Document Center List of Standards on Aircraft And Space Vehicles In General Including Aircraft Performance, Flight Dynamics, Etc. Air Transport, See 03.220.50
ICS Code 49.020
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D6399 - Standard Guide for Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins
- ASTM-E1548 - Standard Practice for Preparation of Aerospace Contamination Control Plans
- ASTM-E2217 - Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
- ASTM-F1118 - Standard Specification for National Air Medical Transport Units Resources Catalog (Withdrawn 2007)
- ASTM-F1119 - Specification for Rotary Wing Basic Life Support Transport Units (Withdrawn 2000)
- ASTM-F1124 - Specification for Rotary Wing Advanced Life Support Transport Units (Withdrawn 2000)
- ASTM-F1146 - Specification for Rotary Wing Specialized Medical Transport Units (Withdrawn 2000)
- ASTM-F1274 - Specification for Fixed Wing Advanced Life Support Transport Units (Withdrawn 2000)
- ASTM-F1283 - Specification for Fixed Wing Specialized Medical Transport Units (Withdrawn 2000)
- ASTM-F2156 - Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
- ASTM-F2240 - Standard Specification for Manufacturer Quality Assurance Program for Powered Parachute Aircraft (Withdrawn 2014)
- ASTM-F2241 - Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft (Withdrawn 2023)
- ASTM-F2242 - Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft
- ASTM-F2243 - Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft
- ASTM-F2244 - Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft
- ASTM-F2245 - Standard Specification for Design and Performance of a Light Sport Airplane
- ASTM-F2279 - Standard Practice for Quality Assurance in the Manufacture of Fixed Wing Light Sport Aircraft (Withdrawn 2014)
- ASTM-F2295 - Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft (Withdrawn 2019)
- ASTM-F2316 - Standard Specification for Airframe Emergency Parachutes
- ASTM-F2317 - Standard Specification for Design of Weight-Shift-Control Aircraft
- ASTM-F2318 - Standard Specification for Rotary Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
- ASTM-F2319 - Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013)
- ASTM-F2352 - Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft
- ASTM-F2353 - Standard Specification for Manufacturer Quality Assurance Program for Lighter-Than-Air Light Sport Aircraft (Withdrawn 2014)
- ASTM-F2354 - Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft (Withdrawn 2022)
- ASTM-F2355 - Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
- ASTM-F2356 - Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
- ASTM-F2395 - Standard Terminology for Unmanned Air Vehicle Systems (Withdrawn 2014)
- ASTM-F2415 - Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft (Withdrawn 2023)
- ASTM-F2425 - Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
- ASTM-F2426 - Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft
- ASTM-F2427 - Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft
- ASTM-F2429 - Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
- ASTM-F2447 - Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
- ASTM-F2448 - Standard Practice for Manufacturer Quality Assurance System for Weight-Shift-Control Aircraft (Withdrawn 2014)
- ASTM-F2449 - Standard Specification for Manufacturer Quality Assurance Program for Light Sport Gyroplane Aircraft (Withdrawn 2014)
- ASTM-F2457 - Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft
- ASTM-F2483 - Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
- ASTM-F2500 - Standard Practice for Unmanned Aircraft System (UAS) Visual Range Flight Operations (Withdrawn 2016)
- ASTM-F2501 - Standard Practices for Unmanned Aircraft System Airworthiness (Withdrawn 2015)
- ASTM-F2505 - Standard Practice for Application of Federal Aviation Administration (FAA) Federal Aviation Regulations Part 21 Requirements to Unmanned Aircraft Systems (UAS) (Withdrawn 2014)
- ASTM-F2512 - Standard Practice for Quality Assurance in the Manufacture of Light Unmanned Aircraft System (Withdrawn 2016)
- ASTM-F2564 - Standard Specification for Design and Performance of a Light Sport Glider
- ASTM-F2584 - Standard Practice for Maintenance and Development of Maintenance Manuals for Light Unmanned Aircraft System (UAS) (Withdrawn 2015)
- ASTM-F2585 - Standard Specification for Design and Performance of Pneumatic-Hydraulic Unmanned Aircraft System (UAS) Launch System (Withdrawn 2017)
- ASTM-F2626 - Standard Terminology for Light Sport Aircraft (Withdrawn 2018)
- ASTM-F2635 - Standard Classification for Unmanned Aircraft Pilot Certification (Withdrawn 2014)
- ASTM-F2636 - Standard Practice for Commercial Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous (Withdrawn 2014)
- ASTM-F2745 - Standard Specification for Required Product Information to be Provided with an Airplane
- ASTM-F2746 - Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane
- ASTM-F2839 - Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
- ASTM-F2849 - Standard Practice for Handling of Unmanned Aircraft Systems at Divert Airfields
- ASTM-F2908 - Standard Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS)
- ASTM-F2909 - Standard Specification for Continued Airworthiness of Lightweight Unmanned Aircraft Systems
- ASTM-F2910 - Standard Specification for Design and Construction of a Small Unmanned Aircraft System (sUAS)
- ASTM-F2911 - Standard Practice for Production Acceptance of Small Unmanned Aircraft System (sUAS) (Withdrawn 2023)
- ASTM-F2930 - Standard Guide for Compliance with Light Sport Aircraft Standards
- ASTM-F2972 - Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System
- ASTM-F3002 - Standard Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS)
- ASTM-F3003 - Standard Specification for Quality Assurance of a Small Unmanned Aircraft System (sUAS) (Withdrawn 2023)
- ASTM-F3035 - Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
- ASTM-F3060 - Standard Terminology for Aircraft
- ASTM-F3061 - Standard Specification for Systems and Equipment in Small Aircraft
- ASTM-F3082 - Standard Specification for Weights and Centers of Gravity of Aircraft
- ASTM-F3083 - Standard Specification for Emergency Conditions, Occupant Safety and Accommodations
- ASTM-F3093 - Standard Specification for Aeroelasticity Requirements
- ASTM-F3115 - Standard Specification for Structural Durability for Small Airplanes
- ASTM-F3116 - Standard Specification for Design Loads and Conditions
- ASTM-F3117 - Standard Specification for Crew Interface in Aircraft
- ASTM-F3173 - Standard Specification for Aircraft Handling Characteristics
- ASTM-F3174 - Standard Specification for Establishing Operating Limitations and Information for Aeroplanes
- ASTM-F3178 - Standard Practice for Operational Risk Assessment of Small Unmanned Aircraft Systems (sUAS)
- ASTM-F3179 - Standard Specification for Performance of Aircraft
- ASTM-F3180 - Standard Specification for Low-Speed Flight Characteristics of Aircraft
- ASTM-F3196 - Standard Practice for Seeking Approval for Beyond Visual Line of Sight (BVLOS) Small Unmanned Aircraft System (sUAS) Operations
- ASTM-F3198 - Standard Specification for Light Sport Aircraft Manufacturer’s Continued Operational Safety (COS) Program
- ASTM-F3199 - Standard Guide for Wing Interface Documentation for Weight Shift Control Aircraft
- ASTM-F3201 - Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
- ASTM-F3205 - Standard Practice for Independent Audit Program for Light Aircraft Manufacturers
- ASTM-F3227 - Standard Specification for Environmental Systems in Small Aircraft
- ASTM-F3228 - Standard Specification for Flight Data and Voice Recording in Small Aircraft
- ASTM-F3229 - Standard Practice for Static Pressure System Tests in Small Aircraft
- ASTM-F3230 - Standard Practice for Safety Assessment of Systems and Equipment in Small Aircraft
- ASTM-F3231 - Standard Specification for Electrical Systems for Aircraft with Combustion Engine Electrical Power Generation
- ASTM-F3232 - Standard Specification for Flight Controls in Small Aircraft
- ASTM-F3233 - Standard Specification for Instrumentation in Small Aircraft
- ASTM-F3234 - Standard Specification for Exterior Lighting in Small Aircraft
- ASTM-F3235 - Standard Specification for Aircraft Storage Batteries
- ASTM-F3236 - Standard Specification for High Intensity Radiated Field (HIRF) Protection in Small Aircraft
- ASTM-F3245 - Standard Guide for Aircraft Electronics Technician Personnel Certification
- ASTM-F3246 - Standard Specification for Quality Assurance for Manufacturers of Aircraft Systems
- ASTM-F3262 - Standard Classification System for Small Unmanned Aircraft Systems (sUASs) for Land Search and Rescue
- ASTM-F3264 - Standard Specification for Normal Category Aeroplanes Certification
- ASTM-F3266 - Standard Guide for Training for Remote Pilot in Command of Unmanned Aircraft Systems (UAS) Endorsement
- ASTM-F3269 - Standard Practice for Methods to Safely Bound Behavior of Aircraft Systems Containing Complex Functions Using Run-Time Assurance
- ASTM-F3298 - Standard Specification for Design, Construction, and Verification of Lightweight Unmanned Aircraft Systems (UAS)
- ASTM-F3330 - Standard Specification for Training and the Development of Training Manuals for the UAS Operator
- ASTM-F3331 - Standard Practice for Aircraft Water Loads
- ASTM-F3362 - Standard Guide for Onboard Communication & Safety Systems Personnel Certification
- ASTM-F3365 - Standard Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems
- ASTM-F3367 - Standard Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft
- ASTM-F814 - Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications (Withdrawn 1995)
BSI:
- BS-185-1 - Glossary of aeronautical and astronautical terms
- BS-185-15 - Glossary of aeronautical and astronautical terms
- BS-185-16 - Glossary of aeronautical and astronautical terms
- BS-185-17 - Glossary of aeronautical and astronautical terms
- BS-185-2 - Glossary of aeronautical and astronautical terms
- BS-185-4 - Glossary of aeronautical and astronautical terms
- BS-185-5 - Glossary of aeronautical and astronautical terms
- BS-185-6 - Glossary of aeronautical and astronautical terms
- BS-185-7 - Glossary of aeronautical and astronautical terms
- BS-2C-7 - Specification for aircraft tyre valves: interchangeability dimensions
- BS-5727 - Method for describing aircraft noise heard on the ground
- BS-EN-13718-1 - Medical vehicles and their equipment. Air ambulances
- BS-EN-13718-2 - Medical vehicles and their equipment. Air ambulances
- BS-EN-2000 - Quality assurance. EN aerospace products. Approval of the quality system of manufacturers
- BS-EN-3042 - Quality Assurance - En Aerospace Products - Qualification Procedure
- BS-EN-3275 - Aerospace series. Pipe coupling 830' up to 28 000 kPa. Dynamic beam seal. Metric series. Technical specification
- BS-EN-4179 - Aerospace series. Qualification and approval of personnel for non-destructive testing
- BS-EN-4179-TC - Tracked Changes. Aerospace series. Qualification and approval of personnel for non-destructive testing
- BS-EN-4408-1 - Aerospace series. Technical drawings. Representation of parts made of composite materials
- BS-EN-4408-2 - Aerospace series. Technical drawings. Representation of parts made of composite materials
- BS-EN-4408-3 - Aerospace series. Technical drawings. Representation of parts made of composite materials
- BS-EN-4408-4 - Aerospace series. Technical drawings. Representation of parts made of composite materials
- BS-EN-4408-5 - Aerospace series. Technical drawings. Representation of parts made of composite materials
- BS-EN-4408-6 - Aerospace series. Technical drawings. Representation of parts made of composite materials
- BS-EN-4617 - Aerospace series. Recommended practices for standardizing company standards
- BS-EN-4731 - Aerospace series. Spectral quality of LED luminaires used with photoluminescent marking systems
- BS-EN-4855-01 - Aerospace series. ECO efficiency of catering equipment
- BS-EN-4855-02 - Aerospace series. ECO efficiency of catering equipment
- BS-EN-4855-03 - Aerospace series. ECO efficiency of catering equipment
- BS-EN-4855-04 - Aerospace series. ECO efficiency of catering equipment
- BS-EN-9100 - Quality Management Systems. Requirements for Aviation, Space and Defence Organizations
- BS-EN-9100-TC - Tracked Changes. Quality Management Systems. Requirements for Aviation, Space and Defence Organizations
- BS-EN-9101 - Quality Management Systems. Audit Requirements for Aviation, Space, and Defence Organisations
- BS-EN-9102 - Aerospace series. Quality systems. First article inspection requirements
- BS-EN-9103 - Aerospace series. Quality management systems. Variation management of key characteristics
- BS-EN-9104 - Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs
- BS-EN-9104-001 - Aerospace series. Quality management systems
- BS-EN-9104-002 - Aerospace series. Quality management systems
- BS-EN-9104-002-TC - Tracked Changes. Aerospace series. Quality management systems
- BS-EN-9104-003 - Aerospace series. Quality management systems
- BS-EN-9110 - Quality Management Systems. Requirements for Aviation Maintenance Organizations
- BS-EN-9110-TC - Tracked Changes. Quality Management Systems. Requirements for Aviation Maintenance Organizations
- BS-EN-9111 - Aerospace series. Quality management systems. Assessment applicable to maintenance organizations
- BS-EN-9114 - Aerospace series. Quality systems. Direct Ship. Guidance for aerospace companies
- BS-EN-9114-TC - Tracked Changes. Aerospace series. Quality systems. Direct Ship. Guidance for aerospace companies
- BS-EN-9115 - Quality Management Systems. Requirements for Aviation, Space and Defense Organizations. Deliverable Software (Supplement to EN 9100)
- BS-EN-9116 - Aerospace series. Notice of Change (NOC) Requirements
- BS-EN-9117 - Aerospace series. Delegated Product Release Verification
- BS-EN-9120 - Quality Management Systems. Requirements for Aviation, Space and Defence Distributors
- BS-EN-9121 - Aerospace series. Quality management systems. Assessment applicable to stockist distributors
- BS-EN-9131 - Aerospace series. Quality Management Systems. Nonconformance Data Definition and Documentation
- BS-EN-9132 - Aerospace series. Quality management systems. Data Matrix Quality Requirements for Parts Marking
- BS-EN-9133 - Aerospace series. Quality Management System. Qualification Procedure for Aerospace Standard Products
- BS-EN-9133-TC - Tracked Changes. Aerospace series. Quality Management System. Qualification Procedure for Aerospace Standard Products
- BS-EN-9136 - Aerospace series. Root cause analysis and problem solving (9S Methodology)
- BS-EN-9138 - Aerospace Series. Quality Management Systems. Statistical Product. Acceptance Requirements
- BS-EN-9145 - Aerospace series. Requirements for Advanced Product Quality Planning and Production Part Approval Process
- BS-EN-9146 - Aerospace series. Foreign Object Damage (FOD) Prevention Program. Requirements for Aviation, Space, and Defence Organizations
- BS-EN-9147 - Aerospace series. Management of unsalvageable items
- BS-EN-9162 - Aerospace series. Aerospace Operator Self-Verification Programs
- BS-EN-9208 - Aerospace series. Programme management. Expression of need. Guidance on and format for (Need) Technical Specification
- BS-EN-9223-100 - Programme Management. Configuration Management
- BS-EN-9223-101 - Programme Management. Configuration Management
- BS-EN-9223-102 - Programme Management. Configuration Management
- BS-EN-9223-103 - Programme Management. Configuration Management
- BS-EN-9223-104 - Programme Management. Configuration Management
- BS-EN-9223-105 - Programme Management. Configuration Management
- BS-EN-9239 - Aerospace series. Programme Management. Guide for the risk management
- BS-EN-9300-004 - Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data
- BS-EN-9300-005 - Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Authentication and Verification
- BS-EN-9300-007 - Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Terms and References
- BS-EN-9300-011 - Aerospace series. LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data
- BS-EN-9300-012 - Aerospace series. LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data
- BS-EN-9300-013 - Aerospace series. LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data
- BS-EN-9300-014 - Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data
- BS-EN-9300-015 - Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data
- BS-EN-9300-110 - Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data
- BS-EN-9320 - Aerospace series. Programme Management. General guidelines for acquisition and supply of open systems
- BS-EN-9721 - Aerospace series. General recommendation for the BIT Architecture in an integrated system
- BS-EN-IEC-61265 - Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
- BS-EN-IEC-61265-TC - Tracked Changes. Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
- BS-EN-ISO-20785-1 - Dosimetry for exposures to cosmic radiation in civilian aircraft
- BS-EN-ISO-20785-2 - Dosimetry for exposures to cosmic radiation in civilian aircraft
- BS-EN-ISO-20785-3 - Dosimetry for exposures to cosmic radiation in civilian aircraft
- BS-EN-ISO-20785-4 - Dosimetry for exposures to cosmic radiation in civilian aircraft. Validation of codes.
- BS-ISO-16192 - Space systems. Experience gained in space projects (lessons learned). Principles and guidelines
- BS-ISO-16192-TC - Tracked Changes. Space systems. Experience gained in space projects (lessons learned). Principles and guidelines
- BS-ISO-20785-1 - Dosimetry for exposures to cosmic radiation in civilian aircraft. Conceptual basis for measurements
- BS-ISO-20785-3 - Dosimetry for exposures to cosmic radiation in civilian aircraft. Measurements at aviation altitudes
- BS-ISO-20785-4 - Dosimetry for exposures to cosmic radiation in civilian aircraft
- BS-ISO-21384-2 - Unmanned aircraft systems
- BS-ISO-21384-3 - Unmanned aircraft systems
- BS-ISO-21384-4 - Unmanned aircraft systems
- BS-ISO-21849-TC - Tracked Changes. Aircraft and space. Industrial data. Product identification and traceability
- BS-ISO-21895 - Categorization and classification of civil unmanned aircraft systems
- BS-ISO-23629-12 - UAS traffic management (UTM)
- BS-ISO-23629-7 - UAS traffic management (UTM)
- BS-ISO-23665 - Unmanned aircraft systems. Training for personnel involved in UAS operations
- BS-ISO-24356 - General requirements for tethered unmanned aircraft systems
- BS-ISO-24394 - Welding for aerospace applications. Qualification test for welders and welding operators. Fusion welding of metallic components
- BS-ISO-2685 - Aircraft. Environmental test procedure for airborne equipment. Resistance to fire in designated fire zones
- BS-ISO-5129 - Acoustics. Measurement of sound pressure levels in the interior of aircraft during flight
- BS-ISO-5224 - Rotorcrafts. Flight dynamics. Vocabulary
- BS-ISO-7295 - Tyre valves for aircraft. Interchangeability dimensions
ISO:
- ISO-1151-1 - Flight dynamics - Concepts, quantities and symbols - Part 1 : Aircraft motion relative to the air
- ISO-1151-2 - Flight dynamics - Concepts, quantities and symbols - Part 2 : Motions of the aircraft and the atmosphere relative to the Earth
- ISO-1151-2/1 - Addendum 1 to ISO 1151-2:1985
- ISO-1151-3 - Flight dynamics - Concepts, quantities and symbols - Part 3: Derivatives of forces, moments and their coefficients
- ISO-1151-4 - Flight dynamics - Concepts, quantities, and symbols - Part 4: Concepts and quantities used in the study of aircraft stability and control
- ISO-1151-5 - Flight dynamics - Concepts, quantities and symbols - Part 5 : Quantities used in measurements
- ISO-1151-6 - Terms and symbols for flight dynamics - Part 6 : Aircraft geometry
- ISO-1151-6-1 - Amendment 1 to ISO 1151-6:1982
- ISO-1151-7 - Flight dynamics - Concepts, quantities and symbols - Part 7 : Flight points and flight envelopes
- ISO-1151-8 - Flight dynamics - Vocabulary - Part 8: Dynamic behaviour of aircraft
- ISO-1151-9 - Flight dynamics - Concepts, quantities and symbols - Part 9: Models of atmospheric motions along the trajectory of the aircraft
- ISO-1151-9-1 - Amendment 1 to ISO 1151-9:1993 Turbulence
- ISO-14618 - Middle atmosphere - Global model at altitudes between 30 km and 120 km, and wind model at altitudes above 30 km
- ISO-16192 - Space systems - Experience gained in space projects (lessons learned) - Principles and guidelines
- ISO-20785-1 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements
- ISO-20785-2 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response
- ISO-20785-3 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes
- ISO-20785-4 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 4: Validation of codes
- ISO-21384-2 - Unmanned aircraft systems - Part 2: UAS components
- ISO-21384-3 - Unmanned aircraft systems - Part 3: Operational procedures
- ISO-21384-4 - Unmanned aircraft systems - Part 4: Vocabulary
- ISO-21849 - Aircraft and space - Industrial data - Product identification and traceability
- ISO-21895 - Categorization and classification of civil unmanned aircraft systems
- ISO-224 - Aircraft - Declaration of design and performance for aircraft equipment - Standard form
- ISO-23629-1 - UAS traffic management (UTM) - Part 1: Survey results on UTM
- ISO-23629-12 - UAS traffic management (UTM) - Part 12: Requirements for UTM service providers
- ISO-23629-7 - UAS traffic management (UTM) - Part 7: Data model for spatial data
- ISO-23665 - Unmanned aircraft systems - Training for personnel involved in UAS operations
- ISO-24356 - General requirements for tethered unmanned aircraft systems
- ISO-2669 - Environmental tests for aircraft equipment - Steady-state acceleration
- ISO-2671 - Environmental tests for aircraft equipment - Part 3.4 : Acoustic vibration
- ISO-2685 - Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones
- ISO-5015-2 - Unmanned aircraft systems - Part 2: Operation of vertiports for vertical take-off and landing (VTOL) unmanned aircraft (UA)
- ISO-5129 - Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
- ISO-5129-AM1 - - Amendment 1
- ISO-5224 - Rotorcrafts . Flight dynamics . Vocabulary
- ISO-5843-4 - Aerospace - List of equivalent terms - Part 4: Flight dynamics
- ISO-5843-5 - Aerospace - List of equivalent terms - Part 5: Environmental and operating conditions for aircraft equipment
- ISO-5843-6 - Aerospace - List of equivalent terms - Part 6 : Standard atmosphere
- ISO-5843-8 - Aerospace - List of equivalent terms - Part 8 : Aircraft reliability
- ISO-5843-9 - Aerospace - List of equivalent terms - Part 9 : Aircraft
- ISO-5878 - Reference atmospheres for aerospace use
- ISO-5878-1 - Amendment 1 to ISO 5878:1982
- ISO-5878/1 - Addendum 1 to ISO 5878:1982 Wind supplement
- ISO-5878/2 - Addendum 2 to ISO 5878:1982 Air humidity in the Northern Hemisphere
- ISO-7137 - Aircraft - Environmental conditions and test procedures for airborne equipment
- ISO-9662 - Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests
Other SDOs:
- EN-13718-1 - Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
- EN-13718-2 - Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
- EN-3275 - Aerospace Series, Pipe Coupling 8 Degrees 80' Up To 28000 Kpa, Dynamic Beam Seal, Metr
- EN-4179 - Aerospace series - Qualification and approval of personnel for non-destructive testing
- EN-4408-1 - Aerospace Series, Technical Drawings, Representation of Parts Made of Composite Materi
- EN-4408-2 - Aerospace Series, Technical Drawings, Representation of Parts Made of Composite Materi
- EN-4408-3 - Aerospace Series, Technical Drawings, Representation of Parts Made of Composite Materi
- EN-4408-5 - Aerospace Series, Technical Drawings, Representation of Parts Made of Composite Materi
- EN-4408-6 - Aerospace Series, Technical Drawings, Representation of Parts Made of Composite Materi
- EN-9100 - Quality Management Systems - Requirements for Aviation, Space & Defense Organization
- EN-9101 - Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations
- EN-9102 - Aerospace series - Quality systems - First article inspection requirements
- EN-9103 - Aerospace series - Quality management systems - Variation management of key characteristics
- EN-9104-001 - Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
- EN-9104-002 - Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
- EN-9104-003 - Part 003: Requirements for Aerospace Quality Management System (Aqms) Auditor Training
- EN-9110 - Quality Management Systems - Requirements for Aviation Maintenance Organizations
- EN-9114 - Aerospace series - Quality systems - Direct Ship Guidance for Aerospace Companies
- EN-9115 - Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100)
- EN-9116 - Aerospace series - Notice of Change (NOC) Requirements
- EN-9117 - Aerospace series - Delegated Product Release Verification
- EN-9120 - Quality Management Systems - Requirements for Aviation, Space & Defence Distributors
- EN-9121 - Aerospace Series - Quality Management Systems - Assessment Applicable To Stockist Dist
- EN-9131 - Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
- EN-9132 - Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking
- EN-9133 - Aerospace Series, Quality Management Systems, Qualification Procedure for Aerospace S
- EN-9136 - Aerospace series - Root cause analysis and problem solving (9S Methodology)
- EN-9162 - Aerospace series - Aerospace Operator Self-Verification Programs
- EN-9223-100 - Programme Management - Configuration Management - Part 100: A guide for the application of the principles of configuration management
- EN-9223-101 - Programme Management - Configuration Management - Part 101: Configuration identification
- EN-9223-104 - Programme Management - Configuration Management - Part 104: Configuration Control
- EN-9223-105 - Programme Management - Configuration Management - Part 105: Glossary
- EN-9239 - Aerospace series - Programme Management - Guide for the risk management
- EN-9300-003 - Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts
- EN-9300-004 - Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 004: Description methods
- EN-9300-005 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 005: Authentication and Verification
- EN-9300-007 - Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References
- EN-9300-011 - Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 011: Reference process description 'Data preparation'
- EN-9300-012 - Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 012: Reference process description 'ngest'
- EN-9300-013 - Aerospace series - LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 013: Reference process description 'Archival Storage'
- EN-9300-014 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 014: Reference process description 'Retrieval'
- EN-9300-015 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 015: Reference process description ''Removal''
- EN-9300-200 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 200: Common Concepts for LOng Term Archiving and Retrieval of Product Structure Information
- EN-9320 - Aerospace series - Programme Management - General guidelines for acquisition and supply of open systems
- EN-IEC-61265 - Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft
- EN-ISO-20785-1 - Dosimetry for exposures to cosmic radiation in civilian aircraft. Conceptual basis for measurements
- EN-ISO-20785-2 - Dosimetry for exposures to cosmic radiation in civilian aircraft. Characterization of instrument response
- EN-ISO-20785-3 - Dosimetry for exposures to cosmic radiation in civilian aircraft. Measurements at aviation altitudes
- SIS-ISO/PAS-21100 - Air cargo unit load devices - Performance requirements and test parameters (ISO/PAS 21100:2011, IDT)
- SIS-ISO/TS-21849 - Aircraft - Integrated data processing materials management - Bar coding
- SS-EN-13561 - External blinds and awnings - Performance requirements including safety
- SS-EN-13718-1 - Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
- SS-EN-13718-2 - Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
- SS-EN-2000 - Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufactures
- SS-EN-2084 - Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification
- SS-EN-2135 - Aerospace series - Steel FE-PL61 - Carburized, hardened and tempered - Bar - De ≤ 40 mm
- SS-EN-2174 - Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) - Solution treated and precipitation treated - Forgings - De ≤ 100 mm - Rm ≥ 850 MPa
- SS-EN-2234 - Aerospace series - Cable, electrical, fire resistant - Technical specification
- SS-EN-2279 - Aerospace series - Steel FE-PM37 - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 150 mm
- SS-EN-2311 - Aerospace series - Bushes with self-lubricating liner - Technical specification
- SS-EN-2321 - Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a = 150 mm
- SS-EN-2369 - Aerospace series - Wires, heat resisting alloys - Diameter 0,2 mm = D = 8 mm - Dimensions
- SS-EN-2482 - Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm
- SS-EN-2591-228 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 228: Ferrule withdrawal force
- SS-EN-2635 - Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D less than or equal to 200 mm with peripheral coarse grain control
- SS-EN-2702 - Aerospace series - Aluminium alloy AL-P6061- T6 or T62 - Drawn or extruded bar and section - a or D less than or equal to 200 mm
- SS-EN-2714-002 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: Screened and jacketed - General
- SS-EN-2714-003 - Aerospace series - Cables. electrical, single and multicore for general purpose - Operating temperatures between - 55 degrees Celsius and 260 degrees Celsius - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard
- SS-EN-2714-007 - Aerospace series - Cables. electrical, single and multicore for general purpose - Operating temperature between - 55 degrees Celsius and 260 degrees Celsius - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard
- SS-EN-2714-011 - Aerospace series - Cables. electrical, single and multicore for general purpose - Operating temperature between - 55 degrees Celsius and 260 degrees Celsius - Part 011: DM familiy, screened (spiral) and jacketed, UV laser printable - Product standard
- SS-EN-2714-012 - Aerospace series - Cables. electrical, single and multicore for general purpose - Operating temperature between - 55 degrees Celsius and 260 degrees Celsius - Part 012: DM familiy, screened (braided) and jacketed, UV laser printable - Product standard
- SS-EN-2714-013 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product standard
- SS-EN-27526 - Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infrared absorption method after induction furnace combustion
- SS-EN-2840 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD
- SS-EN-2850 - Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction
- SS-EN-2853 - Aerospace series - Current ratings for electrical cables with conductor EN 2083
- SS-EN-2899 - Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
- SS-EN-3042 - Aerospace series - Quality assurance - EN aerospace products Qualification procedure
- SS-EN-3182 - Aerospace series - Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys - Dimensions and loads
- SS-EN-3274 - Aerospace series - Pipe coupling 8°30' - Thread end - Geometric configuration
- SS-EN-3278 - Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
- SS-EN-3338 - Aerospace series - Aluminium alloy AL-P7050 - T4511 - Extruded bar and section - a or D less than or equal to 150 mm with peripheral coarse grain control
- SS-EN-3342 - Aerospace series - Aluminium alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D less than or equal to 150 mm
- SS-EN-3344 - Aerospace series - Aluminium alloy AL-P7050 - T76511 - Extruded bar and section - a or D less than or equal to 150 mm with peripheral coarse grain control
- SS-EN-3383 - Aerospace series - Rings retaining, internal, axial mounting, steel, vacuum cadmium plated
- SS-EN-3384 - Aerospace series - Rings retaining, external, axial mounting, steel, phosphated
- SS-EN-3385 - Aerospace series - Rings retaining, external, axial mounting, steel, vacuum cadmium plated
- SS-EN-3386 - Aerospace series - Rings retaining, radial mounting, steel, phosphated
- SS-EN-3417 - Aerospace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
- SS-EN-3460 - Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D = 150 mm - Rm = 390 MPa
- SS-EN-3475-306 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors
- SS-EN-3475-307 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage
- SS-EN-3475-407 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability
- SS-EN-3475-408 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance
- SS-EN-3475-411 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
- SS-EN-3475-414 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
- SS-EN-3475-415 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature
- SS-EN-3475-416 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416:Thermal stability
- SS-EN-3475-513 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
- SS-EN-3475-705 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
- SS-EN-3475-706 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability
- SS-EN-3646-003 - Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle, square flange mounting - Product standard
- SS-EN-3697 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD
- SS-EN-3698 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD
- SS-EN-3706 - Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086
- SS-EN-3707 - Aerospace series - Headless threaded plugs - Installation holes
- SS-EN-3719 - Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
- SS-EN-3745-202 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions
- SS-EN-3745-306 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling
- SS-EN-3745-401 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing
- SS-EN-3745-402 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling
- SS-EN-3745-404 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
- SS-EN-3745-406 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test
- SS-EN-3745-407 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability
- SS-EN-3745-412 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
- SS-EN-3745-503 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
- SS-EN-3825 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD
- SS-EN-3826 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD
- SS-EN-3827 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
- SS-EN-3908 - Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated
- SS-EN-4023 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°
- SS-EN-4056-003 - Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures - 65 °C to 105 °C and - 65 °C to 150 °C - Product standard
- SS-EN-4179 - Aerospace series - Qualification and approval of personnel for non-destructive testing
- SS-EN-4263 - Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa
- SS-EN-4289 - Aerospace series - Aluminium alloy AL-P7175- Forging stock
- SS-EN-4297 - Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated - Classification: 900 MPa (at ambient temperature) / 120 °C
- SS-EN-4309 - Aerospace series - Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature) / 120 °C
- SS-EN-4376 - Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm
- SS-EN-4377 - Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm
- SS-EN-4400-1 - Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 1: Aluminium and aluminium alloy plate
- SS-EN-4408-001 - Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules
- SS-EN-4408-002 - Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts
- SS-EN-4408-003 - Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials
- SS-EN-4408-004 - Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding
- SS-EN-4408-005 - Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams
- SS-EN-4408-006 - Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms
- SS-EN-4434 - Aerospace series - Copper or copper alloy conductors for electrical cables - Product standard (Normal and tight tolerances)
- SS-EN-4443 - Aerospace series - Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated, Classification: 900 MPa (at ambient temperature)/ 425 °C
- SS-EN-4531-201 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threades ring - Flush contacts - Part 201: Optical contact for EN 4641 singlemode cable -55 °C to 125 °C - Product standard
- SS-EN-4594 - Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
- SS-EN-4595 - Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
- SS-EN-4617 - Aerospace series - Recommended practices for standardising company standards
- SS-EN-4641-101 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 101: Tight structure 62,5 µm core GI fibre 0,9 mm outside diameter - Product standard
- SS-EN-4644-001 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification
- SS-EN-4652-220 - Aerospace series - Connectors, coaxial, radio frequency - Part 220: Type 2, TNC interface - Crimp version - Straight plug - Product standard
- SS-EN-4652-222 - Aerospace series - Connectors, coaxial, radio frequency - Part 222: Type 2, TNC interface - Crimp version - Square flange receptacle - Product standard
- SS-EN-4652-320 - Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard
- SS-EN-4652-412 - Aerospace series - Connectors, coaxial, radio frequency - Part 412: Type 4, C interface - Clamp nut assembly version - Square flange receptacle - Product standard
- SS-EN-4652-413 - Aerospace series - Connectors, coaxial, radio frequency - Part 413: Type 4, C interface - Clamp nut assembly version - Bulkhead receptacle - Product standard
- SS-EN-4660-001 - Aerospace series - Modular and Open Avionics Architectures - Part 001: Architecture
- SS-EN-4687 - Aerospace series - Paints and varnishes - Chromate free (non corrosion inhibiting) two-components cold curing primer - Chromate free primer for military application
- SS-EN-4688 - Aerospace series - Paints and varnishes - Corrosion resistant chromated two-components room temperature curing epoxy primer - High corrosion resistance for military application
- SS-EN-4689 - Aerospace series - Paints and varnishes - Two-components room temperature curing polyurethane finish - High flexibility and chemical agent resistance for military application
- SS-EN-4697 - Aerospace series - General and installation requirements for passenger seat fittings
- SS-EN-4702-02 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 02: Spring clamp stud combination
- SS-EN-4702-03 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking
- SS-EN-4702-04 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp
- SS-EN-4702-05 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
- SS-EN-4704 - Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
- SS-EN-4708-104 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 104: Semi-rigid polyvinylidene fluoride (PDVF) - Operating temperature - 55 °C to 175 °C - Product Standard
- SS-EN-4725 - Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a ≤ 150 mm
- SS-EN-4731 - Aerospace series - Spectral quality of LED luminaires used with photoluminescent marking systems
- SS-EN-4806 - Aerospace series - Flange couplings - Weld coupling, straight, in nickel alloy - Inch series
- SS-EN-4817 - Aerospace series - Passive UHF RFID tags intended for aircraft use
- SS-EN-4818 - Aerospace series - Passive HF RFID tags intended for aircraft use
- SS-EN-4819 - Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use
- SS-EN-4826 - Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
- SS-EN-4830-001 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 001: Technical specification
- SS-EN-4830-002 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 002: Specification of performance
- SS-EN-4830-003 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 003: Module - Product standard
- SS-EN-4830-004 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 004: Extraction tool - Product standard
- SS-EN-4832 - Aerospace series - Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting and Ring-locked fitting-reducer - Inch Series - Technical specification
- SS-EN-4835 - Aerospace series - Installation and removal requirements for Ring locked fitting and reducer, 24° Cone up to 35 000 kPa (5 080 psi) - Inch Series
- SS-EN-4836 - Aerospace series - Adaptor, Pipe coupling 24° Cone up to 35 000 kPa (5 080 psi) Ring-locked fitting - Reducer - Flareless End - Inch Series - Extra Fine Thread Pitch
- SS-EN-4838-004 - Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 004: With signal contact - Product standard
- SS-EN-4838-005 - Aerospace series - Arc fault circuit breakers, single-pole, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz Constant Frequency - Part 005: With polarized signal contact - Product standard
- SS-EN-4839-001 - Aerospace series - Arc fault circuit breakers, three-poles, temperature compensated, rated current 3 A to 25 A - 115 V a.c. 400 Hz constant frequency - Part 001: Technical specification
- SS-EN-4839-003 - Aerospace series - Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency - Part 003: Without auxiliary contacts - Product standard
- SS-EN-4840-001 - Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification
- SS-EN-4855-01 - Aerospace series - ECO efficiency of catering equipment - Part 01: General conditions
- SS-EN-4855-02 - Aerospace series - ECO efficiency of catering equipment - Part 02: Oven equipment
- SS-EN-4855-03 - Aerospace series - ECO efficiency of catering equipment - Part 03: Chilling equipment
- SS-EN-4855-04 - Aerospace series - ECO efficiency of catering equipment - Part 04: Beverage makers
- SS-EN-6037 - Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength
- SS-EN-6049-001 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
- SS-EN-6049-009 - Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C - Product standard
- SS-EN-6059-303 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids
- SS-EN-6059-309 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 309: Fire resistance when fitted on a cable bundle
- SS-EN-6059-503 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve
- SS-EN-6064 - Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
- SS-EN-6080 - Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
- SS-EN-6081 - Aerospace series - Rivet, universal head, close tolerance - Inch series
- SS-EN-6101 - Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
- SS-EN-6105 - Aerospace series - Stud with shoulder
- SS-EN-6109 - Aerospace series - Static seal elements elastomer, moulded, phosphate ester resistant - Technical specification
- SS-EN-6123 - Aerospace series - Fitting end, 24° internal cone, external thread, flareless type - Extra fine thread pitch - Inch series - Design standard
- SS-EN-6126 - Aerospace series - Fitting end, 24° internal cone, external thread, flareless type, size -32 tube diameter D=2 inches (D=50,8 mm) extra fine thread pitch inch series - Inch series - Design standard
- SS-EN-6129 - Aerospace series - Blind bolt, protruding head, high strength, pulltype
- SS-EN-9100 - Quality Management Systems - Requirements for Aviation, Space and Defence Organizations
- SS-EN-9101 - Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations
- SS-EN-9102 - Aerospace series - Quality systems - First article inspection requirements
- SS-EN-9103 - Aerospace series - Quality management systems - Variation management of key characteristics
- SS-EN-9104 - Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs
- SS-EN-9104-001 - Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
- SS-EN-9104-002 - Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
- SS-EN-9104-003 - Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification
- SS-EN-9107 - Aerospace series - Quality systems - Direct Delivery Authorization - Guidance for Aerospace Companies
- SS-EN-9110 - Quality Management Systems - Requirements for Aviation Maintenance Organizations
- SS-EN-9111 - Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000)
- SS-EN-9114 - Aerospace series - Quality systems - Direct Ship - Guidance for aerospace companies
- SS-EN-9115 - Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100)
- SS-EN-9116 - Aerospace series - Notice of Change (NOC) Requirements
- SS-EN-9117 - Aerospace series - Delegated Product Release Verification
- SS-EN-9120 - Quality Management Systems - Requirements for Aviation, Space and Defence Distributors
- SS-EN-9121 - Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000)
- SS-EN-9130 - Aerospace series - Quality systems - Record retention
- SS-EN-9131 - Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
- SS-EN-9132 - Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking
- SS-EN-9133 - Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
- SS-EN-9136 - Aerospace series - Root cause analysis and problem solving (9S Methodology)
- SS-EN-9137 - Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
- SS-EN-9138 - Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements
- SS-EN-9145 - Aerospace series - Requirements for Advanced Product Quality Planning and Production Part Approval Process
- SS-EN-9146 - Aerospace series - Foreign Object Damage (FOD) Prevention Program - Requirements for Aviation, Space, and Defence Organizations
- SS-EN-9147 - Aerospace series - Management of unsalvageable items
- SS-EN-9162 - Aerospace series - Aerospace Operator Self-Verification Programs
- SS-EN-9208 - Aerospace series - Programme management - Expression of need - Guidance on and format for (Need) Technical Specification
- SS-EN-9223-100 - Programme Management - Configuration Management - Part 100: A guide for the application of the principles of configuration management
- SS-EN-9223-101 - Programme Management - Configuration Management - Part 101: Configuration identification
- SS-EN-9223-102 - Programme Management - Configuration Management - Part 102: Configuration status accounting
- SS-EN-9223-103 - Programme Management - Configuration Management - Part 103: Configuration Verifications, Reviews and Audits
- SS-EN-9223-104 - Programme Management - Configuration Management - Part 104: Configuration Control
- SS-EN-9223-105 - Programme Management - Configuration Management - Part 105: Glossary
- SS-EN-9239 - Aerospace series - Programme Management - Guide for the risk management
- SS-EN-9278 - Aerospace series - General Principles of Obsolescence Management of chemicals, materials and processes
- SS-EN-9300-002 - Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 002: Requirements
- SS-EN-9300-003 - Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts
- SS-EN-9300-004 - Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 004: Description methods
- SS-EN-9300-005 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 005: Authentication and Verification
- SS-EN-9300-007 - Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References
- SS-EN-9300-010 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 010: Overview Data Flow
- SS-EN-9300-011 - Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 011: Reference process description "Data preparation"
- SS-EN-9300-012 - Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 012: Reference process description ''Ingest''
- SS-EN-9300-013 - Aerospace series - LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 013: Reference process description ''Archival Storage''
- SS-EN-9300-014 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 014: Reference process description ''Retrieval''
- SS-EN-9300-015 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 015: Reference process description ''Removal''
- SS-EN-9300-100 - Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 100: Common concepts for Long term archiving and retrieval of CAD 3D mechanical information
- SS-EN-9300-110 - Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 110: CAD mechanical 3D Explicit geometry information
- SS-EN-9300-115 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 115: Explicit CAD assembly structure
- SS-EN-9300-200 - Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 200: Common Concepts for LOng Term Archiving and Retrieval of Product Structure Information
- SS-EN-9320 - Aerospace series - Programme Management - General guidelines for acquisition and supply of open systems
- SS-EN-9721 - Aerospace series - General recommendation for the BIT Architecture in an integrated system
- SS-EN-ISO-20785-1 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements (ISO 20785-1:2020)
- SS-EN-ISO-20785-2 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2020)
- SS-EN-ISO-20785-3 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2015)
- SS-EN-ISO-20785-4 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 4: Validation of codes (ISO 20785-4:2019)
- SS-ISO-1151-2 - Flight dynamics - Concepts, quantities and symbols - Part 2: Motions of the aircraft and the atmosphere relative to the Earth
- SS-ISO-1151-6 - Terms and symbols f"r flight dynamics - Part 6: Aircraft geometry
- SS-ISO-20041-1 - Tritium and carbon-14 activity in gaseous effluents and gas discharges of nuclear installations Part 1: Sampling of tritium and carbon-14 (ISO 20041-1:2022, IDT)
- SS-ISO-20785-1 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements (ISO 20785-1:2012, IDT)
- SS-ISO-20785-2 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011, IDT)
- SS-ISO-20785-3 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2015, IDT)
- SS-ISO-20785-4 - Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 4: Validation of codes (ISO 20785-4:2019, IDT)
- SS-ISO-21100 - Air cargo unit load devices - Performance requirements and test parameters (ISO 21100:2014, IDT)
- SS-ISO-21384-2 - Unmanned aircraft systems Part 2: UAS components (ISO 21384-2:2022, IDT)
- SS-ISO-5129 - Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
- SS-ISO-5129-AM1 - Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight - Amendment 1 (ISO 5129:2001/Amd 1:2013, IDT)
- UNE-EN-9102 - Aerospace series - Quality systems - First article inspection requirements
- UNE-EN-9103 - Aerospace series - Quality management systems - Variation management of key characteristics