Document Center List of Standards on Materials For Aerospace Construction In General
ICS Code 49.025.01
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D2512 - Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023)
- ASTM-E1234 - Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
- ASTM-E1235 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
- ASTM-E1559 - Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
- ASTM-E1997 - Standard Practice for the Selection of Spacecraft Materials
- ASTM-E2981 - Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications
- ASTM-E2982 - Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications
- ASTM-E423 - Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
- ASTM-F1103 - Test Method for Materials Response to Flame--45 Degree (For Aerospace Vehicles) (Withdrawn 1998)
- ASTM-F2111 - Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
- ASTM-F371 - Standard Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method) (Withdrawn 2003)
BSI:
- BS-2HC-100 - Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings
- BS-2M-54 - Specification for temperature control in the heat treatment of metals
- BS-3HR-100 - Procedure for inspection and testing of wrought heat-resisting alloys
- BS-4A-4 - Test Pieces & Test Methods for Metallic Materials for Aircraft, Metric Units
- BS-4A-4-1-2 - Specification for test pieces and test methods for metallic materials. Tensile tests
- BS-4A-4-1-3 - Uninterrupted Creep & Rupture Tests, Metric Units
- BS-4HR-100 - Aerospace series. Procedure for inspection, testing and acceptance of wrought heat-resisting alloys
- BS-EN-14089 - Space product assurance. The control of limited shelf-life materials
- BS-EN-16602-70-21 - Space product assurance. Flammability testing for the screening of space materials
- BS-EN-16602-70-22 - Space product assurance. Control of limited shelf-life materials
- BS-EN-16602-70-36 - Space product assurance. Material selection for controlling stress-corrosion cracking
- BS-EN-16602-70-37 - Space product assurance. Determination of the susceptibility of metals to stress-corrosion cracking
- BS-EN-16602-70-45 - Space product assurance. Mechanical testing of metallic materials
- BS-EN-2344 - Aerospace series. Round bars, machined in heat resisting alloys. Diameter 10 mm < D < 180 mm. Dimensions
- BS-EN-2366 - Aerospace series. Sheets and strips. Heat resisting alloys. Cold rolled. Thickness a 3 mm. Dimensions
- BS-EN-2369 - Aerospace series. Wires, heat resisting alloys. Diameter 0,2 mm D 8 mm. Dimensions
- BS-EN-2600 - Aerospace series. Designation of metallic semi-finished products. Rules
- BS-EN-2950 - Aerospace series. Test method. Wrought heat resisting alloys Semifinished products and parts. Conditions for macrographic and micrographic examination. Atlas of structures and defects
- BS-EN-3077 - Aerospace series. Clamps worm drive. Technical specification
- BS-EN-3506 - Aerospace series. Hot rolled sheets and plates in heat resisting alloys. Thickness 2,0 mm a 100 mm. Dimensions
- BS-EN-3792 - Aerospace series. Anaerobic polymerisable compounds. Technical specification
- BS-EN-3987 - Aerospace series. Test methods for metallic materials. Constant amplitude force-controlled high cycle fatigue testing
- BS-EN-4262 - Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D 200 mm - 690 MPa Rm 880MPa
- BS-EN-4263 - Aerospace series. Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20). As forged. Forging stock. a or D 200 mm - 690 MPa Rm 960MPa
- BS-EN-4376 - Aerospace series. Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated. Bar and section, De 200 mm
- BS-EN-4377 - Aerospace series. Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668). Non heat treated. Forging stock. a or D 300 mm
- BS-EN-4632-001 - Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. General requirements
- BS-EN-4632-002 - Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials. Homogeneous assemblies aluminium and aluminium alloys
- BS-EN-4632-004 - Aerospace series. Weldability and brazeability of materials in aerospace constructions
- BS-EN-4632-005 - Aerospace series. Weldability and brazeability of materials in aerospace constructions
- BS-EN-4632-006 - Aerospace series. Weldability and brazeability of materials in aerospace constructions
- BS-EN-4861 - Aerospace series. Metrological assessment procedure for kinematic fields measured by digital image correlation
- BS-EN-4864 - Aerospace series. Environmental testing. High dynamic abrasion, mar, scratch and punch test in cabin interior
- BS-EN-4866 - Aerospace series. Definitions of imperfections and defects in organic matrix composite materials
- BS-EN-4867 - Aerospace series. Laser surface marking by discoloration
- BS-EN-4888 - Aerospace Series. Commercial aircraft passenger seats. Reliability testing
- BS-EN-4890 - Aerospace series. Steel X4CrNiMo16-5-1. Air melted. Hardened and tempered. Sheets and plates. 0,3 mm ? a ? 50 mm. 900 MPa ? Rm ? 1 050 MPa
- BS-EN-6018 - Aerospace series. Test methods for metallic materials. Determination of density according to displacement method
- BS-EN-6041 - Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
- BS-EN-6059-407 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
- BS-EN-6064 - Aerospace series. Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
- BS-EN-6111 - Aerospace series. Ethylene-propylene elastomer (EPM/EPDM). Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application. Material standard
- BS-EN-6139 - Aerospace series. Cap, protective, non-metallic, for EN 6123 fitting ends
- BS-EN-7010 - Aerospace series. Configuration. Definition and designation for product standards for externally threaded fasteners
- BS-EN-9147 - Aerospace series. Management of unsalvageable items
- BS-ISO-14624-1 - Space systems. Safety and compatibility of materials
- BS-ISO-14624-2-TC - Tracked Changes. Space systems - Safety and compatibility of materials
- BS-ISO-14624-3 - Space systems. Safety and compatibility of materials
- BS-ISO-14624-3-TC - Tracked Changes. Space systems. Safety and compatibility of materials
- BS-ISO-16691 - Space systems. Thermal control coatings for spacecraft. General requirements
- BS-M-54 - Specification for temperature control in the heat treatment of metals
- PD-ISO-16697 - Space systems. Safety and compatibility of materials. Method to determine the flammability thresholds of materials
ISO:
- ISO-14624-1 - Space systems - Safety and compatibility of materials - Part 1: Determination of upward flammability of materials
- ISO-14624-2 - Space systems - Safety and compatibility of materials - Part 2: Determination of flammability of electrical-wire insulation and accessory materials
- ISO-14624-3 - Space systems - Safety and compatibility of materials - Part 3: Determination of off-gassed compounds from materials and assembled articles
- ISO-14624-4 - Space systems - Safety and compatibility of materials - Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
- ISO-14624-5 - Space systems - Safety and compatibility of materials - Part 5: Determination of reactivity of system/component materials with aerospace propellants
- ISO-14624-6 - Space systems - Safety and compatibility of materials - Part 6: Determination of reactivity of processing materials with aerospace fluids
- ISO-14624-7 - Space systems - Safety and compatibility of materials - Part 7: Determination of permeability and penetration of materials to aerospace fluids
- ISO-16691 - Space systems - Thermal control coatings for spacecraft - General requirements
- ISO-16697 - Space systems - Safety and compatibility of materials - Method to determine the flammability thresholds of materials
Other SDOs:
- EN-16602-70-21 - Space product assurance - Flammability testing for the screening of space materials
- EN-16602-70-22 - Space product assurance - Control of limited shelf-life materials
- EN-16602-70-36 - Space product assurance - Material selection for controlling stress-corrosion cracking
- EN-16602-70-37 - Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
- EN-16602-70-45 - Space product assurance - Mechanical testing of metallic materials
- EN-2950 - Aerospace Series, Test Method, Wrought Heat Resisting Alloys Semifinished Products & P
- EN-3987 - Aerospace Series - Test Methods for Metallic Materials - Constant Amplitude Force-Cont
- EN-4262 - Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D = 200 mm - 690 MPa = Rm = 880MPa
- EN-4263 - Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D = 200 mm - 690 MPa = Rm = 960MPa
- EN-4376 - Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De = 200 mm
- EN-4377 - Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D = 300 mm
- EN-4630-004 - Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
- EN-4632-001 - Part 001: General Requirements, Aerospace Series - Welded & Brazed Assemblies for Aer
- EN-4632-002 - Aerospace Series, Welded & Brazed Assemblies for Aerospace Constructions, Weldability
- EN-4632-004 - Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
- EN-4632-005 - Part 005: Homogeneous Assemblies of Heat Resisting NI or Co Base Alloys
- EN-4632-006 - Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys
- EN-4867 - Aerospace series - Laser surface marking by discoloration
- EN-6018 - Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
- EN-6041 - Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
- EN-6064 - Aerospace series. Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
- SS-EN-14089 - Space product assurance - The control of limited shelf-life materials
- SS-EN-14090 - Space product assurance - Flammability testing for the screening of space materials
- SS-EN-14091 - Space product assurance - Thermal vacuum outgassing test for the screening of space materials
- SS-EN-16602-70-02 - Space product assurance - Thermal vacuum outgassing test for the screening of space materials
- SS-EN-16602-70-21 - Space product assurance - Flammability testing for the screening of space materials
- SS-EN-16602-70-22 - Space product assurance - Control of limited shelf-life materials
- SS-EN-16602-70-36 - Space product assurance - Material selection for controlling stress-corrosion cracking
- SS-EN-16602-70-37 - Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
- SS-EN-16602-70-39 - Space product assurance - Welding of metallic materials for flight hardware
- SS-EN-16602-70-45 - Space product assurance - Mechanical testing of metallic materials
- SS-EN-16602-70-50 - Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms
- SS-EN-16602-70-55 - Space product assurance - Microbiological examination of flight hardware and cleanrooms
- SS-EN-16602-70-58 - Space product assurance - Bioburden control of cleanrooms
- SS-EN-2004-1 - Aerospace series - Test methods for aluminium andaluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys
- SS-EN-2004-5 - Aerospace series - Test methods for aluminium andaluminium alloy products - Part 5: Determination of cladding thickness and copper diffusion of cladsemi-finished products
- SS-EN-2032-2 - Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition
- SS-EN-2040 - Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16
- SS-EN-2053 - Aerospace series - U-section aluminium alloy folded profiles - Dimensions
- SS-EN-2070-1 - Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 1: General requirements
- SS-EN-2070-1-AM1 - Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 1: General requirements
- SS-EN-2070-2 - Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 2: Sheet, strip formed profiles and plate
- SS-EN-2070-3 - Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 3: Bar and section
- SS-EN-2070-4 - Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 4: Tube for structures
- SS-EN-2070-5 - Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 5: Tube used under pressure
- SS-EN-2070-6 - Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 6: Rivet wire
- SS-EN-2070-7 - Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 7: Wrought forging stock
- SS-EN-2072 - Aerospace series - Aluminium alloy AL-P1050A - H14 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
- SS-EN-2076-1 - Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 1: General requirements
- SS-EN-2076-1-AM1 - Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 1: General requirements
- SS-EN-2076-2 - Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 2: Ingots and remelting
- SS-EN-2076-3 - Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 3: Preproduction and production castings
- SS-EN-2078 - Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval
- SS-EN-2082-1 - Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 1: General requirements
- SS-EN-2082-1-AM1 - Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 1: General requirements
- SS-EN-2082-2 - Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 2: Forging stock
- SS-EN-2082-3 - Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 3: Preproduction and production forgings
- SS-EN-2089 - Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
- SS-EN-2092 - Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
- SS-EN-2093 - Aerospace series - Aluminium alloy AL-P7009-T74 -Hand forgings 20 mm <= a <= 150 mm
- SS-EN-2094 - Aerospace series - Aluminium alloy AL-P7009-T74 -Die forgings 3 mm <= a <= 150 mm
- SS-EN-2100 - Aerospace series - Aluminium alloy Al-P2014A-T4511 - Extruded bars and sections a or D <= 200 mm
- SS-EN-2101 - Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys
- SS-EN-2103-1 - Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 1: General requirements
- SS-EN-2103-2 - Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 2: Remelting stock
- SS-EN-2103-3 - Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings
- SS-EN-2104 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD
- SS-EN-2126 - Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm < a <= 80 mm
- SS-EN-2127 - Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D <= 100 mm
- SS-EN-2128 - Aerospace series - Aluminium alloy AL-P7075-T7351- Drawn bars 6 mm <= a or D <= 75 mm
- SS-EN-2155-13 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 13: Determination of temperature at deflection under load
- SS-EN-2155-14 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 14: Determination of the 1/10 Vicat softening temperature
- SS-EN-2155-2 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 2: Determination of water absorption
- SS-EN-2155-21 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 21: Determination of resistance to crack propagation (K factor)
- SS-EN-2155-3 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 3: Determination of refractive index
- SS-EN-2155-5 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 5: Determination of visible light transmission
- SS-EN-2155-8 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 8: Determination of optical distortion
- SS-EN-2155-9 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 9: Determination of haze
- SS-EN-2157-1 - Aerospace series - Steel - Forging stock and forgings - Technical specifications - Part 1: General requiremnts
- SS-EN-2157-2 - Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 2: Forging stock
- SS-EN-2157-3 - Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings
- SS-EN-2241 - Aerospace series - Lamp caps - Dimensions
- SS-EN-2243-2 - Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
- SS-EN-2243-3 - Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core
- SS-EN-2243-5 - Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
- SS-EN-2259 - Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD
- SS-EN-2260 - Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD
- SS-EN-2261 - Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD
- SS-EN-2262 - Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD
- SS-EN-2302 - Aerospace series - Heat-resisting nickel base alloy NiCr20Co3Fe3 - Rm ≥ 650 MPa - Sheets and strips, cold rolled - 0,25 mm < a ≤ 3 mm
- SS-EN-2306 - Aerospace series - Heat resisting - Nickel base alloy Ni-Cr20Co3Fe3 - Annealed - Bars
- SS-EN-2310 - Aerospace series - Test methods for the flame resistance rating of non-metallic materials
- SS-EN-2318 - Aerospace series - Aluminium alloy AL-P2024-T3511- Extruded bars and sections 1,2 mm <= a or D <= 150 mm
- SS-EN-2326 - Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D <= 200 mm
- SS-EN-2329 - Aerospace series - Textile glass fibre preimpregnates - Test method for the determination of mass per unit area
- SS-EN-2330 - Aerospace series - Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter
- SS-EN-2331 - Aerospace series - Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area
- SS-EN-2332 - Aerospace series - Textile glass fibre preimpregnates - Test method for the determination of the resin flow
- SS-EN-2366 - Aerospace series - Sheets and strips - Heat resisting alloys - Cold rolled - Thickness a = 3 mm - Dimensions
- SS-EN-2369 - Aerospace series - Wires, heat resisting alloys - Diameter 0,2 mm = D = 8 mm - Dimensions
- SS-EN-2374 - Aerospace series - Glass fibre reinforced mouldings and sandwich composites - Production of test panels
- SS-EN-2378 - Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion
- SS-EN-2381 - Aerospace series - Aluminium alloy AL-P7009-T7452- Hand forgings 40 mm <= a <= 150 mm
- SS-EN-2384 - Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D <= 150 mm
- SS-EN-2385 - Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D <= 125 mm
- SS-EN-2395 - Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
- SS-EN-2428 - Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD
- SS-EN-2429 - Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD
- SS-EN-2430 - Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD
- SS-EN-2431 - Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD
- SS-EN-2432 - Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD
- SS-EN-2489 - Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids
- SS-EN-2545-1 - Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 1: General requirements
- SS-EN-2545-2 - Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 2: Remelting stock
- SS-EN-2545-3 - Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 3: Preproduction and production castings
- SS-EN-2561 - Aerospace series - Carbon fibre reinforced plastics - Unidirection laminates - Tensile test parallel to the fibre direction
- SS-EN-2600 - Aerospace series - Designation of metallic semi-finished products - Rules
- SS-EN-2630 - Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D <= 125 mm with peripheral coarse grain control
- SS-EN-2632 - Aerospace series - Aluminium alloy Al-P7075 - T73511 - Extruded bar and section - a or D less than or equal to 150 mm with peripheral coarse grain control
- SS-EN-2633 - Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control
- SS-EN-2636 - Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D <= 200 mm with peripheral coarse grain control
- SS-EN-2667-2 - Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear
- SS-EN-2693 - Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm less than or equal to a less than or equal to 6 mm
- SS-EN-2694 - Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
- SS-EN-2695 - Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm less than or equal to a less than or equal to 6 mm
- SS-EN-2696 - Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6mm
- SS-EN-2744 - Aerospace serie S - Non-metallic materials - Preferred test temperatures
- SS-EN-2831 - Aerospace series - Hydrogen embrittlement of steels - Test by slow bending
- SS-EN-2832 - Aerospace series - Hydrogen embrittlement of steels - Notched specimen test
- SS-EN-2858-1 - Aerospace series - Titanium and titanium alloys -Forging stock and forgings - Technical specification - Part 1: General requirements
- SS-EN-2858-2 - Aerospace series - Titanium and titanium alloys -Forging stock and forgings - Technical specification - Part 2: Forging stock
- SS-EN-2858-3 - Aerospace series - Titanium and titanium alloys -Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings
- SS-EN-2950 - Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrogaphic and micrographic examination - Atlas of structures and defects
- SS-EN-3026 - Aerospace series - Test method for dry film lubricants - Corrosion test on steels specimens
- SS-EN-3027 - Aerospece series - Test method for dry film lubricants - Salt spray test
- SS-EN-3030 - Aerospace series - Test method for dry film lubricants - Solids content
- SS-EN-3032 - Aerospace series - Test method for dry film lubricants - Thickness measurement
- SS-EN-3382 - Aerospace series - Rings retaining, internal, axial mounting, steel, phosphated
- SS-EN-3660-035 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 035: Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed - Product standard
- SS-EN-3792 - Aerospace series - Anaerobic polymerisable compounds - Technical specification
- SS-EN-3987 - Aerospace series - Test methods for metallic materials - Constant amplitude force-controlled high cycle fatigue testing
- SS-EN-4258 - Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use
- SS-EN-4262 - Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 880 MPa
- SS-EN-4263 - Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - As forged - Forging stock - a or D ≤ 200 mm - 690 MPa ≤ Rm ≤ 960MPa
- SS-EN-4376 - Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) solution treated and precipitation treated - Bar and section, De ≤ 200 mm
- SS-EN-4377 - Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D ≤ 300 mm
- SS-EN-4488 - Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm
- SS-EN-4526 - Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip
- SS-EN-4570 - Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Forgings - De ≤ 100 mm
- SS-EN-4632-001 - Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements
- SS-EN-4632-002 - Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys
- SS-EN-4632-004 - Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
- SS-EN-4632-005 - Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys
- SS-EN-4632-006 - Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys
- SS-EN-4729 - Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys
- SS-EN-4804 - Aerospace series - Flange couplings - Swivel flange with 4 fastening holes, in nickel alloy - Inch series
- SS-EN-4805 - Aerospace series - Flange couplings - Weld coupling, straight, in heat resisting steel - Inch series
- SS-EN-4808 - Aerospace series - Flange couplings - Weld coupling, 90° elbow, in nickel alloy - Inch series
- SS-EN-4840-101 - Aerospace series - Heat shrinkable moulded shapes - Part 101: Polyolefin, semi-rigid, limited fire hazard - Temperature range - 30 °C to 105 °C - Product standard
- SS-EN-4852 - Aerospace series - External spiral drive heads for threaded fasteners - Geometrical definition and fastener head wrenching configuration
- SS-EN-4861 - Aerospace series - Metrological assessment procedure for kinematic fields measured by digital image correlation
- SS-EN-4864 - Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior
- SS-EN-4866 - Aerospace series - Definitions of imperfections and defects in organic matrix composite materials
- SS-EN-4867 - Aerospace series - Laser surface marking by discoloration
- SS-EN-4868 - Aerospace series - Anodic electrodeposition of hexavalent chromium free primer
- SS-EN-6018 - Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
- SS-EN-6041 - Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
- SS-EN-6046 - Aerospace series - Bearing, spherical, plain, in corrosion resisting steel - Narrow series - Dimensions and loads - Inch series
- SS-EN-6064 - Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)
- SS-ISO-8591-1 - Aerospace - Wrought aluminium and aluminium alloys - Inspection, Testing and supply requirements - Part 1: General requirements