Document Center List of Standards on Physical Layer
ICS Code 35.100.10
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-E2158 - Standard Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 928 MHz Band (Withdrawn 2010)
- ASTM-E2213 - Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications
BSI:
- BS-7112 - Procedures for achievement of interoperability and security by use of encipherment at the physical layer of OSI in telecommunication systems conveying automatic data processing information
- BS-EN-13757-2 - Communication systems for meters
- BS-EN-13757-2-TC - Tracked Changes. Communication systems for meters
- BS-EN-13757-4 - Communication systems for meters
- BS-EN-13757-5 - Communication systems for meters
- BS-EN-13757-6 - Communication systems for meters
- BS-EN-13757-7 - Communication systems for meters
- BS-EN-16836-1 - Communication systems for meters. Wireless mesh networking for meter data exchange
- BS-EN-16836-2 - Communication systems for meters. Wireless mesh networking for meter data exchange
- BS-EN-60728-7-1 - Cable networks for television signals, sound signals and interactive services
- BS-EN-61158-2 - Industrial communication networks. Fieldbus specifications
- BS-EN-62056-42 - Electricity metering. Data exchange for meter reading, tariff and load control
- BS-EN-62943 - Visible light beacon system for multimedia applications
- BS-ISO-11783-2 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO/IEC-10022 - Information technology. Open systems interconnection. Physical service definition
- DD-238-2 - Fieldbus, Specification for 31.25 Kbits/S Physical Layer Profile
IEC:
- IEC-60728-7-1 - Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant status monitoring - Physical (PHY) layer specification
- IEC-60728-7-1-AM1 - Amendment 1 - Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant status monitoring - Physical (PHY) Layer Specification
- IEC-62055-51 - Electricity metering - Payment systems - Part 51: Standard transfer specification (STS) - Physical layer protocol for one-way numeric and magnetic card token carriers
- IEC-62056-42 - Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange
- IEC-62943 - Visible light beacon system for multimedia applications
ISO:
- ISO-2110 - Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments
- ISO-2110-1 - Interface connector and contact number assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s per second
- ISO-4902 - Information technology - Data communication - 37-pole DTE/DCE interface connector and contact number assignments
- ISO-4903 - Information technology - Data communication - 15-pole DTE/DCE interface connector and contact number assignments
- ISO-8877 - Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
- ISO-9160 - Information processing - Data encipherment - Physical layer interoperability requirements
- ISO-9543 - Information processing systems - Information exchange between systems - Synchronous transmission signal quality at DTE/DCE interfaces
- ISO-9578 - Information technology - Communication interface connectors used in local area networks
- ISO/IEC-10022 - Information technology - Open Systems Interconnection - Physical Service Definition
- ISO/IEC-10173 - Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T
- ISO/IEC-11518-1 - Information technology - High-Performance Parallel Interface - Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
- ISO/IEC-11518-3 - Information technology - High-Performance Parallel Interface - Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE)
- ISO/IEC-11569 - Information technology - Telecommunications and information exchange between systems - 26-pole interface connector mateability dimensions and contact number assignments
- ISO/IEC-13575 - Information technology - Telecommunications and information exchange between systems - 50-pole interface connector mateability dimensions and contact number assignments
- ISO/IEC-13642 - Information technology -- Elements of management information related to the OSI Physical Layer
- ISO/IEC-15294 - Information technology - Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
- ISO/IEC-16353 - Information technology - Telecommunications and information exchange between systems - Front-end configuration command for NFC-WI (NFC-FEC)
- ISO/IEC-17982 - Information technology - Telecommunications and information exchange between systems - Close capacitive coupling communication physical layer (CCCC PHY)
- ISO/IEC-18057 - Information technology - Telecommunications and information exchange between systems - Using ECMA-323 (CSTA XML) in a Voice Browser Environment
- ISO/IEC-18092 - Information technology - Telecommunications and information exchange between systems - Near Field Communication - Interface and Protocol (NFCIP-1)
- ISO/IEC-19369 - Information technology - Telecommunications and information exchange between systems - NFCIP-2 test methods
- ISO/IEC-20002 - Information technology - Telecommunications and information exchange between systems - Managed P2P: Framework
- ISO/IEC-22512 - Information technology - Telecommunications and information exchange between systems - Guidelines for the implementation of ISO/IEC 17982:2012
- ISO/IEC-23917 - Information technology - Telecommunications and information exchange between systems - NFCIP-1 - Protocol Test Methods
- ISO/IEC-2593 - Information technology -- Telecommunications and information exchange between systems -- 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
- ISO/IEC-28361 - Information technology - Telecommunications and information exchange between systems - Near Field Communication Wired Interface (NFC-WI)
- ISO/IEC-4005-2 - Telecommunications and information exchange between systems - Unmanned aircraft area network (UAAN) - Part 2: Physical and data link protocols for shared communication
- ISO/IEC-4005-3 - Telecommunications and information exchange between systems - Unmanned aircraft area network (UAAN) - Part 3: Physical and data link protocols for control communication
- ISO/IEC-4005-4 - Telecommunications and information exchange between systems - Unmanned aircraft area network (UAAN) - Part 4: Physical and data link protocols for video communication
- ISO/IEC-7480 - Information technology - Telecommunications and information exchange between systems - Start-stop transmission signal quality at DTE/DCE interfaces
- ISO/IEC-8480 - Information technology - Telecommunications and information exchange between systems - DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
- ISO/IEC-8481 - Information technology - Telecommunications and information exchange between systems - DTE to DTE direct connections
- ISO/IEC-8482 - Information technology - Telecommunications and information exchange between systems - Twisted pair multipoint interconnections
- ISO/IEC-9314-20 - Information technology - Fibre Distributed Data Interface (FDDI) - - Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
- ISO/IEC-9314-5 - Information technology - Fibre Distributed Data Interface (FDDI) - Part 5: Hybrid Ring Control (HRC)
- ISO/IEC-9549 - Information technology - Galvanic isolation of balanced interchange circuit
Other SDOs:
- DIN-EN-13757-4 - Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands)
- EN-13757-4 - Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands)
- EN-13757-5 - Communication systems for meters - Part 5: Wireless M-Bus relaying
- EN-13757-6 - Communication systems for meters - Part 6: Local Bus
- EN-13757-7 - Communication systems for meters - Part 7: Transport and security services
- EN-16836-1 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework
- EN-16836-2 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification
- EN-60728-7-1 - Cable networks for television signals, sound signals and interactive services - Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring - Physical (PHY) Layer Specification
- EN-62943 - Visible light beacon system for multimedia applications
- SS-EN-13757-2 - Communication systems for meters - Part 2: Wired M-Bus communication
- SS-EN-13757-3 - Communication systems for meters - Part 3: Application protocols
- SS-EN-13757-4 - Communication systems for meters - Part 4: Wireless M-Bus communication
- SS-EN-13757-5 - Communication systems for meters - Part 5: Wireless M-Bus relaying
- SS-EN-13757-6 - Communication systems for meters - Part 6: Local Bus
- SS-EN-13757-7 - Communication systems for meters - Part 7: Transport and security services
- SS-EN-1434-3 - Heat meters - Part 3: Data exchange and interfaces
- SS-EN-16836-1 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework
- SS-EN-16836-2 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification
- SS-EN-28877 - Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T (ISO/IEC 8877:1992)
- SS-EN-29314-1 - Information processing systems - Fibre distributed data interface (FDDI) - Part 1: Token ring physical layer protocol (PHY) (ISO 9314-1:1989)
- SS-EN-29314-2 - Information processing systems - Fibre distributed data interface (FDDI) - Part 2: Token ring mediaaccess control (MAC) (ISO 9314-2:1989)
- SS-EN-29318-2 - Information technology - Intelligent peripheral interface - Part 2: Device specific command set formagnetic disk drives (ISO/IEC 9318-2:1990)
- SS-EN-29318-3 - Information technology - Intelligent peripheral interface - Part 3: Device generic command set for magnetic and optical disk drives (ISO/IEC 9318-3:1990)
- SS-EN-29318-4 - Information technology - Intelligent peripheral interface - Part 4: Device generic command set for magnetic tape drives (ISO/IEC 9318-4:1990)
- SS-EN-ISO/IEC-9314-3 - Information processing systems - Fibre Distributed Data Interface (FDDI) - Part 3:Physical Layer Medium Dependent (PMD) (ISO/IEC 9314-3:1990)
- SS-ISO-10022 - Information technology - Open Systems Interconnection - Physical Service Definition
- SS-ISO-11569 - Information technology - Telecommunications and information exchange between systems - 26-pole interface connector mateability dimensions and contactnumber assignments
- SS-ISO-2110 - Information technology - Data communication - 25-pole DTE/DCE interface connector and contact number assignments
- SS-ISO-2593 - Information technology - Telecommunications and information exchange between systems - 34-pole DTE/DCE interface connector mateability dimensions andconnect number assignments
- SS-ISO-7480 - Information technology - Telecommunications and information exchange between systems - Start-stop transmission signal quality at DTE/DCE interfaces
- SS-ISO-8480 - Information processing - Data communication - DTE/DCE interface back-up control operation using the25-pole connector
- SS-ISO-8481 - Data communication - DTE to DTE physical connection using X.24 interchange circuits with DTE provided timing
- SS-ISO-8482 - Information technology - Telecommunications and information exchange between systems - Twisted pairmultipoint interconnections
- SS-ISO-8877 - Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN basic access interface located at reference points S and T
- SS-ISO-9067 - Information processing systems - Data communication - Automatic fault isolation procedures using test loops
- SS-ISO-9314-1 - Information processing systems - Fibre Distributed Data Interface (FDDI) - Part 1: Token Ring Physical Layer Protocol (PHY)
- SS-ISO-9314-2 - Information processing systems - Fibre Distributed Data Interface (FDDI) - Part 2: Token Ring MediaAccess Control (MAC)
- SS-ISO-9314-3 - Information processing systems - Fibre Distributed Data Interface (FDDI) - Part 3: Physical Layer Medium Dependent (PMD)
- SS-ISO-9318-2 - Information technology - Intelligent Peripheral Interface - Part 2: Device specific command set formagnetic disk drives
- SS-ISO-9318-3 - Information technology - Intelligent Peripheral Interface - Part 3: Device generic command set for magnetic and optical disk drives
- SS-ISO-9318-4 - Information technology - Intelligent Peripheral Interface - Part 4: Device generic command set for magnetic tape drives
- SS-ISO-9543 - Information processing systems - Information exchange between systems - Synchronous transmission signal quality at DTE/DCE interfaces
- SS-ISO-9549 - Information technology - Galvanic isolation of balanced interchange circuits
- SS-ISO/IEC-11518-1 - Information technology - High-Performance Parallel Interface - Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
- SS-ISO/IEC-11518-2 - Information technology - High-Performance Parallel Interface - Part 2: Framing Protocol (HIPPI-FP)
- SS-ISO/IEC-11518-3 - Information technology - High-Performance Parallel Interface - Part 3: Encapsulation of ISO 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE)
- SS-ISO/IEC-11518-6 - Information technology - High-Performance Parallel Interface - Part 6: Physical Switch Control (HIPPI-SC)
- SS-ISO/IEC-8480 - Information technology - Telecommunications and information exchange between systems - DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchangecircuits
- SS-ISO/IEC-9314-5 - Information technology - Fibre Distributed Data Interface (FDDI) - Part 5:Hybrid Ring Control (HRC)
- UNE-EN-16836-1 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 1: Introduction and standardization framework
- UNE-EN-16836-2 - Communication systems for meters - Wireless mesh networking for meter data exchange - Part 2: Networking layer and stack specification