Document Center List of Standards on Piping Systems
ICS Code 47.020.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-F1006 - Standard Specification for Entrainment Separators for Use in Marine Piping Applications
- ASTM-F1007 - Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
- ASTM-F1020 - Standard Specification for Line-Blind Valves for Marine Applications
- ASTM-F1030 - Standard Practice for Selection of Valve Operators
- ASTM-F1121 - Standard Specification for International Shore Connections for Marine Fire Applications
- ASTM-F1139 - Standard Specification for Steam Traps and Drains
- ASTM-F1155 - Standard Practice for Selection and Application of Piping System Materials
- ASTM-F1271 - Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
- ASTM-F1370 - Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
- ASTM-F1508 - Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
- ASTM-F1510 - Standard Specification for Rotary Positive Displacement Pumps, Ships Use
- ASTM-F1511 - Standard Specification for Mechanical Seals for Shipboard Pump Applications
- ASTM-F1548 - Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
- ASTM-F885 - Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS
1 4 - ASTM-F986 - Standard Specification for Suction Strainer Boxes
- ASTM-F991 - Specification for Docking/Drain Plug and Boss Assemblies
- ASTM-F993 - Standard Specification for Valve Locking Devices
- ASTM-F994 - Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections
BSI:
- BS-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems
- BS-EN-12827 - Inland navigation vessels. Connections for the transfer of diesel oil
- BS-EN-1306-TC - Tracked Changes. Inland navigation vessels. Connections for the discharge of waste water
- BS-EN-16865 - Inland navigation vessels. Connections and assembled hoses for the transfer of potable water
- BS-EN-17243 - Cathodic protection of internal surfaces of metallic tanks, structures, equipment, and piping containing seawater
- BS-EN-ISO-14726-1 - Ships & Marine Technology, Identification Colours for the Content of Piping Systems, M
- BS-EN-ISO-15364 - Ships and marine technology. Pressure/vacuum valves for cargo tanks
- BS-EN-ISO-15540 - Ships and marine technology. Fire resistance of hose assemblies. Test methods
- BS-EN-ISO-15541 - Ships and marine technology. Fire resistance of hose assemblies. Requirements for the test bench
- BS-ISO-15364 - Ships and marine technology. Pressure-vacuum valves for cargo tanks and devices to prevent the passage of flame into cargo tanks
- BS-ISO-15540 - Ships and marine technology. Fire resistance of non-metallic hose assemblies and non-metallic compensators. Test methods
- BS-ISO-15541 - Ships and marine technology. Fire resistance of non-metallic hose assemblies and non-metallic compensators. Requirements for the test bench
- BS-ISO-15837 - Ships and marine technology. Gasketed mechanical couplings for use in piping systems. Performance specification
- BS-ISO-15838 - Ships and marine technology. Fittings for use with gasketed mechanical couplings used in piping applications. Performance specification.
- BS-ISO-15840 - Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
- BS-ISO-17602 - Ships and marine technology. Metal valves for use in flanged pipe. Face-to-face and centre-to-face dimensions
- BS-ISO-18139 - Ships and marine technology. Globe valves for use in low temperature applications. Design and testing requirements
- BS-ISO-18154 - Ships and marine technology. Safety valve for cargo tanks of LNG carriers. Design and testing requirements
- BS-ISO-19037 - Ships and marine technology. Gate valves for use in low temperature applications. Design and testing requirements
- BS-ISO-19921 - Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Test methods
- BS-ISO-19922 - Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Requirements on the test bench
- BS-ISO-20602 - Ships and marine technology. Check valves for use in low temperature applications. Design and testing requirements
- BS-ISO-21157 - Ships and marine technology. Ball valves for use in low temperature applications. Design and testing requirements
- BS-ISO-21159 - Ships and marine technology. Butterfly valves for use in low temperature applications. Design and testing requirements
- BS-ISO-21562 - Ships and marine technology. Bunker fuel mass flow meters on receiving vessel. Requirements
- BS-ISO-23212 - Ships and marine technology. Flange connection for fuel and lubrication oil bunkering. Basic dimensions and technical requirements
- BS-ISO-24224 - Ships and marine technology. Tanker cargo manifold shore connection. Technical requirements
- BS-ISO-8277 - Ships and marine technology. Pipework and machinery. Information transfer
- BS-MA-18 - Specification for salt water piping systems in ships
- BS-MA-26 - Specification for Suction Strainers
- BS-MA-27 - Specification for Sight-Flow Indicators for Tank Overflow Systems
- BS-MA-49 - Summary & Application of Carbon Steel Tubes for Marine Pipework Systems
- BS-MA-5 - Specification for brass service nameplates for valves
- BS-MA-60 - Summary & Application of Copper & Copper Alloy Tubes for Ships' Pipework Systems
- BS-MA-61 - Specification for Bilge Drain & Suction Hats
- BS-MA-62 - Specification for Weed Grids for Sea Inlets
- BS-MA-9 - Flanges, Bolting & Gaskets for Exhaust Gas, Piping for Diesel Engines & Boiler Uptakes
- BS-MA-94 - Specification for Thermal Insulation for Marine Piping Systems
- CWA-15375 - Separators for Marine Residual Fuel, Performance Testing Using Specific Test Oil
ISO:
- ISO-14726 - Ships and marine technology - Identification colours for the content of piping systems
- ISO-14726-1 - Ships and marine technology -- Identification colours for the content of piping systems -- Part 1: Main colours and media
- ISO-14726-2 - Ships and marine technology - Identification colours for the content of piping systems - Part 2: Additional colours for different media and/or functions
- ISO-15364 - Ships and marine technology - Pressure-vacuum valves for cargo tanks and devices to prevent the passage of flame into cargo tanks
- ISO-15540 - Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Test methods
- ISO-15541 - Ships and marine technology - Fire resistance of non-metallic hose assemblies and non-metallic compensators - Requirements for the test bench
- ISO-15748-1 - Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design
- ISO-15748-2 - Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation
- ISO-15749-1 - Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design
- ISO-15749-2 - Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems
- ISO-15749-3 - Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems
- ISO-15749-4 - Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes
- ISO-15749-5 - Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools
- ISO-15837 - Ships and marine technology - Gasketed mechanical couplings for use in piping systems - Performance specification
- ISO-15838 - Ships and marine technology - Fittings for use with gasketed mechanical couplings used in piping applications - Performance specification
- ISO-15840 - Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
- ISO-17602 - Ships and marine technology - Metal valves for use in flanged pipe - Face-to-face and centre-to-face dimensions
- ISO-18139 - Ships and marine technology - Globe valves for use in low temperature applications - Design and testing requirements
- ISO-18154 - Ships and marine technology - Safety valve for cargo tanks of LNG carriers - Design and testing requirements
- ISO-19037 - Ships and marine technology - Gate valves for use in low temperature applications - Design and testing requirements
- ISO-19690-1 - Disc springs - Part 1: Calculation
- ISO-19921 - Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods
- ISO-19922 - Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements imposed on the test bench
- ISO-20602 - Ships and marine technology - Check valves for use in low temperature applications - Design and testing requirements
- ISO-20602-AM1 - - Amendment 1: Ships and marine technology - Check valves for use in low temperature applications - Design and testing requirements - Amendment 1
- ISO-21159 - Ships and marine technology - Butterfly valves for use in low temperature applications - Design and testing requirements
- ISO-21562 - Ships and marine technology - Bunker fuel mass flow meters on receiving vessel - Requirements
- ISO-23055 - Ships and marine technology - Design requirements for international ballast water transfer connection flange
- ISO-23212 - Ships and marine technology - Flange connection for fuel and lubrication oil bunkering - Basic dimensions and technical requirements
- ISO-24224 - Ships and marine technology - Tanker cargo manifold shore connection - Technical requirements
- ISO-5483 - Ships and marine technology - Drain facilities from oil and water tanks
- ISO-5620-1 - Shipbuilding and marine structures -- Filling connection for drinking water tanks -- Part 1: General requirements
- ISO-5620-2 - Shipbuilding and marine structures -- Filling connection for drinking water tanks -- Part 2: Components
- ISO-5621 - Shipbuilding -- Bilge mud boxes for machinery spaces and tunnels -- General design characteristics
- ISO-5625 - Shipbuilding -- Welded bulkhead pieces with flanges for steel pipework -- PN 6, PN 10 and PN 16
- ISO-6454 - Shipbuilding -- Strum boxes
- ISO-8277 - Ships and marine technology - Pipework and machinery - Information transfer
Other SDOs:
- DIN-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
- DIN-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2013
- DIN-EN-ISO-15748-1 - Part 1: Planning & Design, Ships & Marine Technology, Potable Water Supply on Ships &
- DIN-EN-ISO-15748-2 - Part 2: Method of Calculation, Ships & Marine Technology, Potable Water Supply on Ship
- DIN-EN-ISO-15749-1 - Part 1: Sanitary Drainage-System Design, Ships & Marine Technology, Drainage Systems O
- DIN-EN-ISO-15749-2 - Part 2: Sanitary Drainage, Drain Piping for Gravity Systems, Ships & Marine Technology
- DIN-EN-ISO-15749-3 - Part 3: Sanitary Drainage, Drain Piping for Vacuum Systems, Ships & Marine Technology
- DIN-EN-ISO-15749-4 - Part 4: Sanitary Drainage, Sewage Disposal Pipes, Ships & Marine Technology, Drainage
- DIN-EN-ISO-15749-5 - Part 5: Drainage of Decks, Cargo Spaces & Swimming Pools, Ships & Marine Technology, D
- EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
- EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
- EN-12827 - Inland Navigation Vessels, Connections for the Transfer of Diesel Oil
- EN-1305 - Inland navigation vessels - Connections for the discharge of oily mixture
- EN-1306 - Inland navigation vessels - Connections for the discharge of waste water
- EN-16865 - Inland navigation vessels - Connections and assembled hoses for the transfer of potable water
- EN-ISO-14726-1 - Ships & Marine Technology, Identification Colours for the Content of Piping Systems, M
- EN-ISO-15364 - Ships & Marine Technology, Pressure/Vacuum Valves for Cargo Tanks
- EN-ISO-15748-2 - Part 2: Method of Calculation, Ships & Marine Technology, Potable Water Supply on Ship
- EN-ISO-15749-1 - Part 1: Sanitary Drainage-System Design, Ships & Marine Technology, Drainage Systems O
- EN-ISO-15749-2 - Part 2: Sanitary Drainage, Drain Piping for Gravity Systems, Ships & Marine Technology
- EN-ISO-15749-3 - Part 3: Sanitary Drainage, Drain Piping for Vacuum Systems, Ships & Marine Technology
- EN-ISO-15749-4 - Part 4: Sanitary Drainage, Sewage Disposal Pipes, Ships & Marine Technology, Drainage
- EN-ISO-15749-5 - Part 5: Drainage of Decks, Cargo Spaces & Swimming Pools, Ships & Marine Technology, D
- SIS-CEN/TS-15364 - Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test
- SIS-CWA-17540 - Ships and marine technology - Specification for bunkering of methanol fuelled vessels
- SS-780005 - Shipbuilding - Scupper without waterseal - Threaded connection
- SS-780007 - Shipbuilding - Scupper with 75 mm waterseal and straight body end
- SS-780008 - Shipbuilding - Scupper without waterseal and withscrew-top
- SS-780222 - Shipbuilding - Gravity sewage system - Design anddimensioning
- SS-780224 - Shipbuilding - Gravity sewage system - Installation of components etc.
- SS-780225 - Shipbuilding - Expansion tanks for sewage system in ships
- SS-780234 - Shipbuilding - Deck and bulkhead pipe sleeves
- SS-780244 - Shipbuilding - Tanker manifolds and associated equipment
- SS-780324 - Shipbuilding - Scupper without waterseal for placing outside of a deckhouse
- SS-780341 - Shipbuilding - Drinking water and waste water system - Location of sanitary valves and sanitary units
- SS-780499 - Shipbuilding - Expansion elements - Directions for assembly and insulation
- SS-780501 - Shipbuilding - Protective cover for expansion element
- SS-782001 - Shipbuilding - Flanges, blank flange, PN 16 - Mating dimensions, ISO 2229 class 150
- SS-782005 - Shipbuilding - Distance pieces, PN 16 - Mating dimensions, PN 16 and ISO 2229 class 150
- SS-782006 - Shipbuilding - Adapters, straight, PN 16 - Matingdimensions, ISO 2229 class 150
- SS-782007 - Shipbuilding - Reducers, PN 16 - Mating dimensions, ISO 2229 class 150
- SS-782015 - Shipbuilding - Plug with hexagon socket
- SS-782018 - Shipbuilding - Drinking- and hot water systems for cargo ships
- SS-782025 - Shipbuilding - Scupper without waterseal - Weldedconnection
- SS-782034 - Shipbuilding - Scupper with 75 mm waterseal and angle body end
- SS-782041 - Shipbuilding - Vacuum sewage system - Design and dimensioning
- SS-789001 - Shipbuilding - Scuppers - Summary and installation
- SS-EN-1123-3 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
- SS-EN-1124-4 - Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
- SS-EN-12827 - Inland navigation vessels - Connections for the transfer of diesel oil
- SS-EN-1305 - Inland navigation vessels - Connections for the discharge of oily mixture
- SS-EN-1306 - Inland navigation vessels - Connections for the discharge of waste water
- SS-EN-16865 - Inland navigation vessels - Connections and assembled hoses for the transfer of potable water
- SS-EN-17213 - Windows and doors - Environmental Product Declarations - Product category rules for windows and pedestrian doorsets
- SS-EN-17243 - Cathodic protection of internal surfaces of metallic tanks, structures, equipment, and piping containing seawater
- SS-EN-17763 - Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- SS-EN-28849 - Small craft - Electrically operated bilge-pumps (ISO 8849:1990)
- SS-EN-28849-AM1 - Small craft - Electrically operated bilge-pumps (ISO 8849:1990)
- SS-EN-ISO-14726-1 - Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media (ISO 14726-1:1999)
- SS-EN-ISO-15364 - Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000)
- SS-EN-ISO-15540 - Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999)
- SS-EN-ISO-15541 - Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999)
- SS-EN-ISO-15748-1 - Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002)
- SS-EN-ISO-15748-2 - Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation
- SS-EN-ISO-15749-1 - Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design (ISO 15749-1:2004)
- SS-EN-ISO-15749-2 - Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system (ISO 15749-2:2004)
- SS-EN-ISO-15749-3 - Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system (ISO 15749-3:2004)
- SS-EN-ISO-15749-4 - Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO 15749-4:2004)
- SS-EN-ISO-15749-5 - Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools (ISO 15749-5:2004)
- SS-EN-ISO-5620-1 - Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements (ISO 5620-1:1992)
- SS-EN-ISO-5620-2 - Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components (ISO 5620-2:1992)
- SS-ISO-14726-1 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
- SS-ISO-15540 - Ships and marine technology - Fire resistance of hose assemblies - Test methods
- SS-ISO-15541 - Ships and marine tehnology - Fire resistance of hose assemblies - Requirements for the test bench
- SS-ISO-20602 - Ships and marine technology - Check valves for use in low temperature applications - Design and testing requirements (ISO 20602:2019, IDT)
- SS-ISO-20602-AM1 - Ships and marine technology - Check valves for use in low temperature applications - Design and testing requirements - Amendment 1 (ISO 20602/Amd 1:2021, IDT)
- UNE-EN-16865 - Inland navigation vessels - Connections and assembled hoses for the transfer of potable water