Document Center List of Standards on Bodies And Body Components Including Vehicle Frame And Structure, Heating Devices, Air-Conditioning Systems For Passenger/Driver Compartments, Roof Load Carriers, Etc. Loading Compartments, See 43.080.10
ICS Code 43.040.60
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-A1103 - Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
- ASTM-D5132 - Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
- ASTM-D5446 - Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints
- ASTM-D6266 - Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
- ASTM-D6476 - Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
- ASTM-D6478 - Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
- ASTM-D6479 - Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
- ASTM-D6675 - Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
- ASTM-D7356 - Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
- ASTM-E2574 - Standard Test Method for Fire Testing of School Bus Seat Assemblies
- ASTM-F851 - Standard Test Method for Self-Rising Seat Mechanisms
BSI:
- BS-10125 - Automotive services. Vehicle damage repair processes. Specification
- BS-10125-TC - Tracked Changes. Automotive services. Vehicle damage repair processes. Specification
- BS-6109-2 - Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for passenger lifts and ramps
- BS-AU-168 - Method for determination of the windscreen fogging characteristics of organic trim materials in motor vehicles
- BS-AU-209-0 - Vehicle security
- BS-AU-209-1A - Vehicle security
- BS-AU-209-2 - Vehicle security
- BS-AU-209-5B - Vehicle security
- BS-AU-209-6A - Vehicle security
- BS-AU-209-7 - Vehicle security
- BS-AU-210-1 - Drawbars for caravans and light trailers. Method of calculation for the mechanical strength of steel drawbars
- BS-EN-50408 - Household and similar electrical appliances. Safety. Particular requirements for cab heaters for vehicles
- BS-EN-624 - Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
- BS-EN-721 - Leisure accommodation vehicles. Safety ventilation requirements
- BS-ISO-11155-2 - Road vehicles. Air filters for passenger compartments
- BS-ISO-13043 - Road vehicles. Refrigerant systems used in mobile air conditioning systems (MAC). Safety requirements
- BS-ISO-13837 - Road vehicles. Safety glazing materials. Method for the determination of solar transmittance
- BS-ISO-13837-TC - Tracked Changes. Road vehicles. Safety glazing materials. Method for the determination of solar transmittance
- BS-ISO-6452 - Rubber- or plastics-coated fabrics. Determination of fogging characteristics of trim materials in the interior of automobiles
- BS-ISO-6452-TC - Tracked Changes. Rubber- or plastics-coated fabrics. Determination of fogging characteristics of trim materials in the interior of automobiles
- BS-ISO-6549 - Road vehicles. Procedure for H- and R-point determination
- BS-ISO-8066-3 - Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification
- DD-ISO-11155-2 - Road Vehicles, Air Filters for Passenger Compartments, Test for Gaseous Filtration
- DD-ISO/PAS-11154 - Road vehicles. Roof load carriers
- PAS-125 - Automotive services. Specification for vehicle damage repair processes
- PAS-62 - Refrigerated transport. Procedure for determining performance and calculating energy efficiency
ISO:
- ISO-11154 - Road vehicles - Roof load carriers
- ISO-11154-1 - Road vehicles - Roof load carriers - Part 1: Roof bars
- ISO-11154-4 - Road vehicles -- Roof load carriers -- Part 4: Magnetic fixing devices
- ISO-11155-1 - Road vehicles - Air filters for passenger compartments - Part 1: Test for particulate filtration
- ISO-11155-2 - Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration
- ISO-13043 - Road vehicles - Refrigerant systems used in mobile air conditioning systems (MAC) - Safety requirements
- ISO-13837 - Road vehicles - Safety glazing materials - Method for the determination of solar transmittance
- ISO-3208 - Road vehicles - Evaluation of protrusions inside passenger cars
- ISO-3832 - Passenger cars - Luggage compartments - Method of measuring reference volume
- ISO-6452 - Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles
- ISO-8066-1 - Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 1: Refrigerant 12
- ISO-8066-2 - Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 2: Refrigerant 134a
- ISO-8066-3 - Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 3: Refrigerant 1234yf
- ISO/PAS-11154 - Road vehicles - Roof load carriers
Other SDOs:
- DIN-EN-624/A2 - Specification for Dedicated Lpg Appliances - Room Sealed Lpg Space Heating Equipment F
- DIN-EN-721 - Leisure Accommodation Vehicles, Safety Ventilation Requirements
- EN-50408 - Household and similar electrical appliances - Safety - Particular requirements for cab heaters for vehicles
- EN-624 - Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
- EN-624/A2 - Specification for Dedicated Lpg Appliances - Room Sealed Lpg Space Heating Equipment F
- EN-721 - Leisure Accommodation Vehicles, Safety Ventilation Requirements
- JIS-D-4606 - Head restraints for automobile occupants
- SIS-ISO/PAS-11154 - Road vehicles - Roof load carriers
- SMS-2470 - Motor cars. Anchorages for seat belts
- SMS-2471 - Automobiles. Anchorages for seat belts. Strength requirements and testing
- SMS-ISO-3208 - Road vehicles - Evaluation of protrusions inside passenger cars
- SMS-ISO-3409 - Passengers cars - Lateral spacing of foot controls
- SMS-ISO-3536-1 - Road vehicles - Safety glasses - Vocabulary - Part 1
- SMS-ISO-3537 - Road vehicles - Safety glasses - Test methods formechanical properties
- SMS-ISO-3917 - Road vehicles - Safety glasses - Test methods forresistance to radiation, high temperature, humidity and fire
- SS-EN-624 - Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
- SS-EN-624-AM2 - Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
- SS-EN-721 - Leisure accommodation vehicles - Safety ventilation requirements
- SS-ISO-11154-1 - Road vehicles - Roof load carriers - Part 1: Roofbars
- SS-ISO-11155-2 - Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration (ISO 11155-2:2009, IDT)
- SS-ISO-12097-2 - Road vehicles - Airbag components - Part 2: Testing of airbag modules
- SS-ISO-13043 - Road vehicles - Refrigerant systems used in mobile air conditioning systems (MAC) - Safety requirements (ISO 13043:2011, IDT)
- SS-ISO-13215-2 - Road vehicles Reduction of misuse risk of child restraint systems Part 2: Requirements and test procedures for correct installation (panel method) (ISO 13215-2:2022, IDT)
- SS-ISO-13215-3 - Road vehicles Reduction of misuse risk of child restraint systems Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA) (ISO 13215-3:2022, IDT)
- SS-ISO-13837 - Road vehicles Safety glazing materials Method for the determination of solar transmittance (ISO 13837:2021, IDT)
- SS-ISO-15082 - Road vehicles Tests for rigid plastic safety glazing materials (ISO 15082:2016, IDT)
- SS-ISO-3468 - Passenger cars - Windscreen defrosting and demisting systems - Test method (ISO 3468:2014, IDT)
- SS-ISO-3470 - Passenger cars - Windscreen demisting systems - Test method
- SS-ISO-3536 - Road vehicles - Safety glazing materials - Vocabulary (ISO 3536:2016, IDT)
- SS-ISO-3537 - Road vehicles - Safety glazing materials - Mechanical tests (ISO 3537, IDT)
- SS-ISO-3538 - Road vehicles - Safety glazing materials - Test methods for optical properties (ISO 3538:1997, IDT)
- SS-ISO-3832 - Passenger cars - Luggage compartments - Method of measuring reference volume (ISO 3832:2002, IDT)
- SS-ISO-3917 - Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering (ISO 3917:2016, IDT)
- SS-ISO-5740 - Road vehicles - Rear-view mirrors - Test method for determining reflectance
- SS-ISO-5897 - Passenger cars - Rear-window demisting system - Test method
- SS-ISO-5898 - Passenger cars - Rear-window defrosting system - Test method
- SS-ISO-6255 - Passenger cars - Rear-window washing and wiping systems - Test methods
- SS-ISO-6452 - Rubber- or plastics-coated fabrics Determination of fogging characteristics of trim materials in the interior of automobiles (ISO 6452:2021, IDT)
- SS-ISO-6549 - Road vehicles - Procedure for H- and R-point determination
- SS-ISO-7803 - Commercial road vehicles - Steering ball joints
- SS-ISO-8066-2 - Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 2: Refrigerant 134a
- SS-ISO-8066-3 - Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 3: Refrigerant 1234yf (ISO 8066-3:2020, IDT)
- SS-ISO-9133 - Passenger cars - Engine cooling systems - Threaded pressure caps and their seats on filler necks
- SS-ISO-9258 - Passenger cars - Wiper systems - Wiper blade length