Document Center List of Standards on Electric Road Vehicles Including Their Components And Systems Tyres For Road Vehicles, See 83.160.10
ICS Code 43.120
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
BSI:
- BS-EN-13444-1 - Electrically propelled road vehicles. Measurement of emissions of hybrid vehicles
- BS-EN-13447 - Electrically propelled road vehicles. Terminology
- BS-EN-15194 - Cycles. Electrically power assisted cycles. EPAC Bicycles
- BS-EN-17128 - Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to typeapproval for on-road use. Personal light electric vehicles (PLEV). Requirements and test methods
- BS-EN-17186 - Identification of vehicles and infrastructures compatibility. Graphical expression for consumer information on EV power supply
- BS-EN-17404 - Cycles. Electrically power assisted cycles. EPAC Mountain bikes
- BS-EN-1821-2 - Electrically propelled road vehicles. Measurement of road operating ability
- BS-EN-1986-1 - Electrically propelled road vehicles. Measurement of energy performances. Pure electric vehicles
- BS-EN-1986-2 - Electrically propelled road vehicles. Measurement of energy performances. Thermal electric hybrid vehicles
- BS-EN-1987-1 - Electrically propelled road vehicles. Specific requirements for safety
- BS-EN-1987-2 - Electrically propelled road vehicles. Specific requirements for safety. Functional safety means and protection against failures
- BS-EN-50374 - Conductor cars
- BS-EN-50620 - Electric cables. Charging cables for electric vehicles
- BS-EN-50620-TC - Electric cables. Charging cables for electric vehicles
- BS-EN-50696 - Contact Interface for Automated Connection Device
- BS-EN-61851-1 - Electric vehicle conductive charging system
- BS-EN-61851-21 - Electric vehicle conductive charging system
- BS-EN-61851-21-1 - Electric vehicle conductive charging system
- BS-EN-61851-22 - Electric vehicle conductive charging system
- BS-EN-61851-23 - Electric vehicle conductive charging system
- BS-EN-61851-24 - Electric vehicle conductive charging system
- BS-EN-61982-3 - Secondary batteries for the propulsion of electric road vehicles
- BS-EN-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62196-1-TC - Tracked Changes. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62196-2 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62196-2-TC - Tracked Changes. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62196-3 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-62576 - Electric double-layer capacitors for use in hybrid electric vehicles. Test methods for electrical characteristics
- BS-EN-62660-1 - Secondary lithium-ion cells for the propulsion of electric road vehicles
- BS-EN-62660-2 - Secondary lithium-ion cells for the propulsion of electric road vehicles
- BS-EN-62660-3 - Secondary lithium-ion cells for the propulsion of electric road vehicles
- BS-EN-62752 - In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
- BS-EN-62827-3 - Wireless power transfer - Management. - Part 3: Multiple source control management
- BS-EN-IEC-61851-1 - Electric vehicle conductive charging system
- BS-EN-IEC-61851-25 - Electric vehicle conductive charging system
- BS-EN-IEC-61980-1 - Electric vehicle wireless power transfer (WPT) systems
- BS-EN-IEC-61980-2 - Electric vehicle wireless power transfer (WPT) systems
- BS-EN-IEC-61980-3 - Electric vehicle wireless power transfer (WPT) systems
- BS-EN-IEC-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62196-2 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62196-3 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62196-3-TC - Tracked Changes. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62196-6 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- BS-EN-IEC-62576 - Electric double-layer capacitors for use in hybrid electric vehicles. Test methods for electrical characteristics
- BS-EN-IEC-62660-2 - Secondary lithium-ion cells for the propulsion of electric road vehicles
- BS-EN-IEC-62660-3 - Secondary lithium-ion cells for the propulsion of electric road vehicles
- BS-EN-IEC-62660-3-TC - Tracked Changes. Secondary lithium-ion cells for the propulsion of electric road vehicles
- BS-EN-IEC-62840-2 - Electric vehicle battery swap system
- BS-EN-IEC-63110-1 - Protocol for management of electric vehicles charging and discharging infrastructures
- BS-EN-IEC-63119-1 - Information exchange for electric vehicle charging roaming service
- BS-EN-IEC-63281-2-1 - E-Transporters
- BS-EN-IEC-63281-3-1 - E-Transporters
- BS-EN-IEC-63281-3-2 - E-Transporters
- BS-EN-ISO-15118-1 - Road vehicles. Vehicle to grid communication interface
- BS-EN-ISO-15118-2 - Road vehicles. Vehicle-to-Grid Communication Interface. Network and application protocol requirements
- BS-EN-ISO-15118-20 - Road vehicles - Vehicle to grid communication interface
- BS-EN-ISO-15118-20-TC - Tracked Changes. Road vehicles. Vehicle to grid communication interface
- BS-EN-ISO-15118-4 - Road vehicles - Vehicle to grid communication interface Part 4: Network and application protocol conformance test
- BS-EN-ISO-15118-5 - Road vehicles — Vehicle to grid communication interface Part 5: Physical layer and data link layer conformance test
- BS-EN-ISO-15118-8 - Road vehicles. Vehicle to grid communication interface
- BS-EN-ISO-15118-9 - Road vehicles. Vehicle to grid communication interface
- BS-EN-ISO-17409 - Electrically propelled road vehicles. Conductive power transfer. Safety requirements
- BS-IEC-63281-1 - E-Transporters
- BSI-Flex-2071-v1.0 - Design of publicly accessible charging sites for battery electric HGVs. Code of practice
- BSI-Flex-2072 - Battery electric and hydrogen-fuelled heavy-duty vehicles. Workshops and protocols for maintenance and inspection. Specification
- BS-ISO-12405-1 - Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems
- BS-ISO-12405-2 - Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems
- BS-ISO-12405-3 - Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems
- BS-ISO-12405-4 - Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems
- BS-ISO-15118-1 - Road vehicles. Vehicle to grid communication interface. General information and use-case definition
- BS-ISO-15118-2 - Road vehicles. Vehicle-to-Grid Communication Interface. Network and application protocol requirements
- BS-ISO-15118-3 - Road vehicles. Vehicle to grid communication interface. Physical and data link layer requirements
- BS-ISO-15118-4 - Road vehicles. Vehicle to grid communication interface
- BS-ISO-15118-5 - Road vehicles. Vehicle to grid communication interface
- BS-ISO-15118-8 - Road vehicles. Vehicle to grid communication interface
- BS-ISO-15118-9 - Road vehicles. Vehicle to grid communication interface
- BS-ISO-17409 - Electrically propelled road vehicles. Connection to an external electric power supply. Safety requirements
- BS-ISO-18300 - Electrically propelled vehicles. Test specifications for lithium-ion battery systems combined with lead acid battery or capacitor
- BS-ISO-19363 - Electrically propelled road vehicles. Magnetic field wireless power transfer. Safety and interoperability requirements
- BS-ISO-20762 - Electrically propelled road vehicles. Determination of power for propulsion of hybrid electric vehicle
- BS-ISO-21498-1 - Electrically propelled road vehicles. Electrical specifications and tests for voltage class B systems and components
- BS-ISO-21498-2 - Electrically propelled road vehicles Electrical specifications and tests for voltage class B systems and components
- BS-ISO-21782-1 - Electrically propelled road vehicles. Test specification for electric propulsion components
- BS-ISO-21782-2 - Electrically propelled road vehicles. Test specification for electric propulsion components
- BS-ISO-21782-3 - Electrically propelled road vehicles. Test specification for electric propulsion components
- BS-ISO-21782-6 - Electrically propelled road vehicles. Test specification for electric propulsion components
- BS-ISO-23273 - Fuel cell road vehicles. Safety specifications. Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
- BS-ISO-23273-1 - Fuel cell road vehicles. Safety specifications
- BS-ISO-23273-2 - Fuel cell road vehicles. Safety specifications
- BS-ISO-23273-3 - Fuel cell road vehicles. Safety specifications
- BS-ISO-23274 - Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
- BS-ISO-23274-1 - Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements
- BS-ISO-23274-2 - Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements
- BS-ISO-23828 - Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen
- BS-ISO-23828-TC - Tracked Changes. Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen
- BS-ISO-6469-1 - Electrically propelled road vehicles. Safety specifications
- BS-ISO-6469-2 - Electrically propelled road vehicles. Safety specifications
- BS-ISO-6469-2-TC - Tracked Changes. Electrically propelled road vehicles. Safety specifications
- BS-ISO-6469-3 - Electrically propelled road vehicles. Safety specifications
- BS-ISO-6469-3-TC - Tracked Changes. Electrically propelled road vehicles. Safety specifications
- BS-ISO-6469-4 - Electrically propelled road vehicles. Safety specifications
- CWA-16688 - Battery Swap Systems Interfaces for Electric Vehicles
- DD-CLC-50457-1 - Conductive charging for electric vehicles
- DD-CLC-50457-2 - Conductive charging for electric vehicles
- ISO/SAE-12906 - Road vehicles - Test procedures for electric vehicles to determine charging performance
- PAS-1899 - Electric vehicles
- PAS-29000 - Commercially operated vehicles. Framework for mitigating security risks from malicious use. Specification
- PAS-7060 - Electric vehicles. Safe and environmentally-conscious design and use of batteries. Guide
- PAS-7062 - Electric vehicle battery cells. Health and safety, environmental and quality management considerations in cell manufacturing and finished cell. Code of practice
- PD-CLC-IEC-61851-3-1 - Electric vehicle conductive charging system
- PD-CLC-IEC-61851-3-2 - Electric vehicle conductive charging system
- PD-IEC-61851-3-4 - Electric vehicles conductive charging system
- PD-IEC-61980-2 - Electric vehicle wireless power transfer (WPT) systems
- PD-IEC-61980-3 - Electric vehicle wireless power transfer (WPT) systems
- PD-IEC-62196-3-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles
- PD-IEC-62763 - Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire
- PD-IEC-62840-1 - Electric vehicle battery swap system
- PD-IEC-62933-200 - Electrical energy storage (EES) systems
- PD-IEC-PAS-62840-3 - Electric vehicle battery swap system
- PD-IEC-PAS-63454 - Conductive charging of electric vehicles. DC vehicle coupler configuration GG
- PD-ISO-11954 - Fuel cell road vehicles. Performance measurement. Vehicles fuelled with compressed hydrogen
- PD-ISO-11954-TC - Tracked Changes. Fuel cell road vehicles. Performance measurement. Vehicles fuelled with compressed hydrogen
- PD-ISO-11955 - Hybrid-electric road vehicles. Guidelines for charge balance measurement
- PD-ISO-17326 - Fuel cell road vehicles. Cold start performances under sub-zero temperature. Vehicles fuelled with compressed hydrogen
- PD-ISO-8713 - Electrically propelled road vehicles. Vocabulary
- PD-ISO/IEC-PAS-16898 - Electrically propelled road vehicles. Dimensions and designation of secondary lithium-ion cells
- PD-ISO/PAS-19295 - Electrically propelled road vehicles. Specification of voltage sub-classes for voltage class B
- PD-ISO/PAS-19363 - Electrically propelled road vehicles. Magnetic field wireless power transfer. Safety and interoperability requirements
IEC:
- IEC-60335-2-114 - Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for Personal-e-Transporters
- IEC-60364-7-722 - Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles
- IEC-60364-7-722-RL - Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles
- IEC-61851-1 - Electric vehicle conductive charging system - Part 1: General requirements
- IEC-61851-21 - Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply
- IEC-61851-21-1 - Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply
- IEC-61851-22 - Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
- IEC-61851-23 - Electric vehicle conductive charging system - Part 23: DC electric vehicle supply equipment
- IEC-61851-24 - Electric vehicle conductive charging system - Part 24: Digital communication between a DC EV supply equipment and an electric vehicle for control of DC charging
- IEC-61851-25 - Electric vehicle conductive charging system - Part 25: DC EV supply equipment where protection relies on electrical separation
- IEC-61851-3-1 - Electric vehicles conductive charging system - Part 3-1: DC EV supply equipment where protection relies on double or reinforced insulation - General rules and requirements for stationary equipment
- IEC-61851-3-2 - Electric vehicle conductive charging system - Part 3-2: DC EV supply equipment where protection relies on double or reinforced insulation - Particular requirements for portable and mobile equipment
- IEC-61851-3-4 - Electric vehicles conductive charging system - Part 3-4: DC EV supply equipment where protection relies on double or reinforced insulation - General definitions and requirements for CANopen communication
- IEC-61851-3-5 - Electric vehicles conductive charging system - Part 3-5: DC EV supply equipment where protection relies on double or reinforced insulation - Pre-defined communication parameters and general application objects
- IEC-61851-3-6 - Electric vehicles conductive charging system - Part 3-6: DC EV supply equipment where protection relies on double or reinforced insulation - Voltage converter unit communication
- IEC-61851-3-7 - Electric vehicles conductive charging system - Part 3-7: DC EV supply equipment where protection relies on double or reinforced insulation - Battery system communication
- IEC-61980-1 - Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements
- IEC-61980-2 - Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities
- IEC-61980-3 - Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for magnetic field wireless power transfer systems
- IEC-61982-3 - Part 3: Performance & Life Testing (Traffic Compatible, Urban Use Vehicles), Secondary Bat
- IEC-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- IEC-62196-1 CMV - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- IEC-62196-2 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
- IEC-62196-3 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
- IEC-62196-3-1 - Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
- IEC-62196-6 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
- IEC-62576 - Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics
- IEC-62660-1 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing
- IEC-62660-2 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing
- IEC-62660-3 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements
- IEC-62660-3-RL - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements
- IEC-62763 - Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire
- IEC-62827-3 - Wireless power transfer - Management - Part 3: Multiple source control management
- IEC-62840-1 - Electric vehicle battery swap system - Part 1: General and guidance
- IEC-62840-2 - Electric vehicle battery swap system - Part 2: Safety requirements
- IEC-62893-1 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
- IEC-62893-1-AM1 - Amendment 1 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
- IEC-62893-2 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods
- IEC-62893-3 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V
- IEC-62893-4-1 - Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system
- IEC-62933-2-200 - Electrical energy storage (EES) systems - Part 2-200: Unit parameters and testing methods - Case study of electrical energy storage (EES) systems located in EV charging station with PV
- IEC-63110-1 - Protocol for management of electric vehicles charging and discharging infrastructures - Part 1: Basic definitions, use cases and architectures
- IEC-63119-1 - Information exchange for electric vehicle charging roaming service - Part 1: General
- IEC-63281-1 - E-Transporters - Part 1: Terminology and classification
- IEC-63281-2-1 - E-Transporters - Part 2-1: Safety requirements and test methods for personal e-Transporters
- IEC-63281-3-1 - E-Transporters - Part 3-1: Performance test method for total run time of e-scooters with consideration to environmental conditions of actual use
- IEC-63281-3-2 - E-Transporters - Part 3-2: Performance test methods for mobility of cargo e-Transporters
- IEC-63584 - Open Charge Point Protocol (OCPP)
- IEC-783 - Wiring and connectors for electric road vehicles
- IEC-784 - Instrumentation for electric road vehicles
- IEC-785 - Rotating machines for electric road vehicles
- IEC-786 - Controllers for electric road vehicles
- IEC/PAS-61851-1-1 -
Electric vehicle conductive charging system - Part 1-1: Specific requirements for electric vehicle conductive charging system using type 4 vehicle coupler
