Document Center is acquired by Nimonik

Document Center List of Standards on Marine Engines And Propulsion Systems Standards For Internal Combustion Engines For General Use, See 27.020

ICS Code 47.020.20

Return to ICS Index.

Up to Level 2:

• 47.020 (Shipbuilding and marine structures in general Including offshore structures, except offshore structures for petroleum and natural gas industries, and seabed mining Water transport, see 03.220.40 Offshore structures for seabed mining, see 73.100.30 Offshore structures for petroleum and natural gas industries, see 75.180.10)

The following documents are a part of this series:

ASTM:

• ASTM-D5931 - Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
• ASTM-D7845 - Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
• ASTM-F1134 - Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
• ASTM-F1309 - Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
• ASTM-F1338 - Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly
• ASTM-F1431 - Standard Specification for Water Trap for Diesel Exhaust
• ASTM-F1718 - Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
• ASTM-F2361 - Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
• ASTM-F2798 - Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
• ASTM-F2876 - Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications

BSI:

• BS-1170 - Recommendations for treatment of water for marine boilers
• BS-7881 - Method of test for petrol filters
• BS-EN-15609 - LPG equipment and accessories. LPG propulsion systems for boats, yachts and other watercraft. Installation requirements
• BS-EN-15609-TC - Tracked Changes. LPG equipment and accessories. LPG propulsion systems for boats, yachts and other watercraft. Installation requirements
• BS-EN-ISO-18854 - Small craft. Reciprocating internal combustion engines exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
• BS-ISO-13592 - Small craft. Backfire flame control for petrol engines
• BS-ISO-13613 - Ships and marine technology. Maintenance and testing to reduce losses in critical systems for propulsion
• BS-ISO-18770 - Ships and marine technology. Machinery space flammable oil systems. Prevention of leakage of flammable oil
• BS-ISO-20083-2 - Ships and marine technology. Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion
• BS-ISO-20083-3 - Ships and marine technology. Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion
• BS-ISO-20233-1 - Ships and marine technology. Model test method for propeller cavitation noise evaluation in ship design
• BS-ISO-20233-2 - Ships and marine technology. Model test method for propeller cavitation noise evaluation in ship design
• BS-ISO-22098 - Ships and marine technology. Full-scale test method for propeller cavitation observation and hull pressure measurement
• BS-ISO-23453 - Ships and marine technology. Guidelines for the design and manufacture of the hub cap with fins for a fixed-pitch marine propeller
• BS-ISO-3715-2 - Vocabulary for Controllable-Pitch Propeller Plants
• BS-ISO-484-1 - Shipbuilding. Ship screw propellers. Manufacturing tolerances
• BS-ISO-484-2 - Shipbuilding. Ship screw propellers. Manufacturing tolerances
• BS-MA-74-2 - Tapers & Other Outboard Details of Propeller Shafts, Specification for Shafts of Diame
• BS-MA-86 - Glossary of terms used in shipbuilding: list of equivalent terms for ship screw propellers
• BS-MA-9 - Flanges, Bolting & Gaskets for Exhaust Gas, Piping for Diesel Engines & Boiler Uptakes

ISO:

• ISO-13613 - Ships and marine technology - Maintenance and testing to reduce losses in critical systems for propulsion
• ISO-18770 - Ships and marine technology - Machinery-space flammable oil systems - Prevention of leakage of flammable oil
• ISO-18854 - Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
• ISO-20083-2 - Ships and marine technology - Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion - Part 2: Optical reflection method
• ISO-20083-3 - Ships and marine technology - Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion - Part 3: Elastic vibration method
• ISO-20233-1 - Ships and marine technology - Model test method for propeller cavitation noise evaluation in ship design - Part 1: Source level estimation
• ISO-20233-2 - Ships and marine technology - Model test method for propeller cavitation noise evaluation in ship design - Part 2: Noise source localization
• ISO-22098 - Ships and marine technology - Full-scale test method for propeller cavitation observation and hull pressure measurement
• ISO-23453 - Ships and marine technology - Guidelines for the design and manufacture of the hub cap with fins for a fixed-pitch marine propeller
• ISO-3715-1 - Ships and marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers
• ISO-3715-2 - Ships and marine technology - Propulsion plants for ships - Part 2: Vocabulary for controllable-pitch propeller plants
• ISO-4679 - Ships and marine technology - Hydraulic performance tests for waterjet propulsion system
• ISO-484-1 - Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 1: Propellers of diameter greater than 2,50 m
• ISO-484-2 - Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
• ISO/PAS-13613 - Ships and marine technology - Maintenance and testing to reduce losses in critical systems for propulsion

Other SDOs:

• DIN-EN-ISO-21487 - Small craft - Permanently installed petrol and diesel fuel tanks
• DIN-EN-ISO-3715-1 - Part 1: Vocabulary for Geometry of Properties, Ships & Marine Technology, Propulsion P
• DIN-EN-ISO-3715-2 - Part 2: Vocabulary for Controllable-Pitch Propeller Plants,Ships & Marine Technology,
• DIN-EN-ISO-8665 - Small Craft - Marine Propulsion Reciprocating Internal Combustion Engines - Power Meas
• EN-15609 - LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft - Installation requirements
• EN-ISO-18854 - Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
• EN-ISO-3715-2 - Part 2: Vocabulary for Controllable-Pitch Propeller Plants,Ships & Marine Technology,
• SS-780262 - Shipbuilding - Propeller shafting - Propeller fitting with cone and key - Assembly
• SS-780263 - Shipbuilding - Propeller shafting - Keys for propeller shafts
• SS-780264 - Shipbuilding - Propeller shafting - Propeller nuts
• SS-780265 - Shipbuilding - Propeller shafting - Wrenches for propeller nuts
• SS-780266 - Shipbuilding - Propeller shafting - Locks for propeller nuts
• SS-782012 - Shipbuilding - Propeller shafting - Design and assembly directions
• SS-782013 - Shipbuilding - Propeller shafting - Propeller fitting with cone without key - Assembly
• SS-782014 - Shipbuilding - Propeller shafting - Propeller bosses - Design directions
• SS-782038 - Shipbuilding - Ship screw propellers - List of equivalent terms
• SS-782039 - Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 1: Propellers of diameter greater than 2,50 m
• SS-782040 - Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 2: Propellers of diameter between 0,80 m and 2,50 m inclusive
• SS-EN-15609 - LPG equipment and accessories - LPG propulsion systems for boats, yachts and other watercraft - Installation requirements
• SS-EN-17763 - Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
• SS-EN-29775 - Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)
• SS-EN-29775-AM1 - Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)
• SS-EN-ISO-11105 - Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997)
• SS-EN-ISO-18854 - Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
• SS-EN-ISO-3715-1 - Ships and marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers (ISO 3715-1:2002)
• SS-EN-ISO-3715-2 - Ships and marine technology - Propulsion plants for ships - Part 2: Vocabulary for controllable-pitch propeller plants (ISO 3715-2:2001)
• SS-EN-ISO-9775 - Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)