changes. Optical amplifiers. Single channel applications. Performance specification template.
- BS-IEC-61290-4-3 - Optical amplifiers. Test methods. Power transient parameters. Single channel optical amplifiers in output power control
- DD-IEC/PAS-61290-3-1 - Optical Fibre Amplifiers, Basic Specification, Test Methodsfor Noise Figure Parameter
- PD-IEC-61292-1 - Optical amplifiers
- PD-IEC-61292-12 - Optical amplifiers
- PD-IEC-61292-1-TC - Tracked Changes. Optical amplifiers
- PD-IEC-61292-2 - Optical amplifier technical reports
- PD-IEC-61292-4 - Optical amplifiers
- PD-IEC-61292-4-TC - Tracked Changes. Optical amplifiers
- PD-IEC-61292-5 - Optical amplifiers
- PD-IEC-61292-6 - Optical amplifiers
- PD-IEC-61292-6-TC - Tracked Changes. Optical amplifiers
- PD-IEC-61292-7 - Optical amplifiers
- PD-IEC-61292-8 - Optical amplifiers
- PD-IEC-61292-9 - Optical amplifiers
- PD-IEC-61292-9-TC - Tracked Changes. Optical amplifiers
- PD-IEC-62129-3 - Calibration of wavelength/optical frequency measurement instruments
IEC:
- IEC-61282-6 - Fibre optic communication system design guides - Part 6: Skew design in parallel optical interconnection systems
- IEC-61290-1 - Optical amplifiers - Test methods - Part 1: Power and gain parameters
- IEC-61290-10-1 - Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
- IEC-61290-10-2 - Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
- IEC-61290-10-4 - Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
- IEC-61290-10-5 - Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
- IEC-61290-1-1 - Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
- IEC-61290-11-1 - Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
- IEC-61290-11-2 - Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - PoincarT sphere analysis method
- IEC-61290-1-2 - Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
- IEC-61290-1-3 - Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
- IEC-61290-1-3-RL - Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
- IEC-61290-1-RL - Optical amplifiers - Test methods - Part 1: Power and gain parameters
- IEC-61290-2-1 - Part 2-1: Test Methods for Optical Power Parameters - Optical Spectrum Analyzer, Optical
- IEC-61290-2-2 - Part 2-2: Test Methods for Optical Power Parameters - Electrical Spectrum Analyzer, Optica
- IEC-61290-2-3 - Part 2-3: Test Methods for Optical Power Parameter - Opticalpower Meter, Optical Fibre
- IEC-61290-3 - Optical amplifiers - Test methods - Part 3: Noise figure parameters
- IEC-61290-3-1 - Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
- IEC-61290-3-2 - Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
- IEC-61290-3-3 - Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
- IEC-61290-4-1 - Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
- IEC-61290-4-3 - Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
- IEC-61290-4-4 - Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
- IEC-61290-5-1 - Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
- IEC-61290-5-2 - Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
- IEC-61290-5-3 - Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer
- IEC-61290-6-1 - Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
- IEC-61290-7-1 - Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
- IEC-61291-1 - Optical amplifiers - Part 1: Generic specification
- IEC-61291-2 - Optical amplifiers - Part 2: Single channel applications - Performance specification template
- IEC-61291-2-RL - Optical amplifiers - Part 2: Single channel applications - Performance specification template
- IEC-61291-4 - Optical amplifiers - Part 4: Multichannel applications - Performance specification template
- IEC-61291-5-2 - Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
- IEC-61291-6-1 - Optical amplifiers - Part 6-1: Interfaces - Command set
- IEC-61292-1 - Optical amplifiers - Part 1: Parameters of optical fibre amplifier components
- IEC-61292-12 - Optical amplifiers - Part 12: Optical fibre amplifiers for space division multiplexing transmission
- IEC-61292-2 - Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer
- IEC-61292-3 - Optical amplifiers - Part 3: Classification, characteristics and applications
- IEC-61292-4 - Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers
- IEC-61292-4-RL - Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers
- IEC-61292-5 - Optical amplifiers - Part 5: Polarization mode dispersion parameter - General information
- IEC-61292-6 - Optical amplifiers - Part 6: Distributed Raman amplification
- IEC-61292-6-RL - Optical amplifiers - Part 6: Distributed Raman amplification
- IEC-61292-7 - Optical amplifiers - Part 7: Four wave mixing effect in optical amplifiers
- IEC-61292-8 - Optical amplifiers . Part 8: High-power amplifiers
- IEC-61292-9 - Optical amplifiers - Part 9: Semiconductor optical amplifiers (SOAs)
- IEC-61292-9-RL - Optical amplifiers - Part 9: Semiconductor optical amplifiers (SOAs)
- IEC-62129 - Calibration of optical spectrum analyzers
- IEC-62129-2 - Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
- IEC-62129-3 - Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb
- IEC-62148-4 - Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers
- IEC-62343-1-2 - Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)
Other SDOs:
- EN-186001 - Specification for Harmonized System of Quality Assessment for Electronic Components, B
- EN-61290-1 - Optical amplifiers - Test methods - Part 1: Power and gain parameters
- EN-61290-10-1 - Part 10-1: Multichannel Parameters - Pulse Method Using an Optical Switch & Optical Sp
- EN-61290-10-2 - Optical Fibre Amplifiers, Test Methods, Multichannel Parameters, Pulse Method Using A
- EN-61290-10-4 - Optical Amplifiers, Test Methods, Multichannel Parameters, Interpolated Source Subtrac
- EN-61290-10-5 - Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
- EN-61290-1-1 - Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
- EN-61290-11-1 - Optical Amplifiers, Test Methods, Polarization Mode Dispersion Parameter, Jones Matrix
- EN-61290-1-2 - Optical Amplifiers, Test Methods, Power & Gain Parameters, Electrical Spectrum Analyze
- EN-61290-1-3 - Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
- EN-61290-3 - Optical Amplifiers, Test Methods, Noise Figure Parameters
- EN-61290-3-2 - Part 3-2: Noise Figure Parameters - Electrical Spectrum Analyzer Method, Optical Ampli
- EN-61290-3-3 - Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
- EN-61290-4-1 - Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
- EN-61290-4-2 - Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
- EN-61290-4-3 - Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
- EN-61290-7-1 - Optical Amplifiers, Test Methods, Out-Of-Band Insertion Losses, Filtered Optical Power
- EN-61291-1 - Optical amplifiers - Part 1: Generic specification
- EN-61291-2 - Optical amplifiers - Part 2: Single channel applications - Performance specification template
- EN-61291-4 - Optical amplifiers - Part 4: Multichannel applications - Performance specification template
- EN-61291-5-2 - Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
- EN-61291-6-1 - Optical Amplifiers, Interfaces, Command Set
- EN-62129 - Calibration of Optical Spectrum Analyzers
- EN-62129-2 - Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
- EN-62343-1-2 - Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)
- EN-IEC-61290-4-3 - Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
- EN-IEC-61290-4-4 - Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
- EN-IEC-61291-1 - Optical amplifiers - Part 1: Generic specification