Document Center List of Standards on Components For Conveyors Including Conveyor Belts, Chains, Chain Wheels, Etc.
ICS Code 53.040.20
Return to ICS Index.Up to Level 2:
The following documents are a part of this series:
ASTM:
BSI:
- BS-2969 - Specification for high-tensile steel chains (round link) for chain conveyors and coal ploughs
- BS-3289 - Textile carcase conveyor belting for use in underground mines (including fire performance). Specification
- BS-4116-4 - Conveyor chains, their attachments and associated chain wheels.
- BS-4890 - Test methods for mechanical joints in conveyor belting
- BS-490-1 - Conveyor and elevator belting. Specification for rubber and plastics conveyor belting of textile construction for general use
- BS-490-10.1 - Introduction- Conveyor and Elevator Belting - Testing for Physical Properties
- BS-490-10.4 - Conveyor and elevator belting. Testing for physical properties. Method for determination of adhesion strength of rubber and plastics belting of textile construction
- BS-490-10.5 - Conveyor and elevator belting. Testing for physical properties. Method for determination of tensile strength and elongation at break of rubber covers
- BS-490-10.7 - Conveyor and elevator belting. Testing for physical properties. Method for determination of length of an endless belt
- BS-490-11.1 - Conveyor and elevator belting. Methods of test for safety. Laboratory flame tests
- BS-490-11.2 - Low Energy & High Energy Propane Gallery Tests
- BS-490-11.3 - Conveyor and elevator belting. Methods of test for safety. Drum friction tests
- BS-490-2 - Conveyor and elevator belting. Rubber and plastics belting of textile construction for use on bucket elevators
- BS-490-3 - Conveyor and elevator belting. Specification for flammability and anti-static properties of rubber and of plastics conveyor belting of textile construction for general use
- BS-5767 - Guide for Storage & Handling of Conveyor Belts
- BS-6593 - Code of practice for On-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
- BS-7622-1 - Measurement of smoke density of electric cables burning under defined conditions. Test apparatus
- BS-8407 - Specification for mechanical and spliced joints in conveyor belting for use underground
- BS-EN-12881-1 - Conveyor belts. Fire simulation flammability testing
- BS-EN-12881-2 - Conveyor belts. Fire simulation flammability testing
- BS-EN-12882 - Conveyor belts for general purpose use. Electrical and flammability safety requirements
- BS-EN-12882-TC - Tracked Changes. Conveyor belts for general purpose use. Electrical and flammability safety requirements
- BS-EN-14973 - Conveyor belts for use in underground installations. Electrical and flammability safety requirements
- BS-EN-14973-TC - Tracked Changes. Conveyor belts for use in underground installations. Electrical and flammability safety requirements
- BS-EN-1554 - Conveyor belts. Drum friction testing
- BS-EN-1637 - Light conveyor belts. Test methods for the measurement of the electrical resistances
- BS-EN-16974 - Conveyor belts. Indentation rolling resistance related to belt width. Requirements, testing
- BS-EN-1718 - Light conveyor belts. Test method for the measurement of the electrostatic field generated by a running light conveyor belt
- BS-EN-1722 - Light Conveyor Belts - Test Method for the Determination Ofthe Maximum Tensile
- BS-EN-1723 - Light Conveyor Belts, Method of Test for the Determination of the Relaxed Elastic Modu
- BS-EN-1724 - Light conveyor belts. Test method for the determination of the coefficient of friction
- BS-EN-20284 - Conveyor belts. Electrical conductivity. Specification and method of test
- BS-EN-20340 - Conveyor belts. Flame retardation. Specifications and test method
- BS-EN-28094 - Steel cord conveyor belts. Adhesion strength test of the cover to the core layer
- BS-EN-ISO-1120 - Conveyor belts. Determination of strength of mechanical fastenings. Static test method
- BS-EN-ISO-14890 - Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
- BS-EN-ISO-15147 - Light conveyor belts. Tolerances on widths and lengths of cut light conveyor belts
- BS-EN-ISO-15236-1 - Steel cord conveyor belts
- BS-EN-ISO-15236-2 - Steel cord conveyor belts
- BS-EN-ISO-15236-3 - Steel cord conveyor belts
- BS-EN-ISO-15236-3-TC - Tracked Changes. Steel cord conveyor belts
- BS-EN-ISO-15236-4 - Steel cord conveyor belts
- BS-EN-ISO-16851 - Textile conveyor belts. Determination of the net length of an endless (spliced) conveyor belt
- BS-EN-ISO-20238 - Conveyor belts. Drum friction testing
- BS-EN-ISO-21183-1 - Light conveyor belts
- BS-EN-ISO-21183-2 - Light conveyor belts
- BS-EN-ISO-22721 - Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
- BS-EN-ISO-252 - Conveyor belts. Adhesion between constitutive elements. Test methods
- BS-EN-ISO-252-1 - Textile conveyor belts. Adhesive strength between constitutive elements. Methods of test
- BS-EN-ISO-283 - Textile conveyor belts. Full thickness tensile strength, elongation at break and elongation at the reference load. Test method
- BS-EN-ISO-283-1 - Textile conveyor belts. Full thickness tensile testing. Determination of tensile strength, elongation at break and elongation at the reference load
- BS-EN-ISO-340 - Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
- BS-EN-ISO-340-TC - Tracked Changes. Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method
- BS-EN-ISO-505 - Conveyor belts. Method for the determination of the tear propagation resistance of textile conveyor belts
- BS-EN-ISO-505-TC - Tracked Changes. Conveyor belts. Method for the determination of the tear propagation resistance of textile conveyor belts
- BS-EN-ISO-583 - Conveyor belts with a textile carcass. Total belt thickness and thickness of constitutive elements. Test methods
- BS-EN-ISO-703 - Conveyor belts. Transverse flexibility (troughability). Test method
- BS-EN-ISO-703-1 - Conveyor belts. Transverse flexibility and troughability. Test method
- BS-EN-ISO-7590 - Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
- BS-EN-ISO-7622-1 - Steel cord conveyor belts. Longitudinal traction test
- BS-EN-ISO-7622-2 - Steel cord conveyor belts.Longitudinal traction test
- BS-EN-ISO-7622-2-TC - Tracked Changes. Steel cord conveyor belts. Longitudinal traction test
- BS-EN-ISO-7623 - Steel cord conveyor belts. Cord-to-coating bond test. Initial test and after thermal treatment
- BS-EN-ISO-8094 - Steel cord conveyor belts. Adhesion strength test of the cover to the core layer
- BS-EN-ISO-9856 - Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus
- BS-ISO-1275 - Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
- BS-ISO-18573 - Conveyor belts. Test atmospheres and conditioning periods
- BS-ISO-1977 - Conveyor chains, attachments and sprockets
- BS-ISO-23586 - Conveyor belts. Indentation rolling resistance related to belt width. Requirements and testing
- BS-ISO-251 - Conveyor belts with textile carcass. Widths and lengths
- BS-ISO-4195 - Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods
- BS-ISO-433 - Conveyor belts. Marking
- BS-ISO-5285 - Conveyor belts. Guidelines for storage and handling
- BS-ISO-5293 - Conveyor belts. Determination of minimum transition distance on three idler rollers
ISO:
- ISO-10247 - Conveyor belts - Characteristics of covers - Classification
- ISO-10247-1 - Conveyor belts - Characteristics of covers - Classification - Amendment 1
- ISO-1082 - Mining - Shackle type connector units for chain conveyors
- ISO-1120 - Conveyor belts - Determination of strength of mechanical fastenings - Static test method
- ISO-1275 - Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
- ISO-14890 - Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
- ISO-15147 - Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts
- ISO-15236-1 - Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
- ISO-15236-2 - Steel cord conveyor belts - Part 2: Preferred belt types
- ISO-15236-3 - Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations
- ISO-15236-4 - Steel cord conveyor belts - Part 4: Vulcanized belt joints
- ISO-1535 - Continuous mechanical handling equipment for loose bulk materials - Troughed belt conveyors (other than portable conveyors) - Belts
- ISO-1536 - Continuous mechanical handling equipment for loose bulk materials - Troughed belt conveyors (other than portable conveyors) - Belt pulleys
- ISO-1537 - Continuous mechanical handling equipment for loose bulk materials - Troughed belt conveyors (other than portable conveyors) - Idlers
- ISO-16851 - Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt
- ISO-1816 - Continuous mechanical handling equipment for loose bulk materials and unit loads - Belt conveyors - Basic characteristics of motorized driving pulleys
- ISO-18573 - Conveyor belts - Test atmospheres and conditioning periods
- ISO-1977 - Conveyor chains, attachments and sprockets
- ISO-20238 - Conveyor belts - Drum friction testing
- ISO-21180 - Light conveyor belts - Determination of the maximum tensile strength
- ISO-21181 - Light conveyor belts - Determination of the relaxed elastic modulus
- ISO-21183-1 - Light conveyor belts - Part 1: Principal characteristics and applications
- ISO-21183-2 - Light conveyor belts - Part 2: List of equivalent terms
- ISO-22721 - Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining
- ISO-23586 - Conveyor belts - Indentation rolling resistance related to belt width - Requirements and testing
- ISO-251 - Conveyor belts with textile carcass - Widths and lengths
- ISO-252 - Conveyor belts - Adhesion between constitutive elements - Test methods
- ISO-252-1 - Part 1: Methods of Test, Textile Conveyor Belts - Adhesive Strength Between Constitute Ele
- ISO-282 - Conveyor belts - Sampling
- ISO-283 - Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
- ISO-283-1 - Part 1: Determination of Tensile Strength, Elongation at Break and Elongation at the Referen
- ISO-340 - Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
- ISO-3684 - Conveyor belts - Determination of minimum pulley diameters
- ISO-3684-1 - Conveyor belts - Determination of minimum pulley diameters for belt-conveyors - Amendment 1
- ISO-3870 - Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials - Adjustment of take-up device
- ISO-4123 - Belt conveyors - Impact rings for carrying idlers and discs for return idlers - Main dimensions
- ISO-4195 - Conveyor belts with heat-resistant rubber covers - Heat resistance of covers - Requirements and test methods
- ISO-4195-1 - Conveyor belts - Heat resistance - Part 1 : Test method
- ISO-4195-2 - Conveyor belts - Heat resistance - Part 2 : Specifications
- ISO-432 - Ply type conveyor belts - Characteristics of construction
- ISO-433 - Conveyor belts - Marking
- ISO-433-1 - Conveyor belts - Branding - Amendment 1
- ISO-4348 - Flat-top chains and associated chain wheels for conveyors
- ISO-505 - Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts
- ISO-5284 - Conveyor belts - List of equivalent terms
- ISO-5285 - Conveyor belts - Guidelines for storage and handling
- ISO-5293 - Conveyor belts - Determination of minimum transition distance on three idler rollers
- ISO-5612 - Mining - Scraper bars for chain conveyors
- ISO-5613 - Mining - Drive sprocket assemblies for chain conveyors
- ISO-583 - Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods
- ISO-583-1 - Part 1: Methods of Test, Conveyor Belts With a Textile Carcass - Total Thickness and Thickne
- ISO-610 - High-tensile steel chains (round link) for chain conveyors and coal ploughs
- ISO-6973 - Drop-forged rivetless chains for conveyors
- ISO-703 - Conveyor belts - Transverse flexibility (troughability) - Test method
- ISO-703-1 - Part 1: Test Method, Conveyor Belts - Transverse Flexibility and Troughability
- ISO-7590 - Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
- ISO-7622-1 - Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation
- ISO-7622-2 - Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength
- ISO-7623 - Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment
- ISO-8094 - Steel cord conveyor belts - Adhesion strength test of the cover to the core layer
- ISO-8865 - Mining - Guidance on methods of verifying dimensions of sprocket assemblies for chain conveyors
- ISO-9856 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- ISO-9856-AM1 - Conveyor belts - Determination of elastic modulus - Amendment 1
Other SDOs:
- BS-EN-ISO-7590-TC - Tracked Changes. Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness
- DIN-15207-1 - Continuous mechanical handling equipment - Idlers for belt conveyors - Main dimensions of idlers for belt conveyors for bulk material
- DIN-8181 - Roller chains, double pitch
- DIN-EN-12881-1 - Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests; German version EN 12881-1:2014
- DIN-EN-12881-2 - Part 2: Large Scale Fire Test, Conveyor Belts - Fire Simulation Flammability Testing
- DIN-EN-12882 - Conveyor belts for general purpose use - Electrical and flammability safety requirements; German version EN 12882:2015
- DIN-EN-ISO-1120 - Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)
- DIN-EN-ISO-14890 - Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013)
- DIN-EN-ISO-15236-1 - Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
- DIN-EN-ISO-15236-2 - Steel cord conveyor belts - Part 2: Preferred belt types
- DIN-EN-ISO-15236-4 - Part 4: Vulcanized Belt Joints, Steel Cord Conveyor Belts
- DIN-EN-ISO-16851 - Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2012)
- DIN-EN-ISO-21178 - Light conveyor belts - Determination of electrical resistances (ISO 21178:2013)
- DIN-EN-ISO-21179 - Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt (ISO 21179:2013)
- DIN-EN-ISO-21180 - Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2013)
- DIN-EN-ISO-21181 - Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013)
- DIN-EN-ISO-21182 - Light conveyor belts - Determination of the coefficient of friction (ISO 21182:2013)
- DIN-EN-ISO-21183-1 - Part 1: Principal Characteristics & Applications, Light Conveyor Belts
- DIN-EN-ISO-21183-2 - Part 2: List of Equivalent Terms, Light Conveyor Belts
- DIN-EN-ISO-284 - Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012)
- DIN-EN-ISO-340 - Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013)
- DIN-EN-ISO-9856 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- EN-12881-1 - Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
- EN-12881-2 - Part 2: Large Scale Fire Test, Conveyor Belts - Fire Simulation Flammability Testing
- EN-12882 - Conveyor belts for general purpose use - Electrical and flammability safety requirements
- EN-13827 - Steel Cord Conveyor Belts, Determination of the Lateral & Vertical Displacement of Ste
- EN-14973 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
- EN-1554 - Conveyor belts - Drum friction testing
- EN-16974 - Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing
- EN-1718 - Test Method for the Measurement of the Electrostatic Field Generated by a Running Ligh
- EN-873 - Light Conveyor Belts, Principal Characteristics & Applications
- EN-ISO-1120 - Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)
- EN-ISO-14890 - Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013)
- EN-ISO-15147 - Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012)
- EN-ISO-15236-1 - Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
- EN-ISO-15236-2 - Steel cord conveyor belts - Part 2: Preferred belt types
- EN-ISO-15236-3 - Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations
- EN-ISO-15236-4 - Part 4: Vulcanized Belt Joints, Steel Cord Conveyor Belts
- EN-ISO-16851 - Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2012)
- EN-ISO-20238 - Conveyor belts - Drum friction testing (ISO 20238:2018)
- EN-ISO-21180 - Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2013)
- EN-ISO-21181 - Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013)
- EN-ISO-21183-1 - Part 1: Principal Characteristics & Applications, Light Conveyor Belts
- EN-ISO-21183-2 - Light Conveyor Belts, List of Equivalent Terms
- EN-ISO-22721 - Conveyor Belts - Specification for Rubber- or Plastics-Covered Conveyor Belts of Texti
- EN-ISO-252 - Conveyor Belts, Adhesion Between Constitutive Elements, Test Methods
- EN-ISO-283 - Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
- EN-ISO-340 - Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013)
- EN-ISO-583 - Conveyor Belts With a Textile Carcass, Total Belt Thickness & Thickness of Constituti
- EN-ISO-703 - Conveyor belts - Transverse flexibility (troughability) - Test method
- EN-ISO-7590 - Steel Cord Conveyor Belts - Methods for the Determination of Total Thickness & Cover T
- EN-ISO-7622-1 - Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:2013)
- EN-ISO-7622-2 - Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength
- EN-ISO-7623 - Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment
- EN-ISO-8094 - Steel cord conveyor belts - Adhesion strength test of the cover to the core layer (ISO 8094:2013)
- EN-ISO-9856 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus
- SIS-CEN/TR-17838 - Use of plugs of bulk material in screw conveyors and product receivers for explosion isolation
- SS-EN-12881-1 - Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
- SS-EN-12881-2 - Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
- SS-EN-12882 - Conveyor belts for general purpose use - Electrical and flammability safety requirements
- SS-EN-13827 - Steel cord conveyor belts - Determination of the lateral and vertical displacement of steel cords
- SS-EN-14658 - Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining
- SS-EN-14973 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
- SS-EN-1554 - Conveyor belts - Drum friction testing
- SS-EN-1637 - Light conveyor belts - Test methods for the measurement of the electrical resistances
- SS-EN-16974 - Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing
- SS-EN-1718 - Light conveyor belts - Test methods for measurement of electrostatic field generated by a running light conveyor belt
- SS-EN-1722 - Light conveyor belts - Test method for the determination of the maximum tensile strength
- SS-EN-1723 - Light conveyor belts - Method of test for the determination of the relaxed elastic modulus
- SS-EN-1724 - Light conveyor belts - Test method for the determination of the coefficient of friction
- SS-EN-20284 - Conveyor belts - Electrical conductivity - Specification and method of test
- SS-EN-20340 - Conveyor belts - Flame retardation - Specifications and test method
- SS-EN-28094 - Steel cord conveyor belts - Adheision strength test of the cover to the core layer
- SS-EN-873 - Light conveyor belts - Principal characteristics and applications
- SS-EN-ISO-1120 - Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012)
- SS-EN-ISO-14890 - Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013)
- SS-EN-ISO-15147 - Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012)
- SS-EN-ISO-15236-1 - Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016)
- SS-EN-ISO-15236-2 - Steel cord conveyor belts - Part 2: Preferred belt types (ISO 15236-2:2017)
- SS-EN-ISO-15236-3 - Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017)
- SS-EN-ISO-15236-4 - Steel cord conveyor belts - Part 4: Vulcanized belt joints (ISO 15236-4:2004)
- SS-EN-ISO-16851 - Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2012)
- SS-EN-ISO-20238 - Conveyor belts - Drum friction testing (ISO 20238:2018)
- SS-EN-ISO-21180 - Light conveyor belts - Determination of the maximum tensile strength (ISO 21180:2013)
- SS-EN-ISO-21181 - Light conveyor belts - Determination of the relaxed elastic modulus (ISO 21181:2013)
- SS-EN-ISO-21183-1 - Light conveyor belts - Part 1: Principal characteristics and applications (ISO 21183-1:2005)
- SS-EN-ISO-21183-2 - Light conveyor belts - Part 2: List of equivalent terms (ISO 21183-2:2018)
- SS-EN-ISO-22721 - Conveyor belts - Specification for rubber or plastics covered conveyor belts of textile construction for underground mining (ISO 22721:2007)
- SS-EN-ISO-252 - Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2007)
- SS-EN-ISO-252-1 - Textile conveyor belts - Adhesive strength between constitutive elements - Part 1: Methods of test (ISO 252-1:1999)
- SS-EN-ISO-283 - Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2015)
- SS-EN-ISO-340 - Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2022)
- SS-EN-ISO-505 - Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:2017)
- SS-EN-ISO-583 - Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2007)
- SS-EN-ISO-583-1 - Conveyor belts with carcass - Total thickness and thickness of elements - Part 1: Method of test (ISO 583-1:1999)
- SS-EN-ISO-703 - Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017)
- SS-EN-ISO-703-1 - Conveyor belts - Transverse flexilibility and troughability - Part 1: Test method (ISO 703-1:1999)
- SS-EN-ISO-7590 - Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018)
- SS-EN-ISO-7622-1 - Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:2013)
- SS-EN-ISO-7622-2 - Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (ISO 7622-2:2022)
- SS-EN-ISO-7623 - Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment (ISO 7623:2022)
- SS-EN-ISO-8094 - Steel cord conveyor belts - Adhesion strength test of the cover to the core layer (ISO 8094:2013)
- SS-EN-ISO-9856 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016)
- SS-EN-ISO-9856-AM1 - Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012)
- SS-ISO-15077 - Tractors and self-propelled machinery for agriculture - Operator controls - Actuating forces, displacement, location and method of operation (ISO 15077:2020, IDT)
- SS-ISO-1536 - Continuous mechanical handling equipment for loose bulk materials Troughed belt conveyors (other than portable conveyors) Belt pulleys (ISO 1536:1975, IDT)
- SS-ISO-16526-2 - Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method (ISO 16526-2:2011, IDT)
- SS-ISO-1816 - Continuous mechanical handling equipment for loose bulk materials and unit loads Belt conveyors Basic characteristics of motorized driving pulleys (ISO 1816:1975, IDT)
- SS-ISO-19111 - Geographic information - Referencing by coordinates (ISO 19111:2019, IDT)
- SS-ISO-2109 - Continuous mechanical handling equipment Light duty belt conveyors for loose bulk materials (ISO 2109:1975, IDT)
- SS-ISO-22636 - Adhesives - Adhesives for floor coverings - Requirements for mechanical and electrical performance (ISO 22636:2020, IDT)
- SS-ISO-251 - Conveyor belts with textile carcass Widths and lengths (ISO 251:2012, IDT)
- SS-ISO-36 - Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics (ISO 36:2020, IDT)
- SS-ISO-3862 - Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids - Specification (ISO 3862:2020, IDT)
- SS-ISO-4123 - Belt conveyors - Impact rings for carrying idlersand discs for return idlers - Main dimensions
- SS-ISO-433 - Conveyor belts - Marking (ISO 433:2017, IDT)
- SS-ISO-5029 - Continuous mechanical handling equipment for loose bulk materials - Storage equipment fed by a pneumatic handling system - Safety code
- SS-ISO-583 - Rubber and rubber products - Determination of chlorine and bromine content (ISO 7725:2020, IDT)
- SS-ISO-8094 - Steel cord conveyor belts - Adhesion strength test of the cover to the core layer
- SS-ISO/TR-5045 - Continuous mechanical handling equipment - Safetycode for belt conveyors - Examples for guarding of nip points
- SS-ISO/TR-5046 - Continuous mechanical handling equipment - Safetycode for conveyors and elevators with chain-elements - Examples for guarding of nip points
- UNE-EN-ISO-15236-1 - Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use
- UNE-EN-ISO-15236-2 - Steel cord conveyor belts - Part 2: Preferred belt types
- UNI-EN-ISO-340 - Conveyor Belts - Laboratory Scale Flammability Characteristics - Requirements & Test M