Document Center List of Standards on Rubber And Plastics
ICS Code 49.025.40
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-C1511 - Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
- ASTM-C1559 - Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
- ASTM-C274 - Standard Terminology of Structural Sandwich Constructions (Withdrawn 2016)
- ASTM-D3039 - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- ASTM-D3518 - Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
- ASTM-D7194 - Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
- ASTM-D8101 - Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
- ASTM-E2533 - Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications
- ASTM-E2661 - Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
- ASTM-E377 - Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
- ASTM-E471 - Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
- ASTM-E512 - Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
- ASTM-F1128 - Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method (Withdrawn 1996)
- ASTM-F521 - Standard Test Methods for Bond Integrity of Transparent Laminates
- ASTM-F734 - Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
- ASTM-F828 - Test Method for Radiant Heat Resistance of Aircraft Inflatable Evacuation Slide/Slide Raft Materials (Withdrawn 1995)
BSI:
- BS-2F-70 - Specification for heavy duty braided rubber cord
- BS-2F-71 - Specification for light duty braided rubber cord
- BS-2PL-1 - Specification for phenolic mouldings for aeronautical purposes
- BS-3F-68 - Specification for Controlled Storage of Vulcanized Rubbers for Use in Aerospace Applic
- BS-3F-69 - Specification for packaging and identification of vulcanized rubber items
- BS-3F-70 - Specification for heavy duty braided rubber cord
- BS-3F-71 - Specification for light duty braided rubber cord
- BS-3J-10 - Specification for pressure-sensitive adhesive waterproof PVC tape
- BS-4F-68 - Controlled storage of vulcanized rubbers for use in aerospace applications
- BS-4J-10 - Specification for pressure-sensitive adhesive water resistant PVC tape
- BS-7531 - Rubber bonded fibre jointing for industrial and aerospace purposes. Specification
- BS-EN-2378 - Fibre reinforced plastics. Determination of water absorption by immersion
- BS-EN-2559-TC - Tracked Changes. Aerospace series. Carbon, glass and aramid fibre preimpregnates. Determination of the resin and fibre content and the mass of fibre per unit area
- BS-EN-2562 - Carbon fibre reinforced plastics. Unidirectional laminates. Flexural test parallel to the fibre direction
- BS-EN-2564 - Aerospace series. Carbon fibre laminates. Determination of the fibre, resin and void contents
- BS-EN-2565 - Aerospace series. Preparation of carbon fibre reinforced resin panels for test purposes
- BS-EN-2566 - Aerospace series. Fluorocarbon rubber (FKM). Hardness 70 IRHD
- BS-EN-2567 - Aerospace series. Fluorocarbon rubber (FKM). Hardness 80 IRHD
- BS-EN-2568 - Aerospace series. Fluorocarbon rubber (FKM). Hardness 90 IRHD
- BS-EN-2743 - Aerospace series. Fibre reinforced plastics. Standard procedures for conditioning prior to testing unaged materials
- BS-EN-2795 - Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 50 IRHD
- BS-EN-2796 - Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 60 IRHD
- BS-EN-2798 - Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 80 IRHD
- BS-EN-2799 - Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 90 IRHD
- BS-EN-2823 - Aerospace series. Fibre reinforced plastics. Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics
- BS-EN-2833-005 - Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification
- BS-EN-2835 - Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 40 IRHD
- BS-EN-2836 - Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 50 IRHD
- BS-EN-2837 - Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 60 IRHD
- BS-EN-2838 - Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 70 IRHD
- BS-EN-2839 - Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 80 IRHD
- BS-EN-2840 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD
- BS-EN-2841 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 60 IRHD
- BS-EN-2842 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 70 IRHD
- BS-EN-2843 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 80 IRHD
- BS-EN-2844 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 90 IRHD
- BS-EN-2845 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 50 IRHD
- BS-EN-2846 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 60 IRHD
- BS-EN-2847 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 70 IRHD
- BS-EN-2848 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 80 IRHD
- BS-EN-2849 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 90 IRHD
- BS-EN-2850 - Aerospace series. Carbon fibre thermosetting resin - Unidirectional laminates. Compression test parallel to fibre direction
- BS-EN-2894 - Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS2 lubricated. Classification: 1 550 MPa (at ambient temperature) / 315 C
- BS-EN-2899 - Aerospace series. Vulcanized rubbers. Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
- BS-EN-3656 - Aerospace series. Polycarbonate, self-extinguishing, low smoke emission. Characteristics
- BS-EN-3697 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 60 IRHD
- BS-EN-3698 - Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD
- BS-EN-3746 - Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD
- BS-EN-3747 - Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification
- BS-EN-3783 - Aerospace series. Fibre composite materials. Normalisation of fibre dominated mechanical properties
- BS-EN-3825 - Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 60 IRHD
- BS-EN-3826 - Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 70 IRHD
- BS-EN-3827 - Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 80 IRHD
- BS-EN-4115 - Aerospace series. Cushion, rubber for clamps. Dimensions, masses
- BS-EN-4717 - Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55). Stock shape material. Material specification
- BS-EN-4718 - Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55). Stock shape material. Material specification
- BS-EN-6031 - Aerospace series. Fibre reinforced plastics. Test method. Determination of in-plane shear properties ( 45 tensile test)
- BS-EN-6032 - Aerospace series. Fibre reinforced plastics. Test method. Determination of the glass transition temperatures
- BS-EN-6033 - Aerospace series. Carbon fibre reinforced plastics. Test method. Determination of interlaminar fracture toughness energy. Mode I. GIC
- BS-EN-6034 - Aerospace series. Carbon fibre reinforced plastics. Test method. Determination of interlaminar fracture toughness energy. Mode II. GIIC
- BS-EN-6035 - Aerospace series. Fibre reinforced plastics. Test method. Determination of notched and unnotched tensile strength
- BS-EN-6036 - Aerospace series. Fibre reinforced plastics. Test method. Determination of notched, unnotched and filled hole compression strength
- BS-EN-6038 - Aerospace series. Fibre reinforced plastics. Test method. Determination of the compression strength after impact
- BS-EN-6059-407 - Aerospace series. Electrical cables, installation. Protection sleeves. Test methods
- BS-F-125 - Specification for rubber bonded compressed asbestos fibre jointing
- BS-F-139 - Specification for aluminized polychloroprene rubber-coated nylon fabric (350 g/m2) for aerospace purposes
- BS-F-143 - Specification for para-aramid braided cords for aerospace purposes
- BS-F-152 - Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification
- BS-F-153 - Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification
- BS-F-154 - Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification
- BS-F-156 - Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification
- BS-F-157 - Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification
- BS-PL-8 - Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Specification
- BS-PL-9 - Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods
Other SDOs:
- EN-2562 - Carbon Fibre Reinforced Plastics, Unidirectional Laminates, Flexural Test Parallel To
- EN-2564 - Carbon Fibre Laminates - Determination of the Fibre, Resin & Voice Contents
- EN-2565 - Aerospace series - Preparation of carbon fibre reinforced resin panels for test purposes
- EN-2566 - Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD
- EN-2567 - Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD
- EN-2568 - Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD
- EN-2795 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD
- EN-2796 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD
- EN-2798 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD
- EN-2799 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD
- EN-2823 - Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics
- EN-2833-005 - Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate
- EN-2835 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD
- EN-2836 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD
- EN-2837 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD
- EN-2838 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
- EN-2839 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD
- EN-2840 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD
- EN-2841 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD
- EN-2842 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD
- EN-2843 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD
- EN-2844 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD
- EN-2845 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD
- EN-2846 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD
- EN-2847 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD
- EN-2848 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD
- EN-2849 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD
- EN-2850 - Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction
- EN-2899 - Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
- EN-3697 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD
- EN-3698 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD
- EN-3746 - Aerospace Series - O-Rings, in Fluorosilicon Rubber (Fvmq) - Hardness 80 Irhd
- EN-3747 - Aerospace Series - O-Rings, in Fluorosilicon Rubber (Fvmq) - Technical Specification
- EN-3783 - Aerospace series - Fibre composite materials - Normalization of fibre dominated mechanical properties
- EN-3825 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD
- EN-3826 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD
- EN-3827 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
- EN-4115 - Aerospace Series - Cushion, Rubber for Clamps - Dimensions, Masses
- EN-6031 - Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (-¦ 45 Degrees tensile test)
- EN-6032 - Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures
- EN-6033 - Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC
- EN-6034 - Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
- EN-6035 - Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength
- EN-6036 - Aerospace series - Fibre reinforced plastics - Test method - Determination of notched, unnotched and filled hole compression strength
- EN-6037 - Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength
- EN-6038 - Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact
- SS-EN-2155-12 - Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion
- SS-EN-2557 - Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area
- SS-EN-2559 - Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
- SS-EN-2562 - Aerospace series - Carbon fibre reinforced plastics - Unidirectionallaminates - Flexural test parallel to the fibre direction
- SS-EN-2563 - Aerospace series - Carbon fibre reinforced plastics - Undirectional laminates - Determination of the apparent interlaminar shear strength
- SS-EN-2564 - Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents
- SS-EN-2565 - Aerospace series - Preparation of carbon fibre reinforced resin panels for test purposes
- SS-EN-2566 - Aerospace series - Fluorocarbon rubber (FKM) - Hardness 70 IRHD
- SS-EN-2567 - Aerospace series - Fluorocarbon rubber (FKM) - Hardness 80 IRHD
- SS-EN-2568 - Aerospace series - Fluorocarbon rubber (FKM) - Hardness 90 IRHD
- SS-EN-2597 - Aerospace series - Carbon fibre reinforced plastics - Undirectional laminates - Tensile test perpendicular to the fibre direction
- SS-EN-2743 - Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
- SS-EN-2746 - Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
- SS-EN-2747 - Aerospace series - Glass fibre reinforced plastics - Tensile test
- SS-EN-2795 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD
- SS-EN-2796 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD
- SS-EN-2798 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD
- SS-EN-2799 - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD
- SS-EN-2823 - Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics
- SS-EN-2833-005 - Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate
- SS-EN-2835 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 40 IRHD
- SS-EN-2836 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 50 IRHD
- SS-EN-2837 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 60 IRHD
- SS-EN-2838 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 70 IRHD
- SS-EN-2839 - Aerospace series - Chloroprene rubber (CR) - Heat resistance - Hardness 80 IRHD
- SS-EN-2840 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD
- SS-EN-2841 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 60 IRHD
- SS-EN-2842 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 70 IRHD
- SS-EN-2843 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD
- SS-EN-2844 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 90 IRHD
- SS-EN-2845 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 50 IRHD
- SS-EN-2846 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 60 IRHD
- SS-EN-2847 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 70 IRHD
- SS-EN-2848 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 80 IRHD
- SS-EN-2849 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant - Hardness 90 IRHD
- SS-EN-2850 - Aerospace series - Carbon fibre thermosetting resin - Unidirectional laminates - Compression test parallel to fibre direction
- SS-EN-2899 - Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers
- SS-EN-3207 - Aerospace series - Rubber compounds - Technical specification
- SS-EN-3656 - Aerospace series - Polycarbonate, self-extinguishing, low smoke emission - Characteristics
- SS-EN-3697 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD
- SS-EN-3698 - Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD
- SS-EN-3741 - Aerospace series - Nuts, clip, metric - Installation holes and assembly
- SS-EN-3746 - Aerospace series - Orings, in fluoroslilicone rubber (FVMQ) - Hardness 80 IRHD
- SS-EN-3747 - Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification
- SS-EN-3783 - Aerospace series - Fibre composite materials - Normalisation of fibre dominated mechanical properties
- SS-EN-3825 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD
- SS-EN-3826 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD
- SS-EN-3827 - Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
- SS-EN-4115 - Aerospace series - Cushion, rubber for clamps - Dimensions, masses
- SS-EN-4708-107 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 107: Polytetrafluoroethylene (PTFE) - Operating temperatures - 65 °C to 260 °C - Product standard
- SS-EN-6031 - Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test)
- SS-EN-6032 - Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures
- SS-EN-6033 - Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC
- SS-EN-6034 - Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
- SS-EN-6035 - Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength
- SS-EN-6036 - Aerospace series - Fibre reinforced plastics - Test method - Determination of notched, unnotched and filled hole compression strength
- SS-EN-6037 - Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength
- SS-EN-6038 - Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact
- SS-EN-6111 - Aerospace series - Ethylene-propylene elastomer (EPM/EPDM) - Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application - Material standard