Document Center List of Standards on On-Board Equipment And Instruments Including Navigation Instruments And Telecommunications Equipment
ICS Code 49.090
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-F2411 - Standard Specification for Design and Performance of an Airborne Sense-and-Avoid System (Withdrawn 2014)
- ASTM-F3011 - Standard Specification for Performance of Angle of Attack System
- ASTM-F3153 - Standard Specification for Verification of Aircraft Systems and Equipment
- ASTM-F3238 - Standard Specification for Design and Installation of an Infrared (IR) Searchlight System (USA)
BSI:
- BS-185-14 - Glossary of aeronautical and astronautical terms
- BS-2G-112 - Specification for air-driven directional gyroscopes for aircraft
- BS-2G-113 - Specification for manifold pressure gauges for aircraft
- BS-2G-201 - Specification for counter and pointer pressure altimeters
- BS-2N-3 - Specification for gaseous breathing oxygen supplied for airborne application
- BS-3G-100-2.3.10 - Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions
- BS-3G-100-2.3.11 - Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions
- BS-3G-100-2-3.12 - Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions
- BS-3G-100-2.3.12 - Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions
- BS-3G-100-2.3.7 - Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions
- BS-3G-100-2.3.8 - Specification for General Requirements for Equipment for Usein Aircraft, All Equipment
- BS-3G-100-2.3.9 - Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions
- BS-3N-100 - Specification for general design requirements for aircraft oxygen systems and equipment
- BS-3N-3 - Breathing oxygen for airborne applications
- BS-4N-100-1 - Aircraft oxygen systems and equipment
- BS-4N-100-2 - Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen
- BS-4N-100-3 - Aircraft oxygen systems and equipment
- BS-4N-100-4 - Aircraft oxygen systems and equipment. Guide to the physiological factors
- BS-4N-100-5 - Part 5: Guide To Fire & Explosion Hazards Associated With Oxygen, Aircraft Oxygen Systems
- BS-4N-100-6 - Aircraft oxygen systems and equipment. Guidance and recommendations on the selection of materials for use with oxygen
- BS-4N-100-7 - Aircraft oxygen systems and equipment. Guide to cleaning labelling and packaging
- BS-5N-100-2 - Aircraft oxygen systems and equipment
- BS-5N-100-5 - Aircraft oxygen systems and equipment. Guide to fire and explosion hazards associated with oxygen, including handling, storage and replenishment
- BS-EN-16602-70-18 - Space product assurance. Preparation, assembly and mounting of RF coaxial cables
- BS-EN-16602-70-20 - Space product assurance. Determination of the susceptibility of silver-plated copper wire and cable to 'red-plague' corrosion
- BS-EN-16603-50-04 - Space engineering. Space data links. Telecommand protocols, synchronization and channel coding
- BS-EN-16603-60-21 - Space engineering. Gyros terminology and performance specification
- BS-EN-2591-100-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
- BS-EN-2591-227 - Aerospace series. Elements of electrical and optical connection. Test methods
- BS-EN-2591-228 - Aerospace series. Elements of electrical and optical connection. Test methods. Ferrule withdrawal force
- BS-EN-2591-307 - Aerospace series. Elements of electrical and optical connection. Test methods. Salt mist
- BS-EN-2591-315 - Aerospace series. Elements of electrical and optical connection. Test methods
- BS-EN-2591-315-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
- BS-EN-2591-402 - Aerospace series. Elements of electrical and optical connection. Test methods. Shock
- BS-EN-2591-403-TC - Tracked Changes. Aerospace series. Elements of electrical and optical connection. Test methods
- BS-EN-3375-007 - Aerospace series. Cable, electrical, for digital data transmission
- BS-EN-3375-009 - Aerospace series. Cable, electrical, for digital data transmission
- BS-EN-3375-011 - Aerospace series. Cable, electrical for digital data transmission
- BS-EN-3375-011-TC - Tracked Changes. Aerospace series. Cable, electrical for digital data transmission
- BS-EN-3375-012 - Aerospace series. Cable, electrical, for digital data transmission
- BS-EN-3716-004 - Aerospace series. Connectors, single-way with triaxial interface for transmission of digital data
- BS-EN-3745-411-TC - Tracked Changes. Aerospace series. Fibres and cables, optical, aircraft use. Test methods
- BS-EN-3745-506-TC - Tracked Changes. Aerospace series. Fibres and cables, optical, aircraft use. Test methods
- BS-EN-3745-515 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
- BS-EN-3745-516 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
- BS-EN-3745-517 - Aerospace series. Fibres and cables, optical, aircraft use. Test methods
- BS-EN-4531-201 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts
- BS-EN-4641-100 - Aerospace series. Cables, optical 125 m diameter cladding
- BS-EN-4641-101 - Aerospace series. Cables, optical 125 m diameter cladding
- BS-EN-4641-106 - Aerospace series. Cables, optical, 125 m diameter cladding
- BS-EN-4641-200 - Aerospace series. Cables, optical, 125 m diameter cladding
- BS-EN-4641-201 - Aerospace series. Cables, optical, 125 m diameter cladding
- BS-EN-4641-202 - Aerospace series. Cables, optical, 125 m diameter cladding
- BS-EN-4641-301-TC - Tracked Changes. Aerospace series. Cables, optical 125 m diameter cladding
- BS-EN-4644-001 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-002 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-003 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-011 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-012 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-013 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-014 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-021 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175C (or 125C) continuous
- BS-EN-4644-022 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175C (or 125C) continuous
- BS-EN-4644-023 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175C (or 125C) continuous
- BS-EN-4644-024 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-025 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-026 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-131 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-133 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-141 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-142 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4644-201 - Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous
- BS-EN-4645-001 - Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder
- BS-EN-4660-003 - Aerospace series. Modular and Open Avionics Architectures
- BS-EN-4660-004 - Aerospace series. Modular and open avionics architectures
- BS-EN-4701-001 - Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4531-101 contacts
- BS-EN-4701-002 - Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4531-101 contacts
- BS-EN-4701-003 - Aerospace series. Connectors, optical, rectangular, modular,operating temperature 125C, for EN 4531-101 contacts
- BS-EN-4830-001 - Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts
- BS-EN-4830-002 - Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts
- BS-EN-61347-2-6 - Lamp Controlgear. Particular Requirements for D.C. Supplied Electronic Ballasts for Aircraft Lighting
- BS-F-140 - Glossary of parachute terms
- BS-G-201 - Specification for counter and pointer pressure altimeters
- BS-G-217 - Specification for general requirements for cockpit lighting controllers
- BS-G-220 - Specification. Crimped terminations to stranded flexible thermocouple cables of the nickel-chromium and nickel-aluminium types
- BS-G-234 - Specification for self-aligning air flow angle transmitters for use on aircraft
- BS-G-240 - Specification for pressure transducers for use on aircraft
- BS-N-6 - Specification for aeromedical portable oxygen concentrator systems. General requirements
ISO:
- ISO-10201 - Aerospace -- Standards for electronic instruments and systems
- ISO-268 - Aircraft - Mechanical and electromechanical indicators - General requirements
- ISO-5065-1 - Aircraft - Magnetic indicators - Part 1 : Characteristics
- ISO-5065-2 - Aircraft - Magnetic indicators - Part 2 : Tests
- ISO-6702-1 - Aircraft - Requirements for on-board weight and balance systems - Part 1: General
- ISO-6702-2 - Aircraft - Requirements for on-board weight and balance systems - Part 2: Design, performance and interface characteristics
Other SDOs:
- EN-16602-70-18 - Space product assurance - Preparation, assembly and mounting of RF coaxial cables
- EN-16602-70-20 - Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to 'red-plague' corrosion
- EN-16603-50-04 - Space engineering - Space data links - Telecommand protocols, synchronization and channel coding
- EN-2591-100 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
- EN-2591-2124 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse
- EN-2591-214 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse
- EN-2591-227 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test
- EN-2591-307 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist
- EN-2591-315 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance
- EN-2591-402 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock
- EN-2591-403 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
- EN-3375-007 - Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard
- EN-3375-009 - Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard
- EN-3375-011 - Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard
- EN-3375-012 - Aerospace series - Cable, electrical, for digital data transmission - Part 012: Single braid - Star Quad 100 ohms - 260 Degrees C - Type KH - Product standard
- EN-3716-004 - Aerospace series - Connectors, single-way with triaxial interface for transmission of digital data - Part 004: Solder plug and terminator - Product standard
- EN-3745-301 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation
- EN-3745-405 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
- EN-3745-410 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life
- EN-3745-510 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
- EN-3745-515 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force
- EN-3745-516 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test
- EN-3745-517 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
- EN-4531-001 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 001: Technical specification
- EN-4531-201 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 201: Optical contact for EN 4641 singlemode cable -55 Degrees C to 125 Degrees C - Product standard
- EN-4641-100 - Aerospace series - Cables, optical 125 -¦m diameter cladding - Part 100: Tight structure 62,5/125 -¦m core GI fibre 1,8 mm outside diameter - Product standard
- EN-4641-101 - Aerospace series - Cables, optical 125 -¦m diameter cladding - Part 101: Tight structure 62,5 -¦m core GI fibre 0,9 mm outside diameter - Product standard
- EN-4641-104 - Aerospace series - Cables, optical 125 -¦m diameter cladding - Part 104: Semi-loose, ruggedized duplex construction 62,5/125 -¦m GI fibre nominal, 4,95 mm outside diameter - Product standard
- EN-4641-105 - Aerospace series - Cables, optical 125 -¦m diameter cladding - Part 105: Semi-loose, ruggedized quadraxial construction 62,5/125 -¦m GI fibre nominal, 5,72 mm outside diameter - Product standard
- EN-4641-106 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 106: Semi-loose structure 62,5/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard
- EN-4641-201 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter - Product standard
- EN-4641-202 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 202: Semi-loose, ruggedized simplex construction 9/125 µm SM fibre nominal 2,74 mm outside diameter - Product standard
- EN-4641-301 - Aerospace series - Cables, optical 125 -¦m diameter cladding - Part 301: Tight structure 50/125 -¦m GI fibre nominal 1,8 mm outside diameter - Product standard
- EN-4644-001 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 001: Technical specification
- EN-4644-002 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 002: Specification of performance and contact arrangements
- EN-4644-003 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 003: Rectangular inserts - Product standard
- EN-4644-011 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 011: Plug, size 1, without mounting holes, class A, C and E - Product standard
- EN-4644-012 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 012: Receptacle, size 1, class A, C and E - Product standard
- EN-4644-013 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 013: Plug, size 1, with ground block, without mounting holes, class B and F - Product standard
- EN-4644-014 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 014: Receptacle, size 1, with ground block, class B and F - Product standard
- EN-4644-021 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 021: Plug, size 2, without mounting holes, class A, C and E - Product standard
- EN-4644-022 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 022: Plug, size 2, with mounting holes, class A, C and E - Product standard
- EN-4644-023 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 023: Plug, size 2, with ground block, class B and F - Product standard
- EN-4644-024 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 024: Receptacle size 2, class A, C and E - Product standard
- EN-4644-025 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 025: Receptacle, size 2, with flange, class A, C and E - Product standard
- EN-4644-026 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 026: Receptacle size 2 with ground block, class B and F - Product standard
- EN-4644-131 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 131: Size 3 plug for rack and panel applications, class C and D - Product standard
- EN-4644-133 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 133: Size 3 receptacle for rack and panel application, class C and D - Product Standard
- EN-4644-141 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 141: Size 4 plug for rack and panel applications, class C and D - Product standard
- EN-4644-142 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 142: Size 4 receptacle for rack and panel application, class C and D - Product standard
- EN-4644-201 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 Degrees C (or 125 Degrees C) continuous - Part 201: Locking and polarizing hardware - Product standard
- EN-4645-001 - Part 001: Technical Specification, Aerospace Series - Connectors, Optical, Circular, S
- EN-4660-001 - Aerospace series - Modular and Open Avionics Architectures - Part 001: Architecture
- EN-4660-002 - Aerospace series - Modular and Open Avionics Architectures - Part 002: Common Functional Modules
- EN-4660-003 - Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Network
- EN-4660-004 - Aerospace series - Modular and Open Avionics Architectures - Part 004: Packaging
- EN-4660-005 - Aerospace series - Modular and Open Avionics Architectures - Part 005: Software
- EN-4701-001 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 Degrees C, for EN 4531 contacts - Part 001: Technical specification
- EN-4701-002 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 Degrees C, for EN 4531-101 contacts - Part 002: Specification of performance
- EN-4701-003 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 Degrees C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard
- EN-4830-001 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 Degrees C, for EN 4639-10X contacts - Part 001: Technical specification
- EN-4830-002 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 Degrees C, for EN 4639-10X contacts - Part 002: Specification of performance
- SS-EN-16602-70-18 - Space product assurance - Preparation, assembly and mounting of RF coaxial cables
- SS-EN-16602-70-20 - Space product assurance - Determination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion
- SS-EN-16603-50-04 - Space engineering - Space data links - Telecommand protocols, synchronization and channel coding
- SS-EN-16603-60-21 - Space engineering - Gyros terminology and performance specification
- SS-EN-2591-100 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
- SS-EN-2591-214 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse
- SS-EN-2591-227 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 227: Partial discharges test
- SS-EN-2591-228 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 228: Ferrule withdrawal force
- SS-EN-2591-307 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist
- SS-EN-2591-315 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance
- SS-EN-2591-402 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock
- SS-EN-2591-403 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
- SS-EN-3197 - Aerospace series - Design and installation of aircraft electrical and optical interconnection systems
- SS-EN-3375-001 - Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
- SS-EN-3375-007 - Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard
- SS-EN-3375-009 - Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard
- SS-EN-3375-011 - Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
- SS-EN-3375-012 - Aerospace series - Cable, electrical, for digital data transmission - Part 012: Single braid - Star Quad 100 ohms - 260 °C - Type KH - Product standard
- SS-EN-3716-004 - Aerospace series - Connectors, single-way with triaxial interface for transmission of digital data - Part 004: Solder plug and terminator - Product standard
- SS-EN-3745-301 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation
- SS-EN-3745-404 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
- SS-EN-3745-405 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
- SS-EN-3745-410 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life
- SS-EN-3745-411 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids
- SS-EN-3745-412 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
- SS-EN-3745-505 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
- SS-EN-3745-506 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance
- SS-EN-3745-510 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
- SS-EN-3745-515 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 515: Buffer insertion force
- SS-EN-3745-516 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test
- SS-EN-3745-517 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
- SS-EN-4264 - Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D = 200 mm
- SS-EN-4531-201 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threades ring - Flush contacts - Part 201: Optical contact for EN 4641 singlemode cable -55 °C to 125 °C - Product standard
- SS-EN-4626-201 - Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 degrees Celsius to 125 degrees Celsius (cable dependent) - Flush contacts - Part 201: Optical contact (sub-assembly) for receptacle - Product standard
- SS-EN-4626-202 - Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 degrees Celsius to 125 degrees Celsius (cable dependent) - Flush contacts - Part 202: Optical contact assembly for 900 µm buffered fibre receptacle - Product standard
- SS-EN-4641-100 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 100: Tight structure 62,5/125 µm core GI fibre 1,8 mm outside diameter - Product standard
- SS-EN-4641-101 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 101: Tight structure 62,5 µm core GI fibre 0,9 mm outside diameter - Product standard
- SS-EN-4641-103 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard
- SS-EN-4641-105 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 105: Semi-loose, ruggedized quadraxial construction 62,5/125 µm GI fibre nominal, 5,72 mm outside diameter - Product standard
- SS-EN-4641-106 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 106: Semi-loose structure 62,5/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard
- SS-EN-4641-200 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 200: Semi-loose structure 9/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard
- SS-EN-4641-201 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter - Product standard
- SS-EN-4641-202 - Aerospace series - Cables, optical, 125 µm diameter cladding - Part 202: Semi-loose, ruggedized simplex construction 9/125 µm SM fibre nominal 2,74 mm outside diameter - Product standard
- SS-EN-4641-301 - Aerospace series - Cables, optical 125 µm diameter cladding - Part 301: Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter - Product standard
- SS-EN-4644-001 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification
- SS-EN-4644-002 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 002: Specification of performance and contact arrangements
- SS-EN-4644-003 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 003: Rectangular inserts - Product standard
- SS-EN-4644-011 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 011: Plug, size 1, without mounting holes, class A, C and E - Product standard
- SS-EN-4644-012 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 012: Receptacle, size 1, class A, C and E - Product standard
- SS-EN-4644-013 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 013: Plug, size 1, with ground block, without mounting holes, class B and F - Product standard
- SS-EN-4644-014 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 014: Receptacle, size 1, with ground block, class B and F - Product standard
- SS-EN-4644-021 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 021: Plug, size 2, without mounting holes, class A, C and E - Product standard
- SS-EN-4644-022 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 022: Plug, size 2, with mounting holes, class A, C and E - Product standard
- SS-EN-4644-023 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 023: Plug, size 2, with ground block, class B and F - Product standard
- SS-EN-4644-024 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 024: Receptacle size 2, class A, C and E - Product standard
- SS-EN-4644-025 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 025: Receptacle, size 2, with flange, class A, C and E - Product standard
- SS-EN-4644-026 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 026: Receptacle size 2 with ground block, class B and F - Product standard
- SS-EN-4644-131 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 131: Size 3 plug for rack and panel applications, class C and D - Product standard
- SS-EN-4644-133 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 133: Size 3 receptacle for rack and panel application, class C and D - Product Standard
- SS-EN-4644-141 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 141: Size 4 plug for rack and panel applications, class C and D - Product standard
- SS-EN-4644-142 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 142: Size 4 receptacle for rack and panel application, class C and D - Product standard
- SS-EN-4644-201 - Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 201: Locking and polarizing hardware - Product standard
- SS-EN-4645-001 - Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification
- SS-EN-4660-001 - Aerospace series - Modular and Open Avionics Architectures - Part 001: Architecture
- SS-EN-4660-002 - Aerospace series - Modular and Open Avionics Architectures - Part 002: Common Functional Modules
- SS-EN-4660-003 - Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Network
- SS-EN-4660-004 - Aerospace series - Modular and open avionics architectures - Part 004: Packaging
- SS-EN-4660-005 - Aerospace series - Modular and Open Avionics Architectures - Part 005: Software
- SS-EN-4701-001 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 001: Technical specification
- SS-EN-4701-002 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 002: Specification of performance
- SS-EN-4701-003 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard
- SS-EN-4830-001 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 001: Technical specification
- SS-EN-4830-002 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 002: Specification of performance