Document Center List of Standards on It Applications In Other Fields Including E-Learning
ICS Code 35.240.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D7443 - Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents (Withdrawn 2013)
- ASTM-D7534 - Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit (Withdrawn 2013)
- ASTM-D7627 - Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine (Withdrawn 2013)
- ASTM-D7628 - Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas (Withdrawn 2013)
- ASTM-D7629 - Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features (Withdrawn 2013)
- ASTM-D7630 - Standard Practice for Minimum Geospatial Data for Postmining Land Uses (Withdrawn 2013)
- ASTM-D7631 - Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location (Withdrawn 2013)
- ASTM-D7699 - Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
- ASTM-D7780 - Standard Practice for Minimum Geospatial Data for Representing Coal Mining Features
- ASTM-E1947 - Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data
- ASTM-E1948 - Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data
- ASTM-E2077 - Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data
- ASTM-E2078 - Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data
- ASTM-E2152 - Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
- ASTM-E2153 - Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
- ASTM-E2842 - Standard Guide for Credentialing for Access to an Incident or Event Site
- ASTM-E3016 - Standard Guide for Establishing Confidence in Digital and Multimedia Evidence Forensic Results by Error Mitigation Analysis
BSI:
- BS-7988 - Code of practice for the use of information technology (IT) in the delivery of assessments
- BS-8426 - A code of practice for e-support in e-learning systems
- BS-8581-1 - Exchanging course related information
- BS-8581-2 - Exchanging course related information
- BS-EN-13321-1 - Open data communication in building automation, controls and building management. Home and building electronic system
- BS-EN-13321-2 - Open Data Communication in Building Automation, Controls and Building Management. Home and Building Electronic Systems
- BS-EN-13757-1-TC - Tracked Changes. Communication systems for meters
- BS-EN-13757-2-TC - Tracked Changes. Communication systems for meters
- BS-EN-14908-1 - Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol
- BS-EN-14908-2 - Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol
- BS-EN-14908-3 - Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol
- BS-EN-14908-4 - Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol
- BS-EN-14908-5 - Open data communication in building automation, controls and building management implementation guideline. Control network protocol
- BS-EN-14908-6 - Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol
- BS-EN-14968 - Semantics for groundwater data interchange
- BS-EN-15232 - Energy performance of buildings. Impact of Building Automation, Controls and Building Management
- BS-EN-15518-1 - Winter maintenance equipment. Road weather information systems
- BS-EN-15518-2 - Winter maintenance equipment. Road weather information systems
- BS-EN-15518-3 - Winter maintenance equipment. Road weather information systems
- BS-EN-15518-3-TC - Tracked Changes. Winter maintenance equipment. Road weather information systems
- BS-EN-15942 - Sustainability of construction works. Environmental product declarations. Communication format business-to-business
- BS-EN-15943 - Curriculum exchange format (CEF). Data model
- BS-EN-15981 - European Learner Mobility. Achievement information (EuroLMAI)
- BS-EN-15982 - Metadata for learning opportunities (MLO). Advertising
- BS-EN-16425 - Simple Publishing Interface
- BS-EN-16590-1 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-EN-16590-2 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-EN-16590-3 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-EN-16590-4 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-EN-16603-31-04 - Space engineering. Exchange of thermal analysis data
- BS-EN-16604-30-03 - Space. Space Situational Awareness Monitoring
- BS-EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG). Interoperability between Tyre Information Systems (TIS) and TPG. Interfaces and Requirements
- BS-EN-16831 - Tractors and machinery for agriculture and forestry. Safety. Format for reporting accidents
- BS-EN-17367 - Waste Management. Data communication between communication management system and the back office system for stationary waste collection containers. Functional specification and the semantic data model
- BS-EN-17531 - Reporting in support of supervision of online gambling services by the gambling regulatory authorities of the Member States
- BS-EN-419241-1 - Trustworthy Systems Supporting Server Signing
- BS-EN-419241-1-TC - Tracked Changes. Trustworthy Systems Supporting Server Signing
- BS-EN-50090-4-3 - Home and Building Electronic Systems (HBES)
- BS-EN-50667 - Information technology. Automated infrastructure management (AIM) systems. Requirements, data exchange and applications
- BS-EN-60987 - Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
- BS-EN-61937-10 - Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958
- BS-EN-62106 - Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz
- BS-EN-62227 - Multimedia home server systems. Digital rights permission code
- BS-EN-62298-1 - Teleweb application
- BS-EN-62298-2 - Teleweb application
- BS-EN-62298-3 - Teleweb application
- BS-EN-62298-4 - TeleWeb application
- BS-EN-62698 - Multimedia home server systems. Rights information interoperability for IPTV
- BS-EN-62827-1 - Wireless Power Transfer. Management
- BS-EN-ISO-16484-1 - Building automation and control systems (BACS)
- BS-EN-ISO-16484-3 - Building automation and control systems (BACS)
- BS-EN-ISO-16484-5 - Building automation and control systems (BACS)
- BS-EN-ISO-16484-6 - Building automation and control systems (BACS)
- BS-EN-ISO-20380 - Public swimming pools. Computer vision systems for the detection of drowning accidents in swimming pools. Safety requirements and test methods
- BS-EN-ISO-22311 - Societal security. Video-surveillance. Export interoperability
- BS-EN-ISO-22739 - Blockchain and distributed ledger technologies. Vocabulary
- BS-EN-ISO-25119-1 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-EN-ISO-25119-3 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-EN-ISO-25119-4 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-EN-ISO-9241-151 - Ergonomics of human-system interaction
- BS-EN-ISO/IEC19788-1 - Information technology. Learning, education and training. Metadata for learning resources
- BS-EN-ISO/IEC19788-2 - Information technology. Learning, education and training. Metadata for learning resources
- BS-EN-ISO/IEC19788-3 - Information technology. Learning, education and training. Metadata for learning resources
- BS-EN-ISO/IEC19788-5 - Information technology. Learning, education and training. Metadata for learning resources
- BS-EN-ISO/IEC19796-1 - Information technology. Learning, education and training. Quality management, assurance and metrics
- BS-EN-ISO/IEC-27019 - Information technology. Security techniques. Information security controls for the energy utility industry
- BS-ISO-11783-1 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-10 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-10-TC - Tracked Changes. Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-11 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-12 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-13 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-13-TC - Tracked Changes. Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-1-TC - Tracked Changes. Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-2 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-3 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-3-TC - Tracked Changes. Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-4 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-5 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-6 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-6-TC - Tracked Changes. Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-7 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-7-TC - Tracked Changes. Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11783-9 - Tractors and machinery for agriculture and forestry. Serial control and communications data network
- BS-ISO-11788-3 - Electronic data interchange between information systems in agriculture. Agricultural data element dictionary
- BS-ISO-12188-1 - Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agriculture
- BS-ISO-12188-2 - Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agriculture
- BS-ISO-13374-2 - Condition monitoring and diagnostics of machines. Data processing, communication and presentation
- BS-ISO-13374-3 - Condition monitoring and diagnostics of machines. Data processing, communication and presentation
- BS-ISO-13374-4 - Condition monitoring and diagnostics of machine systems. Data processing, communication and presentation
- BS-ISO-14223-1 - Radiofrequency identification of animals. Advanced transponders
- BS-ISO-14223-2 - Radiofrequency identification of animals. Advanced transponders
- BS-ISO-14223-3 - Radiofrequency identification of animals. Advanced transponders
- BS-ISO-14452 - Network services billing. Requirements
- BS-ISO-17532 - Stationary equipment for agriculture. Data communications network for livestock farming
- BS-ISO-18831 - Clothing. Digital fittings. Attributes of virtual garments
- BS-ISO-20112-1 - Tractors and machinery for agriculture and forestry. Camera interface between tractor and implement
- BS-ISO-23257 - Blockchain and distributed ledger technologies. Reference architecture
- BS-ISO-23355 - Visibility data interchange among logistics information service providers
- BS-ISO-23725 - Autonomous system and fleet management system interoperability
- BS-ISO-25119-1 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems.
- BS-ISO-25119-2 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-ISO-25119-3 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-ISO-25119-4 - Tractors and machinery for agriculture and forestry. Safety-related parts of control systems
- BS-ISO-29481-1 - Building information models. Information delivery manual. Methodology and format
- BS-ISO-29481-2 - Building information models. Information delivery manual. Interaction framework
- BS-ISO-9241-820 - Ergonomics of human-system interaction
- BS-ISO/IEC-12785-1 - Information technology. Learning, education, and training. Content packaging
- BS-ISO/IEC-12785-2 - Information technology. Learning, education, and training. Content packaging
- BS-ISO/IEC-12785-3 - Information technology. Learning, education, and training. Content packaging. Best practice and implementation guide
- BS-ISO/IEC-14543-5-12 - Information technology. Home electronic system (HES) architecture
- BS-ISO/IEC-14543-5-9 - Information technology. Home electronic systems (HES) architecture
- BS-ISO/IEC-15045-3-2 - Information technology. Home Electronic System (HES) gateway
- BS-ISO/IEC-17917 - Smart cities. Guidance to establishing a decision-making framework for sharing data and information services
- BS-ISO/IEC-17917-TC - Tracked Changes. Smart cities. Guidance to establishing a decision-making framework for sharing data and information services
- BS-ISO/IEC-19778-1 - Information technology. Learning, education and training. Collaborative technology. Collaborative workplace
- BS-ISO/IEC-19778-2 - Information technology. Learning, education and training. Collaborative technology. Collaborative workplace
- BS-ISO/IEC-19778-3 - Information technology. Learning, education and training. Collaborative technology. Collaborative workplace
- BS-ISO/IEC-19780-1 - Information technology. Learning, education and training. Collaborative technology. Collaborative learning communication
- BS-ISO/IEC-19781-1 - Part 1: Registry Content, Information Technology, Learning, Education & Training, Reg
- BS-ISO/IEC-19781-2 - Part 2: Registration Authority Process, Information Technology, Learning, Education &
- BS-ISO/IEC-19796-1 - Information Technology, Learning, Education & Training, Quality Manage Ment, Assurance
- BS-ISO/IEC-20006-1 - Information technology for learning, education and training. Information model for competency
- BS-ISO/IEC-20006-2 - Information technology for learning, education and training. Information model for competency
- BS-ISO/IEC-21972 - Information technology. Upper level ontology for smart city indicators
- BS-ISO/IEC-23988 - Information technology. A code of practice for the use of information technology (IT) in the delivery of assessments
- BS-ISO/IEC-24039 - Information technology. Smart city digital platform reference architecture. Data and service
- BS-ISO/IEC-24703 - Information technology. Participant identifiers
- BS-ISO/IEC-24751-1 - Information technology. Individualized adaptability and accessibility in e-learning, education and training
- BS-ISO/IEC-24751-2 - Information technology. Individualized adaptability and accessibility in e-learning, education and training
- BS-ISO/IEC-24751-3 - Information technology. Individualized adaptability and accessibility in e-learning, education and training
- BS-ISO/IEC-27019 - Information technology. Security techniques. Information security controls for the energy utility industry
- BS-ISO/IEC-30145-2 - Information technology. Smart City ICT reference framework
- BS-ISO/IEC-30145-3 - Information technology. Smart City ICT reference framework
- BS-ISO/IEC-30146 - Information technology. Smart city ICT indicators
- BS-ISO/IEC-30182 - Smart city concept model. Guidance for establishing a model for data interoperability
- BS-ISO/IEC-40180 - Information technology. Quality for learning, education and training. Fundamentals and reference framework
- BS-ISO/IEC-5087-2 - Information technology. City data model
- BS-ISO/IEC-5153-1 - Information technology. City service platform for public health emergencies
- CWA-14515 - Model of Different Categories of Furniture & Types of Products Created To Build a Port
- CWA-14643 - Internationalization of the IEEE Learning Object Metadata
- CWA-14645 - Availability of Alternative Language Versions of a Learning Resource in IEEE Lom
- CWA-14661 - Guidelines To Standardizers of Ict Products & Services in the CEN Ict Domain
- CWA-14871 - Controlled Vocabularies for Learning Object Metadata, Typology, Impact Analysis, Guide
- CWA-14921 - Web Services, Technology & Standardization Aspects
- CWA-14928 - Review of Sif Infrastructure, Architecture, Message Processing & Transport Layer
- CWA-14929 - Internationalization of Sif & Harmonization With Other Specs/Standards
- CWA-14946 - European Econstruction Framework (Eef), Context & Scope for Econstruction
- CWA-14947 - European Econstruction Architecture (Eea), Blueprint for an Ict System in Constructio
- CWA-15141 - European Econstruction Meta-Schema (Eem)
- CWA-15155 - Adaptation of Sif (Schools Interoperability Framework) Data Model for a European Cont
- CWA-15244 - Guidance Information for the Deployment of Dublin Core Metadata
- CWA-15245 - EU E-Government Metadata Framework
- CWA-15246 - Guidance for the Deployment of the EU E-Government Metadata Framework
- CWA-15247 - Guidance Information for the Deployment of Dublin Core Metadata in Corporate Environme
- CWA-15248 - Guidelines for Machine-Processable Representation of Dublin Core Application Profiles
- CWA-15249 - Guidance Information for Naming, Versioning, Evolution & Maintenance of Element Declar
- CWA-15454 - Simple Query Interface Specification for Learning Repositories
- CWA-15455 - European Model for Learner Competencies
- CWA-15533 - Model for the Classification of Quality Approaches in E Learning
- CWA-15554 - Specifications for a Web Accessibility Conformity Assessment Scheme & a Web Accessibil
- CWA-15555 - Guidelines & Support for Building Application Profiles in E-Learning
- CWA-15574 - Commission Recommendation 1994/820/EC October 1994, Proposed Revision With the Require
- CWA-15575 - List of Invoice Content Details Identified in the Directive 2001/115/EC Expressed As
- CWA-15576 - Recommendation To Allow Coded Identifiers as an Alternative To the Current Unstructur
- CWA-15577 - Standardized Set of Codes With Definitions To Replace Plain Text Clauses in Invoice M
- CWA-15578 - Survey of Vat Data Element Usage in the Member States & Theuse of Codes for Vat Exemp
- CWA-15579 - E-Invoices & Digital Signatures
- CWA-15580 - Storage of Electronic Invoices
- CWA-15581 - Guidelines for Invoicing Service Providers
- CWA-15582 - Invoice Reference Model for EU Vat Purposes Specification
- CWA-15660 - Providing Good Practice for E-Learning Quality Approaches
- CWA-15661 - Providing E-Learning Supplies Transparency Profiles
- CWA-15893-1 - European E-Competence Framework, the Framework, Version 1.0
- CWA-15893-2 - European E-Competence Framework, User Guidelines, Version 1.0
- CWA-15966 - Guidelines & Recommendations for Building Metadata Application Profiles for Agricultur
- CWA-15971-1 - Part 1: Introduction & Overview, Discovery of & Access To Egovernment Resources
- CWA-15971-2 - Part 2: Reference Ontology & Metadata Schema, Discovery of & Access To Egovernment Res
- CWA-15971-3 - Part 3: Protocol for the Syndication of Semantic Descriptors (Sdshare), Discovery of &
- CWA-15971-4 - Part 4: Federated Terminological Resources, Discovery of & Access To Egovernment Resou
