Document Center List of Standards on Other Materials
ICS Code 49.025.99
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
- ASTM-D2532 - Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
- ASTM-D3115 - Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear (Withdrawn 2019)
- ASTM-D3947 - Standard Test Method for Specific Heat of Aircraft Turbine Lubricants by Thermal Analysis (Withdrawn 1999)
- ASTM-D5901 - Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) (Withdrawn 2010)
- ASTM-D5972 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
- ASTM-D6790 - Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
- ASTM-E1560 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
- ASTM-E1731 - Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
- ASTM-E1731M - Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves [Metric] (Withdrawn 2000)
- ASTM-E285 - Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
- ASTM-F1110 - Standard Test Method for Sandwich Corrosion Test
- ASTM-F1111 - Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
- ASTM-F359 - Standard Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (N 2) (Withdrawn 2003)
BSI:
- BS-2B-100 - Procedure for inspection, testing and acceptance of wrought copper alloys
- BS-2B-23 - Specification for copper-aluminium-nickel-iron alloy rods, bars, sections, forging stock and forgings
- BS-2B-24 - Specification for copper-tin-phosphorous alloy rods and sections
- BS-2B-27 - Copper-Zinc-ALUMINIUM-Nickel-Silicon Alloy Tube
- BS-2F-66 - Specification for rubber bonded cork sheets
- BS-2HR-10 - Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
- BS-2HR-2 - Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
- BS-2HR-203 - Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4)
- BS-2HR-204 - Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
- BS-2HR-205 - Specification for nickel-copper alloy sheet and strip: annealed (nickel base, Cu 31)
- BS-2HR-206 - Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
- BS-2HR-207 - Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
- BS-2HR-208 - Specification for nickel-chromium-iron alloy plate, sheet and strip: annealed (nickel base, Cr 15.5, Fe 8)
- BS-2HR-3 - Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2)
- BS-2HR-4 - Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
- BS-2HR-40 - Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)
- BS-2HR-5 - Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
- BS-2HR-6 - Specification for nickel-chromium- iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
- BS-2L-127 - Specification for ingots and castings of magnesium-zinc-zirconium alloy (precipitation treated) (Zn 4.5, Zr 0.7)
- BS-2L-504 - Specification for sheet and strip of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
- BS-2L-505 - Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)
- BS-2L-508 - Specification for bars and extruded sections of magnesium-1-+% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6)
- BS-2L-509 - Specification for tube of magnesium-1-+% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6)
- BS-2V-35 - Specification for plywood for aeronautical purposes
- BS-2V-37 - Specification for Sitka spruce as finished timber
- BS-3B-27 - Specification for copper-zinc-aluminium-nickel-silicon alloy tube
- BS-3HR-1 - Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
- BS-3HR-2 - Specification for nickel-chromium-cobalt-titanium-aluminiumheat-resistin g alloy billets, bars, forgings and parts (Nickel base, Cr19.5, Co 18.0 , Ti 2.5, Al 1.5)
- BS-3HR-201 - Specification for nickel-chromium- titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
- BS-3HR-202 - Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
- BS-3J-11 - Specification for pressure-sensitive adhesive paper masking tape
- BS-3L-124 - Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3)
- BS-3L-125 - Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3)
- BS-3L-500 - Procedure for inspection, testing and acceptance of wrought magnesium base alloys
- BS-3V-4 - Specification for aircraft material. Ash
- BS-4J-11 - Specification for pressure-sensitive adhesive paper masking tape
- BS-5V-7 - Specification for mahogany for use in airscrews
- BS-6V-3 - Specification for aircraft material. High strength plywood for aircraft
- BS-EN-2824 - Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media
- BS-EN-2952 - Aerospace series. Heat resisting alloy NI-PH2601. Solution treated and cold worked. Bar for forged fasteners. D 50 mm. 1 270 MPa Rm 1 550 MPa
- BS-EN-2957 - Aerospace series. Method of preparation of forged samples
- BS-EN-2959 - Aerospace series. Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al). Solution treated and cold worked. Bar for forged fasteners. 3 mm D 30 mm
- BS-EN-2960 - Aerospace series. Heat resisting nickel base alloy (NI- P101HT). Cold worked and solution treated. Bars for machining for fasteners. 3 mm D 50 mm
- BS-EN-3094 - Aerospace series. Sealants. Test method. determination of the application time
- BS-EN-3102 - Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
- BS-EN-3220 - Aerospace series. Heat resisting nickel base alloy (Ni-P101HT). Cold worked and softened. Bar and wire for continuous forging or extrusion for fasteners. 3 mm D 30 mm
- BS-EN-3666 - Aerospace series. Heat resisting alloy NI-PH2601. Solution treated and cold worked. Bar for forged fasteners. D 50 mm. 1 550 MPa Rm 1 830 MPa
- BS-EN-3671 - Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D 250 mm
- BS-EN-3844-2 - Aerospace series. Flammability of non-metallic materials
- BS-EN-3861 - Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Thermally tempered soda lime float glass
- BS-EN-3862 - Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Chemically tempered soda lime float glass
- BS-EN-3863 - Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of flatness
- BS-EN-3864 - Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of modulus of rupture
- BS-EN-3866 - Aerospace series. Non-metallic materials. Glass tranparencies. Test methods. Determination of ream and surface ripple
- BS-EN-4327 - Aerospace series. Heat resisting alloy CO-WH1401 (CoCr26Ni11W8). Filler metal for welding. Wire and rod
- BS-EN-4383 - Aerospace series. Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock
- BS-EN-4385 - Aerospace series. Non-metallic materials. General organization of standardization. Links between types of standards
- BS-EN-4387 - Aerospace series. Non-metallic materials. Rules for drafting and presentation of technical specifications
- BS-EN-4840-102 - Aerospace series. Heat shrinkable moulded shapes
- BS-HC-502 - Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5)
- BS-HR-203 - Specification for Nickel-Chromium-Titanium Heat-Resisting Alloy Plate, Sheet & Strip (Nick
- BS-HR-204 - Nickel-Chromium-Iron-Molybdenum-Cobalt-Tungsten Heat Resisting Alloy Plate, Sheet & St
- BS-HR-6 - Nickel-Chromium-Iron-Molybdenum-Cobalt-Tungsten Heat-Resisting Alloy Billets, Bars, Fo
- BS-L-514 - Specification for forging stock and forgings of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
- BS-L-515 - Specification for sheet and strip of magnesium-1-+% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6)
- BS-V-38 - Specification for Sitka spruce as rough timber
Other SDOs:
- EN-2824 - Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media
- EN-2825 - Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density
- EN-2952 - Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D
50 mm - 1270 MPa R<(Index)m> 1550 MPa - EN-2959 - Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm
D 30 mm - EN-3102 - Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
- EN-3220 - Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm
D 30 mm - EN-3671 - Aerospace Series, Heat Resisting Alloy NI-Ph3601 (Nicr22Mo9Nb), Non Heat Treated, Forg
- EN-3861 - Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass
- EN-3862 - Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass
- EN-3863 - Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness
- EN-3864 - Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of modulus of rupture
- EN-3866 - Aerospace series - Non-metallic materials - Glass tranparencies - Test methods - Determination of ream and surface ripple
- EN-4383 - Aerospace Series - Heat Resisting Alloy NI-Ch2601 (Nicr19Fe19Nb5Mo3) - Non Heat Treate
- SS-EN-16602-70-80 - Space product assurance - Processing and quality assurance requirements for metallic powder bed fusion technologies for space applications
- SS-EN-2344 - Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm equal to or less than D equal to or less than 180 mm - Dimensions
- SS-EN-2824 - Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media
- SS-EN-2825 - Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density
- SS-EN-2826 - Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke
- SS-EN-2952 - Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D = 50 mm - 1 270 MPa = Rm = 1 550 MPa
- SS-EN-2957 - Aerospace series - Method of preparation of forged samples
- SS-EN-2959 - Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners - 3 mm = D = 30 mm
- SS-EN-3094 - Aerospace series - Sealants - Test method - determination of the application time
- SS-EN-3102 - Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
- SS-EN-3219 - Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging extrusion for fasteners - 3 mm = D = 30 mm
- SS-EN-3220 - Aerospace series - Heat resisting nickel base alloy (Ni-P101HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm = D = 30 mm
- SS-EN-3475-513 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties)
- SS-EN-3506 - Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm less than or equal to a less than or equal to 100 mm - Dimensions
- SS-EN-3666 - Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D = 50 mm - 1 550 MPa = Rm = 1 830 MPa
- SS-EN-3671 - Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D less than a and equal to 250 mm
- SS-EN-3861 - Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Thermally tempered soda lime float glass
- SS-EN-3862 - Aerospace series - Non-metallic materials - Glass transparencies - Material standard - Chemically tempered soda lime float glass
- SS-EN-3863 - Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of flatness
- SS-EN-3864 - Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of modulus of rupture
- SS-EN-3866 - Aerospace series - Non-metallic materials - Glass tranparencies - Test methods - Determination of ream and surface ripple
- SS-EN-3882 - Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding
- SS-EN-3883 - Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding
- SS-EN-3884 - Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding
- SS-EN-3885 - Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding
- SS-EN-3886 - Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding
- SS-EN-3887 - Aerospace series - Heat resisting alloy Co-WH4101 (CoCr20W15Ni) - Filler metal for welding
- SS-EN-3888 - Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding
- SS-EN-3895 - Aerospace series - Heat resisting alloy Ni-WH3901 (NiCr16Mo15) - Filler metal for welding
- SS-EN-3917 - Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Powder or paste
- SS-EN-3918 - Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Tape
- SS-EN-3919 - Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphousfoil
- SS-EN-3922 - Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil
- SS-EN-3924 - Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape
- SS-EN-3928 - Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape
- SS-EN-3931 - Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Tape
- SS-EN-3940 - Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Tape
- SS-EN-3944 - Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape
- SS-EN-3947 - Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil
- SS-EN-3948 - Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire
- SS-EN-4104 - Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste
- SS-EN-4105 - Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape
- SS-EN-420 - Protective gloves - General requirements and test methods
- SS-EN-4244 - Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D = 200 mm - 1 000 MPa = Rm = 1 140 MPa
- SS-EN-4245 - Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - De = 300 mm
- SS-EN-4374 - Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De = 200 mm
- SS-EN-4382 - Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D ≤ 50 mm, a ≤ 3 mm
- SS-EN-4383 - Aerospace series - Heat resisting alloy Nl-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
- SS-EN-4385 - Aerospace series - Non-metallic materials - General organization of standardization - Links between types of standards
- SS-EN-4387 - Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications