Document Center

Document Center List of Standards on Aluminium

ICS Code 49.025.20

Return to ICS Index.

Up to Level 2:

• 49.025 (Materials for aerospace construction)

The following documents are a part of this series:

ASTM:

• ASTM-B594 - Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

BSI:

• BS-2L-169 - Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0.6)
• BS-2L-83 - Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
• BS-2L-85 - Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
• BS-2L-87 - Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
• BS-2L-93 - Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
• BS-2L-97 - Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
• BS-2L-98 - Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)
• BS-3L-100 - Procedure for inspection and testing of wrought aluminium and aluminium alloys
• BS-3L-51 - Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
• BS-3L-58 - Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
• BS-3L-78 - Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
• BS-3L-80 - Specification for sheet and strip of aluminium-2$9D% magnesium alloy (temper designation-O)
• BS-3L-81 - Specification for sheet and strip of aluminium-2$9D% magnesium alloy (temper designation H16 or H26)
• BS-3L-86 - Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
• BS-4L-100 - Procedure for Inspection, Testing and Acceptance of Wroughtaluminium and Aluminium Al
• BS-4L-44 - Specification for forging stock, bars, extruded sections and forgings of aluminium-2% magnesium alloy
• BS-4L-60 - Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22)
• BS-4L-61 - Specification for sheet and strip of aluminium-manganese alloy (temper designation-O)
• BS-5L-100 - Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
• BS-5L-101 - Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
• BS-5L-34 - Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
• BS-5L-44 - Specification for forging stock, bars, extruded sections and forgings of aluminium-2-+% magnesium alloy
• BS-EN-2004-7 - Aerospace series. Test methods for aluminium and aluminium alloy products. Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
• BS-EN-2044 - Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm D 63 mm. Dimensions
• BS-EN-2045 - Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm a 50 mm. Dimensions
• BS-EN-2046 - Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm a 50 mm. Dimensions
• BS-EN-2047 - Aerospace series. Beaded L-section extruded, in aluminium and aluminium alloys. Dimensions
• BS-EN-2048 - Aerospace series. Extruded L-section in aluminium alloys. Dimensions
• BS-EN-2049 - Aerospace series. Extruded channel section, in aluminium alloys. Dimensions
• BS-EN-2050 - Aerospace series. Extruded T-section, in aluminium alloys. Dimensions
• BS-EN-2053 - Aerospace series. U-section aluminium alloy folded profiles. Dimensions
• BS-EN-2066 - Aerospace series. Extruded section in aluminium alloys. General tolerances
• BS-EN-2071 - Aerospace series. Sheets in aluminium and aluminium alloys. Thickness 0,25 mm a 6 mm. Dimensions
• BS-EN-2072 - Aerospace series. Aluminium AL-P1050A. H14. Sheet and strip. 0,4 mm a 6 mm
• BS-EN-2085 - Aerospace series. Aluminium alloy AL-P2618A-T6. Hand and die forgings. a 150 mm
• BS-EN-2086 - Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a 150 mm
• BS-EN-2087 - Aerospace series. Aluminium alloy AL-P2014A. T6 or T62. Clad sheet and strip 0,4 mm a 6 mm
• BS-EN-2088 - Aerospace series. Aluminium alloy AL-P2014A. T4 or T42. Clad sheet and strip. 0,4 mm a 6 mm
• BS-EN-2089 - Aluminium alloy AL-P2014A T6 or T62. Sheet and strip. 0,4 mm a 6 mm
• BS-EN-2090 - Aerospace series. Aluminium alloy AL-P2024-T3. Clad sheet and strip 0,3 mm a 6 mm
• BS-EN-2092 - Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip. 0,4 mm a 6 mm
• BS-EN-2114 - Aerospace series. Aluminium 1050A-H14. Wire for solid rivets. D 10 mm
• BS-EN-2115 - Aerospace series. Aluminium alloy 2117-T42. Wire for solid rivets. D 10 mm
• BS-EN-2116 - Aerospace series. Aluminium alloy 2017A-T42. Wire for solid rivets. D 10 mm
• BS-EN-2117 - Aerospace series. Aluminium alloy AL-P5056A (5056A)-H32. Wire for solid rivets. D 10 mm
• BS-EN-2125 - Aerospace series. Aluminium alloy Al-P16-T6151. Plates. 6 mm < a < 120 mm
• BS-EN-2131 - Aerospace series. Plates in aluminium alloys. Thickness 6 mm < a 160 mm. Dimensions
• BS-EN-2134 - Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm D 220 mm. Dimensions
• BS-EN-2256 - Aerospace series. Aluminium alloy AL-P2618A-T852. Hand and die forgings. a 150 mm
• BS-EN-2319 - Aerospace series. Aluminium alloy 2024 T3510. Drawn bar. a < 75 mm
• BS-EN-2320 - Aerospace series. Aluminium alloy 2024-T4. Drawn bar. a 75 mm
• BS-EN-2321 - Aerospace series. Aluminium alloy 2024-T3. Bars and sections. a 150 m
• BS-EN-2341 - Aerospace series. Aluminium and aluminium alloy. Square and rectangular extruded bars. Dimensions
• BS-EN-2381 - Aluminium alloy AL-P7009-T7452. Hand forgings 40 mm ≤ a ≤ 150 mm
• BS-EN-2387 - Aerospace series. Aluminium alloy 2014A T6. Tubes for structures. 0,6 mm < a < 12,5 mm
• BS-EN-2390 - Aerospace series. Aluminium alloy 6082-T6. Tubes for structures 0,6 mm a 12,5 mm
• BS-EN-2395 - Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip. 0,4 mm a 6 mm
• BS-EN-2422 - Aluminium alloy AL-P2124-T351. Plate. 25 mm < a 120 mm
• BS-EN-2486 - Aerospace series. Aluminium alloy AL-P2618A. Forging stock
• BS-EN-2510 - Aerospace series. Aluminium alloy 2024-. T42. Drawn tubes for structural applications
• BS-EN-2511 - Aluminium alloy AL-P7075-T7351. Plate. 6 mm < a 100 mm
• BS-EN-2512 - Aerospace series. Aluminium alloy AL-P7175. T7351. Plate. 6mm < a 100 mm
• BS-EN-2599 - Aerospace series. Strips in aluminium and aluminium alloys. Thickness 0,25 mm a 3.2 mm. Dimensions
• BS-EN-2632 - Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D 150 mm with peripheral coarse grain control
• BS-EN-2633 - Aerospace series. Aluminium alloy AL-P2024. AlCu4Mg1. T3511. Extruded bars and sections. 1,2 mm De 160 mm with peripheral coarse grain control
• BS-EN-2633-TC - Tracked Changes. Aerospace series. Aluminium alloy AL-P2024. AlCu4Mg1. T3511. Extruded bars and sections. 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control
• BS-EN-2635 - Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D 200 mm with peripheral coarse grain control
• BS-EN-2638 - Aerospace series. Aluminium alloy 2024-. T3. Extruded bar and section. 1,2 mm (a or D) 150 mm with coarse peripheral grain control
• BS-EN-2681 - Aerospace series. Aluminium alloy AL-P7010-T74. Hand and die forgings. a 150 mm
• BS-EN-2684 - Aerospace series. Aluminium alloy AL-P7010-T7651. Plate. 6 mm < a 140 mm
• BS-EN-2687 - Aerospace series. Aluminium alloy AL-P7010-T7451. Plate. 6 mm < a 160 mm
• BS-EN-2693 - Aerospace series. Aluminium alloy AL-P5086-H111. Sheet and strip. 0,3 mm a 6 mm
• BS-EN-2694 - Aerospace series. Aluminium alloy AL-P6061-T6 or T62. Sheet and strip. 0,4 mm a 6 mm
• BS-EN-2695 - Aerospace series. Aluminium alloy AL-P6081-T6. Sheet and strip. 0,3 mm a 6 mm
• BS-EN-2696 - Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Sheet and strip. 0,4 mm a 6 mm
• BS-EN-2699 - Aerospace series. Aluminium alloy (5086). Annealed and straightened (H111). Drawn bar. 6 mm D 50 mm
• BS-EN-2702 - Aerospace series. Aluminium alloy. AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D 200 mm
• BS-EN-2703 - Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm a 6 mm
• BS-EN-2704 - Aerospace series. Aluminium alloy AL-P2024. AlCu4Mg1. T3511. Drawn bars. De 75 mm
• BS-EN-2709 - Aerospace series. Aluminium alloy 2024-. T3510. Bars and sections. 1,2 mm (a or D) 150 mm. With peripheral coarse grain control
• BS-EN-2715 - Aerospace series. Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings
• BS-EN-2716 - Aerospace series. Test method. Determination of susceptibility to intergranular corrosion. Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys
• BS-EN-2726 - Aerospace series. Aluminium alloy Al-C42201. T6. Sand castings. a 20 mm
• BS-EN-2728 - Aerospace series. Aluminium alloy AL-C42101. T6. Sand casting. a 20 mm
• BS-EN-2802 - Aluminium alloy AL-P7475-T761. Sheet and strip. 0,6 mm a 6 mm
• BS-EN-2803 - Aerospace series. Aluminium alloy AL-P7475-T761. Clad sheet and strip. 1,0 mm a 6 mm
• BS-EN-3115 - Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D 10 mm
• BS-EN-3332 - Aerospace series. Aluminium alloy AL-P7475-T762. Clad sheet and strip. 1,0 mm a 6 mm
• BS-EN-3333 - Aluminium alloy AL-P7475-T762. Sheet and strip. 0,6 mm a 6 mm
• BS-EN-3335 - Aluminium alloy AL-P7475-O2. Sheet for superplastic forming (SPF). 0,8 mm a 6 mm
• BS-EN-3338 - Aerospace series. Aluminim alloy AL-P7050. T74511. Extruded bar and section. a or D 150 mm with peripheral coarse grain control
• BS-EN-3339 - Aerospace series. Aluminium alloy AL-P7010-T76. Die Forgings. a 200 mm
• BS-EN-3341 - Aluminium alloy AL-P6061-T4 or T42. Sheet and strip. 0,4 mm a 6 mm
• BS-EN-3342 - Aerospace series. Aluminim alloy AL-P6061. T4 or T42. Drawn or extruded bar and section. a or D 150 mm
• BS-EN-3344 - Aerospace series. Aluminim alloy AL-P7050. T76511. Extruded bar and section. a or D 150 mm with peripheral coarse grain control
• BS-EN-3347 - Aerospace series. Aluminim alloy AL-P2024. T8511. Extruded bar and section. a or D 150 mm with peripheral coarse grain control
• BS-EN-3474 - Aerospace series. Aluminium alloy AL-P2024-T81. Sheet and strip. 0,25 mm a 6 mm
• BS-EN-3552 - Aerospace series. Aluminium alloy AL-P2618A-T6 or T62. Clad sheet and strip. 0,4 mm a 6 mm
• BS-EN-3553 - Aerospace series. Aluminium alloy AL-P2618A-T6511. Extruded bar and section. a or D 160 mm
• BS-EN-3872 - Aerospace series. Aluminium alloy AL-R39002-H112. Die forgings. a 200mm
• BS-EN-3979 - Aerospace series. Aluminium alloy AL-P8090-O2. Sheet for superplastic forming (SPF). 0,8 mm a 6 mm
• BS-EN-3982 - Aerospace series. Aluminium alloy AL-P7050. AlZn6CuMgZr. T7451. Plates. 6 mm < a 160 mm
• BS-EN-3983 - Aerospace series. Aluminium alloy AL-P7050-. T7651. Plate. 6 mm < a 160 mm
• BS-EN-3997 - Aerospace series. Aluminium alloy AL-P2024-Al Cu4Mg1-T3. Sheet and strip. 0,4 mm a 6 mm
• BS-EN-3998 - Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Sheet and strip. 0,3 mm a 6 mm
• BS-EN-3999 - Aerospace series. Aluminium alloy AL-P2024-T351. Sheet and strip with improved chemical milling capability 1,6 mm a 6 mm
• BS-EN-4001 - Aerospace series. Aluminium alloy AL-P2024-T351. Clad sheet and strip with improved chemical milling capability 1,6 mm a 6 mm
• BS-EN-4002 - Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm a 6 mm
• BS-EN-4003 - Aerospace series. Aluminium alloy AL-P2219-T87. Sheet and strip 0,5 mm a 6 mm
• BS-EN-4004 - Aerospace series. Aluminium alloy AL-P3103-H16. Sheet and strip. 0,4 mm a 6 mm
• BS-EN-4005 - Aerospace series. Aluminium alloy AL-P5052-O. Sheet and strip 0,3 mm a 6 mm
• BS-EN-4006 - Aerospace series. Aluminium alloy AL-P6082-T4 or T42. Sheet and strip 0,4 mm a 6 mm
• BS-EN-4007 - Aerospace series. Aluminium alloy AL-P6082-T6 or T62. Sheet and strip. 0,4 mm 3L a 3L 6 mm
• BS-EN-4099 - Aerospace series. Aluminium alloy AL-P2219-T6 or T62. Clad sheet and strip. 0,5 mm a 6 mm
• BS-EN-4100 - Aerospace series. Aluminium alloy AL-P2219-T6 or T62. Sheet and strip. 0,5 mm a 6 mm
• BS-EN-4101 - Aerospace series. Aluminium alloy AL-P2024-T4. Sheet and strip with improved stretch forming capability. 0,4 mm a 6 mm
• BS-EN-4102 - Aerospace series. Aluminium alloy AL-P2219-T81. Clad sheet and strip. 0,5 mm a 6 mm
• BS-EN-4202 - Aerospace series. Aluminium alloy AL-P6082-T651. Plate. 6 mm < a 25 mm
• BS-EN-4203 - Aerospace series. Aluminium alloy AL-P8090-T89. Sheet. 0,6 mm a 6 mm
• BS-EN-4204 - Aerospace series. Aluminium alloy AL-P8090. T841. Sheet. 0,6 mm a 6 mm
• BS-EN-4209 - Aerospace series. Aluminium alloy AL-P2219-T851. Plate. 6 mm
• BS-EN-4211 - Aerospace series. Aluminium alloy AL-P2024-T42. Clad plate. 6mm < a 25mm
• BS-EN-4212 - Aerospace series. Aluminium alloy AL-P5086-H111. Plate. 6mm < a 8 0mm
• BS-EN-4213 - Aerospace series. Aluminium alloy AL-P6061-T651. Plate. 6mm
• BS-EN-4214 - Aerospace series. Aluminium alloy AL-P7010-T651. Plate. 6 mm
• BS-EN-4215 - Aerospace series. Aluminium alloy AL-P7175-T651. Plate. 6 mm
• BS-EN-4247 - Aerospace series. Aluminium alloy AL-P2024-T42. Plate. 6 mm
• BS-EN-4283 - Aerospace series. Aluminium alloy AL-P2219-T87. Plate. 6 mm < a 40 mm
• BS-EN-4286 - Aerospace series. Aluminium alloy AL-P8090-T89. Die forgings. a 125 mm
• BS-EN-4287 - Aerospace series. Aluminium alloy AL-P7010. Forging stock
• BS-EN-4291 - Aerospace series. Aluminium alloy AL-P8090. Forging stock
• BS-EN-4292 - Aerospace series. Aluminium alloy AL-R39002. Forging stock
• BS-EN-4293 - Aerospace series. Aluminium alloy AL-P7175. T73511. Extruded bar and section. a or D 150 mm
• BS-EN-4313 - Aerospace series. Aluminium aloy AL-P6013-T6. Sheet and strip. 0,5 mm a 6 mm
• BS-EN-4324 - Aerospace series. Aluminium alloy AL-W42201. Filler metal for welding. Rod
• BS-EN-4341 - Aerospace series. Aluminium alloy AL-W46431. Filler metal for welding. Wire and rod
• BS-EN-4400-1 - Aerospace series. Aluminium and aluminium- and magnesium- alloys. Technical specification
• BS-EN-4400-2 - Aerospace series. Aluminium and aluminium- and magnesium- alloys. Technical specification
• BS-EN-4400-3 - Aerospace series. Aluminium and aluminium- and magnesium- alloys. Technical specification
• BS-EN-4449 - Aluminium alloy AL-P7050. T76. Sheet. 0,8 mm a 6 mm
• BS-EN-4450 - Aerospace series. Aluminium alloy AL-P7050-T762. Sheet. 0,8 mm a 6 mm
• BS-EN-4707 - Aerospace series. Acid pickling of aluminium and aluminium alloys without hexavalent chromium
• BS-EN-4725 - Aerospace series. Aluminium alloy AL-P2024- Al Cu4Mg1. T351. Plate. 6 mm < a 150 mm
• BS-EN-4827 - Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys
• BS-EN-4900 - Aerospace series. Aluminium alloy 5086. H111. Extruded bars. 10 mm D 300 mm
• BS-EN-6025 - Aerospace series. Plates. Aluminium alloy 2024. Close tolerances flatness. Thickness. 6 mm a 55 mm. Dimensions
• BS-L-103 - Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-man
• BS-L-158 - Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
• BS-L-159 - Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
• BS-L-161 - Specification. Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
• BS-L-162 - Specification. Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
• BS-L-163 - Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
• BS-L-164 - Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
• BS-L-165 - Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
• BS-L-166 - Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
• BS-L-167 - Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
• BS-L-169 - Specification for Ingots and Castings of ALUMINIUM-Silicon-Magnesium Alloy (Solution T
• BS-L-170 - Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)

ISO:

• ISO-8591-1 - Aerospace - Wrought aluminium and aluminium alloys - Inspection, testing and supply requirements - Part 1: General requirements

Other SDOs:

• EN-2004-7 - Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
• EN-2053 - Aerospace series - U-section aluminium alloy folded profiles - Dimensions
• EN-2114 - Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D 10 mm
• EN-2116 - Aerospace Series - Aluminium Alloy 2017A-T42 - Wire for Solid Rivets - D <= 10 mm, Aer
• EN-2117 - Aerospace Series - Aluminium Alloy al-P5056a (5056a)- H32 - Wire for Solid Rivets - D
• EN-2319 - Aerospace series - Aluminium alloy 2024 - T3510 - Drawn bar - a - 75 mm
• EN-2320 - Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a 75 mm
• EN-2321 - Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a 150 mm
• EN-2387 - Aerospace series - Aluminium alloy 2014A - T6 - Tubes for structures - 0,6 mm - a - 12,5 mm
• EN-2395 - Aerospace Series, Aluminium Alloy al-P2014A-T4 or T42, Sheet & Strip, 0,4 mm
• EN-2422 - Aluminium Alloy al-P2124-T351, Plate, 25 Mm
• EN-2510 - Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structural applications
• EN-2511 - Aluminium Alloy al-P7075-T7351, Plate, 6 Mm
• EN-2512 - Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a = 100 mm
• EN-2633 - Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm = De = 160 mm with peripheral coarse grain control
• EN-2638 - Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm (a or D) 150 mm with coarse peripheral grain control
• EN-2693 - Aerospace Series, Aluminium Alloy- al-P5086-H111, Sheet & Strip, 0,3 mm
• EN-2694 - Aerospace Series, Aluminium Alloy al-P6061-T6 or T62, Sheet & Strip, 0,4 mm < a < 6 M
• EN-2695 - Aerospace Series, Aluminium Alloy al-P6081-T6, Sheet & Strip, 0,3 mm
• EN-2696 - Aerospace Series, Aluminium Alloy al-P7075-T6 or T62, Sheet & Strop, 0,4 mm
• EN-2704 - Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De = 75 mm
• EN-2716 - Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX-series, AL-P7XXX-series and aluminium-lithium alloys
• EN-2726 - Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a 20 mm
• EN-2728 - Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a 20 mm
• EN-2803 - Aerospace Series, Aluminium Alloy al-P7475-T761, Clad Sheet & Strip, 1,0 Mm
• EN-2813 - Aerospace series - Aluminium alloy AL-P-6061-T6 - Drawn tube for pressure applications - 0,6 mm a 12,5 mm
• EN-3115 - Aerospace Series - Aluminium Alloy 7050-T73 - Wire for Solid Rivets - D <= 10 Mm
• EN-3335 - Aluminium Alloy al-P7475-O2, Sheet for Superplastic Forming (Spf), 0,8 mm < a < 6 Mm
• EN-3339 - Aerospace Series - Aluminium Alloy al-P7010-T76 - Die Forgings - a < = 200 Mm
• EN-3872 - Aerospace Series, Aluminium Alloy al-R39002-H112, Die Forgings, A
• EN-3979 - Aerospace Series, Aluminium Alloy al-P8090-O2, Sheet for Superplastic Forming (Spf), 0
• EN-3982 - Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates - 6 mm < a = 160 mm
• EN-3983 - Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a = 160 mm
• EN-3997 - Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm = a = 6 mm
• EN-3998 - Aerospace Series, Aluminium Alloy al-P2024-T4 or T42, Sheet & Strip 0,3 mm < a < 6 Mm
• EN-3999 - Aerospace Series - Aluminium Alloy al-P2024-T351 - Sheet & Strip With Improved Chemica
• EN-4001 - Aerospace Series, Aluminium Alloy al-P2024-T351, Clad Sheet & Strip With Improved Che
• EN-4002 - Aerospace Series - Aluminium Alloy al-P2219-T81 - Sheet & Strip 0,5 mm <= a <= 6 Mm
• EN-4003 - Aerospace Series - Aluminium Alloy al-P2219-T87 - Sheet & Strip 0,5 mm <= a <= 6 Mm
• EN-4004 - Aerospace Series, Aluminium Alloy al-P3103-H16, Sheet & Strip, 0,4 mm < a < 6 Mm
• EN-4005 - Aerospace Series, Aluminium Alloy al-P5052-O, Sheet & Strip 0,3 mm < a < 6 Mm
• EN-4006 - Aerospace Series, Aluminium Alloy al-P6082-T4 or T42, Sheet & Strip 0,4 mm < a < 6 Mm
• EN-4101 - Aluminium Alloy al-P2024-T4, Sheet & Strip With Improved Stretch Forming Capability, 0
• EN-4102 - Aerospace Series, Aluminium Alloy al-P2219-T81, Clad Sheet & Strip, 0,5 Mm
• EN-4202 - Aerospace Series, Aluminium Alloy al-P6082-T651, Plate, 6 Mm
• EN-4214 - Aerospace Series, Aluminium Alloy al-P7010-T651, Plate, 6 Mm
• EN-4215 - Aerospace Series, Aluminium Alloy al-P7175-T651, Plate, 6 Mm
• EN-4247 - Aerospace Series, Aluminium Alloy al-P2024-T42, Plate, 6 Mm
• EN-4286 - Aerospace Series, Aluminium Alloy al-P8090-T89, Die Forgingg, A
• EN-4289 - Aerospace series - Aluminium alloy AL-P7175 - Forging stock
• EN-4291 - Aerospace Series, Aluminium Alloy al-P8090, Forging Stock
• EN-4292 - Aerospace Series, Aluminium Alloy al-R39002, Forging Stock
• EN-4293 - Aerospace series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ? 150 mm
• EN-4313 - Aerospace Series, Aluminium Alloy al-P6013-T6, Sheet & Strip, 0,5 Mm
• EN-4400-2 - Aerospace series - Aluminium and aluminium- and magnesium-alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
• EN-4400-3 - Aerospace series - Aluminium and aluminium- and magnesium-alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
• EN-4450 - Aerospace Series, Aluminium Alloy al-P7050-T762, Sheet, 0,8 Mm
• EN-4707 - Aerospace series - Acid pickling of aluminum and aluminum alloy without hexavalent chromium
• EN-4725 - Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a = 150 mm
• EN-4827 - Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys
• SS-EN-2004-7 - Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
• SS-EN-2044 - Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm less than or equal to D less than or equal to 63 mm - Dimensions
• SS-EN-2045 - Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm less than or equal to a less than or equal to 50 mm - Dimensions
• SS-EN-2046 - Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm less than or equal to a less than or equal to 50 mm - Dimensions
• SS-EN-2047 - Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions
• SS-EN-2048 - Aerospace series - Extruded L-section, in aluminium alloys - Dimensions
• SS-EN-2049 - Aerospace series - Extruded channel section, in aluminium alloys - Dimensions
• SS-EN-2050 - Aerospace series - Extruded T-section, in aluminium alloys - Dimensions
• SS-EN-2053 - Aerospace series - U-section aluminium alloy folded profiles - Dimensions
• SS-EN-2066 - Aerospace series - Extruded section in aluminium alloys - General tolerances
• SS-EN-2071 - Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0,25 mm less than or equal to a less than or equal to 6 mm - Dimensions
• SS-EN-2072 - Aerospace series - Aluminium alloy AL-P1050A - H14 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2085 - Aerospace series - Aluminium alloy AL-P2618A - T6 - Hand and die forgings - a less than or equal to 150 mm
• SS-EN-2086 - Aerospace series - Aluminium alloy AL - P2618A - T851 - Hand and die forgings - a less than or equal 150 mm
• SS-EN-2087 - Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2088 - Aerospace series - Aluminium alloy AL-P2014A - T4 or T 42 - Clad sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2089 - Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2090 - Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip - 0,3 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2092 - Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2114 - Aerospace series - Aluminium 1050A-H14 - Wire for solid rivets - D = 10 mm
• SS-EN-2115 - Aerospace series - Aluminium alloy 2117-T42 - Wire for solid rivets - D ≤ 10 mm
• SS-EN-2116 - Aerospace series - Aluminium alloy 2017A-T42 - Wire for solid rivets - D ≤ 10 mm
• SS-EN-2117 - Aerospace series - Aluminium alloy AL-P5056A (5056A)-H32 - Wire for solid rivets - D ≤ 10 mm
• SS-EN-2125 - Aerospace series - Aluminium alloy Al-P16- - T6151 - Plates - 6 mm < a = 120 mm
• SS-EN-2131 - Aerospace series - Plates in aluminium alloys - Thickness 6 mm less than a less or equal than 160 mm - Dimensions
• SS-EN-2134 - Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm less than or equal to D less than or equal to 220 mm - Dimensions
• SS-EN-2256 - Aerospace series - Aluminium alloy AL-P2618A - T852 - Hand and die forgings - a less than or equal to 150 mm
• SS-EN-2319 - Aerospace series - Aluminium alloy 2024- - T3510 - Drawn bar - a ≤ 75 mm
• SS-EN-2320 - Aerospace series - Aluminium alloy 2024-T4 - Drawn bar - a = 75 mm
• SS-EN-2321 - Aerospace series - Aluminium alloy 2024-T3 - Bars and sections - a = 150 mm
• SS-EN-2341 - Aerospace series - Aluminium and aluminium alloy - Square and rectangular extruded bars - Dimensions
• SS-EN-2387 - Aerospace series - Aluminium alloy 2014A - T6 - Tubes for structures - 0,6 mm ≤ a ≤ 12,5 mm
• SS-EN-2390 - Aerospace series - Aluminium alloy 6082-T6 - Tubes for structures 0,6 mm = a = 12,5 mm
• SS-EN-2395 - Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2422 - Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm
• SS-EN-2486 - Aerospace series - Aluminium alloy AL-P2618A - Forging stock
• SS-EN-2510 - Aerospace series - Aluminium alloy 2024- - T42 - Drawn tubes for structural applications
• SS-EN-2511 - Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm
• SS-EN-2512 - Aerospace series - Aluminium alloy AL-P7175 - T7351 - Plate - 6mm < a ≤ 100 mm
• SS-EN-2599 - Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm < a < 3,2 mm - Dimensions
• SS-EN-2632 - Aerospace series - Aluminium alloy Al-P7075 - T73511 - Extruded bar and section - a or D less than or equal to 150 mm with peripheral coarse grain control
• SS-EN-2633 - Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm ≤ De ≤ 160 mm with peripheral coarse grain control
• SS-EN-2635 - Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D less than or equal to 200 mm with peripheral coarse grain control
• SS-EN-2638 - Aerospace series - Aluminium alloy 2024-T3 - Extruded bar and section - 1,2 mm = (a or D) = 150 mm with coarse peripheral grain control
• SS-EN-2681 - Aerospace series - Aluminium alloy AL-P7010 - T74 - Hand and die forgings - a less than or equal to 150 mm
• SS-EN-2684 - Aerospace series - Aluminium alloy AL-P7010 - T7651 - Plate - 6 mm < a less than or equal to 140 mm
• SS-EN-2687 - Aerospace series - Aluminium alloy AL-P7010 - T7451 - Plate 6 mm < a less than or equal to 160 mm
• SS-EN-2693 - Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2694 - Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2695 - Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2696 - Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6mm
• SS-EN-2699 - Aerospace series - Aluminium alloy (5086) - Annealed and straightened (H111) - Drawn bar - 6 mm = D = 50 mm
• SS-EN-2702 - Aerospace series - Aluminium alloy AL-P6061- T6 or T62 - Drawn or extruded bar and section - a or D less than or equal to 200 mm
• SS-EN-2703 - Aerospace series - Aluminium alloy AL-P2024 - T4 or T42 - Clad sheet and strip - 0,3 mm - less than or equal to a less than or equal to 6 mm
• SS-EN-2704 - Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Drawn bars - De ≤ 75 mm
• SS-EN-2709 - Aerospace series - Aluminium alloy 2024- - T3510 - Bars and sections - 1,2 mm = (a or D) = 150 mm - With peripheral coarse grain control
• SS-EN-2715 - Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings
• SS-EN-2716 - Aerospace series - Test method - Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys
• SS-EN-2726 - Aerospace series - Aluminium alloy Al-C42201 - T6 - Sand castings - a = 20 mm
• SS-EN-2728 - Aerospace series - Aluminium alloy AL-C42101 - T6 - Sand casting - a = 20 mm
• SS-EN-2802 - Aerospace series - Aluminium alloy AL-P7475 - T761 - Sheet and strip - 0,6 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2803 - Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm less than or equal to a less than or equal to 6 mm
• SS-EN-2813 - Aerospace series - Aluminium alloy AL-P-6061- - T6 - Drawn tube for pressure applications - 0,6 mm = a = 12,5 mm
• SS-EN-3115 - Aerospace series - Aluminium alloy 7050-T73 - Wire for solid rivets - D less than or equal to 10 mm
• SS-EN-3332 - Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm less than or equal to a less than or equal to 6 mm
• SS-EN-3333 - Aerospace series - Aluminium alloy AL-7475-T762 - Sheet and strip - 0,6 mm less than or equal to a less than or equal to 6 mm
• SS-EN-3335 - Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm less than or equal to a less than or equal to 6 mm
• SS-EN-3338 - Aerospace series - Aluminium alloy AL-P7050 - T4511 - Extruded bar and section - a or D less than or equal to 150 mm with peripheral coarse grain control
• SS-EN-3339 - Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a ≤ 200 mm
• SS-EN-3341 - Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-3342 - Aerospace series - Aluminium alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D less than or equal to 150 mm
• SS-EN-3344 - Aerospace series - Aluminium alloy AL-P7050 - T76511 - Extruded bar and section - a or D less than or equal to 150 mm with peripheral coarse grain control
• SS-EN-3347 - Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D less than or equal to 150 mm with peripherl coarse grain control
• SS-EN-3474 - Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm less than or equal to a less than or equal to 6 mm
• SS-EN-3552 - Aerospace series - Aluminium alloy AL-P2618A - T6 or T62 - Clad sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-3553 - Aerospace series - Aluminium alloy AL-P2618A - T6511 - Extruded bar and section - a or D less than or equal to 160 mm
• SS-EN-3557 - Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications - 0,6 mm = a = 3 mm
• SS-EN-3872 - Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a less than or equal to 200 mm
• SS-EN-3979 - Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm less than or equal to a less than or equal to 6 mm
• SS-EN-3982 - Aerospace series - Aluminium alloy AL-P7050 - AlZn6CuMgZr - T7451 - Plates - 6 mm < a ≤ 160 mm
• SS-EN-3983 - Aerospace series - Aluminium alloy AL-P7050- - T7651 - Plate - 6 mm < a ≤ 160 mm
• SS-EN-3997 - Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T3 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm
• SS-EN-4007 - Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4099 - Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4100 - Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4101 - Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4102 - Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4202 - Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm < a less than or equal to 25 mm
• SS-EN-4203 - Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4204 - Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4209 - Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm less than to a less than or equal to 50 mm
• SS-EN-4211 - Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm less than to a less than or equal to 25 mm
• SS-EN-4212 - Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm less than to a less than or equal to 80 mm
• SS-EN-4213 - Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm less than to a less than or equal to 80 mm
• SS-EN-4214 - Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm less than to a less than or equal to 20 mm
• SS-EN-4215 - Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm less than to a less than or equal to 80 mm
• SS-EN-4247 - Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm less than to a less than or equal to 140 mm
• SS-EN-4283 - Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm less than to a less than or equal to 40 mm
• SS-EN-4286 - Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a less than or equal to 125 mm
• SS-EN-4287 - Aerospace series - Aluminium alloy AL-P7010 - Forging stock
• SS-EN-4289 - Aerospace series - Aluminium alloy AL-P7175- Forging stock
• SS-EN-4291 - Aerospace series - Aluminium alloy AL-P8090 - Forging stock
• SS-EN-4292 - Aerospace series - Aluminium alloy AL-R39002 - Forging stock
• SS-EN-4293 - Aerospce series - Aluminium alloy AL-P7175 - T73511 - Extruded bar and section - a or D ≤ 150 mm
• SS-EN-4313 - Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4324 - Aerospace series - Aluminum alloy AL-W42201 - Filler metal for welding - Rod
• SS-EN-4341 - Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod
• SS-EN-4400-2 - Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 2: Aluminium and aluminium alloy sheet and strip
• SS-EN-4400-3 - Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section
• SS-EN-4400-6 - Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 6: Aluminium alloy forging stock
• SS-EN-4449 - Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm less than or equal to a less than or equal to 6 mm
• SS-EN-4450 - Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm less than or equal to a less than or equal 6 mm
• SS-EN-4707 - Aerospace series - Acid pickling of aluminium and aluminium alloys without hexavalent chromium
• SS-EN-4725 - Aerospace series - Aluminium alloy AL-P2024- Al Cu4Mg1 - T351 - Plate - 6 mm < a ≤ 150 mm
• SS-EN-4827 - Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys
• SS-EN-4900 - Aerospace series - Aluminium alloy 5086 - H111 - Extruded bars - 10 mm ≤ D ≤ 300 mm
• SS-EN-6025 - Aerospace series - Plates - Aluminium alloy 2024 - Close tolerances flatness - Thickness - 6 mm = a = 55 mm - Dimensions