- CWA-15971-5 - Part 5: Establishment of a Set of Soft Cultural Elements, Discovery of & Access To Ego
- CWA-15971-6 - Evaluation & Recommendations, Discovery of & Access To Egovernment Resources
- CWA-16052 - ICT certification in Europe
- CWA-16052-2 - ICT Certification in Europe. ICT Certification in Action
- CWA-16053 - Interoperability of European E-Career Services
- CWA-16076 - Ects Information Package/Course Catalogue Mlo Application
- CWA-16077 - Educational Credit Information Model
- CWA-16078 - Curriculum Exchange Format
- CWA-16131 - Europass Diploma Supplement Application Profile of the Eurolmai (Eurolmai Europass Dsa
- CWA-16132 - European Learner Mobility Achievement Information (Eurolmai)
- CWA-16133 - Guidelines on a European Learner Mobility Model
- CWA-16385 - Interoperability of Registries
- DD-CEN-14014 - Postal services. Hybrid mail. XML definition of encapsulation of letters for automated postal handling
- DD-CEN-15231 - Open data communication in building automation, controls and building management. Mapping between Lonworks and BACnet
- DD-ENV-13154-1 - Data communication for HVAC application field net
- DD-ENV-13154-2 - Data Communication for Hvac Application Field Net, Protocols
- DD-ENV-13282 - Hydraulic road binders. Composition, specifications and conformity criteria
- DD-ENV-13321-1 - Data communication for HVAC application automation net. BACnet, Profibus, World FIP
- DD-ENV-13321-2 - Data communication for HVAC application automation net
- DD-IEC-62224 - Multimedia home server systems. Conceptual model for digital rights management
- PAS-256 - Buried assets. Capturing, recording, maintaining and sharing of location information and data. Code of practice
- PD-6631 - Technical guide to ISO/IEC 13522-5:1997. Information technology. Coding of multimedia and hypermedia information. Support for base-level interactive applications (MHEG-5)
- PD-CEN-14014 - Postal services. Hybrid mail. XML definition of encapsulation of letters for automated postal handling
- PD-CEN-15232-2 - Energy performance of buildings
- PD-CEN-15518-4 - Winter maintenance equipment. Road weather information systems
- PD-CEN-15518-4-TC - Tracked Changes. Winter maintenance equipment. Road weather information systems
- PD-CEN-16316 - Postal services. Open interface. Sortplan
- PD-CEN-16919 - Postal services. Interface and data transfer format for capturing postal automation events IDT-PAE
- PD-CEN-17167 - Communication system for meters. Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information
- PD-CEN-17167-TC - Tracked Changes. Communication system for meters. Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information
- PD-CEN-18053-1 - Digital Chain of Custody for CBRNE Evidence
- PD-CEN-18053-2 - Digital Chain of Custody for CBRNE Evidence
- PD-CEN-419241 - Security Requirements for Trustworthy Systems Supporting Server Signing
- PD-CEN/CLC-17602-80-01 - Space product assurance. Reuse of existing software
- PD-CEN/CLC-17602-80-03 - Space product assurance. Software dependability and safety
- PD-CEN/CLC-17602-80-04 - Space product assurance. Software metrication programme definition and implementation
- PD-CEN/CLC-17602-80-11 - Space product assurance. Software process assessment and improvement
- PD-CEN/CLC-17602-80-12 - Space product assurance. Software process assessment and improvement
- PD-CEN-ISO-52120-2 - Energy performance of buildings. Contribution of building automation, controls and building management
- PD-CEN-ISO-52120-2-TC - Tracked Changes. Energy performance of buildings. Contribution of building automation, controls and building management
- PD-CLC-50134-9 - Alarm systems. Social alarm systems
- PD-CLC-50560 - Interoperability framework requirement specification
- PD-IEC-61361 - Electricity metering. Local and remote data exchange. Applications and performance
- PD-IEC-62056-41 - Electricity metering. Data exchange for meter reading, tariff and load control
- PD-IEC-62056-51 - Electricity metering. Data exchange for meter reading, tariff and load control. Application layer protocols
- PD-IEC-62056-52 - Electricity metering. Data exchange for meter reading, tariff and load control. Communication protocols management distribution line message specification (DLMS) server
- PD-IEC-62436 - Guideline for implementation of copy controlled multimedia interface
- PD-ISO-15143-3 - Earth-moving machinery and mobile road construction machinery. Worksite data exchange
- PD-ISO-16340 - Application of blockchain-based traceability platform for cold chain food
- PD-ISO-23244 - Blockchain and distributed ledger technologies. Privacy and personally identifiable information protection considerations
- PD-ISO-23249 - Blockchain and distributed ledger technologies. Overview of existing DLT systems for identity management
- PD-ISO-23455 - Blockchain and distributed ledger technologies. Overview of and interactions between smart contracts in blockchain and distributed ledger technology systems
- PD-ISO-23576 - Blockchain and distributed ledger technologies. Security management of digital asset custodians
- PD-ISO-23635 - Blockchain and distributed ledger technologies. Guidelines for governance
- PD-ISO-23644 - Blockchain and distributed ledger technologies (DLTs). Overview of trust anchors for DLT-based identity management
- PD-ISO-3736-1 - Digital fitting. Service process
- PD-ISO-3736-2 - Digital fitting. Service process
- PD-ISO-6277 - Blockchain and distributed ledger technologies. Data flow models for blockchain and DLT use cases
- PD-ISO/IEC-12785-3 - Information technology. Learning, education, and training. Content packaging
- PD-ISO/IEC-27019 - Information technology. Security techniques. Information security management guidelines based on ISO/IEC 27002 for process control systems specific to the energy utility industry
IEC:
- IEC-61937-10 - Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10: Non-linear PCM bitstreams according to the MPEG-4 audio lossless coding (ALS) format
- IEC-62106 - Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz
- IEC-62227 - Multimedia home server systems - Digital rights permission code
- IEC-62227-AM1 - Amendment 1 - Multimedia home server systems - Digital rights permission code
- IEC-62286 - Service diagnostic interface for consumer electronics products and networks - Implementation for IEEE 1394
- IEC-62298-1 - Teleweb application - Part 1: General description
- IEC-62298-2 - TeleWeb application - Part 2: Delivery methods
- IEC-62298-3 - Teleweb application - Part 3: Superteletext profile
- IEC-62298-4 - TeleWeb application - Part 4: Hyperteletext profile
- IEC-62330-1 - Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 - Part 1: VTR specifications
- IEC-62330-2 - Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 - Part 2: Compression format
- IEC-62330-3 - Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 - Part 3: Data stream format
- IEC-62436 - Guideline for implementation of copy controlled multimedia interface
- IEC-62436-AM1 - Amendment 1 - Guideline for implementation of copy controlled multimedia interface
- IEC-62455 - Internet protocol (IP) and transport stream (TS) based service access (TA1)
- IEC-62698 - Multimedia home server systems - Rights information interoperability for IPTV
- IEC-62827-1 - Wireless power transfer - Management - Part 1: Common components
- IEC-948 - Numeric keyboard for home electronic systems (HES)
ISO:
- ISO-11783-1 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 1: General standard for mobile data communication
- ISO-11783-10 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
- ISO-11783-11 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 11: Mobile data element dictionary
- ISO-11783-12 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 12: Diagnostics services
- ISO-11783-13 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 13: File server
- ISO-11783-14 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 14: Sequence control
- ISO-11783-2 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layer
- ISO-11783-2-1 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layerAmendment 1
- ISO-11783-3 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 3: Data link layer
- ISO-11783-4 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 4: Network layer
- ISO-11783-5 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5: Network management
- ISO-11783-6 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 6: Virtual terminal
- ISO-11783-7 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 7: Implement messages application layer
- ISO-11783-7-AM1 - - Amendment 1
- ISO-11783-8 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 8: Power train messages
- ISO-11783-9 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 9: Tractor ECU
- ISO-11788-1 - Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 1: General description
- ISO-11788-2 - Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 2: Dairy farming
- ISO-11788-3 - Electronic data interchange between information systems in agriculture -- Agricultural data element dictionary -- Part 3: Pig farming
- ISO-12188-1 - Tractors and machinery for agriculture and forestry - Test procedures for positioning and guidance systems in agriculture - Part 1: Dynamic testing of satellite-based positioning devices
- ISO-12188-2 - Tractors and machinery for agriculture and forestry - Test procedures for positioning and guidance systems in agriculture - Part 2: Testing of satellite-based auto-guidance systems during straight and level travel
- ISO-13374-1 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 1: General guidelines
- ISO-13374-2 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 2: Data processing
- ISO-13374-3 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 3: Communication
- ISO-13374-4 - Condition monitoring and diagnostics of machine systems - Data processing, communication and presentation - Part 4: Presentation
- ISO-14223-1 - Radiofrequency identification of animals - Advanced transponders - Part 1: Air interface
- ISO-14223-2 - Radiofrequency identification of animals - Advanced transponders - Part 2: Code and command structure
- ISO-14223-3 - Radiofrequency identification of animals - Advanced transponders - Part 3: Applications
- ISO-14452 - Network services billing - Requirements
- ISO-15143-1 - Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 1: System architecture
- ISO-15143-2 - Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 2: Data dictionary
- ISO-15143-3 - Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 3: Telematics data
- ISO-16340 - Application of blockchain-based traceability platform for cold chain food
- ISO-16484-5 - Building automation and control systems (BACS) - Part 5: Data communication protocol
- ISO-16484-5-1 - Building automation and control systems - Part 5: Data communication protocolAmendment 1
- ISO-17532 - Stationary equipment for agriculture - Data communications network for livestock farming
- ISO-18831 - Clothing - Digital fittings - Attributes of virtual garments
- ISO-20112-1 - Tractors and machinery for agriculture and forestry - Camera interface between tractor and implement - Part 1: Analogue camera interface
- ISO-20380 - Public swimming pools - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods
- ISO-21377 - Exchange formats for the audit data collection standard: XML and JSON
- ISO-22739 - Blockchain and distributed ledger technologies - Vocabulary
- ISO-23244 - Blockchain and distributed ledger technologies - Privacy and personally identifiable information protection considerations
- ISO-23249 - Blockchain and distributed ledger technologies . Overview of existing DLT systems for identity management
- ISO-23257 - Blockchain and distributed ledger technologies - Reference architecture
- ISO-23258 - Blockchain and distributed ledger technologies - Taxonomy and Ontology
- ISO-23355 - Visibility data interchange among logistics information service providers
- ISO-23455 - Blockchain and distributed ledger technologies - Overview of and interactions between smart contracts in blockchain and distributed ledger technology systems
- ISO-23576 - Blockchain and distributed ledger technologies - Security management of digital asset custodians
- ISO-23635 - Blockchain and distributed ledger technologies - Guidelines for governance
- ISO-23644 - Blockchain and distributed ledger technologies (DLTs) - Overview of trust anchors for DLT-based identity management
- ISO-23725 - Autonomous system and fleet management system interoperability
- ISO-24083 - Information and documentation - International archives statistics
- ISO-25119-1 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development
- ISO-25119-1-AM1 - - Amendment 1
- ISO-25119-2 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase
- ISO-25119-3 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software
- ISO-25119-3-AM1 - - Amendment 1: 1
- ISO-25119-4 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes
- ISO-25119-4-AM1 - - Amendment 1: 1
- ISO-3242 - Blockchain and distributed ledger technologies . Use cases
- ISO-3736-1 - Digital fitting - Service process - Part 1: Ready-to-wear clothing online and offline
- ISO-3736-2 - Digital fitting - Service process - Part 2: Customized clothing online and offline
- ISO-6039 - Blockchain and distributed ledger technologies - Identifiers of subjects and objects for the design of blockchain systems
- ISO-6277 - Blockchain and distributed ledger technologies - Data flow models for blockchain and DLT use cases
- ISO-9241-151 - Ergonomics of human-system interaction - Part 151: Guidance on World Wide Web user interfaces
- ISO-9241-820 - Ergonomics of human-system interaction - Part 820: Ergonomic guidance on interactions in immersive environments, including augmented reality and virtual reality
- ISO/IEC-10192-1 - Information technology - Home Electronic System (HES) interfaces - Part 1: Universal Interface (UI) Class 1
- ISO/IEC-10192-2 - Information technology - Home Electronic Systemes (HES) interfaces - Part 2: Simple Interfaces Type 1
- ISO/IEC-10192-3 - Information technology - Home electronic system (HES) interfaces - Part 3: Modular communications interface for energy management
- ISO/IEC-12785-1 - Information technology - Learning, education, and training - Content packaging - Part 1: Information model
- ISO/IEC-12785-2 - Information technology - Learning, education, and training - Content packaging - Part 2: XML binding
- ISO/IEC-12785-3 - Information technology - Learning, education, and training - Content packaging - Part 3: Best practice and implementation guide
- ISO/IEC-14543-4 - Information technology - Home Electronic System (HES) architecture - Part 4: Home and building automation in a mixed-use building
- ISO/IEC-14762 - Information technology - Functional safety requirements for Home and Building Electronic Systems (HBES)
- ISO/IEC-14908-1 - Information technology - Control network protocol - Part 1: Protocol stack
- ISO/IEC-14908-2 - Information technology - Control network protocol - Part 2: Twisted pair communication
- ISO/IEC-14908-3 - Information technology - Control network protocol - Part 3: Power line channel specification
- ISO/IEC-14908-4 - Information technology - Control network protocol - Part 4: IP communication
- ISO/IEC-15044 - Information technology -- Terminology for the Home Electronic System (HES)
- ISO/IEC-15045-1 - Information technology - Home Electronic Systems (HES) gateway - Part 1: A Residential Gateway model for HES
- ISO/IEC-15045-2 - Information technology - Home Electronic System (HES) gateway - Part 2: Modularity and protocol
- ISO/IEC-15045-3-1 - Information technology - Home Electronic System (HES) gateway - Part 3-1: Privacy, security, and safety - Introduction
- ISO/IEC-15045-3-2 - Information technology - Home Electronic System (HES) gateway - Part 3-2: Privacy, security, and safety - Privacy framework
- ISO/IEC-15067-2 - Information technology - Home Electronic Systems (HES) application model - Part 2: Lighting model for HES
- ISO/IEC-15067-3 - Information technology - Home Electronic System (HES) application model - Part 3: Model of an energy management system for HES
- ISO/IEC-15067-3-2 - Information technology - Home Electronic System (HES) application model - Part 3-2: GridWise interoperability context-setting framework
- ISO/IEC-15067-3-3 - Information technology - Home Electronic System (HES) application model - Part 3-3: Model of a system of interacting Energy Management Agents (EMAs) for demand response energy management
- ISO/IEC-15067-3-51 - Information technology - Home Electronic System (HES) application model - Part 3-51: Framework of a narrow AI engine for a premises energy management system using energy management agents
- ISO/IEC-15897 - Information technology - User interfaces - Procedures for the registration of cultural elements
- ISO/IEC-17917 - Smart cities - Guidance to establishing a decision-making framework for sharing data and information services
- ISO/IEC-18012-1 - Information technology - Home Electronic System - Guidelines for product interoperability - Part 1: Introduction
- ISO/IEC-18012-2 - Information technology - Home Electronic System - Guidelines for product interoperability - Part 2: Taxonomy and application interoperability model
- ISO/IEC-18120 - Information technology - Learning, education, and training - Requirements for e-textbooks in education
- ISO/IEC-18121 - Information technology - Learning, education and training - Virtual experiment framework
- ISO/IEC-19778-1 - Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 1: Collaborative workplace data model
- ISO/IEC-19778-2 - Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 2: Collaborative environment data model
- ISO/IEC-19778-3 - Information technology - Learning, education and training - Collaborative technology - Collaborative workplace - Part 3: Collaborative group data model
- ISO/IEC-19780-1 - Information technology - Learning, education and training - Collaborative technology - Collaborative learning communication - Part 1: Text-based communication
- ISO/IEC-19788-1 - Information technology for learning, education and training - Metadata for learning resources - Part 1: Framework
- ISO/IEC-19788-1-AM1 - - Amendment 1
- ISO/IEC-19788-2 - Information technology - Learning, education and training - Metadata for learning resources - Part 2: Dublin Core elements
- ISO/IEC-19788-3 - Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile
- ISO/IEC-19788-3-AM1 - - Amendment 1
- ISO/IEC-19788-4 - Information technology - Learning, education and training - Metadata for learning resources - Part 4: Technical elements
- ISO/IEC-19788-5 - Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements
- ISO/IEC-19788-8 - Information technology - Learning, education and training - Metadata for learning resources - Part 8: Data elements for MLR records
- ISO/IEC-19788-9 - Information technology - Learning, education and training - Metadata for learning resources - Part 9: Data elements for persons
- ISO/IEC-19796-1 - Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach
- ISO/IEC-19796-3 - Information technology - Learning, education and training - Quality management, assurance and metrics - Part 3: Reference methods and metrics
- ISO/IEC-20006-1 - Information technology for learning, education and training - Information model for competency - Part 1: Competency general framework and information model
- ISO/IEC-20006-2 - Information technology for learning, education and training - Information model for competency - Part 2: Proficiency level information model
- ISO/IEC-20013 - Information technology for learning, education and training - Reference framework of e-Portfolio information
- ISO/IEC-20748-2 - Information technology for learning, education and training - Learning analytics interoperability - Part 2: System requirements
- ISO/IEC-21972 - Information technology - Upper level ontology for smart city indicators
- ISO/IEC-23988 - Information technology - A code of practice for the use of information technology (IT) in the delivery of assessments
- ISO/IEC-24039 - Information technology - Smart city digital platform reference architecture - Data and service
- ISO/IEC-24725-1 - ITLET supportive technology and specification integration - Part 1: Framework
- ISO/IEC-24725-3 - Information technology for learning, education and training - Supportive technology and specific integration - Part 3: Platform and Media Taxonomy (PMT)
- ISO/IEC-24751-1 - Information technology - Individualized adaptability and accessibility in e-learning, education and training - Part 1: Framework and reference model
- ISO/IEC-24751-2 - Information technology - Individualized adaptability and accessibility in e-learning, education and training - Part 2: Access for all personal needs and preferences for digital delivery
- ISO/IEC-24751-3 - Information technology - Individualized adaptability and accessibility in e-learning, education and training - Part 3: Access for all digital resource description
- ISO/IEC-24763 - Information technology - Learning, education and training - Conceptual Reference Model for Competency Information and Related Objects
- ISO/IEC-24767-1 - Information technology - Home network security - Part 1: Security requirements
- ISO/IEC-24767-2 - Information technology - Home network security - Part 2: Internal security services: Secure Communication Protocol for Middleware (SCPM)
- ISO/IEC-27019 - Information technology - Security techniques - Information security controls for the energy utility industry
- ISO/IEC-29106 - Information Technology - Generic Cabling - Introduction to the MICE environmental clas
- ISO/IEC-29106-AM1 - - Amendment 1
- ISO/IEC-29106-AM2 - - Amendment 2
- ISO/IEC-29107-1 - Information technology - Intelligent homes - Taxonomy of specifications - Part 1: The scheme
- ISO/IEC-29108 - Information technology - Terminology for intelligent homes
- ISO/IEC-29127 - Information technology - System Process and Architecture for Multilingual Semantic Reverse Query Expansion
- ISO/IEC-29140-1 - Information technology for learning, education and training - Nomadicity and mobile technologies - Part 1: Nomadicity reference model
- ISO/IEC-29140-2 - Information technology for learning, education and training - Nomadicity and mobile technologies - Part 2: Learner information model for mobile learning
- ISO/IEC-29145-1 - Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services - Part 1: PHY Layer
- ISO/IEC-29145-2 - Information Technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services - Part 2: MAC Layer
- ISO/IEC-29145-3 - Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services - Part 3: NWK Layer
- ISO/IEC-29163-1 - Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 1: Overview Version 1.1
- ISO/IEC-29163-2 - Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 2: Content Aggregation Model Version 1.1
- ISO/IEC-29163-3 - Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 3: Run-Time Environment Version 1.1
- ISO/IEC-29163-4 - Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition - Part 4: Sequencing and Navigation Version 1.1
- ISO/IEC-29187-1 - Information technology - Identification of privacy protection requirements pertaining to learning, education and training (LET) - Part 1: Framework and reference model
- ISO/IEC-30100-1 - Information technology - Home network resource management - Part 1: Requirements
- ISO/IEC-30100-2 - Information technology - Home network resource management - Part 2: Architecture
- ISO/IEC-30100-3 - Information technology - Home network resource management - Part 3: Management application
- ISO/IEC-30145-1 - Information technology - Smart City ICT reference framework - Part 1: Smart city business process framework
- ISO/IEC-30145-2 - Information technology - Smart City ICT reference framework - Part 2: Smart city knowledge management framework
- ISO/IEC-30146 - Information technology - Smart city ICT indicators
- ISO/IEC-30182 - Smart city concept model - Guidance for establishing a model for data interoperability
- ISO/IEC-5087-1 - Information technology - City data model - Part 1: Foundation level concepts
- ISO/IEC-5087-2 - Information technology - City data model - Part 2: City level concepts
- ISO/IEC-5153-1 - Information technology - City service platform for public health emergencies - Part 1: Overview and general requirements
Other SDOs:
- DIN-EN-13321-1 - Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements; German version EN 13321-1:2012
- DIN-EN-14968 - Semantics for Groundwater Data Interchange
- DIN-EN-ISO-16484-2 - Part 2: Hardware, Building Automation & Control Systems (Bacs)
- DIN-EN-ISO-16484-3 - Part 3: Functions, Building Automation & Control Systems (Bacs)
- DIN-EN-ISO-22000 - Food Safety Management Systems - Requirements for Any Organization in the Food Chain
- EN-13321-1 - Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements
- EN-13321-2 - Open Data Communication in Building Automation, Controls and Building Management - Home and Building Electronic Systems - Part 2: KNXnet/IP Communication
- EN-14908-1 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
- EN-14908-2 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication
- EN-14908-3 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
- EN-14908-4 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication
- EN-14908-5 - Part 5: Implementation, Open Data Communication in Building Automation, Controls & Bu
- EN-14908-6 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements
- EN-14968 - Semantics for Groundwater Data Interchange
- EN-15232 - Energy Performance of Buildings - Energy performance of buildings - Part 1: Impact of Building Automation, Controls and Building Management - Modules M10-4,5,6,7,8,9,10
- EN-15518-1 - Part 1: Global Definitions & Components, Winter Maintenance Equipment - Road Weather
- EN-15518-2 - Part 2: Road Winter - Recommended Observation & Forecast, Winter Maintenance Equipment
- EN-15518-3 - Part 3: Requirements on Measured Values of Stationary Equipments, Winter Maintenance E
- EN-15942 - Sustainability of construction works - Environmental product declarations - Communication format business-to-business
- EN-15943 - Curriculum Exchange Format (CEF) - Data model
- EN-15981 - European Learner Mobility - Achievement information (EuroLMAI)
- EN-15982 - Metadata for Learning Opportunities (MLO) - Advertising
- EN-16425 - Simple Publishing Interface
- EN-16590-1 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified)
- EN-16590-2 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)
- EN-16590-3 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)
- EN-16590-4 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified)
- EN-16603-31-04 - Space engineering - Exchange of thermal analysis data
- EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements
- EN-16831 - Tractors and machinery for agriculture and forestry - Safety - Format for reporting accidents
- EN-50090-4-3 - Home and Building Electronic Systems (HBES) - Part 4-3: Media independent layers - Communication over IP
- EN-50667 - Information technology - Automated infrastructure management (AIM) systems - Requirements, data exchange and applications
- EN-60987 - Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
- EN-61937-10 - Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10: Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format
- EN-62106 - Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz
- EN-62227 - Multimedia home server systems - Digital rights permission code
- EN-62298-1 - Teleweb Application, General Description
- EN-62298-2 - Teleweb Application, Delivery Methods
- EN-62298-3 - Teleweb Application, Superteletext Profile
- EN-62298-4 - Teleweb Application, Hyperteletext Profile
- EN-62455 - Internet protocol (IP) and transport stream (TS) based service access
- EN-62698 - Multimedia home server systems - Rights information interoperability for IPTV
- EN-62827-1 - Wireless Power Transfer - Management - Part 1: Common Components
- EN-ISO-16484-1 - Part 1: Project Specification & Implementation, Building Automation & Control Systems
- EN-ISO-16484-2 - Part 2: Hardware, Building Automation & Control Systems (Bacs)
- EN-ISO-16484-3 - Part 3: Functions, Building Automation & Control Systems (Bacs)
- EN-ISO-16484-5 - Building automation and control systems (BACS) - Part 5: Data communication protocol
- EN-ISO-16484-6 - Building automation and control systems (BACS) - Part 6: Data communication conformance testing
- EN-ISO-20380 - Public swimming pools. Computer vision systems for the detection of drowning accidents in swimming pools. Safety requirements and test methods
- EN-ISO-22311 - Societal security - Video-surveillance - Export interoperability
- EN-ISO-9241-151 - Ergonomics of Human-System Interaction, Guidance on World Wide Web User Interfaces
- EN-ISO/IEC-19788-1 - Information technology - Learning, education and training - Metadata for learning resources - Part 1: Framework (ISO/IEC 19788-1:2011)
- EN-ISO/IEC-19788-2 - Information technology - Learning, education and training - Metadata for learning resources - Part 2: Dublin Core elements (ISO/IEC 19788-2:2011)
- EN-ISO/IEC-19788-3 - Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile (ISO/IEC 19788-3:2011)
- EN-ISO/IEC-19788-5 - Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012)
- EN-ISO/IEC-19796-1 - Information Technology, Learning, Education & Training, Quality Management, Assurance
- ISO/IEC-15045-4-1 - Information technology - Home Electronic System (HES) gateway - Part 4-1: Structure - Structural class and module requirements
- ISO/IEC-15045-4-2 - Information technology - Home Electronic System (HES) gateway - Part 4-2: Structure - Simple gateway
- SIS-CEN/TR-15449 - Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures
- SIS-CEN/TR-15449-1 - Geographic information - Spatial data infrastructures - Part 1: Reference model
- SIS-CEN/TR-15449-2 - Geographic information - Spatial data infrastructures - Part 2: Best practices
- SIS-CEN/TR-15449-3 - Geographic information - Spatial data infrastructures - Part 3: Data centric view
- SIS-CEN/TR-15449-4 - Geographic information - Spatial Data Infrastructure - Service centric view
- SIS-CEN/TR-15449-5 - Geographic information - Spatial data infrastructures - Part 5: Validation and testing
- SIS-CEN/TR-17167 - Communication system for meters - Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information
- SIS-CEN/TS-14014 - Postal services - Hybrid Mail - XML definition of encapsulation of letters for automated postal handling
- SIS-CEN/TS-16316 - Postal services - Open interface - Sortplan
- SIS-CEN/TS-16919 - Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE
- SIS-CEN/TS-17073 - Postal services - Interfaces for cross border parcels
- SIS-ISO/TS-15143-3 - Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 3: Telematics data
- SIS-ISO/TS-19135-2 - Geographic information - Procedures for item registration - Part 2: XML Schema Implementation
- SIS-ISO/TS-19139-2 - Geographic information - Metadata - XML Schema Implementation - Part 2 : Extensions for imagery and gridded data (ISO/TS 19139-2:2012, IDT)
- SIS-ISO/TS-19150-1 - Geographic information - Ontology - Part 1: Framework (ISO/TS 19150-1:2012, IDT)
- SIS-ISO/TS-19158 - Geographic information - Quality assurance of data supply (ISO/TS 19158:2012, IDT)
- SIS-TR-22 - Geographic information - Surface Water Systems - Handbook
- SIS-TR-40 - Geographic information - Technical framework - Manual for data product specification
- SS-637008 - Geographic information - Water Systems - Rules for national applications and for the Inspire hydrography theme
- SS-637009 - Geographic information - Data on forest and forestry
- SS-EN-13321-1 - Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements
- SS-EN-13321-2 - Open Data Communication in Building Automation, Controls and Building Management - Home and Building Electronic Systems - Part 2: KNXnet/IP Communication
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-13757-1 - Communication systems for meters - Part 1: Data exchange
- SS-EN-13757-2 - Communication systems for meters - Part 2: Wired M-Bus communication
- SS-EN-13757-3 - Communication systems for meters - Part 3: Application protocols
- SS-EN-14908-1 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 1: Protocol Stack
- SS-EN-14908-2 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication
- SS-EN-14908-3 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification
- SS-EN-14908-4 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication
- SS-EN-14908-5 - Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline - Control Network Protocol - Part 5: Implementation
- SS-EN-14908-6 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements
- SS-EN-14908-7 - Open communication in building automation, controls and building management - Control Network Protocol - Part 7: Communication via internet protocols
- SS-EN-14908-8 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 8: Communication using Broadband over Power Line Networks - with internet protocols
- SS-EN-14908-9 - Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 9: Wireless Communication in ISM bands
- SS-EN-14968 - Semantics for groundwater data interchange
- SS-EN-15221-7 - Facility Management - Part 7: Guidelines for Performance Benchmarking
- SS-EN-15232 - Energy performance of buildings - Impact of Building Automation, Controls and Building Management
- SS-EN-15518-1 - Winter maintenance equipment - Road weather information systems - Part 1: Global definitions and components
- SS-EN-15518-2 - Winter maintenance equipment - Road weather information systems - Part 2: Road weather - Recommended observation and forecast
- SS-EN-15518-3 - Winter maintenance equipment - Road weather information systems - Part 3: Requirements on measured values of stationary equipments
- SS-EN-15942 - Sustainability of construction works - Environmental product declarations - Communication format business-to-business
- SS-EN-15943 - Curriculum Exchange Format (CEF) - Data model
- SS-EN-15981 - European Learner Mobility - Achievement information (EuroLMAI)
- SS-EN-15982 - Metadata for Learning Opportunities (MLO) - Advertising
- SS-EN-16425 - Simple Publishing Interface
- SS-EN-16590-1 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified)
- SS-EN-16590-2 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)
- SS-EN-16590-3 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)
- SS-EN-16590-4 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified)
- SS-EN-16603-31-04 - Space engineering - Exchange of thermal analysis data
- SS-EN-16604-30-03 - Space - Space Situational Awareness Monitoring - Part 30-03: Observation System Data Message (OSDM)
- SS-EN-16661 - Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements
- SS-EN-16831 - Tractors and machinery for agriculture and forestry - Safety - Format for reporting accidents
- SS-EN-17531 - Reporting in support of supervision of online gambling services by the gambling regulatory authorities of the Member States
- SS-EN-1931 - Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties
- SS-EN-ISO-16484-2 - Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004)
- SS-EN-ISO-16484-3 - Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005)
- SS-EN-ISO-16484-5 - Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2022)
- SS-EN-ISO-16484-5-AM1 - Building automation and control systems (BACS) - Part 5: Data communication protocol - Amendment 1 (ISO 16484-5:2017/Amd 1:2020)
- SS-EN-ISO-16484-6 - Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2014)
- SS-EN-ISO-18526-4 - Eye and face protection - Test methods - Part 4: Headforms (ISO 18526-4:2020)
- SS-EN-ISO-18557 - Characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes (ISO 18557:2017)
- SS-EN-ISO-19101-1 - Geographic information - Reference model - Part 1: Fundamentals (ISO 19101-1:2014)
- SS-EN-ISO-19111 - Geographic information - Referencing by coordinates - Amendment 1 (ISO 19111:2019/Amd 1:2021)
- SS-EN-ISO-19111-2 - Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values (ISO 19111-2:2009)
- SS-EN-ISO-19111-AM2 - Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
- SS-EN-ISO-19143 - Geographic information - Filter encoding (ISO 19143:2010)
- SS-EN-ISO-19144-1 - Geographic information - Classification systems - Part 1: Classification system structure (ISO 19144-1:2009)
- SS-EN-ISO-19148 - Geographic information - Linear referencing (ISO 19148:2021)
- SS-EN-ISO-19152 - Geographic information - Land Administration Domain Model (LADM) (ISO 19152:2012)
- SS-EN-ISO-19156 - Geographic information - Observations and measurements (ISO 19156:2011)
- SS-EN-ISO-19157 - Geographic information - Data quality (ISO 19157:2013)
- SS-EN-ISO-19157-AM1 - Geographic information - Data quality - Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018)
- SS-EN-ISO-20380 - Public swimming pools - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods (ISO 20380:2017)
- SS-EN-ISO-22311 - Societal security - Video-surveillance - Export interoperability (ISO 22311:2012)
- SS-EN-ISO-22510 - Open data communication in building automation, controls and building management - Home and building electronic systems - KNXnet/IP communication (ISO 22510:2019)
- SS-EN-ISO-22739 - Blockchain and distributed ledger technologies - Vocabulary (ISO 22739:2020)
- SS-EN-ISO-23606 - Textiles - Knitted fabrics - Representation and pattern design (ISO 23606:2009)
- SS-EN-ISO-25119-1 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018)
- SS-EN-ISO-25119-1-AM1 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development - Amendment 1 (ISO 25119-1:2018/Amd 1:2020)
- SS-EN-ISO-25119-2 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019)
- SS-EN-ISO-25119-3 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2018)
- SS-EN-ISO-25119-3-AM1 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software - Amendment 1 (ISO 25119-3:2018/Amd 1:2020)
- SS-EN-ISO-25119-4 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018)
- SS-EN-ISO-25119-4-AM1 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes - Amendment 1 (ISO 25119-4:2018/Amd 1:2020)
- SS-EN-ISO-27509 - Petroleum and natural gas industries - Compact flanged connections with IX seal ring (ISO 27509:2020)
- SS-EN-ISO-9241-151 - Ergonomics of human-system interaction - Part 151: Guidance on World Wide Web user interfaces (ISO 9241-151:2008)
- SS-EN-ISO/IEC-19788-1 - Information technology - Learning, education and training - Metadata for learning resources - Part 1: Framework (ISO/IEC 19788-1:2011)
- SS-EN-ISO/IEC-19788-2 - Information technology - Learning, education and training - Metadata for learning resources - Part 2: Dublin Core elements (ISO/IEC 19788-2:2011)
- SS-EN-ISO/IEC-19788-3 - Information technology - Learning, education and training - Metadata for learning resources - Part 3: Basic application profile (ISO/IEC 19788-3:2011)
- SS-EN-ISO/IEC-19788-5 - Information technology - Learning, education and training - Metadata for learning resources - Part 5: Educational elements (ISO/IEC 19788-5:2012)
- SS-EN-ISO/IEC-19796-1 - Information technology - Learning, education, and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005)
- SS-ENV-13321-1 - Data communication for HVAC application automation net - Part 1: BACnet, Profibus, World FIP
- SS-ENV-13321-2 - Data communication for HVAC application - Automation net - Part 2: EIBnet
- SS-ENV-1805-1 - Data communication for HVAC application management net - Part 1: Building Automation and Control Networking (BACnet)
- SS-ISO-11783-1 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 1: General standard for mobile data communication (ISO 11783-1:2017, IDT)
- SS-ISO-11783-10 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange (ISO 11783-10:2015, IDT)
- SS-ISO-11783-11 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 11: Mobile data element dictionary (ISO 11783-11:2011, IDT)
- SS-ISO-11783-12 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 12: Diagnostics services (ISO 11783-12:2019, IDT)
- SS-ISO-11783-13 - Tractors and machinery for agriculture and forestry Serial control and communications data network Part 13: File server (ISO 11783-13:2022, IDT)
- SS-ISO-11783-14 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 14: Sequence control (ISO 11783-14:2013, IDT)
- SS-ISO-11783-2 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layer (ISO 11783-2:2019, IDT)
- SS-ISO-11783-2-AM1 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 2: Physical layer (ISO 11783-2:2002/Amd.1:2006, IDT)
- SS-ISO-11783-3 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 3: Data link layer (ISO 11783-3:2018, IDT)
- SS-ISO-11783-4 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 4: Network layer (ISO 11783-4:2011, IDT)
- SS-ISO-11783-5 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5: Network management (ISO PRF 11783-5, IDT)
- SS-ISO-11783-6 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 6: Virtual terminal (ISO 11783-6:2018, IDT)
- SS-ISO-11783-7 - Tractors and machinery for agriculture and forestry Serial control and communications data network Part 7: Implement messages application layer (ISO 11783-7:2022, IDT)
- SS-ISO-11783-7-AM1 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 7: Implement messages application layer - Amendment 1 (ISO 11783-7:2015/Amd 1:2018, IDT)
- SS-ISO-11783-8 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 8: Power train messages (ISO 11783-8:2006, IDT)
- SS-ISO-11783-9 - Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 9: Tractor ECU (ISO 11783-9:2012, IDT)
- SS-ISO-11788-2 - Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 2: Dairy farming
- SS-ISO-11788-3 - Electronic data interchange between information systems in agriculture - Agricultural data element dictionary - Part 3: Pig farming
- SS-ISO-12188-1 - Tractors and machinery for agriculture and forestry - Test procedures for positioning and guidance systems in agriculture - Part 1: Dynamic testing of satellite-based positioning devices (ISO 12188-1:2010, IDT)
- SS-ISO-12188-2 - Tractors and machinery for agriculture and forestry - Test procedures for positioning and guidance systems in agriculture - Part 2: Testing of satellite-based auto-guidance systems during straight and level travel (ISO 12188-2:2012, IDT)
- SS-ISO-13374-1 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 1: General guidelines
- SS-ISO-13374-2 - Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 2: Data processing (ISO 13374-2:2007, IDT)
- SS-ISO-14223-1 - Radiofrequency identification of animals - Advanced transponders - Part 1: Air interface (ISO 14223-1:2011, IDT)
- SS-ISO-14223-2 - Radiofrequency identification of animals - Advanced transponders - Part 2: Code and command structure (ISO 14223-2:2010, IDT)
- SS-ISO-14223-3 - Radiofrequency identification of animals - Advanced transponders - Part 3: Applications (ISO 14223-3:2018, IDT)
- SS-ISO-15143-1 - Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 1: System architecture (ISO 15143-1:2010, IDT)
- SS-ISO-15143-2 - Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 2: Data dictionary (ISO 15143-2:2010, IDT)
- SS-ISO-17532 - Stationary equipment for agriculture - Data communications network for livestock farming (ISO 17532:2007, IDT)
- SS-ISO-1816 - Continuous mechanical handling equipment for loose bulk materials and unit loads Belt conveyors Basic characteristics of motorized driving pulleys (ISO 1816:1975, IDT)
- SS-ISO-19111 - Geographic information - Referencing by coordinates (ISO 19111:2019, IDT)
- SS-ISO-19144-2 - Geographic information - Classification systems - Part 2: Land Cover Meta Language (LCML) (ISO 19144-2:2012, IDT)
- SS-ISO-19155 - Geographic information - Place Identifier (PI) architecture (ISO 19155:2012, IDT)
- SS-ISO-19155-2 - Geographic information - Place Identifier (PI) architecture - Part 2: Place Identifier (PI) linking (ISO 19155-2:2017, IDT)
- SS-ISO-19156 - Geographic information - Observations and measurements (ISO 19156:2011, IDT)
- SS-ISO-20112-1 - Tractors and machinery for agriculture and forestry - Camera interface between tractor and implement - Part 1: Analogue camera interface (ISO 20112-1:2018, IDT)
- SS-ISO-25119-1 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010, IDT)
- SS-ISO-25119-2 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019, IDT)
- SS-ISO-25119-3 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010, IDT)
- SS-ISO-25119-4 - Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010, IDT)
- UNE-CEN-16080 - Internet Content and communications filtering software and services