Document Center List of Standards on Bottles. Pots. Jars Small Containers For Liquids And Their Closures
ICS Code 55.100
Return to ICS Index.Up to Level 1:
The following documents are a part of this series:
ASTM:
- ASTM-C147 - Standard Test Methods for Internal Pressure Strength of Glass Containers
- ASTM-C224 - Standard Practice for Sampling Glass Containers
- ASTM-D2741 - Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation (Withdrawn 2011)
- ASTM-D2911 - Standard Specification for Dimensions and Tolerances for Plastic Bottles
- ASTM-D3844 - Standard Guide for Labeling Chlorinated Hydrocarbon Solvent Containers (Withdrawn 2013)
- ASTM-D4267 - Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers (Withdrawn 2022)
- ASTM-D4316 - Standard Specification for Elastomeric Water Bottles
- ASTM-D4509 - Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles (Withdrawn 2005)
- ASTM-D6699 - Standard Practice for Sampling Liquids Using Bailers
- ASTM-F2013 - Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
BSI:
- BS-1133-18 - Packaging code. Packaging in glass
- BS-1679-4 - Specification for containers for pharmaceutical dispensing. Plastics containers for tablets and ointments
- BS-1679-6 - Containers for pharmaceutical dispensing
- BS-1679-7 - Specification for containers for pharmaceutical dispensing
- BS-1679-8 - Containers for pharmaceutical dispensing
- BS-1918-1 - Glass container finishes
- BS-1918-2 - Glass container finishes. Specification for crown finish
- BS-4602 - Specification for the use of metric units in specifications for glass containers and finishes
- BS-4851 - Specification for single use labelled medical specimen containers for haematology and biochemistry.
- BS-5928 - Specification for bottles for laboratory use
- BS-6106 - Specification for 1 pint (568 ml) multi-trip glass bottles for pasteurized milk
- BS-6117 - Specification for glass bottles for light wine
- BS-6118 - Specification for multi-trip glass bottles for beer and cider
- BS-6119-1 - Glass bottles for carbonated soft drinks
- BS-7367 - Specification for manufacture of glass bottles for carbonated soft drinks including carbonated water
- BS-7488 - Recommendations for handling glass bottles, containing carbonated soft drinks or carbonated water, in filling plants, warehouses, and retailers' premises
- BS-EN-12726 - Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
- BS-EN-13972 - Rigid plastic containers. Definition of nominal, brimful and total capacity and measurement of brimful and total capacity
- BS-EN-13973 - Rigid plastics containers. Method for determination of drainability
- BS-EN-13974 - Rigid plastics containers. Specification of tolerance for dimensions, weight and volume
- BS-EN-14634 - Glass packaging. 26 H 180 crown finish. Dimensions
- BS-EN-14635 - Glass packaging. 26 H 126 crown finish. Dimensions
- BS-EN-14798 - Glass packaging. Hand-held crown bottle openers. Dimensions
- BS-EN-14887 - Glass packaging. Cork removal devices. General requirements
- BS-EN-15543 - Glass packaging. Finishes for bottles. Screw thread finishes for bottles for non-carbonated liquids
- BS-EN-15904 - Glass packaging. Standard tolerances for flaconnage
- BS-EN-16063 - Packaging. Rigid plastic containers. Nomenclature of plastic finishes
- BS-EN-16064 - Packaging. Rigid plastic containers. PET finish 30/25 H (18,5)
- BS-EN-16065 - Packaging - Rigid plastic containers. PET finish 30/25 Low (16,8)
- BS-EN-16066 - Packaging. Rigid plastic containers. PET finish 26,7 (lead 6,35)
- BS-EN-16067 - Packaging. Rigid plastic Containers. PET finish 26,7 (lead 9,00)
- BS-EN-16068 - Packaging. Rigid plastic containers. PET finish 38
- BS-EN-16287-1 - Glass packaging. Screw finishes for pressure capsules
- BS-EN-16287-2 - Glass packaging. Screw finishes for pressure capsules
- BS-EN-16288-1 - Glass packaging. Screw finishes for pressure capsules
- BS-EN-16288-2 - Glass packaging. Screw finishes for pressure capsules
- BS-EN-16289 - Glass packaging. Screw finishes for pressure capsules. MCA 7,5 RF finish
- BS-EN-16290-1 - Glass packaging. Screw finishes for pressure capsules
- BS-EN-16290-2 - Glass packaging. Screw finishes for pressure capsules
- BS-EN-16291-1 - Glass packaging. Screw finishes for pressure capsules
- BS-EN-16291-2 - Glass packaging. Screw finishes for pressure capsules
- BS-EN-16292 - Glass packaging. Screw finishes. Depressed threads
- BS-EN-16293 - Packaging. Glass Packaging. Deep BVS finishes for still wines
- BS-EN-16592 - Packaging. Rigid plastic containers. PET finish 29/25 (12,6)
- BS-EN-16593 - Packaging. Rigid plastic containers. PET finish BVS 30H60
- BS-EN-16594 - Packaging. Rigid plastic containers. PET finish 26/22 (12,0)
- BS-EN-17177 - Glass packaging. Crown cap. 26 mm diameter, 6 mm height crown cap
- BS-EN-17665 - Packaging. Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers
- BS-EN-ISO-12818 - Glass packaging. Standard tolerances for flaconnage
- BS-EN-ISO-12821 - Glass packaging. 26 H 180 crown finish. Dimensions
- BS-EN-ISO-12822 - Glass packaging. 26 H 126 crown finish. Dimensions
- BS-EN-ISO-12822-TC - Tracked Changes. Glass packaging. 26 H 126 crown finish. Dimensions
- BS-EN-ISO-7458 - Glass containers. Internal pressure resistance. Test methods
- BS-EN-ISO-8106 - Glass containers. Dermination of capacity by gravimetric method. Test method
- BS-EN-ISO-8113 - Glass containers. Resistance to vertical load. Test method
- BS-EN-ISO-9100-1 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-10 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-11 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-12 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-13 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-14 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-2 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-3 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-4 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-5 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-6 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-7 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-8 - Glass containers. Vacuum lug finishes
- BS-EN-ISO-9100-9 - Glass containers. Vacuum lug finishes
- BS-ISO-10106 - Cork stoppers. Determination of global migration
- BS-ISO-10106-TC - Tracked Changes. Cork stoppers. Determination of global migration
- BS-ISO-10718 - Cork stoppers. Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium
- BS-ISO-12818 - Glass packaging. Standard tolerances for flaconnage
- BS-ISO-12821 - Glass packaging. 26 H 180 crown finish. Dimensions
- BS-ISO-12822 - Glass packaging. 26 H 126 crown finish. Dimensions
- BS-ISO-16419 - Cork. Visual anomalies of cork stoppers for still wines
- BS-ISO-16420 - Cork. Cork stoppers for still wines. Mechanical and physical specifications
- BS-ISO-17727 - Cork. Cork stoppers for still wine. Sampling plan for the quality control of cork stoppers
- BS-ISO-21128 - Cork stoppers. Determination of oxidizing residues. Iodometric titration method
- BS-ISO-4710 - Cork. Cylindrical stoppers for sparkling wines and gasified wines. Characteristics
- BS-ISO-8106 - Glass containers. Dermination of capacity by gravimetric method. Test method
- BS-ISO-9056 - Glass containers. Series of pilferproof finish. Dimensions
- BS-ISO-9057 - Glass containers. 28mm tamper-evident finish for pressurized liquids. Dimensions
- BS-ISO-9058 - Glass containers. Standard tolerances for bottles
- BS-ISO-9727-1 - Cylindrical cork stoppers. Physical tests
- BS-ISO-9727-2 - Cylindrical cork stoppers. Physical tests
- BS-ISO-9727-3 - Cylindrical cork stoppers. Physical tests
- BS-ISO-9727-4 - Cylindrical cork stoppers. Physical tests
- BS-ISO-9727-5 - Cylindrical cork stoppers. Physical tests
- BS-ISO-9727-6 - Cylindrical cork stoppers. Physical tests
- BS-ISO-9727-7 - Cylindrical cork stoppers. Physical tests
- BS-ISO-9727-8 - Cylindrical cork stoppers. Physical tests
ISO:
- ISO-10106 - Cork stoppers - Determination of global migration
- ISO-10718 - Cork stoppers - Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium
- ISO-12818 - Glass packaging - Standard tolerances for flaconnage
- ISO-12821 - Glass packaging - 26 H 180 crown finish - Dimensions
- ISO-12822 - Glass packaging - 26 H 126 crown finish - Dimensions
- ISO-16419 - Cork - Visual anomalies of cork stoppers for still wines
- ISO-16420 - Cork - Cork stoppers for still wines - Mechanical and physical specifications
- ISO-17727 - Cork -Cork stoppers for still wine - Sampling plan for the quality control of cork stoppers
- ISO-21128 - Cork stoppers - Determination of oxidizing residues - Iodometric titration method
- ISO-3863 - Cylindrical cork stoppers -- Dimensional characteristics, sampling, packaging and marking
- ISO-4707 - Cork -- Stoppers -- Sampling for inspection of dimensional characteristics
- ISO-4710 - Cork - Cylindrical stoppers for sparkling wines and gasified wines - Characteristics
- ISO-7348 - Glass containers -- Manufacture -- Vocabulary
- ISO-7458 - Glass containers - Internal pressure resistance - Test methods
- ISO-7459 - Glass containers - Thermal shock resistance and thermal shock endurance - Test methods
- ISO-8106 - Glass containers - Determination of capacity by gravimetric method - Test method
- ISO-8113 - Glass containers - Resistance to vertical load - Test method
- ISO-9008 - Glass bottles -- Verticality -- Test method
- ISO-9009 - Glass containers -- Height and non-parallelism of finish with reference to container base -- Test methods
- ISO-9057 - Glass containers -- 28 mm tamper-evident finish for pressurized liquids -- Dimensions
- ISO-9058 - Glass containers - Standard tolerances for bottles
- ISO-9100-1 - Glass containers - Vacuum lug finishes - Part 1: General
- ISO-9100-10 - Glass containers - Vacuum lug finishes - Part 10: 77 regular
- ISO-9100-11 - Glass containers - Vacuum lug finishes - Part 11: 82 regular
- ISO-9100-12 - Glass containers - Vacuum lug finishes - Part 12: 89 regular
- ISO-9100-13 - Glass containers - Vacuum lug finishes - Part 13: 100 regular
- ISO-9100-14 - Glass containers - Vacuum lug finishes - Part 14: 110 regular
- ISO-9100-2 - Glass containers - Vacuum lug finishes - Part 2: 33 medium
- ISO-9100-3 - Glass containers - Vacuum lug finishes - Part 3: 38 regular
- ISO-9100-4 - Glass containers - Vacuum lug finishes - Part 4: 38 medium
- ISO-9100-5 - Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular
- ISO-9100-6 - Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular
- ISO-9100-7 - Glass containers - Vacuum lug finishes - Part 7: 58 deep
- ISO-9100-8 - Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular
- ISO-9100-9 - Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep
- ISO-9727-1 - Cylindrical cork stoppers - Physical tests - Part 1: Determination of dimensions
- ISO-9727-2 - Cylindrical cork stoppers - Physical tests - Part 2: Determination of mass and apparent density for agglomerated cork stoppers
- ISO-9727-3 - Cylindrical cork stoppers - Physical tests - Part 3: Determination of humidity content
- ISO-9727-4 - Cylindrical cork stoppers - Physical tests - Part 4: Determination of dimensional recovery after compression
- ISO-9727-5 - Cylindrical cork stoppers - Physical tests - Part 5: Determination of extraction force
- ISO-9727-6 - Cylindrical cork stoppers - Physical tests - Part 6: Determination of liquid tightness
- ISO-9727-7 - Cylindrical cork stoppers - Physical tests - Part 7: Determination of dust content
- ISO-9727-8 - Cylindrical cork stoppers - Physical tests - Part 8: Determination of capillarity
- ISO-9885 - Wide-mouth glass containers -- Deviation from flatness of top sealing surface -- Test methods
Other SDOs:
- DIN-6063-1 - Part 1: Buttress Threads, Dimensions, Threads, Mainly for Plastic Cotainers
- DIN-6063-2 - Part 2: Trapezoidal Screw Threads, Dimensions, Threads, Mainly for Plastic Containers
- DIN-EN-14634 - Glass packaging - 26 H 180 crown finish - Dimensions; German version EN 14634:2010
- DIN-EN-14635 - Glass Packaging - 26 H 126 Crown Finish - Dimensions
- DIN-EN-14798 - Glass Packaging - Hand-Held Crown Bottle Openers - Dimensions
- DIN-EN-14887 - Glass Packaging - Cork Removal Devices - General Requirements
- DIN-EN-ISO-7458 - Glass Containers, Internal Pressure Resistance - Test Methods
- DIN-EN-ISO-7459 - Glass Containers, Thermal Shock Resistance & Thermal Shock Endurance - Test Methods
- DIN-EN-ISO-8106 - Glass Containers, Determination of Capacity by Gravimetric Method - Test Method
- DIN-EN-ISO-8113 - Glass Containers, Resistance To Vertical Load - Test Method
- DIN-EN-ISO-9100-1 - Part 1: General, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-10 - Part 10: 77 Regular, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-11 - Part 11: 82 Regular, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-12 - Part 12: 89 Regular, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-13 - Part 13: 100 Regular, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-14 - Part 14: 110 Regular, Glass Containers - Vacuum Lug Finishes
- DIN-EN-ISO-9100-2 - Part 2: 33 Medium, Glass Conatiners - Vacuum Lug Finishes
- DIN-EN-ISO-9100-3 - Part 3: 38 Regular, Glass Containers - Vacuum Lug Finishes
- DIN-EN-ISO-9100-4 - Part 4: 38 Medium, Glass Containers - Vacuum Lug Finishes
- DIN-EN-ISO-9100-5 - Part 5: 43 & 48 Regular, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-6 - Part 6: 53 & 58 Regular, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-7 - Part 7: 58 Deep, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-8 - Part 8: 63, 66 & 70 Regular, Glass Containers, Vacuum Lug Finishes
- DIN-EN-ISO-9100-9 - Part 9: 63, 66 & 70 Deep, Glass Containers, Vacuum Lug Finishes
- EN-14634 - Glass Packaging - 26 H 180 Crown Finish - Dimensions
- EN-14635 - Glass Packaging - 26 H 126 Crown Finish - Dimensions
- EN-14798 - Glass Packaging - Hand-Held Crown Bottle Openers - Dimensions
- EN-14887 - Glass Packaging - Cork Removal Devices - General Requirements
- EN-15543 - Glass Packaging - Finishes for Bottles - Screw Thread Finishes for Bottles for Non-Car
- EN-16063 - Packaging - Rigid plastic containers - Nomenclature of plastic finishes
- EN-16064 - Packaging - Rigid plastic containers - PET finish 30/25 High (18,5)
- EN-16065 - Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8)
- EN-16066 - Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35)
- EN-16067 - Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00)
- EN-16068 - Packaging - Rigid plastic containers - PET finish 38
- EN-16287-1 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 1 finish
- EN-16287-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 1 finish
- EN-16288-1 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 3 finish
- EN-16288-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish
- EN-16289 - Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish
- EN-16290-1 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 7,5 R finish
- EN-16290-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 7,5 R finish
- EN-16291-1 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish
- EN-16291-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
- EN-16292 - Glass packaging - Screw finishes - Depressed threads
- EN-16293 - Packaging - Glass Packaging - Deep BVS finishes for still wines
- EN-16592 - Packaging - Rigid plastic containers - PET finish 29/25 (12,6)
- EN-16593 - Packaging - Rigid plastic containers - PET finish BVS 30H60
- EN-16594 - Packaging - Rigid plastic containers - PET finish 26/22 (12,0)
- EN-ISO-12818 - Glass packaging - Standard tolerances for flaconnage
- EN-ISO-12821 - Glass packaging - 26 H 180 crown finish - Dimensions
- EN-ISO-8106 - Glass Containers, Determination of Capacity by Gravimetric Method - Test Method
- EN-ISO-9100-1 - Part 1: General, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-10 - Part 10: 77 Regular, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-11 - Part 11: 82 Regular, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-12 - Part 12: 89 Regular, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-13 - Part 13: 100 Regular, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-14 - Part 14: 110 Regular, Glass Containers - Vacuum Lug Finishes
- EN-ISO-9100-2 - Part 2: 33 Medium, Glass Containers - Vacuum Lug Finishes
- EN-ISO-9100-3 - Part 3: 38 Regular, Glass Containers - Vacuum Lug Finishes
- EN-ISO-9100-4 - Part 4: 38 Medium, Glass Containers - Vacuum Lug Finishes
- EN-ISO-9100-5 - Part 5: 43 & 48 Regular, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-6 - Part 6: 53 & 58 Regular, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-7 - Part 7: 58 Deep, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-8 - Part 8: 63, 66 & 70 Regular, Glass Containers, Vacuum Lug Finishes
- EN-ISO-9100-9 - Part 9: 63, 66 & 70 Deep, Glass Containers, Vacuum Lug Finishes
- SS-845148 - Glas jars - Finish for snap-on jars
- SS-845150 - Glass jars - Medicine jars for snap-on caps
- SS-845314 - Glass bottles - Medicine bottles - Finish for snap-on closure
- SS-845315 - Glass bottles - Medicine bottles - Finish for screw cap closure
- SS-845321 - Glass bottles - Infusion equipment - Light weightinfusion bottles
- SS-EN-12726 - Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
- SS-EN-13972 - Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity
- SS-EN-13973 - Rigid plastics containers - Method for determination of drainability
- SS-EN-13974 - Rigid plastic containers - Specification of tolerance for dimensions, weight and volume
- SS-EN-14634 - Glass packaging - 26 H 180 crown finish - Dimensions
- SS-EN-14635 - Glass packaging - 26 H 126 crown finish - Dimensions
- SS-EN-14798 - Glass packaging - Hand-held crown bottle openers - Dimensions
- SS-EN-14887 - Glass packaging - Cork removal devices - Recommendations
- SS-EN-15543 - Glass packaging - Finishes for bottles - Screw thread finishes for bottles for non-carbonated liquids
- SS-EN-15904 - Glass packaging - Standard tolerances for flaconnage
- SS-EN-16063 - Packaging - Rigid plastic containers - Nomenclature of plastic finishes
- SS-EN-16064 - Packaging - Rigid plastic containers - PET finish 30/25 High (18,5)
- SS-EN-16065 - Packaging - Rigid plastic containers - PET finish 30/25 Low (16,8)
- SS-EN-16066 - Packaging - Rigid plastic containers - PET finish 26,7 (lead 6,35)
- SS-EN-16067 - Packaging - Rigid plastic containers - PET finish 26,7 (lead 9,00)
- SS-EN-16068 - Packaging - Rigid plastic containers - PET finish 38
- SS-EN-16287-1 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 1 finish
- SS-EN-16287-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 1 finish
- SS-EN-16288-1 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 3 finish
- SS-EN-16288-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish
- SS-EN-16289 - Glass packaging - Screw finishes for pressure capsules - MCA 7,5 RF finish
- SS-EN-16290-1 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 7,5 R finish
- SS-EN-16290-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 7,5 R finish
- SS-EN-16291-1 - Glass packaging - Screw finishes for pressure capsules - Part 1: Returnable glass MCA 2 finish
- SS-EN-16291-2 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
- SS-EN-16292 - Glass packaging - Screw finishes - Depressed threads
- SS-EN-16293 - Packaging - Glass Packaging - Deep BVS finishes for still wines
- SS-EN-16592 - Packaging - Rigid plastic containers - PET finish 29/25 (12,6)
- SS-EN-16593 - Packaging - Rigid plastic containers - PET finish BVS 30H60
- SS-EN-16594 - Packaging - Rigid plastic containers - PET finish 26/22 (12,0)
- SS-EN-17177 - Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap
- SS-EN-17665 - Packaging - Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers
- SS-EN-17827 - Glass packaging - Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm)
- SS-EN-17829 - Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
- SS-EN-29008 - Glass bottles - Verticality - Test method (ISO 9008:1991)
- SS-EN-29009 - Glass containers - Height and non-parallelism of finish with reference to container base - Test methods (ISO 9009:1991)
- SS-EN-29885 - Wide mouth glass containers - Deviation from top sealing surface - Test methods (ISO 9885:1991)
- SS-EN-76 - Packages for certain prepacked foodstuffs - Capacities of glass and metal containers
- SS-EN-ISO-12818 - Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
- SS-EN-ISO-12821 - Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)
- SS-EN-ISO-7458 - Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004)
- SS-EN-ISO-7459 - Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO 7459:2004)
- SS-EN-ISO-8106 - Glass containers - Determination of capacity by gravimetric method - Test method (ISO 8106:2004)
- SS-EN-ISO-8113 - Glass containers - Resistance to vertical load - Test method (ISO 8113:2004)
- SS-EN-ISO-9100-1 - Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005)
- SS-EN-ISO-9100-10 - Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005)
- SS-EN-ISO-9100-11 - Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005)
- SS-EN-ISO-9100-12 - Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005)
- SS-EN-ISO-9100-13 - Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005)
- SS-EN-ISO-9100-14 - Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005)
- SS-EN-ISO-9100-2 - Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005)
- SS-EN-ISO-9100-3 - Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005)
- SS-EN-ISO-9100-4 - Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005)
- SS-EN-ISO-9100-5 - Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular (ISO 9100-5:2005)
- SS-EN-ISO-9100-6 - Glass containers - Vacuum lug finished - Part 6: 53 and 58 regular (ISO 9100-6:2005)
- SS-EN-ISO-9100-7 - Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005)
- SS-EN-ISO-9100-8 - Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular (ISO 9100-8:2005)
- SS-EN-ISO-9100-9 - Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep (ISO 9100-9:2005)
- SS-ISO-1436 - Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification (ISO 1436:2020, IDT)
- SS-ISO-4710 - Cork - Cylindrical stoppers for sparkling wines and gasified wines - Characteristics
- SS-ISO-9058 - Glass containers - Standard tolerances for bottles (ISO 9058:2008, IDT)