Document Center List of Standards on Packaging Materials And Accessories Including Wrappers, Paper, Films, Foils, Cords, Sealing Devices, Cushioning, Etc. Adhesive Tapes For General Purposes, See 83.180
ICS Code 55.040
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-D1251 - Standard Test Method for Water Vapor Permeability of Packages by Cycle Method (Withdrawn 1999)
- ASTM-D1580 - Specification for Liquid Adhesives for Automatic Machine Labeling of Glass Bottles
- ASTM-D1581 - Method of Test for Bonding Permanency of Water-or Solvent-Soluble Adhesives for Labeling Glass Bottles (Withdrawn 1991)
- ASTM-D1596 - Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
- ASTM-D2063 - Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
- ASTM-D2221 - Standard Test Method for Creep Properties of Package Cushioning Materials
- ASTM-D2684 - Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products (Withdrawn 2024)
- ASTM-D2860 - Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress
- ASTM-D3078 - Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
- ASTM-D3079 - Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products (Withdrawn 2018)
- ASTM-D3103 - Standard Test Method for Thermal Insulation Performance of Distribution Packages
- ASTM-D3198 - Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures (Withdrawn 2016)
- ASTM-D3199 - Standard Test Method for Water Vapor Transmission Through Screw-Cap Closure Liners (Withdrawn 2001)
- ASTM-D3332 - Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
- ASTM-D3344 - Standard Test Method for Total Wax Content of Corrugated Paperboard
- ASTM-D3652 - Standard Test Method for Thickness of Pressure-Sensitive Tapes
- ASTM-D3652M - Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes [Metric] (Withdrawn 1998)
- ASTM-D3654 - Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
- ASTM-D3715 - Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
- ASTM-D3759 - Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
- ASTM-D3811 - Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
- ASTM-D3812 - Test Method for Impact Resistance of Pressure-Senstive Tapes (Withdrawn 1984)
- ASTM-D3813 - Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
- ASTM-D3815 - Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
- ASTM-D3816 - Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
- ASTM-D3833 - Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
- ASTM-D3889 - Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
- ASTM-D3892 - Standard Practice for Packaging/Packing of Plastics
- ASTM-D3950 - Standard Specification for Strapping, Nonmetallic (and Joining Methods)
- ASTM-D3953 - Standard Specification for Strapping, Flat Steel and Seals
- ASTM-D3981 - Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
- ASTM-D4003 - Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
- ASTM-D4168 - Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
- ASTM-D4169 - Standard Practice for Performance Testing of Shipping Containers and Systems
- ASTM-D4279 - Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods
- ASTM-D4504 - Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
- ASTM-D4521 - Standard Test Method for Coefficient of Static Friction of Corrugated and Solid Fiberboard (Withdrawn 2001)
- ASTM-D4577 - Standard Test Method for Compression Resistance of a Container Under Constant Load
- ASTM-D4649 - Standard Guide for Use of Stretch Films and Wrapping Application
- ASTM-D4675 - Standard Guide for Selection and Use of Flat Strapping Materials1
- ASTM-D4727 - Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
- ASTM-D4728 - Standard Test Method for Random Vibration Testing of Shipping Containers
- ASTM-D4919 - Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
- ASTM-D5077 - Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
- ASTM-D5105 - Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
- ASTM-D5168 - Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
- ASTM-D5330 - Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
- ASTM-D5414 - Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- ASTM-D5415 - Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
- ASTM-D5416 - Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
- ASTM-D5458 - Standard Test Method for Peel Cling of Stretch Wrap Film
- ASTM-D5459 - Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
- ASTM-D5486 - Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
- ASTM-D5488 - Standard Terminology of Environmental Labeling of Packaging Materials and Packages (Withdrawn 2002)
- ASTM-D5570 - Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
- ASTM-D5749 - Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
- ASTM-D5750 - Standard Guide for Width and Length of Pressure-Sensitive Tape
- ASTM-D5814 - Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
- ASTM-D6537 - Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
- ASTM-D7660 - Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
- ASTM-D782 - Test Methods for Shipping Containers in Revolving Hexagonal Drum (Withdrawn 1999)
- ASTM-D7887 - Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
- ASTM-D7932 - Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
- ASTM-D8233 - Standard Guide for Packaging and Labeling of Consumer Resin Cannabis Products for Sale to Adult Consumers, Legally Authorized Medical Users, and Caregivers in a Business-to-Consumer Retail Environment (Retailers)
- ASTM-D880 - Standard Test Method for Impact Testing for Shipping Containers and Systems
- ASTM-D895 - Standard Test Method for Water Vapor Permeability of Packages (Withdrawn 1999)
- ASTM-D951 - Standard Test Method for Water Resistance of Shipping Containers by Spray Method
- ASTM-D998 - Standard Test Method for Penetration of Liquids into Submerged Loaded Shipping Containers (Withdrawn 1999)
- ASTM-D999 - Standard Test Methods for Vibration Testing of Shipping Containers
- ASTM-E1870 - Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film
- ASTM-E1974 - Standard Specification for Shelter, Electrical Equipment S-250/G
- ASTM-E1975 - Standard Specification for Shelter, Electrical, Equipment S-280/G
- ASTM-E2230 - Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
- ASTM-E2609 - Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging
- ASTM-E398 - Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
- ASTM-E619 - Standard Practice for Evaluating Foreign Odors in Paper Packaging
- ASTM-F1115 - Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
- ASTM-F119 - Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
- ASTM-F1306 - Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
- ASTM-F1327 - Standard Terminology Relating to Barrier Materials for Medical Packaging (Withdrawn 2007)
- ASTM-F1608 - Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
- ASTM-F1640 - Standard Guide for Selection and Use of Contact Materials for Foods to Be Irradiated
- ASTM-F17 - Standard Terminology Relating to Primary Barrier Packaging
- ASTM-F1884 - Standard Test Methods for Determining Residual Solvents in Packaging Materials
- ASTM-F1886 - Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
- ASTM-F1929 - Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
- ASTM-F2054 - Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
- ASTM-F2095 - Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
- ASTM-F2096 - Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
- ASTM-F2168 - Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
- ASTM-F2191 - Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
- ASTM-F2251 - Standard Test Method for Thickness Measurement of Flexible Packaging Material
- ASTM-F2391 - Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
- ASTM-F2467 - Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
- ASTM-F2468 - Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
- ASTM-F2524 - Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications
- ASTM-F2638 - Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
- ASTM-F2824 - Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
- ASTM-F2825 - Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
- ASTM-F3004 - Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
- ASTM-F3039 - Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
- ASTM-F3169 - Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
- ASTM-F3287 - Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
- ASTM-F3300 - Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
- ASTM-F34 - Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
- ASTM-F372 - Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique (Withdrawn 2009)
- ASTM-F392 - Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability
- ASTM-F88 - Standard Test Method for Seal Strength of Flexible Barrier Materials
- ASTM-F99 - Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
- ASTM-PS65 - Specification for Shelter, Electrical Equipment S-250/G (Withdrawn 1998)
- ASTM-PS66 - Specification for Shelter, Electrical Equipment S-280 ( )/G (Withdrawn 1998)
- ASTM-PS79 - Provisional Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners (Withdrawn 2000)
BSI:
- BS-11130 - Cardboard baby boxes for domestic use. Safety requirements and test methods
- BS-1133-12 - Methods of Protection Against Shock (Excluding Cushioning Devices)
- BS-1133-14 - Adhesive Closing and Sealing Tapes
- BS-1133-15 - Packaging code
- BS-1133-16 - Adhesives for Packaging
- BS-1133-18-18 - Packaging code. Glass containers and closures
- BS-1133-19 - Packaging code
- BS-1133-19.19 - Packaging code. Use of desiccants in packaging
- BS-1133-21 - Packaging code
- BS-1133-22 - Packaging code
- BS-1133-22-22 - Packaging code. Packaging in plastics containers
- BS-1133-7.1 - Wrapping Papers
- BS-1133-7.6 - Packaging code. Paper and board wrappers, bags and containers
- BS-1683 - Specification for coated aluminium foil for wrapping processed cheese
- BS-2540 - Specification for granular desiccant silica gel
- BS-2548 - Specification for wood wool for general packaging purposes
- BS-2837 - Specification for steel links and strap assemblies for lifting attachments for packing cases
- BS-2982 - Specification for materials and packaging of surgical scalpels with detachable blades
- BS-3130-2 - Glossary of packaging terms
- BS-3130-5 - Glossary of packaging terms
- BS-3177 - Method for determining the permeability to water vapour of flexible sheet materials used for packaging
- BS-3313-1 - Specification for aluminium capping foil and strip for dairy product containers
- BS-3313-2 - Aluminium Capping Foil for Skirted Closures for Plastics Containers
- BS-4781 - Specification for pressure-sensitive adhesive plastics labels for permanent use
- BS-4781-1 - Specification for self-adhesive plastics labels for permanent use
- BS-4781-2 - Specification for self-adhesive plastics labels for permanent use
- BS-4818 - Method for determination of the creasing quality of carton board (Pira method)
- BS-5609 - Specification for printed pressure-sensitive, adhesive-coated labels for marine use, including requirements for label base material
- BS-7116 - Specification for double sided pressure sensitive adhesive tapes
- BS-7539 - Methods for test for determination of properties of cushioning materials for package design purposes
- BS-7948-1 - Films for wrapping rubber bales.
- BS-8404 - Packaging. Child-resistant packaging. Requirements and testing procedures for non-reclosable packages for pharmaceutical products
- BS-EN-12246 - Quality classification of timber used in pallets and packaging
- BS-EN-1230-1 - Paper and board intended to come into contact with foodstuffs. Sensory analysis
- BS-EN-1230-2 - Paper and board intended to come into contact with foodstuffs. Sensory analysis
- BS-EN-13246 - Packaging. Specification for tensional steel strapping
- BS-EN-13247 - Packaging. Specification for tensional strapping for lifting, lashing and securing of loads
- BS-EN-13393 - Packaging. Specification for edge protectors
- BS-EN-13394 - Packaging. Specification for non-metallic tensional strapping
- BS-EN-13440 - Packaging. Rate of recycling. Definition and method of calculation
- BS-EN-13628-1 - Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography
- BS-EN-13628-2 - Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography
- BS-EN-14477 - Packaging. Flexible packaging material. Determination of puncture resistance. Test methods
- BS-EN-14479 - Packaging. Flexible packaging material. Determination of residual solvents by dynamic headspace gas chromatography. Absolute method
- BS-EN-14806 - Packaging. Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
- BS-EN-14932 - Plastics. Thermoplastic stretch films for wrapping silage bales
- BS-EN-15507 - Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades
- BS-EN-15507-TC - Tracked Changes. Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades
- BS-EN-17428 - Packaging. Determination of the degree of disintegration under simulated home composting conditions
- BS-EN-868-10 - Packaging for terminally sterilized medical devices
- BS-EN-868-2 - Packaging for terminally sterilized medical devices
- BS-EN-868-3 - Packaging for terminally sterilized medical devices
- BS-EN-868-4 - Packaging for terminally sterilized medical devices
- BS-EN-868-5 - Packaging for terminally sterilized medical devices
- BS-EN-868-5-TC - Tracked Changes. Packaging for terminally sterilized medical devices
- BS-EN-868-6 - Packaging for terminally sterilized medical devices
- BS-EN-868-6-TC - Tracked Changes. Packaging for terminally sterilized medical devices
- BS-EN-868-7 - Packaging for terminally sterilized medical devices
- BS-EN-868-9 - Packaging for terminally sterilized medical devices
- BS-EN-ISO-16103 - Packaging. Transport packages for dangerous goods. Recycled plastics material
- BS-ISO-24259 - Steel strapping for packaging
- PAS-103 - Collected Waste Plastics Packaging, Specification for Quality & Guidance for Good Prac
- PAS-377 - Consumables used in the collection, preservation and processing of material for forensic analysis. Product, manufacturing and forensic kit assembly. Specification
- PAS-420 - Product safety management system for the manufacturing of home and/or personal care products and the raw/packaging materials used for their manufacture. Specification
- PD-CEN-17523 - Postal services. Packaging for boxable items. Characteristics for packaging of small and light weight items to be delivered into the consumer's letterbox
- PD-CR-14376 - Adhesives. Ahesives for paper and board, packaging and disposable sanitary products. Description and assessment of the setting process
ISO:
Other SDOs:
- DIN-55545-1 - Part 1: Initial Evaluation Testing, Packaging - Packaging With Insulating Properties
- DIN-EN-1230-2 - Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint); German version EN 1230-2:2009
- DIN-EN-14806 - Packaging, Preliminary Evaluation of the Disintegration of Packaging Materials Under S
- DIN-EN-14932 - Plastics - Stretch Thermoplastic Films for Wrapping Bales - Requirements & Test Metho
- EN-1230-1 - Part 1: Odour, Paper & Board Intended To Come Into Contact With Foodstuffs - Sensory A
- EN-1230-2 - Part 2: off-Flavour (Taint), Paper & Board Intended To Come Into Contact With Foodstu
- EN-14479 - Packaging, Flexible Packaging Material, Determination of Residual Solvents by Dynamic
- EN-14806 - Packaging, Preliminary Evaluation of the Disintegration of Packaging Materials Under S
- EN-14932 - Plastics - Stretch Thermoplastic Films for Wrapping Bales - Requirements & Test Metho
- EN-15507 - Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
- EN-15519 - Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
- EN-15946 - Conservation of cultural property - Packing principles for transport
- EN-868-10 - Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods
- EN-868-2 - Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods
- EN-868-3 - Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
- EN-868-4 - Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods
- EN-868-5 - Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- EN-868-6 - Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
- EN-868-7 - Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
- EN-868-9 - Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods
- JIS-Z-0240 - Structural cushioning materials for packaging -- Determination of cushioning performance
- JIS-Z-1527 - Polypropylene band
- SIS-CEN-ISO/TS-16775 - Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2021)
- SIS-CEN/TR-16353 - Packaging - Safety guidelines for flexible plastic packaging to minimize the risk of suffocation to children
- SIS-CEN/TS-16892 - Plastics - Welding of thermoplastics - Specification of welding procedures
- SIS-EN-ISO-11607-1 - Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006)
- SIS-EN-ISO-11607-2 - Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006)
- SS-843001 - Corrugated fibreboard
- SS-843002 - Corrugated fibreboard - Sampling and inspection of corrugated fibre board boxes, construction details etc.
- SS-EN-1230-1 - Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour
- SS-EN-1230-2 - Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
- SS-EN-13010 - Packaging - Unit packaging - Dimensions and requirements for pegboard display
- SS-EN-13246 - Packaging - Specification for tensional steel strapping
- SS-EN-13247 - Packaging - Specification for tensional strapping for lifting, lashing and securing of loads
- SS-EN-13393 - Packaging - Specification for Edge protectors
- SS-EN-13394 - Packaging - Specification for non-metallic tensional strapping
- SS-EN-13428 - Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
- SS-EN-13429 - Packaging - Reuse
- SS-EN-13430 - Packaging - Requirements for packaging recoverable by material recycling
- SS-EN-13431 - Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
- SS-EN-13432 - Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
- SS-EN-13437 - Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart
- SS-EN-13440 - Packaging - Rate of recycling - Definition and method of calculation
- SS-EN-13628-1 - Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods
- SS-EN-13628-2 - Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods
- SS-EN-13676 - Polymer coated paper and board intended for food contact - Detection of pinholes
- SS-EN-13891 - Tensional strapping - Guide to selection and use of tensional strapping
- SS-EN-14045 - Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
- SS-EN-14046 - Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions- Method by analysis of released carbon dioxide
- SS-EN-14391 - Packaging - Collapsible aluminium tubes - Tactile warnings of danger
- SS-EN-14477 - Packaging - Flexible packaging material - Determination of puncture resistance - Test methods
- SS-EN-14479 - Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method
- SS-EN-14806 - Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test
- SS-EN-14932 - Plastics - Thermoplastic stretch films for wrapping silage bales
- SS-EN-15507 - Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
- SS-EN-15519 - Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
- SS-EN-15946 - Conservation of cultural property - Packing principles for transport
- SS-EN-17427 - Packaging - Requirements and test scheme for carrier bags suitable for treatment in well-managed home composting installations
- SS-EN-1898 - Specifications for flexible intermediate bulk containers (FIBCs) for non-dangerous goods
- SS-EN-868-1 - Packaging materials and systems for medical devices which are to be sterilized - Part 1: General requirements and test methods
- SS-EN-868-10 - Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods
- SS-EN-868-2 - Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods
- SS-EN-868-3 - Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
- SS-EN-868-4 - Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods
- SS-EN-868-5 - Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
- SS-EN-868-6 - Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
- SS-EN-868-7 - Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
- SS-EN-868-8 - Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
- SS-EN-868-9 - Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods
- SS-EN-ISO-11607-1 - Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2019)
- SS-EN-ISO-11607-1-AM11 - Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2019)
- SS-EN-ISO-21898 - Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004)
- SS-EN-ISO-5267-1 - Pulps - Determination of drainability - Part 1: Schopper-Riegler method (ISO 5267-1:1999)
- STG-TR-109 - Krav för mätning och kontroll av tungmetaller och andra farliga substanser i förpackningar samt deras utsläpp till miljön - Del 1: Krav för mätning och kontroll för de fyra tungmetaller som är aktuella i förpackningar (CEN/CR 13695-1:2000)
- UNE-EN-15946 - Conservation of cultural property - Packing principles for transport.