Document Center List of Standards on Crash Protection And Restraint Systems Including Airbags, Safety Belts, Traffic Accident Issues And Safety Enhancement Matters
ICS Code 43.040.80
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D5427 - Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
- ASTM-D5428 - Standard Practice for Evaluating the Performance of Inflatable Restraint Modules
- ASTM-D5645 - Standard Test Methods for Determining Physical Properties of Inflatable Restraint Cushions (Withdrawn 1999)
- ASTM-D5807 - Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
- ASTM-D6799 - Standard Terminology Relating to Inflatable Restraints
- ASTM-D7257 - Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018)
- ASTM-D7559 - Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions
- ASTM-F2640 - Standard Consumer Safety Specification for Booster Seats
BSI:
- BS-EN-ISO-14451-1 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-10 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-2 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-3 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-4 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-5 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-6 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-7 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-8 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-EN-ISO-14451-9 - Pyrotechnic articles. Pyrotechnic articles for vehicles
- BS-ISO-10542-1 - Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems
- BS-ISO-10542-2 - Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems
- BS-ISO-13215-1 - Road vehicles. Reduction of misuse risk of child restraint systems
- BS-ISO-13215-2 - Road vehicles. Reduction of misuse risk of child restraint systems
- BS-ISO-13215-2-TC - Tracked Changes. Road vehicles Reduction of misuse risk of child restraint systems
- BS-ISO-13215-3-TC - Tracked Changes. Road vehicles. Reduction of misuse risk of child restraint systems
- BS-ISO-13216-1 - Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems
- BS-ISO-13216-2 - Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems
- BS-ISO-13216-3 - Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems
- BS-ISO-13216-3-TC - Tracked Changes. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems
- BS-ISO-13216-4 - Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems
- BS-ISO-14513 - Road vehicles. Pedestrian protection. Head impact test method
- BS-ISO-14513-TC - Tracked Changes. Road vehicles. Pedestrian protection. Head impact test method
- BS-ISO-17373 - Road vehicles. Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
- BS-ISO-19237 - Intelligent transport systems. Pedestrian detection and collision mitigation systems (PDCMS). Performance requirements and test procedures
- BS-ISO-21750 - Road vehicles. Safety enhancement in conjunction with tyre inflation pressure monitoring
- BS-ISO-22078 - Intelligent transport systems. Bicyclist detection and collision mitigation systems (BDCMS). Performance requirements and test procedures
- BS-ISO-22896 - Road vehicles. Deployment and sensor bus for occupant safety systems
- BS-ISO-23376 - Intelligent transport systems. Vehicle-to-vehicle intersection collision warning systems (VVICW). Performance requirements and test procedures
- BS-ISO-26021-1 - Road vehicles. End-of-life activation of in-vehicle pyrotechnic devices
- BS-ISO-26021-2 - Road vehicles. End of-life activation of on-board pyrotechnic devices
- BS-ISO-26021-3 - Road vehicles. End-of-life activation of in-vehicle pyrotechnic devices
- BS-ISO-26021-4 - Road vehicles. End-of-life activation of on-board pyrotechnic devices
- BS-ISO-29061-3 - Road vehicles. Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems
- BS-ISO-29061-4 - Road vehicles. Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems
- BS-ISO-29061-5 - Road vehicles. Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems
- BS-ISO-7862 - Road vehicles. Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
- DD-ISO-22240 - Road vehicles. Vehicles safety information model (VSIM)
- PD-CEN-15970 - Pyrotechnic articles. Pyrotechnic articles for vehicles. Overview on work program for EN standards to be developed by CEN/TC 212 WG 4
- PD-CEN-16786 - Road restraint systems. Truck Mounted Attenuators. Performance classes, impact test acceptance criteria and test performance
- PD-ISO-12353-3 - Road vehicles. Traffic accident analysis
- PD-ISO-13396 - Road vehicles. Sled test method to enable the evaluation of side impact protection of child restraint systems. Essential parameters
- PD-ISO-14645 - Road vehicles. Test procedures for evaluating child restraint system interactions with deploying air bags
- PD-ISO-17242 - Quasi-static calibration procedure for belt force transducers
- PD-ISO-22239-1 - Road vehicles. Child seat presence and orientation detection system (CPOD)
- PD-ISO-22239-2 - Road vehicles. Child seat presence and orientation detection system (CPOD)
- PD-ISO-22239-3 - Road vehicles. Child seat presence and orientation detection system (CPOD)
ISO:
- ISO-12097-1 - Road vehicles - Airbag components - Part 1: Vocabulary
- ISO-12097-2 - Road vehicles - Airbag components - Part 2: Testing of airbag modules
- ISO-12097-3 - Road vehicles - Airbag components - Part 3: Testing of inflator assemblies
- ISO-12353-1 - Road vehicles - Traffic accident analysis - Part 1: Vocabulary
- ISO-12353-2 - Road vehicles - Traffic accident analysis - Part 2: Guidelines for the use of impact severity measures
- ISO-12353-3 - Road vehicles - Traffic accident analysis - Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity
- ISO-13214 - Road vehicles - Child restraint systems - Compilation of regulations and standards
- ISO-13215-1 - Road vehicles - Reduction of misuse risk of child restraint systems - Part 1: Forms for field studies
- ISO-13215-2 - Road vehicles - Reduction of misuse risk of child restraint systems - Part 2: Requirements and test procedures for correct installation (panel method)
- ISO-13215-3 - Road vehicles - Reduction of misuse risk of child restraint systems - Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA)
- ISO-13216-1 - Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 1: Seat bight anchorages and attachments
- ISO-13216-1-1 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments - Amendment 1: CRF reduced height specification
- ISO-13216-1-3 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments - Amendment 3: Specifications for the detection of use of ISOFIX CRS
- ISO-13216-2 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 2: Top tether anchorages and attachments
- ISO-13216-3 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 3: Classification of child restraint system and space in vehicle
- ISO-13216-4 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 4: Lower tether anchorages
- ISO-13218 - Road vehicles - Child restraint systems - Report form for accidents involving child passengers
- ISO-13219 - Road vehicles - Risk of thoracic injury associated with Hybrid III sternal deflection due to shoulder belt loading
- ISO-13396 - Road vehicles - Sled test method to enable the evaluation of side impact protection of child restraint systems - Essential parameters
- ISO-14451-1 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Terminology
- ISO-14451-10 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and categorization for semi-finished products
- ISO-14451-2 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 2: Test methods
- ISO-14451-3 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling
- ISO-14451-4 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators
- ISO-14451-5 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5: Requirements and categorization for airbag gas generators
- ISO-14451-6 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 6: Requirements and categorization for airbag modules
- ISO-14451-7 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 7: Requirements and categorization for seatbelt pretensioners
- ISO-14451-8 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters
- ISO-14451-9 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 9: Requirements and categorization for actuators
- ISO-14513 - Road vehicles - Pedestrian protection - Head impact test method
- ISO-14645 - Road vehicles - Test procedures for evaluating child restraint system interactions with deploying air bags
- ISO-14646 - Road vehicles - Side impact testing of child restraint systems - Review of background data and test methods, and conclusions from the ISO work as of November 2005
- ISO-17242 - Quasi-static calibration procedure for belt force transducers
- ISO-17242-AM1 - - Amendment 1
- ISO-19237 - Intelligent transport systems - Pedestrian detection and collision mitigation systems (PDCMS) - Performance requirements and test procedures
- ISO-21750 - Road vehicles - Safety enhancement in conjunction with tyre inflation pressure monitoring
- ISO-22078 - Intelligent transport systems - Bicyclist detection and collision mitigation systems (BDCMS) - Performance requirements and test procedures
- ISO-22239-1 - Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 1: Specifications and test methods
- ISO-22239-2 - Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 2: Resonator specification
- ISO-22239-3 - Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 3: Labelling
- ISO-22240 - Road vehicles - Vehicles safety information model (VSIM)
- ISO-22896 - Road vehicles - Deployment and sensor bus for occupant safety systems
- ISO-23376 - Intelligent transport systems - Vehicle-to-vehicle intersection collision warning systems (VVICW) - Performance requirements and test procedures
- ISO-26021-1 - Road vehicles - End-of-life activation of in-vehicle pyrotechnic devices - Part 1: Application and communication interface
- ISO-26021-2 - Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 2: Communication requirements
- ISO-26021-3 - Road vehicles - End-of-life activation of in-vehicle pyrotechnic devices - Part 3: Data definitions
- ISO-26021-4 - Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 4: Additional communication line with bidirectional communication
- ISO-26021-5 - Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 5: Additional communication line with pulse width modulated signal
- ISO-29061-1 - Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 1: Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments
- ISO-29061-3 - Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 3: Installation of child restraint systems using vehicle seat belts
- ISO-29061-4 - Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 4: Securing of child in child restraint system and daily handling aspects
- ISO-29061-5 - Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 5: Installation and securing of child in a booster system
- ISO-29062 - Road vehicles - Child restraint systems - Sled test method to enable the evaluation of side impact protection
- ISO-2958 - Road vehicles - Exterior protection for passenger cars
- ISO-3208 - Road vehicles - Evaluation of protrusions inside passenger cars
- ISO-7862 - Road vehicles - Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions
- ISO-8853 - Safety harnesses for competition drivers - Requirements and test methods
- ISO/PAS-13396 - Road vehicles - Sled test method to enable the evaluation of side impact protection of child restraint systems - Essential parameters
Other SDOs:
- EN-ISO-14451-1 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Terminology (ISO 14451-1:2013)
- EN-ISO-14451-10 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and categorization for semi-finished products (ISO 14451-10:2013)
- EN-ISO-14451-3 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO 14451-3:2013)
- EN-ISO-14451-4 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators (ISO 14451-4:2013)
- EN-ISO-14451-5 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5: Requirements and categorization for airbag gas generators (ISO 14451-5:2013)
- EN-ISO-14451-6 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 6: Requirements and categorization for airbag modules (ISO 14451-6:2013)
- EN-ISO-14451-7 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 7: Requirements and categorization for seatbelt pretensioners (ISO 14451-7:2013)
- EN-ISO-14451-8 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters (ISO 14451-8:2013)
- EN-ISO-14451-9 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 9: Requirements and categorization for actuators (ISO 14451-9:2013)
- SABS-1563 - The Strength of Large Passenger Vehicle Superstructures (Roll-Over Protection)
- SIS-CEN/TS-16786 - Road restraint systems - Truck Mounted Attenuators - Performance classes, impact test acceptance criteria and test performance
- SIS-ISO/PAS-13396 - Road vehicles - Sled test method to enable the evaluation of side impact protection of child restraint systems - Essential parameters (ISO/PAS 13396:2009, IDT)
- SIS-ISO/TR-12353-3 - Road vehicles - Traffic accident analysis - Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity (ISO/TR 12353-3:2013, IDT)
- SIS-ISO/TR-14645 - Road vehicles - Test procedures for evaluating child restraint system interactions with deploying air bags (ISO/TR 14645:2015, IDT)
- SIS-ISO/TR-14646 - Road vehicles - Side impact testing of child restraint systems - Review of background data and test methods, and conclusions from the ISO work as of November 2005
- SIS-ISO/TS-13396 - Road vehicles Sled test method to enable the evaluation of side impact protection of child restraint systems Essential parameters (ISO/TS 13396:2021)
- SIS-ISO/TS-22239-1 - Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 1: Specifications and test methods
- SIS-ISO/TS-22239-2 - Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 2: Resonator specification
- SIS-ISO/TS-22239-3 - Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 3: Labelling
- SIS-ISO/TS-22240 - Road vehicles - Vehicles Safety Information Model (VSIM) (ISO/TS 22240:2008, IDT)
- SIS-ISO/TS-29062 - Road vehicles - Child restraint systems - Sled test method to enable the evaluation of side impact protection (ISO/TS 29062:2009, IDT)
- SS-EN-13445 - Unfired pressure vessels
- SS-EN-ISO-14451-1 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Terminology (ISO 14451-1:2013)
- SS-EN-ISO-14451-10 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 10: Requirements and categorization for semi-finished products (ISO 14451-10:2013)
- SS-EN-ISO-14451-2 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 2: Test methods (ISO 14451-2:2013)
- SS-EN-ISO-14451-3 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO 14451-3:2013)
- SS-EN-ISO-14451-4 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 4: Requirements and categorization for micro gas generators (ISO 14451-4:2013)
- SS-EN-ISO-14451-5 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5: Requirements and categorization for airbag gas generators (ISO 14451-5:2013)
- SS-EN-ISO-14451-6 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 6: Requirements and categorization for airbag modules (ISO 14451-6:2013)
- SS-EN-ISO-14451-7 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 7: Requirements and categorization for seatbelt pretensioners (ISO 14451-7:2013)
- SS-EN-ISO-14451-8 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 8: Requirements and categorization for igniters (ISO 14451-8:2013)
- SS-EN-ISO-14451-9 - Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 9: Requirements and categorization for actuators (ISO 14451-9:2013)
- SS-EN-ISO-4254-7 - Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017)
- SS-ISO-12353-1 - Road vehicles - Traffic accident analysis - Part 1: Vocabulary (ISO 12353-1:2020, IDT)
- SS-ISO-13215-1 - Road vehicles - Reduction of misuse risk of child restraint systems - Part 1: Forms for field studies (ISO 13215-1:2006, IDT)
- SS-ISO-13215-2 - Road vehicles Reduction of misuse risk of child restraint systems Part 2: Requirements and test procedures for correct installation (panel method) (ISO 13215-2:2022, IDT)
- SS-ISO-13215-3 - Road vehicles Reduction of misuse risk of child restraint systems Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA) (ISO 13215-3:2022, IDT)
- SS-ISO-13216-1 - Child restraint systems - Anchorages in vehicles and attachments to anchorages - Part 1: Seat bight anchorages and attachments ("ISOFIX")
- SS-ISO-13216-1-AM1 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments - Amendment 1: CRF reduced height specification (ISO 13216-1:1999/Amd 1:2006, IDT)
- SS-ISO-13216-1-AM3 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments - Amendment 3: Specifications for the detection of use of ISOFIX CRS (ISO 13216-1:1999/Amd 3:2006, IDT)
- SS-ISO-13216-2 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 2: Top tether anchorages and attachments (ISO 13216-2:2004, IDT)
- SS-ISO-13216-3 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 3: Classification of child restraint system and space in vehicle (ISO 13216-3:2018, IDT)
- SS-ISO-13216-4 - Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 4: Lower tether anchorages (ISO 13216-4:2020, IDT)
- SS-ISO-14513 - Road vehicles - Pedestrian protection - Head impact test method (ISO 14513:2016, IDT)
- SS-ISO-21750 - Road vehicles - Safety enhancement in conjunction with the tyre inflation pressure monitoring (ISO 21750:2006, IDT)
- SS-ISO-22896 - Road vehicles - Deployment and sensor bus for passenger safety systems (ISO 22896:2006, IDT)
- SS-ISO-26021-1 - Road vehicles End-of-life activation of in-vehicle pyrotechnic devices Part 1: Application and communication interface (ISO 26021-1:2022, IDT)
- SS-ISO-26021-2 - Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 2: Communication requirements (ISO 26021-2:2008/Cor 1:2009, IDT)
- SS-ISO-26021-3 - Road vehicles End-of-life activation of in-vehicle pyrotechnic devices Part 3: Data definitions (ISO 26021-3:2022, IDT)
- SS-ISO-26021-4 - Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 4: Additional communication line with bidirectional communication (ISO 26021-4:2009, IDT)
- SS-ISO-26021-5 - Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 5: Additional communication line with pulse width modulated signal (ISO 26021-5:2009, IDT)
- SS-ISO-29061-1 - Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 1: Vehicles and child restraint systems equipped with ISOFIX anchorages and attachments (ISO 29061-1:2010, IDT)
- SS-ISO-29061-3 - Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 3: Installation of child restraint systems using vehicle seat belts (ISO 29061-3:2017, IDT)
- SS-ISO-29061-4 - Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 4: Securing of child in child restraint system and daily handling aspects (ISO 29061-4:2017, IDT)
- SS-ISO-29061-5 - Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 5: Installation and securing of child in a booster system (ISO 29061-5:2017, IDT)
- SS-ISO-7862 - Road vehicles - Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions