Document Center List of Standards on Braking Systems
ICS Code 43.040.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D4999 - Test Method for Evaluating of Wet, Bronze-Faced, Friction Brakes (Withdrawn 1995)
- ASTM-F1649 - Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
- ASTM-F377 - Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
BSI:
- BS-5409-1 - Specification for nylon tubing
- BS-5409-2 - Specification for nylon tubing. Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry
- BS-AU-180-2 - Brake linings. Method for measurement of internal shear strength of lining material
- BS-AU-229 - Specification for Graphical Symbols To Designate Brake Fluid Types in Road Vehicles
- BS-ISO-11157 - Road vehicles. Brake lining assemblies. Inertia dynamometer test method
- BS-ISO-12161 - Road vehicles. Endurance braking systems of motor vehicles and towed vehicles. Test procedures
- BS-ISO-13486-1 - Road vehicles. Hydraulic braking systems
- BS-ISO-15484 - Road vehicles. Brake lining friction materials. Product Definition and quality assurance
- BS-ISO-1728 - Road vehicles. Pneumatic braking connections between motor vehicles and towed vehicles. Interchangeability
- BS-ISO-20901 - Intelligent transport systems. Emergency electronic brake light systems (EEBL). Performance requirements and test procedures
- BS-ISO-20918 - Road vehicles. Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems. Test with roller brake tester
- BS-ISO-21069-1 - Road vehicles. Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester
- BS-ISO-21069-2 - Road vehicles. Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester
- BS-ISO-21994 - Passenger cars. Stopping distance at straight-line braking with ABS. Open-loop test method
- BS-ISO-21995 - Road vehicles. Test of vehicle air braking systems with a permissible mass of over 3,5 t. Acquisition and use of reference values using a roller brake tester
- BS-ISO-22574 - Road vehicles. Brake linings friction materials. Visual inspection
- BS-ISO-22733-1 - Road vehicles Test method to evaluate the performance of autonomous emergency braking systems
- BS-ISO-22733-2 - Road vehicles. Test method to evaluate the performance of autonomous emergency braking systems
- BS-ISO-26865 - Road vehicles. Brake lining friction materials. Standard performance test procedure for commercial vehicles with air brakes
- BS-ISO-26866 - Road vehicles. Brake lining friction materials. Standard wear test procedure for commercial vehicles with air brakes
- BS-ISO-26867 - Road vehicles. Brake lining friction materials. Friction behaviour assessment for automotive brake systems
- BS-ISO-27667 - Road vehicles. Brake lining friction materials. Evaluation of corrosion effects on painted backing plates and brake shoes
- BS-ISO-4926 - Road vehicles. Hydraulic braking systems. Non-petroleum-based reference fluid
- BS-ISO-4927 - Road vehicles. Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120C max.)
- BS-ISO-4928 - Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120C max.)
- BS-ISO-4930 - Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150C max.)
- BS-ISO-6117 - Road vehicles. Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 C max.)
- BS-ISO-6118 - Road vehicles. Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70C max.)
- BS-ISO-6310 - Road vehicles. Brake linings. Compressive strain test methods
- BS-ISO-6312 - Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies
- BS-ISO-7628 - Road vehicles. Thermoplastics tubing for air braking systems
- BS-ISO-7634 - Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures
- BS-ISO-7635 - Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures
- BS-ISO-7638-1 - Road vehicles. Connectors for the electrical connection of towing and towed vehicles
- BS-ISO-7638-2 - Road vehicles. Connectors for the electrical connection of towing and towed vehicles
- BS-ISO-9128 - Road vehicles. Graphical symbols to designate brake fluid types
- DD-ISO/PAS-22574 - Road vehicles. Brake linings friction materials. Visual inspection
- PD-ISO-PAS-22596 - Road vehicles. Brake lining friction materials. Dynamometer metal pick-up generation procedure for disc brakes
- PD-ISO/PAS-5101 - Road vehicles. Field load specification for brake actuation and modulation systems
ISO:
- ISO-11157 - Road vehicles - Brake lining assemblies - Inertia dynamometer test method
- ISO-11835 - Road Vehicles - Motor Vehicles With Antilock Braking Systems(Abs) - Measurement of Brakin
- ISO-12161 - Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures
- ISO-12364 - Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods
- ISO-13486-1 - Road vehicles -- Hydraulic braking systems -- Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
- ISO-13487 - Braking of road vehicles - Considerations on the definition of mean fully developed deceleration
- ISO-15484 - Road vehicles - Brake lining friction materials - Product definition and quality assurance
- ISO-1728 - Road vehicles - Pneumatic braking connections between motor vehicles and towed vehicles - Interchangeability
- ISO-20901 - Intelligent transport systems - Emergency electronic brake light systems (EEBL) - Performance requirements and test procedures
- ISO-20918 - Road vehicles - Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems - Test with roller brake tester
- ISO-21069-1 - Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester - Part 1: Pneumatic braking systems
- ISO-21069-2 - Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester - Part 2: Air over hydraulic and purely hydraulic braking systems
- ISO-21994 - Passenger cars - Stopping distance at straight-line braking with ABS - Open-loop test method
- ISO-21995 - Road vehicles - Test of vehicle air braking systems with a permissible mass of over 3,5 t - Acquisition and use of reference values using a roller brake tester
- ISO-22574 - Road vehicles - Brake linings friction materials - Visual inspection
- ISO-22733-1 - Road vehicles - Test method to evaluate the performance of autonomous emergency braking systems - Part 1: Car-to-car
- ISO-22733-2 - Road vehicles - Test method to evaluate the performance of autonomous emergency braking systems - Part 2: Car to pedestrian
- ISO-26865 - Road vehicles - Brake lining friction materials - Standard performance test procedure for commercial vehicles with air brakes
- ISO-26866 - Road vehicles - Brake lining friction materials - Standard wear test procedure for commercial vehicles with air brakes
- ISO-26867 - Road vehicles - Brake lining friction materials - Friction behaviour assessment for automotive brake systems
- ISO-27667 - Road vehicles - Brake lining friction materials - Evaluation of corrosion effects on painted backing plates and brake shoes
- ISO-3583 - Road vehicles - Pressure test connection for compressed-air pneumatic braking equipment
- ISO-3803 - Road vehicles - Hydraulic pressure test connection for braking equipment
- ISO-3871 - Road vehicles - Labelling of containers for petroleum-based or non-petroleum-based brake fluid
- ISO-3996 - Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
- ISO-4038 - Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings
- ISO-4039-1 - Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface
- ISO-4039-2 - Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and holes with conical sealing surface
- ISO-4925 - Road vehicles - Specification of non-petroleum-based brake fluids for hydraulic systems
- ISO-4926 - Road vehicles - Hydraulic braking systems - Non-petroleum-based reference fluid
- ISO-4927 - Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
- ISO-4928 - Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
- ISO-4929 - Road vehicles - Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
- ISO-4930 - Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
- ISO-611 - Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary
- ISO-6117 - Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
- ISO-6118 - Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
- ISO-6119 - Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
- ISO-6120 - Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
- ISO-6310 - Road vehicles - Brake linings - Compressive strain test methods
- ISO-6311 - Road vehicles - Brake linings - Internal shear strength of lining material - Test procedure
- ISO-6312 - Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
- ISO-6313 - Road vehicles - Brake linings - Effects of heat on dimensions and form of disc brake pads - Test procedure
- ISO-6314 - Road vehicles - Brake linings - Resistance to water, saline solution, oil and brake fluid - Test procedure
- ISO-6315 - Road vehicles - Brake linings - Seizure to ferrous mating surface due to corrosion - Test procedure
- ISO-6597 - Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures
- ISO-6786 - Road vehicles - Air braking systems - Identification of connections on units
- ISO-7308 - Road vehicles - Petroleum-based brake-fluid for stored-energy hydraulic brakes
- ISO-7309 - Road vehicles - Hydraulic braking systems - ISO reference petroleum base fluid
- ISO-7375-1 - Road vehicles - Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles - Part 1 : Dimensions
- ISO-7375-2 - Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements
- ISO-7628 - Road vehicles - Thermoplastics tubing for air braking systems
- ISO-7628-1 - Road vehicles - Thermoplastics tubing for use in air braking systems - Part 1: Dimensions and marking
- ISO-7628-2 - Corrigendum
- ISO-7629 - Road vehicles - Brake linings - Disc brake pads - Evaluation of surface and material flaws after testing
- ISO-7630 - Road vehicles - Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- ISO-7631 - Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- ISO-7632 - Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- ISO-7633 - Road vehicles - Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- ISO-7634 - Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions - Test procedures
- ISO-7635 - Road vehicles - Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions - Test procedures
- ISO-7638-1 - Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage
- ISO-7638-2 - Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage
- ISO-7642 - Caravans and light trailers - Trailers of categories 01 and 02 with overrun brakes - Inertia bench test methods for brakes
- ISO-7643 - Caravans and light trailers - Trailers of categories 01 and 02 with overrun brakes - Linear bench test methods for brake controls
- ISO-9128 - Road vehicles - Graphical symbols to designate brake fluid types
- ISO/PAS-12158 - Road vehicles - Braking systems - Temperature measuring methods
- ISO/PAS-22574 - Road vehicles - Brake linings frictions materials - Visual inspection
- ISO/PAS-22596 - Road vehicles - Brake lining friction materials - Dynamometer metal pick-up generation procedure for disc brakes
- ISO/PAS-5101 - Road vehicles - Field load specification for brake actuation and modulation systems
Other SDOs:
- JIS-D-2604 - Automotive parts -- Hydraulic brake wheel cylinders for hydraulic brake systems using a non-petroleum base brake fluid
- JIS-D-2605 - Automotive parts -- Rubber cups for hydraulic braking cylinders using a non-petroleum base hydraulic brake fluid
- JIS-D-2608 - Automotive parts -- Rubber boots for hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid
- JIS-D-4413 - Automotive parts -- Brake linings and brake pads -- Compressive strain test method
- SIS-ISO/PAS-12158 - Road vehicles - Braking systems - Temperature measuring methods
- SIS-ISO/PAS-22574 - Road vehicles - Brake linings frictions materials - Visual inspection
- SIS-ISO/PAS-22596 - Road vehicles Brake lining friction materials Dynamometer metal pick-up generation procedure for disc brakes (ISO/PAS 22596:2022, IDT)
- SIS-ISO/PAS-5101 - Road vehicles Field load specification for brake actuation and modulation systems (ISO/PAS 5101:2021, IDT)
- SMS-2982 - Automobiles. Brakes. Determination of deceleration
- SMS-ISO-2890 - Road vehicles - Vacuum braking for caravans and light trailers
- SMS-ISO-3162 - Caravans and light trailers - Couplings for vacuum braking systems - Dimensional characteristics
- SMS-ISO-3854 - Road vehicles - Caravans and light trailers - Vacuum braking - Measurement of reaction time
- SMS-ISO-3871 - Road vehicles - Labelling of containers for brakefluid or mineral oil for hydraulic systems
- SS-123 - Indexable inserts - Designation system
- SS-3658 - Road vehicles - Braking compatibility of heavy commercial vehicle combinations with pneumatic braking systems - Testing with roller brake tester
- SS-EN-17003 - Road vehicles - Roller brake testers for vehicles of more than 3,5 tons GVW - Safety requirements
- SS-ISO-11157 - Road vehicles - Brake lining assemblies performance - Inertia dynamometer test method (ISO 11157:2005, IDT)
- SS-ISO-11835 - Road vehicles - Motor vehicles with antilock braking systems (ABS) - Measurement of braking performance
- SS-ISO-12161 - Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures (ISO 12161:2006, IDT)
- SS-ISO-13486-1 - Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
- SS-ISO-15484 - Road vehicles - Brake lining friction materials - Product definition and quality assurance (ISO 15484:2008, IDT)
- SS-ISO-1728 - Road vehicles - Pneumatic braking connections between motor vehicles and towed vehicles - Interchangeability (ISO 1728:2006, IDT)
- SS-ISO-20918 - Road vehicles - Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems - Test with roller brake tester (ISO 20918:2007, IDT)
- SS-ISO-21069-1 - Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester - Part 1: Pneumatic braking systems (ISO 21069-1:2004, IDT)
- SS-ISO-21069-2 - Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester - Part 2: Air over hydraulic and purely hydraulic braking systems (ISO 21069-2, IDT)
- SS-ISO-21994 - Passenger cars Stopping distance at straight-line braking with ABS Open-loop test method (ISO 21994:2022, IDT)
- SS-ISO-21995 - Road vehicles - Test of vehicle air braking systems with a permissible mass of over 3,5 t - Acquisition and use of reference values using a roller brake tester (ISO 21995:2008, IDT)
- SS-ISO-22574 - Road vehicles Brake linings friction materials Visual inspection (ISO 22574:2023, IDT)
- SS-ISO-22733-1 - Road vehicles Test method to evaluate the performance of autonomous emergency braking systems Part 1: Car-to-car (ISO 22733-1:2022, IDT)
- SS-ISO-22733-2 - Road vehicles Test method to evaluate the performance of autonomous emergency braking systems Part 2: Car to pedestrian (ISO 22733-2:2023, IDT)
- SS-ISO-26865 - Road vehicles - Brake lining friction materials - Standard performance test procedure for commerical vehicles with air brakes (ISO 26865:2009, IDT)
- SS-ISO-26867 - Road vehicles - Brake lining friction materials - Friction behaviour assessment for automative brake systems (ISO 26867:2009, IDT)
- SS-ISO-3387 - Rubber - Determination of crystallization effects by hardness measurements (ISO 3387:2020, IDT)
- SS-ISO-3583 - Road vehicles - Pressure test connection for compressed-air pneumatic braking equipment
- SS-ISO-3803 - Road vehicles - Hydraulic pressure test connection for braking equipment
- SS-ISO-3871 - Road vehicles - Labelling of containers for petroleum-based or non-petroleum-based brake fluid
- SS-ISO-3996 - Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base hydraulic fluid (ISO 3996:1995, IDT)
- SS-ISO-4038 - Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings
- SS-ISO-4039 - Road vehicles - Pneumatic braking systems - Pipes, tapped holes and male fittings
- SS-ISO-4039-1 - Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface
- SS-ISO-4039-2 - Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface
- SS-ISO-4055 - Road vehicles - Caravans and light trailers - Electromagnetic braking
- SS-ISO-4925 - Road vehicles - Specification of non-petroleum-based brake fluids for hydraulic systems (ISO 4925:2020, IDT)
- SS-ISO-4926 - Road vehicles - Hydraulic braking systems - Non-petroleum-based reference fluid (ISO 4926:2020, IDT)
- SS-ISO-4927 - Road vehicles - Elastomeric boots for cylinders, drum type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) (ISO 4927:2005, IDT)
- SS-ISO-4928 - Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max) (ISO 4928:2006, IDT)
- SS-ISO-4929 - Road vehicles - Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
- SS-ISO-4930 - Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 oC max) (ISO 4930:2006, IDT)
- SS-ISO-611 - Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary
- SS-ISO-6117 - Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 oC max.) (ISO 6117:2005, IDT)
- SS-ISO-6118 - Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees Celsius max) (ISO 6118:2006, IDT)
- SS-ISO-6119 - Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max) (ISO 6119:2006, IDT)
- SS-ISO-6310 - Road vehicles - Brake linings - Compressive strain test method (ISO 6310:2009, IDT)
- SS-ISO-6311 - Road vehicles - Brake linings - Internal shear strength of lining material - Test procedure
- SS-ISO-6312 - Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies (ISO 6312:2010, IDT)
- SS-ISO-6313 - Road vehicles - Brake linings - Effects of heat on dimensions and form of disc brake pads - Test procedure
- SS-ISO-6314 - Road vehicles - Brake linings - Resistance to water, saline solution, oil and brake fluid - Test procedure
- SS-ISO-6315 - Road vehicles - Brake linings - Seizure to ferrous mating surface due to corrosion - Test procedures
- SS-ISO-6597 - Road vehicles - Hydraulic braking systems including those with electronic control functions, for motor vehicles - Test procedures (ISO 6597:2005, IDT)
- SS-ISO-6786 - Road vehicles - Air braking systems - Identification of connections on units (ISO 6786:1980, IDT)
- SS-ISO-7308 - Road vehicles - Petroleum-based brake-fluid for stored-energy hydraulic brakes
- SS-ISO-7309 - Road vehicles - Hydraulic braking systems - ISO reference petroleum base fluid
- SS-ISO-7375-2 - Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements
- SS-ISO-7628 - Road vehicles - Thermoplastics tubing for air braking systems (ISO 7628:2010, IDT)
- SS-ISO-7628-2 - Road vehicles - Thermoplastics tubing for air braking system - Part 2: Mounting on vehicle and test methods
- SS-ISO-7629 - Road vehicles - Brake linings - Disc brake pads -Evaluation of surface and material flaws after testing
- SS-ISO-7630 - Road vehicles - Elastomeric O-rings for hydraulicdrum brake wheel cylinders using a petroleum basehydraulic brake fluid (service temperature 120 degrees C max.)
- SS-ISO-7631 - Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max)
- SS-ISO-7632 - Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
- SS-ISO-7634 - Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions - Test procedures (ISO 7634:2007, IDT)
- SS-ISO-7635 - Road vehicles - Air and air/hydraulic braking systems of motor vehicles. including those with electronic control functions - Test procedures (ISO 7635:2006, IDT)
- SS-ISO-7638 - Road vehicles - Brake anti-lock device connector
- SS-ISO-7638-1 - Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage (ISO 7638-1:2018, IDT)
- SS-ISO-7638-2 - Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage (ISO 7638-2:2018, IDT)
- SS-ISO-7643 - Caravans and light trailers - Trailers of categories O1 and O2 with overrun brakers - Linear bench test methods for brake controls
- SS-ISO-7652 - Road vehicles - Base-mounted air compressors, single cylinder V-belt drive - Mounting dimensions
- SS-ISO-7881 - Road vehicles - Brake linings - Evaluation of friction material characteristics - Small sample bench test procedure
- SS-ISO-7975 - Passenger cars - Braking in a turn - Open-loop test method (ISO 7975:2019, IDT)
- SS-ISO-8703 - Road vehicles - Caravans and light trailers - Control device for inertia braking - Calculation of forces
- SS-ISO-9128 - Road vehicles - Graphical symbols to designate brake fluid types (ISO 9128:2006, IDT)