Document Center is acquired by Nimonik

Document Center List of Standards on Car Informatics. On Board Computer Systems Including Navigation Systems, Car Radio, Etc.

ICS Code 43.040.15

Return to ICS Index.

Up to Level 2:

• 43.040 (Road vehicle systems Electric road vehicle systems, see 43.120 Motorcycle and moped systems, see 43.140 Cycle systems, see 43.150)

The following documents are a part of this series:

ASTM:

• ASTM-E2493 - Standard Guide for the Collection of Non-Volatile Memory Data in Evidentiary Vehicle Electronic Control Units (Withdrawn 2016)
• ASTM-F3200 - Standard Terminology for Robotics, Automation, and Autonomous Systems
• ASTM-F3327 - Standard Practice for Recording the A-UGV Test Configuration

BSI:

• BS-5942-13 - High fidelity audio equipment and systems; minimum performance requirements. Specification for high fidelity systems for use in vehicles (for example, motor cars); FM radio tuner units
• BS-AU-207 - Specification for dimensions of car radio installation space
• BS-EN-15213-1 - Intelligent transport systems. After-theft systems for the recovery of stolen vehicles
• BS-EN-16072 - Intelligent transport systems. ESafety. Pan-European eCall operating requirements
• BS-EN-16815 - CleANopen. Application profile for municipal vehicles
• BS-EN-16944 - Agricultural machinery and tractors. Standardized access to repair and maintenance information (RMI). Requirements
• BS-EN-50325-2 - Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces
• BS-EN-50325-3 - Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. Smart distributed systems (SDS)
• BS-EN-50325-5 - Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces
• BS-EN-63005-1 - Event video data recorder for road vehcle accidents
• BS-EN-IEC-63005-2 - Event video data recorder for road vehicle accidents
• BS-EN-IEC-63033-1 - Multimedia systems and equipment for vehicles. Surround view system
• BS-EN-IEC-63033-2 - Multimedia systems and equipment for vehicles. Surround view system
• BS-EN-IEC-63033-2-TC - Tracked Changes. Multimedia systems and equipment for vehicles. Surround view system
• BS-EN-IEC-63033-3 - Multimedia systems and equipment for vehicles. Surround view system
• BS-EN-IEC-63246-1 - Configurable car infotainment services (CCIS)
• BS-EN-IEC-63246-2 - Multimedia systems and equipment for cars. Configurable Car Infotainment Services (CCIS)
• BS-EN-IEC-63246-3 - Configurable car infotainment services (CCIS)
• BS-EN-ISO-14823 - Intelligent transport systems. Graphic data dictionary
• BS-EN-ISO-14823-1 - Intelligent transport systems. Graphic data dictionary
• BS-EN-ISO-14823-1-TC - Tracked Changes. Intelligent transport systems. Graphic data dictionary
• BS-EN-ISO-14907-1 - Electronic fee collection. Test procedures for user and fixed equipment
• BS-EN-ISO-14907-2 - Electronic fee collection. Test procedures for user and fixed equipment
• BS-EN-ISO-15005 - Road vehicles. Ergonomic aspects of transportation and control systems. Dialogue management principles and compliance procedures
• BS-EN-ISO-15005-TC - Tracked Changes. Road vehicles. Ergonomic aspects of transportation and control systems. Dialogue management principles and compliance procedures
• BS-EN-ISO-15006 - Road vehicles. Ergonomic aspects of transport information and control systems. Specifications for in-vehicle auditory presentation
• BS-EN-ISO-15008 - Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and test procedures for in-vehicle visual presentation
• BS-EN-ISO-15008-TC - Tracked Changes. Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and test procedures for in-vehicle visual presentation
• BS-EN-ISO-18541-1 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
• BS-EN-ISO-18541-1-TC - Tracked Changes. Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
• BS-EN-ISO-18541-2 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
• BS-EN-ISO-18541-3 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
• BS-EN-ISO-18541-4 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
• BS-EN-ISO-18541-4-TC - Tracked Changes. Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
• BS-EN-ISO-18541-5 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
• BS-EN-ISO-18541-6 - Road vehicles. Standardized access to automotive repair and maintenance information (RMI)
• BS-EN-ISO-18542-1 - Road vehicles. Standardized repair and maintenance information (RMI) terminology
• BS-EN-ISO-18542-2 - Road vehicles. Standardized repair and maintenance information (RMI) terminology
• BS-ISO-10681-1 - Road vehicles. Communication on FlexRay
• BS-ISO-10681-2 - Road vehicles. Communication on FlexRay
• BS-ISO-11898-1 - Road vehicles. Controller area network (CAN)
• BS-ISO-11898-1-TC - Tracked Changes. Road vehicles. Controller area network (CAN)
• BS-ISO-11898-2 - Road vehicles. Controller area network (CAN)
• BS-ISO-11898-2-TC - Tracked Changes. Road vehicles. Controller area network (CAN)
• BS-ISO-11898-3 - Road vehicles. Controller area network (CAN)
• BS-ISO-11898-5 - Road vehicles. Controller area network (CAN)
• BS-ISO-11898-6 - Road vehicles. Controller area network (CAN)
• BS-ISO-11992-1 - Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles
• BS-ISO-11992-2 - Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles
• BS-ISO-11992-2-TC - Tracked Changes. Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles
• BS-ISO-11992-3 - Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles
• BS-ISO-11992-4 - Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles
• BS-ISO-11992-4-TC - Tracked Changes. Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles
• BS-ISO-13209-3-TC - Tracked Changes. Road vehicles. Open Test sequence eXchange format (OTX)
• BS-ISO-15007 - Road vehicles. Measurement and analysis of driver visual behaviour with respect to transport information and control systems
• BS-ISO-15007-TC - Tracked Changes. Road vehicles. Measurement and analysis of driver visual behaviour with respect to transport information and control systems
• BS-ISO-15765-1 - Road vehicles. Diagnostic communication over controller area network (DoCAN)
• BS-ISO-15765-2 - Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
• BS-ISO-15765-2-TC - Tracked Changes. Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
• BS-ISO-15765-4 - Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
• BS-ISO-15765-4-TC - Tracked Changes. Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
• BS-ISO-15765-5 - Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
• BS-ISO-15765-5-TC - Tracked Changes. Road vehicles. Diagnostic communication over Controller Area Network (DoCAN)
• BS-ISO-16673 - Road vehicles. Ergonomic aspects of transport information and control systems. Occlusion method to assess visual demand due to the use of in-vehicle systems
• BS-ISO-16673-TC - Tracked Changes. Road vehicles. Ergonomic aspects of transport information and control systems. Occlusion method to assess visual demand due to the use of in-vehicle systems
• BS-ISO-16845-1 - Road vehicles. Controller area network (CAN) conformance test plan
• BS-ISO-16845-2 - Road vehicles. Controller area network (CAN) conformance test plan
• BS-ISO-16845-2-TC - Tracked Changes. Road vehicles. Controller area network (CAN) conformance test plan
• BS-ISO-17215-1 - Road vehicles. Video communication interface for cameras (VCIC)
• BS-ISO-17215-2 - Road vehicles. Video communication interface for cameras (VCIC)
• BS-ISO-17215-3 - Road vehicles. Video communication interface for cameras (VCIC)
• BS-ISO-17215-3-TC - Tracked Changes. Road vehicles. Video communication interface for cameras (VCIC)
• BS-ISO-17215-4 - Road vehicles. Video communication interface for cameras (VCIC)
• BS-ISO-17356-2 - Road vehicles. Open interface for embedded automotive applications
• BS-ISO-17356-3 - Road vehicles. Open interface for embedded automotive applications
• BS-ISO-17356-4 - Road vehicles. Open interface for embedded automotive applications
• BS-ISO-17356-5 - Road vehicles. Open interface for embedded automotive applications
• BS-ISO-17356-6 - Road vehicles. Open interface for embedded automotive applications
• BS-ISO-17386 - Intelligent transport systems. Manoeuvring aids for low-speed operation (MALSO). Performance requirements and test procedures
• BS-ISO-17458-1 - Road vehicles. FlexRay communications system
• BS-ISO-17458-2 - Road vehicles. FlexRay communications system
• BS-ISO-17458-3 - Road vehicles. FlexRay communications system
• BS-ISO-17458-4 - Road vehicles. FlexRay communications system
• BS-ISO-17458-5 - Road vehicles. FlexRay communications system
• BS-ISO-17488 - Road vehicles. Transport information and control systems. Detection-response task (DRT) for assessing attentional effects of cognitive load in driving
• BS-ISO-17987-1 - Road vehicles. Local Interconnect Network (LIN)
• BS-ISO-17987-2 - Road vehicles. Local Interconnect Network (LIN)
• BS-ISO-17987-4 - Road vehicles. Local Interconnect Network (LIN)
• BS-ISO-17987-6 - Road vehicles. Local Interconnect Network (LIN)
• BS-ISO-17987-7 - Road vehicles. Local Interconnect Network (LIN)
• BS-ISO-17987-8 - Road vehicles. Local Interconnect Network (LIN)
• BS-ISO-20035 - Intelligent transport systems. Cooperative adaptive cruise control systems (CACC). Performance requirements and test procedures
• BS-ISO-20078-1 - Road vehicles. Extended vehicle (ExVe) web services
• BS-ISO-20078-1-TC - Tracked Changes. Road vehicles. Extended vehicle (ExVe) web services
• BS-ISO-20078-2 - Road vehicles. Extended vehicle (ExVe) web services
• BS-ISO-20078-2-TC - Tracked Changes. Road vehicles. Extended vehicle (ExVe) web services
• BS-ISO-20078-3 - Road vehicles. Extended vehicle (ExVe) web services
• BS-ISO-20078-3-TC - Tracked Changes. Road vehicles. Extended vehicle (ExVe) web services
• BS-ISO-20794-3 - Road vehicles. Clock extension peripheral interface (CXPI)
• BS-ISO-20794-4 - Road vehicles. Clock extension peripheral interface (CXPI)
• BS-ISO-20794-5 - Road vehicles. Clock extension peripheral interface (CXPI)
• BS-ISO-20794-6 - Road vehicles. Clock extension peripheral interface (CXPI)
• BS-ISO-20794-7 - Road vehicles. Clock extension peripheral interface (CXPI)
• BS-ISO-21806-1 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-12 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-2 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-3 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-4 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-5 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-6 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-7 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-8 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21806-9 - Road vehicles. Media Oriented Systems Transport (MOST)
• BS-ISO-21956 - Road vehicles. Ergonomics aspects of transport information and control systems. Human machine interface specifications for keyless ignition systems
• BS-ISO-22085-2 - Intelligent transport systems (ITS). Nomadic device service platform for micro mobility
• BS-ISO-22085-3 - Intelligent transport systems (ITS). Nomadic device service platform for micro mobility
• BS-ISO-22178 - Intelligent transport systems. Low speed following (LSF) systems. Performance requirements and test procedures
• BS-ISO-22179 - Intelligent transport systems. Full speed range adaptive cruise control (FSRA) systems. Performance requirements and test procedures
• BS-ISO-22738 - Intelligent transport systems. Localized communications. Optical camera communication
• BS-ISO-22840 - Intelligent transport systems. Devices to aid reverse manoeuvres. Extended-range backing aid systems (ERBA)
• BS-ISO-22900-1 - Road vehicles. Modular vehicle communication interface (MVCI)
• BS-ISO-22900-2 - Road vehicles. Modular vehicle communication interface (MVCI)
• BS-ISO-22900-2-TC - Tracked Changes. Road vehicles. Modular vehicle communication interface (MVCI)
• BS-ISO-22900-3 - Road vehicles. Modular vehicle communication interface (MVCI)
• BS-ISO-22902-1 - Road vehicles. Automotive multimedia interface
• BS-ISO-22902-2 - Road vehicles. Automotive multimedia interface
• BS-ISO-22902-3 - Road vehicles. Automotive multimedia interface
• BS-ISO-22902-4 - Road vehicles. Automotive multimedia interface
• BS-ISO-22902-5 - Road vehicles. Automotive multimedia interface
• BS-ISO-22902-6 - Road vehicles. Automotive multimedia interface
• BS-ISO-22902-7 - Road vehicles. Automotive multimedia interface
• BS-ISO-23132 - Road vehicles. Extended Vehicle (ExVe) time critical applications. General requirements, definitions and classification methodology of timeconstrained situations related to Road and ExVe Safety (RExVeS)
• BS-ISO-23239-1 - Road vehicles. Vehicle domain service (VDS)
• BS-ISO-24089 - Road vehicles. Software update engineering
• BS-ISO/SAE-21434 - Road vehicles. Cybersecurity engineering
• DD-235 - Guide To In-Vehicle Information Systems
• DD-CEN-15213-1 - Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Reference architecture and terminology
• DD-CEN-ISO-14822-1 - Traffic and travel information. General specifications for medium-range pre-information via dedicated short-range communication
• DD-CEN-ISO-14823 - Traffic and travel information. Messages via media independent stationary dissemination systems. Graphic data dictionary for pre-trip and in-trip information dissemination systems
• DD-CEN-ISO-14907-1 - Electronic fee collection. Test procedures for user and fixed equipment. Description of test procedures
• DD-CEN-ISO-14907-2 - Electronic fee collection. Test procedures for user and fixed equipment
• PD-CEN-13149-10 - Public transport. Road vehicle scheduling and control systems
• PD-CEN-13149-11 - Public transport. Road vehicle scheduling and control systems
• PD-CEN-13149-7 - Public transport. Road vehicle scheduling and control systems
• PD-CEN-13149-8 - Public transport. Road vehicle scheduling and control systems
• PD-CEN-13149-9 - Public transport. Road vehicle scheduling and control systems
• PD-CEN-16596 - Electric-electronic interface between chassis-cab and bodywork of refuse collection vehicles (RCVs)
• PD-CEN-16815 - CleANopen. Application profile for municipal vehicles
• PD-CEN-ISO-14907-1 - Electronic fee collection. Test procedures for user and fixed equipment
• PD-CEN-ISO-14907-2 - Electronic fee collection. Test procedures for user and fixed equipment
• PD-CEN-ISO-19321 - Intelligent transport systems. Cooperative ITS. Dictionary of in-vehicle information (IVI) data structures
• PD-IEC-63033-1 - Car multimedia systems and equipment. Drive monitoring system
• PD-IEC-63246-4 - Configurable car infotainment services (CCIS)
• PD-ISO-10992 - Intelligent transport systems. Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles
• PD-ISO-10992-2 - Intelligent transport systems. Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles
• PD-ISO-12204 - Road vehicles. Ergonomic aspects of transport information and control systems. Introduction to integrating safety critical and time critical warning signals
• PD-ISO-14198 - Road vehicles. Ergonomic aspects of transport information and control systems. Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems
• PD-ISO-15007-2 - Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems
• PD-ISO-16951 - Road vehicles. Ergonomic aspects of transport information and control systems (TICS). Procedures for determining priority of on-board messages presented to drivers
• PD-ISO-17987-5 - Road vehicles. Local Interconnect Network (LIN)
• PD-ISO-18317 - Intelligent transport systems. Pre-emption of ITS communication networks for disaster and emergency communication. Use case scenarios
• PD-ISO-20078-4 - Road vehicles. Extended vehicle (ExVe) web services
• PD-ISO-20078-4-TC - Tracked Changes. Road vehicles. Extended vehicle (ExVe) web services
• PD-ISO-21735 - Intelligent transport systems. Framework architecture for plug and play (PnP) functionality in vehicles utilizing nomadic devices
• PD-ISO-21957 - Road vehicles. Visibility. Specifications and test procedures for head-up displays (HUD)
• PD-ISO-22085-1 - Intelligent transport systems (ITS). Nomadic device service platform for micro-mobility
• PD-ISO-23786 - Road vehicles. Solutions for remote access to vehicle. Criteria for risk assessment
• PD-ISO-23791 - Road vehicles. Extended vehicle (ExVe) web services. Result of the risk assessment on ISO 20078 series
• PD-ISO/PAS-8926 - Road vehicles. Functional safety. Use of pre-existing software architectural elements

IEC:

• IEC-63005-1 - Event video data recorder for road vehcle accidents - Part 1: Basic requirements
• IEC-63033-2 - Car multimedia systems and equipment - Drive monitoring system - Part 2: Recording methods of the drive monitoring system
• IEC-63033-3 - Car multimedia systems and equipment - Drive monitoring system - Part 3: Measurement methods
• IEC-63033-4 - Multimedia systems and equipment for vehicles - Surround view system - Part 4: Application for camera monitor systems
• IEC-63246-2 - Configurable car infotainment services (CCIS) - Part 2: Requirements
• IEC-63246-3 - Configurable car infotainment services (CCIS) - Part 3: Framework
• IEC-63246-4 - Configurable car infotainment services (CCIS) - Part 4: Protocol
• IEC-63479-1 - Infotainment Services for Public Vehicles (PVIS) - Part 1: General

ISO:

• ISO-10486 - Passenger cars - Car radio identification number (CRIN)
• ISO-10487-1 - Passenger car radio connections - Part 1: Dimensions and general requirements
• ISO-10487-2 - Passenger cars - Connections for car radios - Part 2: Performance requirements
• ISO-10599-1 - Car radios - Coaxial aerial connectors - Part 1: Dimensions
• ISO-10599-2 - Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests
• ISO-10681-1 - Road vehicles - Communication on FlexRay - Part 1: General information and use case definition
• ISO-10681-2 - Road vehicles - Communication on FlexRay - Part 2: Communication layer services
• ISO-10992 - Intelligent transport systems - Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles
• ISO-10992-2 - Intelligent transport systems - Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles - Part 2: Definition and use cases for mobile service convergence
• ISO-11519-1 - Road vehicles - Low-speed serial data communication - Part 1: General and definitions
• ISO-11519-2 - Road vehicles -- Low-speed serial data communication -- Part 2: Low-speed controller area network (CAN)
• ISO-11519-2-1 - Amendment 1 to ISO 11519-2:1994
• ISO-11519-3 - Road vehicles - Low-speed serial data communication - Part 3: Vehicle area network (VAN)
• ISO-11519-3-1 - Amendment 1 to ISO 11519-3:1994
• ISO-11898 - Road vehicles -- Interchange of digital information -- Controller area network (CAN) for high-speed communication
• ISO-11898-1 - Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical coding sublayer
• ISO-11898-2 - Road vehicles - Controller area network (CAN) - Part 2: High-speed physical medium attachment (PMA) sublayer
• ISO-11898-3 - Road vehicles - Controller area network (CAN) - Part 3: Low-speed, fault-tolerant, medium-dependent interface
• ISO-11898-4 - Road vehicles - Controller area network (CAN) - Part 4: Time-triggered communication
• ISO-11898-5 - Road vehicles - Controller area network (CAN) - Part 5: High-speed medium access unit with low-power mode
• ISO-11898-6 - Road vehicles - Controller area network (CAN) - Part 6: High-speed medium access unit with selective wake-up functionality
• ISO-11992-1 - Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1: Physical and data-link layers
• ISO-11992-2 - Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear
• ISO-11992-2-1 - Road vehicles - Electrical connections between towing and towed vehicles - Interchange of digital information - Part 2: Application layer for braking equipmentAmendment 1
• ISO-11992-3 - Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 3: Application layer for equipment other than brakes and running gear
• ISO-11992-3-1 - Road vehicles - Electrical connections between towing and towed vehicles - Interchange of digital information - Part 3: Application layer for non-braking equipment - Amendment 1
• ISO-11992-4 - Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostic communication
• ISO-12204 - Road vehicles - Ergonomic aspects of transport information and control systems - Introduction to integrating safety critical and time critical warning signals
• ISO-13209-2 - Road vehicles - Open Test sequence eXchange format (OTX) - Part 2: Core data model specification and requirements
• ISO-13209-3 - Road vehicles - Open Test sequence eXchange format (OTX) - Part 3: Standard extensions and requirements
• ISO-13209-4 - Road vehicles - Open Test sequence eXchange format (OTX) - Part 4: Expanded extensions interface definition
• ISO-14198 - Road vehicles - Ergonomic aspects of transport information and control systems - Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems
• ISO-14822-1 - Part 1: Downlink, Traffic and Travel Information - General Specifications for Medium-Ran
• ISO-14823 - Intelligent transport systems - Graphic data dictionary
• ISO-14823-1 - Intelligent transport systems - Graphic data dictionary - Part 1: Specification
• ISO-14823-2 - Intelligent transport systems - Graphic data dictionary - Part 2: Examples
• ISO-14907-1 - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures
• ISO-14907-2 - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface
• ISO-15005 - Road vehicles - Ergonomic aspects of transportation and control systems - Dialogue management principles and compliance procedures
• ISO-15006 - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation
• ISO-15007 - Road vehicles - Measurement and analysis of driver visual behaviour with respect to transport information and control systems
• ISO-15007-1 - Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters
• ISO-15007-2 - Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures
• ISO-15008 - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation
• ISO-15075 - Transport information and control systems - In-vehicle navigation systems - Communications message set requirements
• ISO-15497 - Road vehicles -- Development guidelines for vehicle based software
• ISO-15765-1 - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 1: General information and use case definition
• ISO-15765-2 - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services
• ISO-15765-3 - Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 3: Implementation of unified diagnostic services (UDS on CAN)
• ISO-15765-4 - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 4: Requirements for emissions-related systems
• ISO-15765-4-AM1 - - Amendment 1
• ISO-15765-5 - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 5: Specification for an in-vehicle network connected to the diagnostic link connector
• ISO-15765 PACKAGE - HISTORICAL PACKAGE: ISO 15765-1, ISO 15765-2, ISO 15765-3 and ISO 15765-4
• ISO-16352 - Road vehicles - Ergonomic aspects of in-vehicle presentation for transport information and control systems - Warning systems
• ISO-16673 - Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems
• ISO-16845 - Road vehicles - Controller area network (CAN) - Conformance test plan
• ISO-16845-1 - Road vehicles - Controller area network (CAN) conformance test plan - Part 1: Data link layer and physical signalling
• ISO-16845-2 - Road vehicles - Controller area network (CAN) conformance test plan - Part 2: High-speed medium access unit - Conformance test plan
• ISO-16951 - Road vehicles - Ergonomic aspects of transport information and control systems (TICS) - Procedures for determining priority of on-board messages presented to drivers
• ISO-17215-1 - Road vehicles - Video communication interface for cameras (VCIC) - Part 1: General information and use case definition
• ISO-17215-2 - Road vehicles - Video communication interface for cameras (VCIC) - Part 2: Service discovery and control
• ISO-17215-3 - Road vehicles - Video communication interface for cameras (VCIC) - Part 3: Camera message dictionary
• ISO-17215-4 - Road vehicles - Video communication interface for cameras (VCIC) - Part 4: Implementation of communication requirements
• ISO-17287 - Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving
• ISO-17356-1 - Road vehicles - Open interface for embedded automotive applications - Part 1: General structure and terms, definitions and abbreviated terms
• ISO-17356-2 - Road vehicles - Open interface for embedded automotive applications - Part 2: OSEK/VDX specifications for binding OS, COM and NM
• ISO-17356-3 - Road vehicles - Open interface for embedded automotive applications - Part 3: OSEK/VDX Operating System (OS)
• ISO-17356-4 - Road vehicles - Open interface for embedded automotive applications - Part 4: OSEK/VDX Communication (COM)
• ISO-17356-5 - Road vehicles - Open interface for embedded automotive applications - Part 5: OSEK/VDX Network Management (NM)
• ISO-17356-6 - Road vehicles - Open interface for embedded automotive applications - Part 6: OSEK/VDX Implementation Language (OIL)
• ISO-17386 - Intelligent transport systems - Manoeuvring aids for low-speed operation (MALSO) - Performance requirements and test procedures
• ISO-17458-1 - Road vehicles - FlexRay communications system - Part 1: General information and use case definition
• ISO-17458-2 - Road vehicles - FlexRay communications system - Part 2: Data link layer specification
• ISO-17458-3 - Road vehicles - FlexRay communications system - Part 3: Data link layer conformance test specification
• ISO-17458-4 - Road vehicles - FlexRay communications system - Part 4: Electrical physical layer specification
• ISO-17458-5 - Road vehicles - FlexRay communications system - Part 5: Electrical physical layer conformance test specification
• ISO-17488 - Road vehicles - Transport information and control systems - Detection-response task (DRT) for assessing attentional effects of cognitive load in driving
• ISO-17987-1 - Road vehicles - Local Interconnect Network (LIN) - Part 1: General information and use case definition
• ISO-17987-2 - Road vehicles - Local Interconnect Network (LIN) - Part 2: Transport protocol and network layer services
• ISO-17987-3 - Road vehicles - Local Interconnect Network (LIN) - Part 3: Protocol specification
• ISO-17987-4 - Road vehicles - Local Interconnect Network (LIN) - Part 4: Electrical physical layer (EPL) specification 12 V/24 V
• ISO-17987-5 - Road vehicles - Local Interconnect Network (LIN) - Part 5: Application programmers interface (API)
• ISO-17987-6 - Road vehicles - Local Interconnect Network (LIN) - Part 6: Protocol conformance test specification
• ISO-17987-7 - Road vehicles - Local Interconnect Network (LIN) - Part 7: Electrical Physical Layer (EPL) conformance test specification
• ISO-17987-8 - Road vehicles - Local Interconnect Network (LIN) - Part 8: Electrical physical layer (EPL) specification: LIN over DC powerline (DC-LIN)
• ISO-18317 - Intelligent transport systems - Pre-emption of ITS communication networks for disaster and emergency communication - Use case scenarios
• ISO-18541-1 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition
• ISO-18541-2 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements
• ISO-18541-3 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements
• ISO-18541-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test
• ISO-185414-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test
• ISO-18541-5 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 5: Heavy duty specific provision
• ISO-18541-6 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements
• ISO-18542-1 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition
• ISO-18542-2 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority
• ISO-19321 - Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structures
• ISO-20035 - Intelligent transport systems - Cooperative adaptive cruise control systems (CACC) - Performance requirements and test procedures
• ISO-20078-1 - Road vehicles - Extended vehicle (ExVe) web services - Part 1: Content and definitions
• ISO-20078-2 - Road vehicles - Extended vehicle (ExVe) web services - Part 2: Access
• ISO-20078-3 - Road vehicles - Extended vehicle (ExVe) web services - Part 3: Security
• ISO-20078-4 - Road vehicles - Extended vehicle (ExVe) web services - Part 4: Control
• ISO-20794-2 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 2: Application layer
• ISO-20794-3 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 3: Transport and network layer
• ISO-20794-4 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 4: Data link layer and physical layer
• ISO-20794-5 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 5: Application layer conformance test plan
• ISO-20794-6 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 6: Transport and network layer conformance test plan
• ISO-20794-7 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 7: Data link and physical layer conformance test plan
• ISO-21735 - Intelligent transport systems - Framework architecture for plug and play (PnP) functionality in vehicles utilizing nomadic devices
• ISO-21806-1 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 1: General information and definitions
• ISO-21806-10 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 10: 150-Mbit/s coaxial physical layer
• ISO-21806-11 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 11: 150-Mbit/s coaxial physical layer conformance test plan
• ISO-21806-12 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 12: 50-Mbit/s balanced media physical layer
• ISO-21806-13 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 13: 50-Mbit/s balanced media physical layer conformance test plan
• ISO-21806-14 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 14: Lean application layer
• ISO-21806-15 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 15: Lean application layer conformance test plan
• ISO-21806-2 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 2: Application layer
• ISO-21806-3 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 3: Application layer conformance test plan
• ISO-21806-4 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 4: Transport layer and network layer
• ISO-21806-5 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 5: Transport layer and network layer conformance test plan
• ISO-21806-6 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 6: Data link layer
• ISO-21806-7 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 7: Data link layer conformance test plan
• ISO-21806-8 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 8: 150-Mbit/s optical physical layer
• ISO-21806-9 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 9: 150-Mbit/s optical physical layer conformance test plan
• ISO-21956 - Road vehicles - Ergonomics aspects of transport information and control systems - Human machine interface specifications for keyless ignition systems
• ISO-21957 - Road vehicles - Visibility - Specifications and test procedures for head-up displays (HUD)
• ISO-22085-1 - Intelligent transport systems (ITS) - Nomadic device service platform for micro-mobility - Part 1: General information and use case definitions
• ISO-22085-2 - Intelligent transport systems (ITS) - Nomadic device service platform for micro mobility - Part 2: Functional requirements and dataset definitions
• ISO-22085-3 - Intelligent transport systems (ITS) - Nomadic device service platform for micro mobility - Part 3: Data structure and data exchange procedures
• ISO-22178 - Intelligent transport systems - Low speed following (LSF) systems - Performance requirements and test procedures
• ISO-22179 - Intelligent transport systems - Full speed range adaptive cruise control (FSRA) systems - Performance requirements and test procedures
• ISO-22738 - Intelligent transport systems - Localized communications - Optical camera communication
• ISO-22840 - Intelligent transport systems - Devices to aid reverse manoeuvres - Extended-range backing aid systems (ERBA)
• ISO-22900-1 - Road vehicles - Modular vehicle communication interface (MVCI) - Part 1: Hardware design requirements
• ISO-22900-2 - Road vehicles - Modular vehicle communication interface (MVCI) - Part 2: Diagnostic protocol data unit (D-PDU API)
• ISO-22900-3 - Road vehicles - Modular vehicle communication interface (MVCI) - Part 3: Diagnostic server application programming interface (D-Server API)
• ISO-22902-1 - Road vehicles - Automotive multimedia interface - Part 1: General technical overview
• ISO-22902-2 - Road vehicles - Automotive multimedia interface - Part 2: Use cases
• ISO-22902-3 - Road vehicles - Automotive multimedia interface - Part 3: System requirements
• ISO-22902-4 - Road vehicles - Automotive multimedia interface - Part 4: Network protocol requirements for vehicle interface access
• ISO-22902-5 - Road vehicles - Automotive multimedia interface - Part 5: Common message set
• ISO-22902-6 - Road vehicles - Automotive multimedia interface - Part 6: Vehicle interface requirements
• ISO-22902-7 - Road vehicles - Automotive multimedia interface - Part 7: Physical specification
• ISO-23132 - Road vehicles - Extended Vehicle (ExVe) time critical applications - General requirements, definitions and classification methodology of time-constrained situations related to Road and ExVe Safety (RExVeS)
• ISO-23150 - Road vehicles - Data communication between sensors and data fusion unit for automated driving functions - Logical interface
• ISO-23239-1 - Road vehicles - Vehicle domain service (VDS) - Part 1: General information and use case definitions
• ISO-23786 - Road vehicles - Solutions for remote access to vehicle - Criteria for risk assessment
• ISO-23791 - Road vehicles - Extended vehicle (ExVe) web services - Result of the risk assessment on ISO 20078 series
• ISO-23795-1 - Intelligent transport systems - Extracting trip data using nomadic and mobile devices for estimating C02 emissions - Part 1: Fuel consumption determination for fleet management
• ISO-24089 - Road vehicles - Software update engineering
• ISO-24089-AM1 - - Amendment 1: Road vehicles - Software update engineering - Amendment 1
• ISO-24650 - Road vehicles - Sensors for automated driving under adverse weather conditions - Assessment of the cleaning system efficiency
• ISO-26022 - Road vehicles - Ergonomic aspects of transport information and control systems - Simulated lane change test to assess in-vehicle secondary task demand
• ISO-5361 - Anaesthetic and respiratory equipment - Tracheal tubes and connectors
• ISO-7736 - Road vehicles - Car radio for front installation - Installation space including connections
• ISO/DIS-23150 - Road vehicles - Data communication between sensors and data fusion unit for automated driving functions - Logical interface
• ISO/PAS-5112 - Road vehicles - Guidelines for auditing cybersecurity engineering
• ISO/PAS-8235 - Road vehicles - Ergonomic aspects of human vehicle interactions - Taxonomy for the classification of adaptive interactive vehicle systems
• ISO/PAS-8800 - Road vehicles - Safety and artificial intelligence
• ISO/PAS-8926 - Road vehicles - Functional safety - Use of pre-existing software architectural elements
• ISO/SAE/DIS-21434 - Road vehicles - Cybersecurity engineering

Other SDOs:

• DIN-EN-ISO-15006 - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011)
• DIN-EN-ISO-15008 - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation
• EN-16072 - Intelligent transport systems - ESafety - Pan-European eCall operating requirements
• EN-16944 - Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements
• EN-50325-5 - Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5: Functional safety communication based on EN 50325-4
• EN-63005-1 - Event video data recorder for road vehicle accidents - Part 1: Basic requirements
• EN-IEC-63033-2 - Car multimedia systems and equipment - Drive monitoring system - Part 2: Recording methods of the drive monitoring system (IEC 63033-2:2018)
• EN-ISO-14823 - Intelligent transport systems - Graphic data dictionary
• EN-ISO-15005 - Road vehicles - Ergonomic aspects of transportation and control systems - Dialogue management principles and compliance procedures
• EN-ISO-15006 - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation
• EN-ISO-15007-1 - Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters
• EN-ISO-15008 - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation
• EN-ISO-18541-1 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition
• EN-ISO-18541-2 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements
• EN-ISO-18541-3 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements
• EN-ISO-18541-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test
• EN-ISO-18542-1 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012)
• EN-ISO-18542-2 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority
• PD-CEN-ISO-19321-TC - Tracked Changes. Intelligent transport systems. Cooperative ITS. Dictionary of in-vehicle information (IVI) data structures
• SIS-CEN-ISO/TS-14822-1 - Traffic and Travel Information - General specifications for medium-range pre-information via dedicated short-range communication - Part 1: Downlink (ISO/TS 14822-1:2006)
• SIS-CEN-ISO/TS-14823 - Traffic and travel information - Messages via media-independent stationary dissemination systems - Graphic data dictonary for pre-trip and in-trip information dissemination systems (ISO/TS 14823:2008, IDT)
• SIS-CEN-ISO/TS-14907-1 - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015)
• SIS-CEN-ISO/TS-14907-2 - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO/TS 14907-2:2016)
• SIS-CEN-ISO/TS-19321 - Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structures (ISO/TS 19321:2020)
• SIS-CEN/TR-16596 - Electric-electronic interface between chassis-cab and bodywork of refuse collection vehicles (RCVs)
• SIS-CEN/TS-13149-10 - Public transport - Road vehicle scheduling and control systems - Part 10: Location service
• SIS-CEN/TS-13149-11 - Public transport - Road vehicle scheduling and control systems - Part 11: Vehicle platform interface service
• SIS-CEN/TS-13149-7 - Public transport - Road vehicle scheduling and control systems - Part 7: System and network architecture
• SIS-CEN/TS-13149-8 - Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication
• SIS-CEN/TS-13149-9 - Public transport - Road vehicle scheduling and control systems - Part 9: Time service
• SIS-CEN/TS-15213-1 - Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Part 1: Reference architecture and terminology
• SIS-ISO-16951 - Road vehicles — Ergonomic aspects of transport information and control systems (TICS) — Procedures for determining priority of on-board messages presented to drivers (ISO/TS 16951:2021)
• SIS-ISO-20078-4 - Road vehicles - Extended vehicle (ExVe) web services - Part 4: Control
• SIS-ISO/PAS-5112 - Road vehicles — Guidelines for auditing cybersecurity engineering (ISO/PAS 5112:2022, IDT)
• SIS-ISO/TR-16352 - Road vehicles - Ergonomic aspects of in-vehicle presentation for transport information and control systems - Warning systems
• SIS-ISO/TR-20078-4 - Road vehicles — Extended vehicle (ExVe) web services — Part 4: Control (ISO/TR 20078-4:2021, IDT)
• SIS-ISO/TR-23786 - Road vehicles — Solutions for remote access to vehicle — Criteria for risk assessment (ISO/TR 23786:2019)
• SIS-ISO/TS-14198 - Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems (ISO/TS 14198:2019)
• SIS-ISO/TS-15007-2 - Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures (ISO/TS 15007-2:2014, IDT)
• SS-EN-15213-1 - Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 1: Reference architecture and terminology
• SS-EN-16072 - Intelligent transport systems - ESafety - Pan-European eCall operating requirements
• SS-EN-16944 - Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements
• SS-EN-933-6 - Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
• SS-EN-ISO-12813 - Electronic fee collection - Compliance check communication for autonomous systems (ISO 12813:2019)
• SS-EN-ISO-12813-AM1 - Electronic fee collection - Compliance check communication for autonomous systems - Amendment 1 (ISO 12813:2015/Amd 1:2017)
• SS-EN-ISO-13140-2 - Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO 13141 - Part 2: Abstract test suite (ISO 13140-2:2016)
• SS-EN-ISO-13141 - Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO 13141:2015)
• SS-EN-ISO-13141-AM1 - Electronic fee collection - Localisation augmentation communication for autonomous systems - Amendment 1 (ISO 13141:2015/Amd 1:2017)
• SS-EN-ISO-14823 - Intelligent transport systems - Graphic data dictionary (ISO 14823:2017)
• SS-EN-ISO-14907-1 - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO 14907-1:2020)
• SS-EN-ISO-14907-2 - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO 14907-2:2021)
• SS-EN-ISO-15005 - Road vehicles - Ergonomic aspects of transportation and control systems - Dialogue management principles and compliance procedures (ISO 15005:2017)
• SS-EN-ISO-15006 - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications for in-vehicle auditory presentation (ISO 15006:2011)
• SS-EN-ISO-15007-1 - Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014)
• SS-EN-ISO-15008 - Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation (ISO 15008:2017)
• SS-EN-ISO-16410-1 - Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1: Test suite structure and test purposes (ISO 16410-1:2017)
• SS-EN-ISO-17287 - Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving (ISO 17287:2003)
• SS-EN-ISO-17427-1 - Intelligent transport systems - Cooperative ITS - Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) (ISO 17427-1:2018)
• SS-EN-ISO-18541-1 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO 18541-1:2021)
• SS-EN-ISO-18541-2 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2021)
• SS-EN-ISO-18541-3 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2021)
• SS-EN-ISO-18541-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test (ISO 18541-4:2021)
• SS-EN-ISO-18541-5 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 5: Heavy duty specific provision (ISO 18541-5:2018)
• SS-EN-ISO-18541-6 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018)
• SS-EN-ISO-18542-1 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012)
• SS-EN-ISO-18542-2 - Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority (ISO 18542-2:2014)
• SS-ISO-10303-105 - Industrial automation systems and integration - Product data representation and exchange - Part 105: Integrated application resource: Kinematics
• SS-ISO-10681-1 - Road vehicles - Communication on FlexRay - Part 1: General information and use case definition (ISO 10681-1:2010, IDT)
• SS-ISO-10681-2 - Road vehicles - Communication on FlexRay - Part 2: Communication layer services (ISO 10681-2:2010, IDT)
• SS-ISO-11898-1 - Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling (ISO 11898-1:2015, IDT)
• SS-ISO-11898-2 - Road vehicles - Controller area network (CAN) - Part 2: High-speed medium access unit (ISO 11898-2:2016, IDT)
• SS-ISO-11898-3 - Road vehicles - Controller area network (CAN) - Part 3: Low-speed, fault-tolerant, medium-dependent interface (ISO 11898-3:2006, IDT)
• SS-ISO-11898-4 - Road vehicles - Controller area network (CAN) - Part 4: Time-triggered communication (ISO 11898-4:2004, IDT)
• SS-ISO-11898-5 - Road vehicles - Controller area network (CAN) - Part 5: High-speed medium access unit with low-power mode (ISO 11898-5:2007, IDT)
• SS-ISO-11898-6 - Road vehicles - Controller area network (CAN) - Part 6: High-speed medium access unit with selective wake-up functionality (ISO 11898-6:2013, IDT)
• SS-ISO-11992-1 - Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1: Physical and data-link layers (ISO 11992-1:2019, IDT)
• SS-ISO-11992-2 - Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2: Application layer for brakes and running gear (ISO 11992-2:2023, IDT)
• SS-ISO-11992-2-AM1 - Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear (ISO 11992-2:2003/Amd.1:2007, IDT)
• SS-ISO-11992-3 - Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 3: Application layer for equipment other than brakes and running gear (ISO 11992-3:2021, IDT)
• SS-ISO-11992-3-AM1 - Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 3: Application layer for equipment other than brakes and running gear (ISO 11992-3:2003/Amd 1:2008, IDT)
• SS-ISO-11992-4 - Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostic communication (ISO 11992-4:2023, IDT)
• SS-ISO-13209-2 - Road vehicles — Open Test sequence eXchange format (OTX) — Part 2: Core data model specification and requirements (ISO 13209-2:2022, IDT)
• SS-ISO-13209-3 - Road vehicles — Open Test sequence eXchange format (OTX) — Part 3: Standard extensions and requirements (ISO 13209-3:2022, IDT)
• SS-ISO-13209-4 - Road vehicles — Open Test sequence eXchange format (OTX) — Part 4: Expanded extensions interface definition (ISO 13209-4:2021, IDT)
• SS-ISO-14229-3 - Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diagnostic services on CAN implementation (UDSonCAN) (ISO 14229-3:2022, IDT)
• SS-ISO-15007 - Road vehicles - Measurement and analysis of driver visual behaviour with respect to transport information and control systems (ISO 15007:2020, IDT)
• SS-ISO-15075 - Transport information and control systems - In-vehicle navigation systems - Communications message set requirements
• SS-ISO-15765-1 - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 1: General information and use case definition (ISO 15765-1:2011, IDT)
• SS-ISO-15765-2 - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 2: Transport protocol and network layer services (ISO 15765-2:2016, IDT)
• SS-ISO-15765-3 - Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 3: Implementation of unified diagnostic services (UDS on CAN) (ISO 15765-3:2004, IDT)
• SS-ISO-15765-4 - Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems (ISO 15765-4:2021, IDT)
• SS-ISO-15765-4-AM1 - Road vehicles - Diagnostic communication over Controller Area Network (DoCAN) - Part 4: Requirements for emissions-related systems — Amendment 1 (ISO 15765-4:2011/Amd 1:2013, IDT)
• SS-ISO-15765-5 - Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 5: Specification for an in-vehicle network connected to the diagnostic link connector (ISO 15765-5:2023, IDT)
• SS-ISO-16673 - Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems (ISO 16673:2017, IDT)
• SS-ISO-16845 - Road vehicles - Controller area network (CAN) - Conformance test plan
• SS-ISO-16845-1 - Road vehicles - Controller area network (CAN) conformance test plan - Part 1: Data link layer and physical signalling (ISO 16845-1:2016, IDT)
• SS-ISO-16845-2 - Road vehicles - Controller area network (CAN) conformance test plan - Part 2: High-speed medium access unit - Conformance test plan (ISO 16845-2:2018, IDT)
• SS-ISO-17215-1 - Road vehicles - Video communication interface for cameras (VCIC) - Part 1: General information and use case definition (ISO 17215-1:2014, IDT)
• SS-ISO-17215-2 - Road vehicles - Video communication interface for cameras (VCIC) - Part 2: Service discovery and control (ISO 17215-2:2014, IDT)
• SS-ISO-17215-3 - Road vehicles — Video communication interface for cameras (VCIC) — Part 3: Camera message dictionary (ISO 17215-3:2021, IDT)
• SS-ISO-17215-4 - Road vehicles - Video communication interface for cameras (VCIC) - Part 4: Implementation of communication requirements (ISO 17215-4:2014, IDT)
• SS-ISO-17356-1 - Road vehicles - Open interface for embedded automotive applications - Part 1: General structure and terms, definitions and abbreviated terms (ISO 17356-1:2005, IDT)
• SS-ISO-17356-2 - Road vehicles - Open interface for embedded automotive applications - Part 2: OSEK/VDX specifications for binding OS, COM and NM (ISO 17356-2:2005, IDT)
• SS-ISO-17356-3 - Road vehicles - Open interface for embedded automotive applications - Part 3: OSEK/VDX Operating System (OS) (ISO 17356-3:2005, IDT)
• SS-ISO-17356-4 - Road vehicles - Open interface for embedded automotive applications - Part 4: OSEK/VDX Communication (COM) (ISO 17356-4:2005, IDT)
• SS-ISO-17356-5 - Road vehicles - Open interface for embedded automotive applications - Part 5: OSEK/VDX Network Management (NM) (ISO 17356-5:2006, IDT)
• SS-ISO-17356-6 - Road vehicles - Open interface for embedded automotive applications - Part 6: OSEK/VDX Implementation Language (OIL) (ISO 17356-6:2006, IDT)
• SS-ISO-17386 - Transport information and control systems - Manoeuvering Aids for Low Speed Operation (MALSO) - Performance requirements and test procedures (ISO 17386:2010, IDT)
• SS-ISO-17458-1 - Road vehicles - FlexRay communications system - Part 1: General information and use case definition (ISO 17458-1:2013, IDT)
• SS-ISO-17458-2 - Road vehicles - FlexRay communications system - Part 2: Data link layer specification (ISO 17458-2:2013, IDT)
• SS-ISO-17458-3 - Road vehicles - FlexRay communications system - Part 3: Data link layer conformance test specification (ISO 17458-3:2013, IDT)
• SS-ISO-17458-4 - Road vehicles - FlexRay communications system - Part 4: Electrical physical layer specification (ISO 17458-4:2013, IDT)
• SS-ISO-17458-5 - Road vehicles - FlexRay communications system - Part 5: Electrical physical layer conformance test specification (ISO 17458-5:2013, IDT)
• SS-ISO-17488 - Road vehicles - Transport information and control systems - Detection-response task (DRT) for assessing attentional effects of cognitive load in driving (ISO 17488:2016, IDT)
• SS-ISO-17987-1 - Road vehicles - Local Interconnect Network (LIN) - Part 1: General information and use case definition (ISO 17987-1:2016, IDT)
• SS-ISO-17987-2 - Road vehicles - Local Interconnect Network (LIN) - Part 2: Transport protocol and network layer services (ISO 17987-2:2016, IDT)
• SS-ISO-17987-4 - Road vehicles - Local Interconnect Network (LIN) - Part 4: Electrical physical layer (EPL) specification 12 V/24 V (ISO 17987-4:2016, IDT)
• SS-ISO-17987-6 - Road vehicles - Local Interconnect Network (LIN) - Part 6: Protocol conformance test specification (ISO 17987-6:2016, IDT)
• SS-ISO-17987-7 - Road vehicles - Local Interconnect Network (LIN) - Part 7: Electrical Physical Layer (EPL) conformance test specification (ISO 17987-7:2016, IDT)
• SS-ISO-17987-8 - Road vehicles - Local Interconnect Network (LIN) - Part 8: Electrical physical layer (EPL) specification: LIN over DC powerline (DC-LIN) (ISO 17987-8:2019, IDT)
• SS-ISO-18682 - Intelligent transport systems - External hazard detection and notification systems - Basic requirements (ISO 18682:2016, IDT)
• SS-ISO-20078-1 - Road vehicles — Extended vehicle (ExVe) web services — Part 1: Content and definitions (ISO 20078-1:2021, IDT)
• SS-ISO-20078-2 - Road vehicles — Extended vehicle (ExVe) web services — Part 2: Access (ISO 20078-2:2021, IDT)
• SS-ISO-20078-3 - Road vehicles — Extended vehicle (ExVe) web services — Part 3: Security (ISO 20078-3:2021, IDT)
• SS-ISO-20794-2 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 2: Application layer (ISO 20794-2:2020, IDT)
• SS-ISO-20794-3 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 3: Transport and network layer (ISO 20794-3:2020, IDT)
• SS-ISO-20794-4 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 4: Data link layer and physical layer (ISO 20794-4:2020, IDT)
• SS-ISO-20794-5 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 5: Application layer conformance test plan (ISO 20794-5:2020, IDT)
• SS-ISO-20794-6 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 6: Transport and network layer conformance test plan (ISO 20794-6:2020, IDT)
• SS-ISO-20794-7 - Road vehicles - Clock extension peripheral interface (CXPI) - Part 7: Data link and physical layer conformance test plan (ISO 20794-7:2020, IDT)
• SS-ISO-21806-1 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 1: General information and definitions (ISO 21806-1:2020, IDT)
• SS-ISO-21806-10 - Road vehicles – Media Oriented Systems Transport (MOST) – Part 10: 150-Mbit/s coaxial physical layer (ISO 21806-10:2021, IDT)
• SS-ISO-21806-11 - Road vehicles – Media Oriented Systems Transport (MOST) – Part 11: 150-Mbit/s coaxial physical layer conformance test plan (ISO 21806-11:2021, IDT)
• SS-ISO-21806-12 - Road vehicles – Media Oriented Systems Transport (MOST) – Part 12: 50-Mbit/s balanced media physical layer (ISO 21806-12:2021, IDT)
• SS-ISO-21806-13 - Road vehicles – Media Oriented Systems Transport (MOST) – Part 13: 50-Mbit/s balanced media physical layer conformance test plan (ISO 21806-13:2021, IDT)
• SS-ISO-21806-14 - Road vehicles – Media Oriented Systems Transport (MOST) – Part 14: Lean application layer (ISO 21806-14:2021, IDT)
• SS-ISO-21806-15 - Road vehicles – Media Oriented Systems Transport (MOST) – Part 15: Lean application layer conformance test plan (ISO 21806-15:2021, IDT)
• SS-ISO-21806-2 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 2: Application layer (ISO 21806-2:2020, IDT)
• SS-ISO-21806-3 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 3: Application layer conformance test plan (ISO 21806-3:2020, IDT)
• SS-ISO-21806-4 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 4: Transport layer and network layer (ISO 21806-4:2020, IDT)
• SS-ISO-21806-5 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 5: Transport layer and network layer conformance test plan (ISO 21806-5:2020, IDT)
• SS-ISO-21806-6 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 6: Data link layer (ISO 21806-6:2020, IDT)
• SS-ISO-21806-7 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 7: Data link layer conformance test plan (ISO 21806-7:2020, IDT)
• SS-ISO-21806-8 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 8: 150-Mbit/s optical physical layer (ISO 21806-8:2020, IDT)
• SS-ISO-21806-9 - Road vehicles - Media Oriented Systems Transport (MOST) - Part 9: 150-Mbit/s optical physical layer conformance test plan (ISO 21806-9:2020, IDT)
• SS-ISO-21956 - Road vehicles - Ergonomics aspects of transport information and control systems - Human machine interface specifications for keyless ignition systems (ISO 21956:2019, IDT)
• SS-ISO-22178 - Intelligent transport systems - Low speed following (LSF) systems - Performance requirements and test procedures (ISO 22178:2009, IDT)
• SS-ISO-22179 - Intelligent transport systems - Full speed range adaptive cruise control (FSRA) systems - Performance requirements and test procedures (ISO 22179:2009, IDT)
• SS-ISO-22840 - Intelligent transport systems - Devices to aid reverse manoeuvres - Extended-range backing aid systems (ERBA) (ISO 22840:2010, IDT)
• SS-ISO-22900-1 - Road vehicles - Modular vehicle communication interface (MVCI) - Part 1: Hardware design requirements (ISO 22900-1:2008, IDT)
• SS-ISO-22900-2 - Road vehicles — Modular vehicle communication interface (MVCI) — Part 2: Diagnostic protocol data unit (D-PDU API) (ISO 22900-2:2022, IDT)
• SS-ISO-22900-3 - Road vehicles - Modular vehicle communication interface (MVCI) - Part 3: Diagnostic server application programming interface (D-Server API) (ISO 22900-3:2012, IDT)
• SS-ISO-22902-1 - Road vehicles - Automotive multimedia interface - Part 1: General technical overview (ISO 22902-1:2006, IDT)
• SS-ISO-22902-2 - Road vehicles - Automotive multimedia interface - Part 2: Use cases (ISO 22902-2:2006, IDT)
• SS-ISO-22902-3 - Road vehicles - Automotive multimedia interface - Part 3: System requirements (ISO 22902-3:2006, IDT)
• SS-ISO-22902-4 - Road vehicles - Automotive multimedia interface - Part 4: Network protocol requirements for vehicle interface access (ISO 22902-4:2006, IDT)
• SS-ISO-22902-5 - Road vehicles - Automotive multimedia interface - Part 5: Common message set (ISO 22902-5:2006, IDT)
• SS-ISO-22902-6 - Road vehicles - Automotive multimedia interface - Part 6: Vehicle interface requirements (ISO 22902-6:2006, IDT)
• SS-ISO-22902-7 - Road vehicles - Automotive multimedia interface - Part 7: Physical specification (ISO 22902-7:2006, IDT)
• SS-ISO-23132 - Road vehicles - Extended Vehicle (ExVe) time critical applications - General requirements, definitions and classification methodology of time-constrained situations related to Road and ExVe Safety (RExVeS) (ISO 23132:2020, IDT)
• SS-ISO-23150 - Road vehicles — Data communication between sensors and data fusion unit for automated driving functions — Logical interface (ISO 23150:2023, IDT)
• SS-ISO-23239-1 - Road vehicles — Vehicle domain service (VDS) — Part 1: General information and use case definitions (ISO 23239-1:2021, IDT)
• SS-ISO-26022 - Road vehicles - Ergonomic aspects of transport information and control systems - Simulated lane change test to assess in-vehicle secondary task demand (ISO 26022:2010, IDT)
• SS-ISO/SAE-21434 - Road vehicles — Cybersecurity engineering (ISO/SAE 21434:2021, IDT)
• UNE-EN-15722 - Intelligent transport systems - ESafety - ECall minimum set of data
• UNE-EN-1591-1 - Intelligent transport systems - ESafety - ECall minimum set of data
• UNE-EN-ISO-18541-4 - Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test