Document Center List of Standards on Coatings And Related Processes Used In Aerospace Industry Coatings For General Use, See 25.220
ICS Code 49.040
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-B912 - Standard Specification for Passivation of Stainless Steels Using Electropolishing
- ASTM-E1216 - Standard Practice for Sampling for Particulate Contamination by Tape Lift
- ASTM-F1104 - Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
- ASTM-F1105 - Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
- ASTM-F1864 - Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
- ASTM-F485 - Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
- ASTM-F502 - Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
BSI:
- BS-2X-26 - Doping and finishing schemes for fabric covered aircraft
- BS-2X-27 - Specification for cellulose finishing scheme for aerospace purposes
- BS-2X-32 - Specification for pre-treatment etch primer for aerospace purposes
- BS-2X-33 - Specification for two component epoxy primer for aerospace purposes
- BS-2X-34 - Specification for two component polyurethane finish for aerospace purposes
- BS-2X-35 - Selectively removable intermediate coating for aerospace purposes
- BS-3X-17 - Specification for varnish for aeronautical purposes
- BS-4X-17 - Specification for varnish for aerospace purposes
- BS-5X-17 - Specification for oleoresinous varnish for aerospace purposes
- BS-EN-2002-1 - Aerospace series. Metallic materials. Test methods. Tensile testing at ambient temperature
- BS-EN-2334 - Chromic-sulphuric acid pickle of aluminium and aluminium alloys
- BS-EN-2434-005 - Aerospace Series, Paints & Varnishes, Two Component Cold Curing Polyurethane Finish, H
- BS-EN-2435-001 - Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. Minimum requirements
- BS-EN-2435-002 - Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance
- BS-EN-2435-003 - Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance
- BS-EN-2435-004 - Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance
- BS-EN-2435-005 - Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance for military application
- BS-EN-2436-001 - Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. Basic requirements
- BS-EN-2436-002 - Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion resistance
- BS-EN-2436-003 - Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance
- BS-EN-2436-004 - Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance
- BS-EN-2436-005 - Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. For exterior use with surface preparation tolerance
- BS-EN-2436-006 - Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer. High corrosion resistance for military application
- BS-EN-2437 - Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys
- BS-EN-2491 - Aerospace series. Molybdenum disulphide dry lubricants. Coating methods
- BS-EN-2516 - Passivation of corrosion resisting steels and decontamination of nickel base alloys
- BS-EN-2536 - Hard anodizing of aluminium alloys
- BS-EN-2757 - Aerospace series. Structural adhesives system. Test method. Determination of the drying and ignition residues of primers
- BS-EN-2808 - Anodizing of titanium and titanium alloys
- BS-EN-3665 - Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys
- BS-EN-3769 - Electrolytic polishing of corrosion resisting steels and heat resisting alloys
- BS-EN-3838 - Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
- BS-EN-3840 - Aerospace series. Paints and varnishes. Technical specification
- BS-EN-4158 - Aerospace series. Paints and varnishes. Test method for measurement of electrical surface resistance of conductive layers
- BS-EN-4159 - Aerospace series. Paints and Varnishes. Determination of resistance to microbial growth
- BS-EN-4170 - Aerospace series. Paints and varnishes. Test method for measurement of resistance to cold crack temperature cycle
- BS-EN-4171 - Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index
- BS-EN-4195 - Aerospace series. Paints and varnishes. Test method for determination of chromate leaching
- BS-EN-4382 - Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm
- BS-EN-4406 - Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant
- BS-EN-4474 - Aerospace series. Aluminium pigmented coatings. Coating methods
- BS-EN-4508 - Aerospace series. Paints and varnishes. Test method for anti slip coatings. Determination of the sliding friction behaviour
- BS-EN-4588 - Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip
- BS-EN-4594 - Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance
- BS-EN-4595 - Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance
- BS-EN-4637 - Aerospace series. Blast media. White corundum
- BS-EN-4638 - Aerospace series. Blast media. Brown corundum, without iron
- BS-EN-4687 - Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application
- BS-EN-4688 - Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application
- BS-EN-4689 - Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
- BS-EN-4704 - Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
- BS-EN-4826 - Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
- BS-EN-4827 - Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys
- BS-M-93 - Protection of magnesium-rich alloys against corrosion. Specification
- BS-X-26 - Specification for Doping and Finishing Schemes for Fabric Covered Aircraft
- BS-X-27 - Specification for cellulose finishing scheme for aeronautical purposes
- BS-X-30 - Specification for light-weight aluminium finishing scheme (cellulose base) for aeronautical purposes
- BS-X-31 - Specification for Low Temperature Stoving Scheme for Aeronautical Purposes
- BS-X-32 - Specification for pretreatment primer for aerospace purposes
- BS-X-33 - Specification for two component epoxy primer for aerospace purposes
- BS-X-35 - Specification for selectively removable intermediate coating for aerospace purposes
- BS-X-36 - Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes
- BS-X-38 - Heat curing paint scheme for aerospace purposes. Specification
ISO:
- ISO-8074 - Aerospace - Surface treatment of austenitic stainless steel parts
- ISO-8075 - Aerospace - Surface treatment of hardenable stainless steel parts
- ISO-8076 - Aerospace process - Anodic treatment of aluminium alloys - Chromic acid process 40 V DC, undyed coating
- ISO-8077 - Aerospace process - Anodic treatment of aluminium alloys - Chromic acid process 20 V DC, undyed coating
- ISO-8078 - Aerospace process - Anodic treatment of aluminium alloys - Sulfuric acid process, undyed coating
- ISO-8079 - Aerospace process - Anodic treatment of aluminium alloys - Sulfuric acid process, dyed coating
- ISO-8080 - Aerospace - Anodic treatment of titanium and titanium alloys - Sulfuric acid process
- ISO-8081 - Aerospace process - Chemical conversion coating for aluminium alloys - General purpose
Other SDOs:
- EN-16602-70-13 - Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
- EN-2334 - Chronic-Sulphuric Acid Pickle of Aluminium & Aluminium Alloys
- EN-2434-005 - Part 005: High Flexibility & Chemical Agent Resistance for Military Application, Aeros
- EN-2435-001 - Part 001: Minimum Requirements, Aerospace Series - Paints & Varnishes - Corrosion Res
- EN-2435-002 - Part 002: High Corrosion Resistance, Aerospace Series - Paints & Varnishes - Corrosion
- EN-2435-003 - Part 003: High Corrosion & Fluid Resistance, Aerospace Series - Paints & Varnishes - C
- EN-2435-004 - Part 004: High Corrosion & Fluid Resistance With Surface Preparation Tolerance, Aerosp
- EN-2435-005 - Aerospace Series - Paints & Varnishes - Corrosion Resistant Chromated Two Component C
- EN-2436-001 - Part 001: Basic Requirements, Aerospace Series - Paints & Varnishes - Corrosion Resist
- EN-2436-003 - Part 003: High Corrosion & Fluid Resistance, Aerospace Series - Paints & Varnishes - C
- EN-2436-005 - Part 005: for Exterior Use With Surface Preparation Tolerance, Aerospace Series - Pain
- EN-2491 - Aerospace series - Molybdenum disulphide dry lubricants - Coating methods
- EN-2535 - Aerospace series - Vacuum deposition of cadmium
- EN-2757 - Aerospace series - Structural adhesives system - Test method - Determination of the drying and ignition residues of primers
- EN-2808 - Anodizing of Titanium & Titanium Alloys
- EN-3665 - Test Methods for Paints & Varnishes, Filiform Corrosion Resistance Test on Aluminium A
- EN-3838 - Aerospace Series - Requirements & Tests on User-Applied Markings on Aircraft Electrica
- EN-3840 - Aerospace Series, Paints & Varnishes, Technical Specification
- EN-4158 - Aerospace Series - Paints & Varnishes - Test Method for Measurement of Electrical Surf
- EN-4159 - Aerospace series - Paints and varnishes - Determination of resistance to microbial growth
- EN-4160 - Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure
- EN-4170 - Aerospace Series, Paints & Varnishes, Test Method for Measurement of Resistance To Col
- EN-4195 - Aerospace series - Paints and varnishes - Test method for determination of chromate leaching
- EN-4382 - Aerospace Series - Heat Resisting Alloy NI-Ph3601 (Nicr22Mo9Nb) - Solution Treated - S
- EN-4406 - Aerospace Series - Paints & Varnishes - Two Component Cold Curing Polyurethane Coating
- EN-4474 - Aerospace series - Aluminium pigmented coatings - Coating methods
- EN-4476 - Aerospace series - Paints and varnishes - Cold curing intermediate coat
- EN-4508 - Aerospace Series - Paints & Varnishes - Test Method for Anti Slip Coatings - Determina
- EN-4588 - Aerospace Series - Paints & Varnishes - Two Component, Cold Curing Polyurethane Paint
- EN-4592 - Aerospace Series - Paints & Varnishes - Test Method for Determination of Infrared Refl
- EN-4593 - Aerospace series - Paints and varnishes - Determination of solar absorptance
- EN-4594 - Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
- EN-4595 - Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
- EN-4637 - Aerospace Series - Blast Media - White Corundum
- EN-4638 - Aerospace series - Blast media - Brown corundum, without iron
- EN-4687 - Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
- EN-4688 - Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application
- EN-4689 - Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
- EN-4704 - Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
- EN-4826 - Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength - 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
- EN-4827 - Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys
- SS-EN-16602-70-13 - Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
- SS-EN-2954-001 - Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 001: General requirements
- SS-EN-2954-002 - Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings
- SS-EN-3718 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes
- SS-EN-3773-006 - Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm blade terminal - Product standard
- SS-EN-4050-1 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 1: General requirements
- SS-EN-4050-2 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 2: Performance of test
- SS-EN-4050-3 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks
- SS-EN-4050-4 - Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 4: Acceptance criteria
- SS-EN-4268 - Aerospace series - Metallic materials - Heat treatment facilities - General requirements
- SS-EN-4594 - Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
- SS-EN-4595 - Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
- SS-EN-4662 - Aerospace series - Test specification for vibration control components
- SS-EN-4687 - Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
- SS-EN-4688 - Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application
- SS-EN-4689 - Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
- SS-EN-4704 - Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA)
- SS-EN-4826 - Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners
- SS-EN-4827 - Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys
- SS-ISO-8080 - Aerospace - Anodic treatment of titanium and titanium alloys - Sulfuric acid process
- SS-ISO-8081 - Aerospace process - Chemical conversion coating for aluminium alloys - General purpose