- IEC/PAS-61980-5 - Electric vehicle wireless power transfer (WPT) systems - Part 5: Interoperability and safety of dynamic wireless power transfer (D-WPT) for electric vehicles
- IEC/PAS-62840-3 - Electric vehicle battery swap system - Part 3: Particular safety and interoperability requirements for battery swap systems operating with removable RESS/battery systems
- IEC/PAS-63454 - Conductive charging of electric vehicles - DC vehicle coupler configuration GG
- IEC/PAS-63472 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler
ISO:
- ISO-11954 - Fuel cell road vehicles - Performance measurement - Vehicles fuelled with compressed hydrogen
- ISO-11955 - Hybrid-electric road vehicles - Guidelines for charge balance measurement
- ISO-12405-1 - Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 1: High-power applications
- ISO-12405-2 - Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications
- ISO-12405-3 - Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 3: Safety performance requirements
- ISO-12405-4 - Electrically propelled road vehicles -Test specification for lithium-ion traction battery packs and systems - Part 4: Performance testing
- ISO-15118-1 - Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition
- ISO-15118-2 - Road vehicles - Vehicle-to-Grid Communication Interface - Part 2: Network and application protocol requirements
- ISO-15118-20 - Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements
- ISO-15118-3 - Road vehicles - Vehicle to grid communication interface - Part 3: Physical and data link layer requirements
- ISO-15118-4 - Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test
- ISO-15118-5 - Road vehicles - Vehicle to grid communication interface - Part 5: Physical layer and data link layer conformance test
- ISO-15118-8 - Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication
- ISO-15118-9 - Road vehicles - Vehicle to grid communication interface - Part 9: Physical and data link layer conformance test for wireless communication
- ISO-17326 - Fuel cell road vehicles - Cold start performances under sub-zero temperature - Vehicles fuelled with compressed hydrogen
- ISO-17409 - Electrically propelled road vehicles - Conductive power transfer - Safety requirements
- ISO-18300 - Electrically propelled vehicles - Test specifications for lithium-ion battery systems combined with lead acid battery or capacitor
- ISO-19363 - Electrically propelled road vehicles - Magnetic field wireless power transfer - Safety and interoperability requirements
- ISO-20762 - Electrically propelled road vehicles - Determination of power for propulsion of hybrid electric vehicle
- ISO-21498-1 - Electrically propelled road vehicles - Electrical specifications and tests for voltage class B systems and components - Part 1: Voltage sub-classes and characteristics
- ISO-21498-2 - Electrically propelled road vehicles - Electrical specifications and tests for voltage class B systems and components - Part 2: Electrical tests for components
- ISO-21782-1 - Electrically propelled road vehicles - Test specification for electric propulsion components - Part 1: General test conditions and definitions
- ISO-21782-2 - Electrically propelled road vehicles - Test specification for electric propulsion components - Part 2: Performance testing of the motor system
- ISO-21782-3 - Electrically propelled road vehicles - Test specification for electric propulsion components - Part 3: Performance testing of the motor and the inverter
- ISO-21782-6 - Electrically propelled road vehicles - Test specification for electric propulsion components - Part 6: Operating load testing of motor and inverter
- ISO-23273 - Fuel cell road vehicles - Safety specifications - Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
- ISO-23273-1 - Fuel cell road vehicles - Safety specifications - Part 1: Vehicle functional safety
- ISO-23273-2 - Fuel cell road vehicles - Safety specifications - Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
- ISO-23273-3 - Fuel cell road vehicles - Safety specifications - Part 3: Protection of persons against electric shock
- ISO-23274 - Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles
- ISO-23274-1 - Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 1: Non-externally chargeable vehicles
- ISO-23274-2 - Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles
- ISO-23828 - Fuel cell road vehicles - Energy consumption measurement - Vehicles fuelled with compressed hydrogen
- ISO-5474-1 - Electrically propelled road vehicles - Functional and safety requirements for power transfer between vehicle and external electric circuit - Part 1: General requirements for conductive power transfer
- ISO-5474-2 - Electrically propelled road vehicles - Functional and safety requirements for power transfer between vehicle and external electric circuit - Part 2: AC power transfer
- ISO-5474-3 - Electrically propelled road vehicles - Functional and safety requirements for power transfer between vehicle and external electric circuit - Part 3: DC power transfer
- ISO-6469-1 - Electrically propelled road vehicles - Safety specifications - Part 1: Rechargeable energy storage system (RESS)
- ISO-6469-1-AM1 - - Amendment 1: Electrically propelled road vehicles - Safety specifications - Part 1: Rechargeable energy storage system (RESS) - Amendment 1: Safety management of thermal propagation
- ISO-6469-2 - Electrically propelled road vehicles - Safety specifications - Part 2: Vehicle operational safety
- ISO-6469-3 - Electrically propelled road vehicles - Safety specifications - Part 3: Electrical safety
- ISO-6469-3-AM1 - - Amendment 1: Withstand voltage test for electric power sources
- ISO-6469-4 - Electrically propelled road vehicles - Safety specifications - Part 4: Post crash electrical safety
- ISO-8713 - Electrically propelled road vehicles - Vocabulary
- ISO-8714 - Electric road vehicles - Reference energy consumption and range - Test procedures for passenger cars and light commercial vehicles
- ISO-8715 - Electric road vehicles -- Road operating characteristics
- ISO/IEC-PAS-16898 - Electrically propelled road vehicles - Dimensions and designation of secondary lithium-ion cells
- ISO/PAS-16898 - Electrically propelled road vehicles - Dimensions and designation of secondary lithium-ion cells
- ISO/PAS-19295 - Electrically propelled road vehicles - Specification of voltage sub-classes for voltage class B
- ISO/PAS-19363 - Electrically propelled road vehicles - Magnetic field wireless power transfer - Safety and interoperability requirements
Other SDOs:
- DS-EN-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- EN-13447 - Electrically Propelled Road Vehicles - Terminology
- EN-15194 - Cycles - Electrically power assisted cycles - EPAC Bicycles
- EN-1986-1 - Electrically Propelled Road Vehicles, Measurement of Energy Performances, Pure Electr
- EN-1987-1 - Electrically propelled road vehicles. Specific requirements for safety. On board energy storage
- EN-1987-2 - Part 2: Functional Safety Means & Protection Against Failures, Electrically Propelled
- EN-61851-1 - Electric vehicle conductive charging system - Part 1: General requirements
- EN-61851-21-1 - Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
- EN-61851-23 - Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station
- EN-61851-24 - Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging
- EN-61982-3 - Secondary Batteries for the Propulsion of Electric Road Vehicles, Performance & Life T
- EN-62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- EN-62196-2 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
- EN-62196-3 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
- EN-62271-102 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
- EN-62576 - Electric Double-Layer Capacitors for Use in Hybrid Electric Vehicles - Test Methods F
- EN-62660-1 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing
- EN-62660-2 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing
- EN-62660-3 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements
- EN-62827-3 - Wireless power transfer - Management - Part 3: Multiple source control management
- EN-IEC-61851-1 - Electric vehicle conductive charging system - Part 1: General requirements (IEC 61851-1:2017)
- EN-IEC-62576 - Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics
- EN-IEC-62660-1 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing (IEC 62660-1:2018)
- EN-IEC-62660-2 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing (IEC 62660-2:2018)
- EN-IEC-62840-2 - Electric vehicle battery swap system - Part 2: Safety requirements (IEC 62840-2:2016)
- EN-ISO-15118-1 - Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition
- EN-ISO-15118-2 - Road vehicles - Vehicle-to-grid communication Interface - Part 2: Network and application protocol requirements
- EN-ISO-15118-3 - Road vehicles - Vehicle to grid Communication interface - Part 3: Physical and data link layer requirements
- EN-ISO-15118-4 - Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO 15118-4:2018)
- EN-ISO-17409 - Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements
- SIS-ISO/PAS-19295 - Electrically propelled road vehicles - Specifications of voltage sub-classes for voltage class B
- SIS-ISO/TR-8713 - Electrically propelled road vehicles Vocabulary
- SS-EN-12736 - Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level
- SS-EN-13444-1 - Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1: Thermal electric hybrid vehicles
- SS-EN-13447 - Electrically propelled road vehicles - Terminology
- SS-EN-15194 - Cycles - Electrically power assisted cycles - EPAC Bicycles
- SS-EN-17128 - Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use - Personal light electric vehicles (PLEV) - Requirements and test methods
- SS-EN-17186 - Identification of vehicles and infrastructures compatibility - Graphical expression for consumer information on EV power supply
- SS-EN-17404 - Cycles - Electrically power assisted cycles - EPAC Mountain bikes
- SS-EN-1821-1 - Electrically propelled road vehicles - Measurement of road operating ability - Part 1: Pure electric vehicles
- SS-EN-1821-2 - Electrically propelled road vehicles - Measurement of road operating ability - Part 2: Thermal electric hybrid vehicles
- SS-EN-1986-1 - Electrically propelled road vehicles - Measurement of energy performances - Part 1: Pure electric vehicles
- SS-EN-1986-2 - Electrically propelled road vehicles - Measurement of energy performances - Part 2: Thermal electric hybrid vehicles
- SS-EN-1987-1 - Electrically propelled road vehicles - Specific requirements for safety - Part 1: On board energy storage
- SS-EN-1987-2 - Electrically propelled road vehicles - Specific requirements for safety - Part 2: Functional safetymeans and protection against failures
- SS-EN-1987-3 - Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards
- SS-EN-ISO-128-100 - Technical product documentation - General principles of representation - Part 100: Index (ISO 128-100:2020)
- SS-EN-ISO-15118-1 - Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO 15118-1:2019)
- SS-EN-ISO-15118-2 - Road vehicles - Vehicle-to-grid communication Interface - Part 2: Network and application protocol requirements (ISO 15118-2:2014)
- SS-EN-ISO-15118-20 - Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements (ISO 15118-20:2022)
- SS-EN-ISO-15118-3 - Road vehicles - Vehicle to grid Communication interface - Part 3: Physical and data link layer requirements (ISO 15118-3:2015)
- SS-EN-ISO-15118-4 - Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test (ISO 15118-4:2018)
- SS-EN-ISO-15118-5 - Road vehicles - Vehicle to grid communication interface - Part 5: Physical layer and data link layer conformance test (ISO 15118-5:2018)
- SS-EN-ISO-15118-8 - Road vehicles - Vehicle to grid communication interface - Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2020)
- SS-EN-ISO-15118-9 - Road vehicles - Vehicle to grid communication interface - Part 9: Physical and data link layer conformance test for wireless communication (ISO 15118-9:2022)
- SS-EN-ISO-16739-1 - Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2018)
- SS-EN-ISO-17409 - Electrically propelled road vehicles - Conductive power transfer - Safety requirements (ISO 17409:2020)
- SS-EN-ISO-19363 - Electrically propelled road vehicles - Magnetic field wireless power transfer - Safety and interoperability requirements (ISO 19363:2020)
- SS-ISO-12405-1 - Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 1: High-power applications (ISO 12405-1:2011, IDT)
- SS-ISO-12405-2 - Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications (ISO 12405-2:2012, IDT)
- SS-ISO-12405-3 - Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 3: Safety performance requirements (ISO 12405-3:2014, IDT)
