Document Center List of Standards on Titanium
ICS Code 49.025.30
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-2TA-100 - Inspection & Testing of Wrought Titanium & Titanium Alloys, Procedure For
- BS-2TA-13 - Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
- BS-2TA-21 - Specification for Sheet & Strip of Titanium-Copper Alloy (Tensile Strength 540-700 Mpa
- BS-2TA-22 - Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm
- BS-2TA-23 - Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm
- BS-2TA-24 - Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm
- BS-2TA-28 - Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) (primarily intended for the manufacture of fasteners complying with the requirements of the 'A' series of British Standards)
- BS-2TA-3 - Specification for bar and section for machining of commercially pure titanium (tensile strength 390-540 N/mm2)
- BS-2TA-38 - Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
- BS-2TA-39 - Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
- BS-2TA-4 - Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mm
- BS-2TA-40 - Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
- BS-2TA-41 - Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
- BS-2TA-42 - Specification for forgings of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
- BS-2TA-45 - Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm)
- BS-2TA-46 - Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)
- BS-2TA-47 - Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section 100 mm)
- BS-2TA-48 - Specification for forgings of titanium-aluminium-molybdenum- tin-silicon-carbon alloy (tensile strength 1050-1200 MPa) (limiting ruling section 100 mm)
- BS-2TA-49 - Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)
- BS-2TA-5 - Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mm
- BS-2TA-50 - Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm)
- BS-2TA-51 - Specification for forgings of titanium-aluminium- molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm)
- BS-2TA-52 - Specification for sheet and strip of titanium- copper alloy (tensile strength 690-920 MPa)
- BS-2TA-56 - Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
- BS-2TA-57 - Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)
- BS-2TA-58 - Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
- BS-2TA-59 - Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)
- BS-2TA-6 - Specification for Sheet and Strip of Commercially Pure Titanium (Tensile Strength 570-
- BS-2TA-8 - Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm
- BS-2TA-9 - Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm
- BS-3TA-1 - Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)
- BS-3TA-10 - Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
- BS-3TA-100 - Procedure for inspection, testing and acceptance of wrought titanium and titanium alloys
- BS-3TA-11 - Specification for bar and section for machining of titanium-aluminium-vanadium alloy (Tensile strength 9001 160 MPa) (Limiting ruling section 150 mm)
- BS-3TA-12 - Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
- BS-3TA-13 - Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm)
- BS-3TA-2 - Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 MPa)
- BS-3TA-21 - Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)
- BS-3TA-28 - Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm)
- BS-3TA-6 - Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 MPa)
- BS-3TA-7 - Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 MPa)
- BS-EN-2003-009 - Aerospace series. Test methods. Titanium and titanium alloys
- BS-EN-2003-010 - Aerospace series. Titanium and titanium alloys. Test methods
- BS-EN-2338 - Aerospace series. Sheets, hot rolled in titanium and titanium alloys. Thickness 0,8 mm a 6 mm. Dimensions
- BS-EN-2339 - Aerospace series. Sheets, cold rolled in titanium and titanium alloys. Thickness 0,2 mm a 6 mm. Dimensions
- BS-EN-2617 - Aerospace Series. Plates in titanium and titanium alloys. Thickness 6 mm < a 100 mm. Dimensions
- BS-EN-2858-2 - Titanium and titanium alloys. Forging stock and forgings. Technical specification. Forging stock
- BS-EN-2954-001 - Aerospace series. Macrostructure of titanium and titanium alloy wrought products
- BS-EN-2954-002 - Aerospace series. Macrostructure of titanium and titanium alloy wrought products
- BS-EN-2955 - Aerospace series. Recycling of titanium and titanium alloy scrap
- BS-EN-3114-001 - Aerospace series. Test method. Microstructure of ( + ) titanium alloy wrought products
- BS-EN-3114-002 - Aerospace series. Test method. Microstructure of ( + ) titanium alloy wrought products
- BS-EN-3114-003 - Aerospace series. Test method. Microstructure of ( + ) titanium alloy wrought products
- BS-EN-3114-004 - Aerospace series. Test method. Microstructure of ( + ) titanium alloy wrought products
- BS-EN-3120 - Aerospace series. Titanium alloy TI-P64003. Cold worked and stress relieved. Seamless tube for pressure systems. 4 mm D 51 mm. 690 MPa Rm 1 030 MPa
- BS-EN-3310 - Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Not heat treated. Forging stock, for annealed forgings. De 360 mm
- BS-EN-3311 - Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar for machining. D < 110 mm
- BS-EN-3312 - Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De 150 mm
- BS-EN-3314 - Aerospace series. Titanium alloy TI-P64001. Solution treated and aged. Bar for machining. D 75 mm
- BS-EN-3315 - Aerospace series. Titanium alloy TI-P64001. Solution treated and aged. Forgings. De 75 mm
- BS-EN-3351 - Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De 150 mm
- BS-EN-3354 - Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a 6 mm
- BS-EN-3355 - Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Extruded section. De 150 mm. 900 MPa Rm 1 160 MPa
- BS-EN-3378 - Aerospace series. Titanium TI-P99002. Annealed. Wires for rivets. 1,6 mm D 10 mm
- BS-EN-3451 - Aerospace series. Titanium TI-P99002. Not heat treated. Grade 2 forging stock, for annealed forgings - a or D 300 mm
- BS-EN-3456 - Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Sheet and strip, hot rolled. a 6 mm
- BS-EN-3459 - Aerospace series. Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn). Solution treated and aged. Plate. 6 mm < a 50 mm
- BS-EN-3460 - Aerospace series. Titanium TI-P99002. Annealed. Bar for machining. a or D 150 mm. Rm 390 MPa
- BS-EN-3464 - Aerospace series. Titanium alloy (Ti-6Al-4V). Annealed. Plate. 6 mm < a 100 mm
- BS-EN-3683 - Aerospace series. Test methods. Titanium alloy wrought products. Determination of primary content. Point count method and line intercept method
- BS-EN-3684 - Aerospace series. Test methods. Titanium alloy wrought products. Determination of transus temperature. Metallographic method
- BS-EN-3688 - Aerospace series. T-ring fillers in titanium alloy for welded pipes. 14000 kPa nominal pressure
- BS-EN-3813 - Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De 50 mm
- BS-EN-3892 - Aerospace series. Titanium alloy TI-W64001. Filler metal for welding
- BS-EN-3893 - Aerospace series. Titanium alloy TI-W19001. Filler metal for welding
- BS-EN-3965 - Aerospace series. Titanium alloy TI-B17001. Filler metal for brazing. Rolled foil
- BS-EN-3976 - Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content
- BS-EN-4058 - Aerospace series. Filler rods and filler wires for welding in titanium and titanium alloys. Diameter 0,5 mm D 5,0 mm. Dimensions
- BS-EN-4104 - Aerospace series. Nickel base alloy NI-B40002. Filler metal for brazing. Powder or paste.
- BS-EN-4267 - Aerospace series. Round bar in titanium and titanium alloys. Diameter 6 mm D 160 mm. Dimensions
- BS-EN-4342 - Aerospace series. Titanium TI-W99001. Filler metal for welding. Wire and rod
- BS-EN-4675 - Aerospace series. Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe). Rm 1 300 MPa. Bars. De < 110 mm
- BS-TA-38 - Specification for Bar for Machining of Titanium-ALUMINIUM-Molybdenum-Tin-Silicon-Carbo
- BS-TA-43 - Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm
- BS-TA-44 - Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm
- BS-TA-48 - Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1200 N/mm
- BS-TA-51 - Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm
- BS-TA-53 - Specification for bar and section for machining of titanium-copper alloy (tensile strength 650-880 N/mm
- BS-TA-54 - Specification for forging stock of titanium-copper alloy (tensile strength 650-880 N/mm
- BS-TA-55 - Specification for forgings of titanium-copper alloy (tensile strength 650-880 N/mm
Other SDOs:
- EN-2003-009 - Aerospace Series, Test Methods, Titanium & Titanium Alloys, Determination of Surface
- EN-2003-010 - Aerospace Series, Titanium Titanium Alloys, Test Methods, Sampling for Determination
- EN-2338 - Aerospace Series - Sheets, Hot Rolled in Titanium & Titaniumalloys - Thickness O,8 Mm
- EN-2954-001 - Part 001: General Requirements, Aerospace Series - Macrostructure of Titanium & Titani
- EN-2954-002 - Part 002: Macrostructure of Bar, Section, Forgingstock & Forgings, Aerospace Series -
- EN-2955 - Aerospace Series, Recycling of Titanium & Titanium Alloy Scrap
- EN-3114-001 - Part 001: General Requirements, Aerospace Series - Test Method - Microstructure of (a
- EN-3114-002 - Aerospace Series, Test Method, Microstructure of (a + B) Titanium Alloy Wrought Produc
- EN-3114-003 - Part 003: Microstructure of Plate, Aerospace Series - Test Method - Microstructure Of
- EN-3114-004 - Part 004: Microstructure of Sheet for Superplastic Forming, Aerospace Series - Test M
- EN-3120 - Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm = D = 51 mm - 690 MPa = Rm = 1 030 MPa
- EN-3310 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De = 360 mm
- EN-3311 - Aerospace Series, Titanium Alloy Ti-P64001 (Ti-6ai-4V), Annealed, Bar for Machining, D
- EN-3312 - Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De = 150 mm
- EN-3314 - Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D
75 mm - EN-3315 - Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De
360 mm - EN-3351 - Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De = 150 mm
- EN-3354 - Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Sheet for superplastic forming - a = 6 mm
- EN-3355 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De = 150 mm - 900 MPa = Rm = 1 160 MPa
- EN-3378 - Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm
D 10 mm - EN-3451 - Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D = 300 mm
- EN-3456 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled GÇö a = 6 mm
- EN-3459 - Aerospace Series - Titanium Alloy Ti-P63001 (Ti-4ai-4mo-2Sn) - Solution Treated & Aged
- EN-3460 - Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D
150 mm - R<(Index)m> - EN-3464 - Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm < a = 100 mm
- EN-3683 - Aerospace Series, Test Methods, Titanium Alloy Wrought Products, Determination of Prim
- EN-3684 - Aerospace Series, Test Methods, Titanium Alloy Wrought Products, Determination of B Tr
- EN-3813 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De = 50 mm
- EN-3893 - Aerospace Series, Titanium Alloy Ti-W19001, Fillter Metal for Welding
- EN-3976 - Aerospace Series - Titanium & Titanium Alloys - Test Method - Cehmical Analysis for T
- EN-4500-004 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys
- EN-4675 - Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm = 1 300 MPa - Bars - De < 110 mm
- EN-4685 - Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm = 1 240 MPa
- EN-4800-001 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip
- EN-4800-002 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
- EN-4800-003 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube
- EN-4800-004 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire
- EN-4800-005 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
- EN-4800-006 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings
- EN-4800-007 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock
- EN-4800-008 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings
- SS-EN-2003-009 - Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination
- SS-EN-2003-010 - Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content
- SS-EN-2338 - Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm equal to or less than a equal to or less than 6 mm - Dimensions
- SS-EN-2339 - Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm equal to or less than a equal to or less than 6 mm - Dimensions
- SS-EN-2617 - Aerospace series - Plates in titanium and titanium alloys - Thickness 6 mm less than a less than or equal to 100 mm - Dimensions
- SS-EN-2954-001 - Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 001: General requirements
- SS-EN-2954-002 - Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings
- SS-EN-3114-002 - Aerospace series - Test method - Microstructure of (a + B) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings
- SS-EN-3114-003 - Aerospace series - Test method - Microstructure of (a + B) titanium alloy wrought products - Part 003: Microstructure of plate
- SS-EN-3114-004 - Aerospace series - Test method - Microstructure of (a + B) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming
- SS-EN-3120 - Aerospace series - Titanium alloy TI-P64003 - Cold worked and stress relieved - Seamless tube for pressure systems - 4 mm ≤ D ≤ 51 mm - 690 MPa ≤ Rm ≤ 1 030 MPa
- SS-EN-3310 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Not heat treated - Forging stock, for annealed forgings - De ≤ 360 mm
- SS-EN-3311 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D < 110 mm
- SS-EN-3312 - Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Forgings De ≤ 150 mm
- SS-EN-3314 - Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Bar for machining - D = 75 mm
- SS-EN-3315 - Aerospace series - Titanium alloy TI-P64001 - Solution treated and aged - Forgings - De = 75 mm
- SS-EN-3351 - Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De ≤ 150 mm
- SS-EN-3354 - Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Sheet for superplastic forming - a ≤ 6 mm
- SS-EN-3355 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Extruded section - De ≤ 150 mm - 900 MPa ≤ Rm ≤ 1 160 MPa
- SS-EN-3378 - Aerospace series - Titanium TI-P99002 - Annealed - Wires for rivets - 1,6 mm = D = 10 mm
- SS-EN-3451 - Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm
- SS-EN-3456 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled a = 6 mm
- SS-EN-3459 - Aerospace series - Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn) - Solution treated and aged - Plate - 6 mm < a ≤ 50 mm
- SS-EN-3460 - Aerospace series - Titanium TI-P99002 - Annealed - Bar for machining - a or D = 150 mm - Rm = 390 MPa
- SS-EN-3464 - Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Plate - 6 mm < a ≤ 100 mm
- SS-EN-3683 - Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method
- SS-EN-3684 - Aerospace series - Test methods - Titanium alloy wrought products - Determination of B transus temperature - Metallographic method
- SS-EN-3813 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De ≤ 50 mm
- SS-EN-3892 - Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding
- SS-EN-3893 - Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding
- SS-EN-3965 - Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil
- SS-EN-3976 - Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content
- SS-EN-4058 - Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm less than or equal to D less than or equal to 5,0 mm - Dimensions
- SS-EN-4267 - Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm equal to or less than D equal to or less than 160 mm - Dimensions
- SS-EN-4342 - Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod
- SS-EN-4500-004 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys
- SS-EN-4675 - Aerospace series - Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe) - Rm ≥ 1 300 MPa - Bars - De < 110 mm
- SS-EN-4685 - Aerospace series - Titanium Ti10V2Fe3Al - Bars - D < 110 mm - Rm ≥ 1 240 MPa
- SS-EN-4800-001 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip
- SS-EN-4800-002 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
- SS-EN-4800-003 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube
- SS-EN-4800-004 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire
- SS-EN-4800-005 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock
- SS-EN-4800-006 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings
- SS-EN-4800-007 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock
- SS-EN-4800-008 - Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings