Document Center List of Standards on Other Fibre Optic Equipment
ICS Code 33.180.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-EN-50411-2-4 - Fibre management systems and protective housings to be used in optical fibre communication systems. Product specifications
- BS-EN-50411-3-8 - Fibre organizers and closures to be used in optical fibre communication systems. Product specifications
- BS-EN-50411-4-1 - Fibre management systems and protective housings to be used in optical fibre communication systems. Product specifications
- BS-EN-61300-3-4 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
- BS-EN-61744 - Calibration of fibre optic chromatic dispersion test sets
- BS-EN-61753-051-3 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-61753-2-3 - Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on single-mode fibre for category U
- BS-EN-61757-1-1 - Fibre optic sensors
- BS-EN-61757-2-2 - Fibre optic sensors
- BS-EN-62005-1 - Reliability of fibre optic interconnecting devices and passive optical components
- BS-EN-62005-2 - Reliability of fibre optic interconnecting devices and passive optical components
- BS-EN-62005-3 - Reliability of fibre optic interconnecting devices and passive optical components
- BS-EN-62099 - Fibre optic wavelength switches. Generic specification
- BS-EN-62134-1 - Fibre optic interconnecting devices and passive components. Fibre optic closures
- BS-EN-62148-17 - Fibre optic active components and devices. Package and interface standards
- BS-EN-62343 - Dynamic modules - General and guidance
- BS-EN-62343-1 - Dynamic modules
- BS-EN-62343-1-3 - Dynamic modules
- BS-EN-62343-3-2 - Dynamic modules
- BS-EN-62343-5-1 - Dynamic modules
- BS-EN-62343-TC - Tracked Changes. Dynamic modules - General and guidance
- BS-EN-62802 - Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) systems
- BS-EN-IEC-60794-1-31 - Optical fibre cables
- BS-EN-IEC-61300-3-4 - Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
- BS-EN-IEC-61300-3-4-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
- BS-EN-IEC-61753-051-02 - Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-IEC-61753-051-02-TC - Tracked Changes. Fibre optic interconnecting devices and passive components. Performance standard
- BS-EN-IEC-61757 - Fibre optic sensors. Generic specification
- BS-EN-IEC-61757-1-1 - Fibre optic sensors
- BS-EN-IEC-61757-2-1 - Fibre optic sensors
- BS-EN-IEC-61757-3-2 - Fibre optic sensors
- BS-EN-IEC-61757-4-3 - Fibre optic sensors
- BS-EN-IEC-61757-6-1 - Fibre optic sensors
- BS-EN-IEC-61757-7-3 - Fibre optic sensors
- BS-EN-IEC-61757-TC - Tracked Changes. Fibre optic sensors. Generic specification
- BS-EN-IEC-62148-17-TC - Tracked Changes. Fibre optic active components and devices. Package and interface standards.Transmitter and receiver components with dual coaxial RF connectors.
- BS-EN-IEC-62149-10 - Fibre optic active components and devices - Performance standards
- BS-EN-IEC-62343 - Dynamic modules. Generic specification
- BS-EN-IEC-62343-1 - Dynamic modules
- BS-EN-IEC-62343-3-4 - Dynamic modules
- BS-EN-IEC-62343-5-2 - Dynamic modules
- BS-EN-IEC-62343-TC - Tracked Changes. Dynamic modules. Generic specification
- PD-CLC-50510 - Fibre optic access to end-user. A guideline to building of FTTX fibre optic network
- PD-IEC-62343-6-10 - Dynamic modules
- PD-IEC-62343-6-3 - Dynamic modules
- PD-IEC-62343-6-4 - Dynamic modules
- PD-IEC-62343-6-7 - Dynamic modules
- PD-IEC-62343-6-9 - Dynamic modules
- PD-IEC-62658 - Roadmap of optical circuit boards and their related packaging technologies
- PD-IEC-62661-2-1 - Optical backplanes. Product specification
- PD-IEC-63072-1 - Photonic integrated circuits
- PD-IEC-63098-1 - Transmitting equipment for radiocommunication. Radio-over-fibre technologies and their performance standard
- PD-IEC-63099-1 - Transmitting equipment for radiocommunication. Radio-over-fibre technologies for electromagnetic-field measurement
- PD-IEC-63099-2 - Transmitting equipment for radiocommunication. Radio-over-fibre technologies for electromagnetic-field measurement
- PD-IEC/PAS-62129 - Calibration of optical spectrum analyzers
IEC:
- IEC-60794-1-31-RL - Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
- IEC-61757 - Fibre optic sensors - Generic specification
- IEC-61757-1 - Fibre optic sensors - Part 1: Generic specification
- IEC-61757-1-1 - Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings
- IEC-61757-1-1-RL - Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings
- IEC-61757-1-2 - Fibre optic sensors - Part 1-2: Strain measurement - Distributed sensing based on Brillouin scattering
- IEC-61757-2-1 - Fibre optic sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings
- IEC-61757-2-2 - Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing
- IEC-61757-3-2 - Fibre optic sensors - Part 3-2: Acoustic sensing and vibration measurement - Distributed sensing
- IEC-61757-4-3 - Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method
- IEC-61757-5-1 - Fibre optic sensors - Part 5-1: Tilt measurement - Tilt sensors based on fibre Bragg gratings
- IEC-61757-7-3 - Fibre optic sensors - Part 7-3: Voltage measurement - Polarimetric method
- IEC-62134-1 - Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification
- IEC-62148-17 - Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
- IEC-62149-10 - Fibre optic active components and devices - Performance standards - Part 10: Radio-over-fibre (RoF) transceivers for mobile fronthaul
- IEC-62343 - Dynamic modules - Generic specification
- IEC-62343-1 - Dynamic modules - Part 1: Performance standards - General conditions
- IEC-62343-1-3 - Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
- IEC-62343-3-2 - Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor
- IEC-62343-5-1 - Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
- IEC-62343-6-10 - Dynamic modules - Part 6-10: Design guide - Intermediate controller for multiple dynamic module systems
- IEC-62343-6-4 - Dynamic modules - Part 6-4: Design guides - Reconfigurable optical add/drop multiplexer
- IEC-62343-6-7 - Dynamic modules - Part 6-7: Design guide - Optical channel monitor
- IEC-62343-6-9 - Dynamic modules - Part 6-9: Design Guides - Transient crosstalk measurement results on wavelength selective switch
- IEC-62343-RL - Dynamic modules - Generic specification
- IEC-62658 - Roadmap of optical circuit boards and their related packaging technologies
- IEC-62661-2-1 - Optical backplanes - Product specification - Part 2-1: Optical backplane using optical fibre circuit boards and multi-core right angle optical connectors
- IEC-62801 - Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulator in wireless communication and broadcasting systems
- IEC-62802 - Measurement method of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulator in high-frequency radio on fibre (RoF) systems
- IEC-63072-1 - Photonic integrated circuits - Part 1: Introduction and roadmap for standardization
- IEC-63099-1 - Transmitting equipment for radiocommunication - Radio-over fibre technologies for electromagnetic-field measurement - Part 1: Radio-over-fibre technologies for antenna measurement
- IEC-63099-2 - Transmitting equipment for radiocommunication - Radio-over-fibre technologies for electromagnetic-field measurement - Part 2: Radio-over-fibre technologies for electric-field sensing
Other SDOs:
- EN-50411-3-8 - Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C
- EN-50411-4-1 - Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 4-1: Passive optical street cabinet for category A
- EN-61757-1 - Fibre optic sensors - Part 1: Generic specification
- EN-61757-1-1 - Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings
- EN-61757-2-2 - Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing
- EN-61977 - Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification
- EN-62134-1 - Part 1: Generic Specification, Fibre Optic Interconnecting Devices & Passive Component
- EN-62148-17 - Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
- EN-62343 - Dynamic modules - General and guidance
- EN-62343-1 - Dynamic modules - Part 1: Performance standards - General conditions
- EN-62343-1-3 - Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
- EN-62343-3-2 - Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor
- EN-62343-5-1 - Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
- EN-62802 - Measurement methods of a half-wavelength voltage and a chirp parameter for Mach-Zehnder optical modulators in high-frequency radio on fibre (RoF) systems
- EN-IEC-60794-1-31 - Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
- EN-IEC-62343-1 - Dynamic modules - Part 1: Performance standards - General conditions (IEC 62343-1:2019)