- SS-ISO-12405-4 - Electrically propelled road vehicles -Test specification for lithium-ion traction battery packs and systems - Part 4: Performance testing (ISO 12405-4:2018, IDT)
- SS-ISO-15118-1 - Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO 15118-1:2013)
- SS-ISO-15118-2 - Road vehicles - Vehicle-to-Grid Communication Interface - Part 2: Network and application protocol requirements (ISO 15118-2:2014, IDT)
- SS-ISO-15118-9 - Road vehicles Vehicle to grid communication interface Part 9: Physical and data link layer conformance test for wireless communication (ISO 15118-9:2022, IDT)
- SS-ISO-17409 - Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, IDT)
- SS-ISO-18300 - Electrically propelled vehicles - Test specifications for lithium-ion battery systems combined with lead acid battery or capacitor (ISO 18300:2016, IDT)
- SS-ISO-20762 - Electrically propelled road vehicles - Determination of power for propulsion of hybrid electric vehicle (ISO 20762:2018, IDT)
- SS-ISO-21498-1 - Electrically propelled road vehicles Electrical specifications and tests for voltage class B systems and components Part 1: Voltage sub-classes and characteristics (ISO 21498-1:2021, IDT)
- SS-ISO-21498-2 - Electrically propelled road vehicles Electrical specifications and tests for voltage class B systems and components Part 2: Electrical tests for components (ISO 21498-2:2021,IDT)
- SS-ISO-21782-1 - Electrically propelled road vehicles - Test specification for electric propulsion components - Part 1: General test conditions and definitions (ISO 21782-1:2019, IDT)
- SS-ISO-21782-2 - Electrically propelled road vehicles - Test specification for electric propulsion components - Part 2: Performance testing of the motor system (ISO 21782-2:2019, IDT)
- SS-ISO-21782-3 - Electrically propelled road vehicles - Test specification for electric propulsion components - Part 3: Performance testing of the motor and the inverter (ISO 21782-3:2019, IDT)
- SS-ISO-21782-6 - Electrically propelled road vehicles - Test specification for electric propulsion components - Part 6: Operating load testing of motor and inverter (ISO 21782-6:2019, IDT)
- SS-ISO-23273 - Fuel cell road vehicles - Safety specifications - Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen (ISO 23273:2013, IDT)
- SS-ISO-23273-1 - Fuel cell road vehicles - Safety specifications - Part 1: Vehicle functional safety (ISO 23273-1:2006, IDT)
- SS-ISO-23273-2 - Fuel cell road vehicles - Safety specifications - Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen (ISO 23273-2:2006, IDT)
- SS-ISO-23273-3 - Fuel cell road vehicles - Safety specifications - Part 3: Protection of persons against electric shock (ISO 23273-3:2006, IDT)
- SS-ISO-23274 - Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles (ISO 23274:2007, IDT)
- SS-ISO-23274-1 - Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 1: Non-externally chargeable vehicles (ISO 23274-1:2019, IDT)
- SS-ISO-23274-2 - Hybrid-electric road vehicles Exhaust emissions and fuel consumption measurements Part 2: Externally chargeable vehicles (ISO 23274-2:2021, IDT)
- SS-ISO-23828 - Fuel cell road vehicles Energy consumption measurement Vehicles fuelled with compressed hydrogen (ISO 23828:2022, IDT)
- SS-ISO-6469-1 - Electrically propelled road vehicles - Safety specifications - Part 1: Rechargeable energy storage system (RESS) (ISO 6469-1:2019, IDT)
- SS-ISO-6469-1-AM1 - Electrically propelled road vehicles Safety specifications Part 1: Rechargeable energy storage system (RESS) Amendment 1: Safety management of thermal propagation (ISO 6469-1:2019/Amd 1:2022, IDT)
- SS-ISO-6469-2 - Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety (ISO 6469-2:2022, IDT)
- SS-ISO-6469-3 - Electrically propelled road vehicles Safety specifications Part 3: Electrical safety (ISO 6469-3:2021, IDT)
- SS-ISO-6469-4 - Electrically propelled road vehicles - Safety specifications - Part 4: Post crash electrical safety requirements (ISO 6469-4:2015, IDT)
- SS-ISO-8715 - Electric road vehicles - Road operating characteristics
- UNE-EN-61851-23 - Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station
- UNE-HD-60364-7-722 - Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles